LG 42LG3000-ZA液晶电视用户手册

Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service. Extended Owner’s Manual that contains advanced fea- tures of these LG TV-sets is located on CD-ROM in electronic version. To read it You need to open chosen files by using Personal Computer (PC) equipped with CD-ROM drive. P/NO: MFL34441652 (0901-REV01) Printed in Korea LCD TV OWNER’S MANUAL Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) LCD TV MODELS 19LS4D* 22LS4D* 32LG20** 37LG20** 42LG20** 19LG30** 22LG30** 26LG30** 32LG30** 32LG32** 37LG30** 42LG30** 42LG32** 32LG5*** 37LG50** 42LG50** 47LG50** 52LG50** ID Number(s): 5499: 22LS4D-ZD 5507: 19LS4D-ZD 5629: 32LG2000-ZA 5721: 26LG3050-ZA 5630: 37LG2000-ZA 5631: 42LG2000-ZA 5088: 19LG3000-ZA 5090: 22LG3000-ZA 5080: 26LG3000-ZA 5089: 32LG3000-ZA 5087: 37LG3000-ZA 5086: 42LG3000-ZA 5085: 32LG5000-ZA 5084: 37LG5000-ZA 5083: 42LG5000-ZA 5082: 47LG5000-ZA 5081: 52LG5000-ZA 5385: 52LG5010-ZD 5386: 47LG5010-ZD 5387: 42LG5010-ZD 5388: 37LG5010-ZD 5389: 32LG5010-ZD 5390: 52LG5020-ZB 5391: 47LG5020-ZB 5392: 42LG5020-ZB 5393: 37LG5020-ZB 5394: 32LG5020-ZB 5395: 52LG5030-ZE 5396: 47LG5030-ZE 5397: 42LG5030-ZE 5398: 37LG5030-ZE 5399: 32LG5030-ZE 5671: 32LG5700-ZF 5820: 19LG3050-ZA 5818: 22LG3050-ZA 5879: 19LG3060-ZB 5880: 22LG3060-ZB 5878: 32LG5600-ZB 6507: 32LG3200-ZA 6511: 42LG3200-ZA Downloaded from www.Manualslib.com manuals search engine 2 CONNECTING YOUR UNIT ■ Image shown may differ from your TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * To connect an additional equipment, see the External equipment Setup section in CD Manual. COMPONENT IN VIDEO AUDIO RGB IN (PC) OPTICAL DIGITAL AUDIO OUT AV 1 AV 2 AV 1 AV 2 ANTENNA IN RS-232C IN (CONTROL & SERVICE) AUDIO IN (RGB/DVI) HDMI/DVI IN 2 1(DVI) COMPONENT IN VIDEO AUDIO ANTENNA IN USB IN SERVICE ONLY DVD/STB VCR Connection 2 Power Cord 3 1 Antenna Connection 2 Downloaded from www.Manualslib.com manuals search engine 3 ENGLISH ■ Image shown may differ from your TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * To connect an additional equipment, see the External equipment Setup section in CD Manual. AUDIO IN (RGB/DVI) Y PB PR L R VIDEO COMPONENT IN AUDIO EJECT PCMCIA CARD SLOT RS-232C IN (CONTROL & SERVICE) SERVICE ONLY RGB (PC) IN HDMI/DVI IN AV 1 AV 2 ANTENNA IN ANTENNA IN Y PB PR L R VIDEO COMPONENT IN AUDIO AV 1 AV 2 VCR Connection 2 Power Cord 3 1 Antenna Connection DVD/STB 2 Downloaded from www.Manualslib.com manuals search engine 4 SAFETY INSTRUCTIONS ENGLISH • Please read these safety precautions carefully before using the product. • In this manual, the illustration may be somewhat different from your product because it is just example to help the instruction. If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. If you ignore the caution message, you may be slightly injured or the product may be damaged. Precaution in Installing the Product WARNING WARNING CAUTION Keep away from heat sources like electrical heaters. - Electrical shock, fire, malfunction or deformation may occur. If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center. - If you continue to use without taking proper measures, elec- trical shock or fire can occur. Do not use the product in damp place such as a bath- room or any place where it is likely to get wet. - This may cause a fire or could give an electric shock. Install the product on a flat and stable place that has no risk of dropping the product. - If the product is dropped, you may be injured or the product may be broken. Keep the product away from direct sunlight. - The product can be damaged. Do not place the product in a built-in installation such as bookcase or rack. - Ventilation required. Electrical Power Related Precautions Make sure to connect the power cable to the ground- ed current. - You may be electrocuted or injured. Do not touch the power plug with wet hands. Additionally, it the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. - You may be electrocuted due to excess moisture. During a thunder or lightning storm, unplug the power cable or signal cable. - You may be electrocuted or a fire can break out. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Precautions in Moving the Product Do not shock the product when moving it. - You may be electrocuted or the product can be damaged. Make the panel face forward and hold it with both hands to move. - If you drop the product, the damaged product can cause elec- tric shock or fire. Contact with the service center for repair. Make sure to turn off the product. Make sure to remove all cables before moving the product. - You may be electrocuted or the product can be dam- aged. Precautions in Using the Product Do not disassemble, repair or modify the product at your own discretion. - Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normal- ly, or has been dropped. WARNING WARNING CAUTION CAUTION CAUTION CAUTION WARNING Do not keep a still image on the screen for an extended period (e.g. by pausing a video) as the fixed image may remian visible on the screen. This is known as image burn. Image burn is not covered under the manufacturer’s warranty. Downloaded from www.Manualslib.com manuals search engine 5 ENGLISH PREPARATION LCD TV Models : 32/37/42LG20**, 26/32/37/42LG30**, 32/42LG32**, 32/37/42/47/52LG5*** P MENU INPUT OK + - PROGRAMME VOLUME OK MENU INPUT FRONT PANEL CONTROLS ■ Image shown may differ from your TV. ■ If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth. Intelligent Sensor Adjusts picture according to the surrounding conditions. (32/37/42/47/52LG5*** only) POWER Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates blue when the TV is switched on. Note: You can adjust Power Indicator in the OPTION menu. INPUT MENU P - + OK PROGRAMME VOLUME MENU OK INPUT INPUT MENU VOL PR /I OK PROGRAMME VOLUME MENU OK INPUT POWER Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the TV is switched on. LCD TV Models : 19/22LS4D* LCD TV Models : 19/22LG30** Downloaded from www.Manualslib.com manuals search engine 6 ENGLISH PREPARATION RGB IN (PC) OPTICAL DIGITAL AUDIO OUT AV 1 AV 2 ANTENNA IN RS-232C IN (CONTROL & SERVICE) AUDIO IN (RGB/DVI) HDMI/DVI IN 2 1(DVI) COMPONENT IN VIDEO AUDIO AV IN 3 H/P L/MONO R AUDIO HDMI IN 3 PCMCIS CARD SLOT VIDEO S-VIDEO USB IN SERVICE ONLY Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. RGB/DVI Audio Input Connect the audio from a PC or DTV. DIGITAL AUDIO OUT OPTICAL (Except for 19/22LS4D*) Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks. HDMI Input Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. RGB IN (PC) Connect the output from a PC. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. Component Input Connect a component video/audio device to these jacks. Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) Audio/Video Input (Except for 19/22LS4D*) Connect audio/video output from an external device to these jacks. S-VIDEO (Except for 19/22LS4D*, 32/37/42LG20**, 32/42LG32**) Connect S-Video out from an S-VIDEO device. Headphone Socket (Except for 19/22LS4D*, 32/37/42LG20**, 32/42LG32**) Connect the headphone plug to this socket. SERVICE ONLY PORT 1 2 3 4 5 6 7 8 9 10 11 12 13 2 13 4 3 AV IN 3 H/P L/MONO R AUDIO AUDIO HDMI IN 3 HDMI IN 3 PCMCIA CARD SLOT PCMCIA CARD SLOT VIDEO VIDEO S-VIDEO 9 5 6 7 8 10 5 11 12 BACK PANEL INFORMATION A Image shown may differ from your TV. AUDIO IN (RGB/DVI) Y PB PR L R VIDEO COMPONENT IN AUDIO EJECT PCMCIA CARD SLOT RS-232C IN (CONTROL & SERVICE) SERVICE ONLY RGB (PC) IN HDMI/DVI IN AV 1 AV 2 ANTENNA IN 10 2 5 9 7 8 13 4 6 1 Except for 32/37/42LG20**, 32/42LG32** Downloaded from www.Manualslib.com manuals search engine 7 ENGLISH 1 3 4 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. 2 Assemble the parts of the Stand Body with the Cover Base of the TV. Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV. Stand Body Cover Base STAND INSTALLATION (LCD TV Models: 32/37/42LG20**, 26/32/37/42LG30**, 32/42LG32**, 32/37/42LG5***) A When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. (Only 19/22LG30**) Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the STAND BODY with COVER BASE of the TV. Insert the STAND BODY into a COVER BASE until clicking sound. Assemble the TV as shown. 1 2 3 Stand Body Cover Base Downloaded from www.Manualslib.com manuals search engine 8 ENGLISH PREPARATION STAND INSTALLATION (Only 19/22LS4D*) ■ Image shown may differ from your TV. 1 2 3 4 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Hold the Hinge Body and bend it upward. Hinge Body Insert the Stand Body into the TV until clicking sound. Assemble the parts of the Stand Body with the Cover Base of the TV. Cover Base Stand Body DETACHING STAND (Only 19/22LS4D*) 1 2 3 Place the tv with its front facing downward on a cushion or soft cloth. Pull the Cover Base backward during pressing a button on the Stand Body. Hold the Cover Base and pull with shake it backward to separate from the Stand Body. 4 Hold the Stand Body and bend it upward. 5 Pull stand body to separate from the TV during pressing 2 latches. Downloaded from www.Manualslib.com manuals search engine 9 ENGLISH BACK COVER FOR WIRE ARRANGEMENT LCD TV Models: 32/37/42LG20**, 26/32/37/ 42LG30**, 32/42LG32**, 32/37/42/47/52LG5*** Connect the cables as neces- sary. To connect additional equip- ment, see the External Equipment Setup section of the manual. 1 Open the CABLE MANAGEMENT CLIP as shown and manage the cables. 2 CABLE MANAGEMENT CLIP Fit the CABLE MANAGEMENT CLIP as shown. 3 Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section. 1 Install the CABLE MANAGEMENT CLIP as shown. (Only 19/22LS4D*) (Only 19/22LG30**) 2 First, press the cable management. Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward. NOTE ! G Do not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged. How to remove the cable management clip LCD TV Models : 19/22LS4D*, 19/22LG30** (Only 19/22LS4D*) Hold the CABLE MANAGEMENT CLIP with both hands and pull it backward. (Only 19/22LG30**) Downloaded from www.Manualslib.com manuals search engine 10 ENGLISH PREPARATION PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER. ■ You should purchase necessary components to fix the TV to the wall on the market. ■ Position the TV close to the wall to avoid the possibility of it falling when pushed. ■ The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV. NOTE ! G When moving the TV undo the cords first. G Use a platform or cabinet strong and large enough to support the size and weight of the TV. G To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same. 3 1 2 Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen these bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall. 3 Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the TV. 2 1 2 1 EARTHING Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes. Power Supply Circuit breaker ■ The TV can be installed in various ways such as on a wall, or on a desktop etc. ■ The TV is designed to be mounted horizontally. Downloaded from www.Manualslib.com manuals search engine 11 ENGLISH DESKTOP PEDESTAL INSTALLATION R For adequate ventilation allow a clearance of 4” (10cm) all around the TV. 4 inches 4 inches 4 inches 4 inches WALL MOUNT: HORIZONTAL INSTALLATION For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall. 4 inches 4 inches 4 inches 4 inches 4 inches Attaching the TV to a desk(Only 32/37/42LG20**, 26/32/37/42LG30**, 32/42LG32**, 32/37/42LG5***) WARNING ! G To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury. The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. 1-Screw (provided as parts of the product) Desk Stand When installing the wall-mounted unit, use the protection cover for desk-type stand installation. Insert the PROTECTION COVER into the TV until clicking sound. Not using the desk-type stand (Except for 19/22LS4D*) ■ Image shown may differ from your TV. Downloaded from www.Manualslib.com manuals search engine 12 PREPARATION ENGLISH AV 1 AV 2 ANTENNA IN ■ For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied. ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna) Outdoor Antenna (VHF, UHF) Wall Antenna Socket RF Coaxial Wire (75 ohm) ANTENNA CONNECTION Antenna UHF Signal Amplifier VHF ■ In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above. ■ If signal needs to be split for two TVs,use an antenna signal splitter for connection. AV IN 3 L/MONO R AUDIO VIDEO S-VIDEO HDMI IN 1 2 VARIABLE AUDIO OUT RGB IN COMPONENT IN AUDIO VIDEO AV 1 AV 2 ANTENNA IN AV 1 AV 2 ANTENNA IN Downloaded from www.Manualslib.com manuals search engine 13 WATCHING TV /PROGRAMME CONTROL ENGLISH REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. Installing Batteries ■ Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). ■ Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones. ■ Close cover. 1 2 3 4 5 6 7 8 9 10 OK MENU AV MODE GUIDE 1 2 3 4 5 6 7 8 9 0 Q.VIEW LIST TV INPUT D/A POWER VOL PR I/II MUTE TEXT RETURN EXIT FAV INFO i TV/RADIO * 3 4 5 6 7 10 9 MODE Selects the remote operating modes. Q. MENU Select the desired quick menu source. MENU Selects a menu. Clears all on-screen displays and returns to TV view- ing from any menu. VOLUME UP /DOWN Adjusts the volume. POWER Switches the TV on from standby or off to standby. INPUT External input mode rotate in regular sequence. Switches the TV on from standby. GUIDE Shows programme schedule. THUMBSTICK(Up/Down/LeftRight) Allows you to navigate the on-screen menus and adjust the system settings to your preference. OK Accepts your selection or displays the current mode. Programme UP/DOWN Selects a programme. Q.VIEW Returns to the previously viewed programme. 1 2 3 4 5 6 7 8 9 10 8 or Downloaded from www.Manualslib.com manuals search engine 14 WATCHING TV /PROGRAMME CONTROL ENGLISH Select your country. 2 OK TURNING ON THE TV Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the r / I, INPUT or P (or PR D E) button on the TV or press the POWER, INPUT, D/A, P (or PR + -) or NUMBER button on the remote control and the TV will switch on. 2 1 - When your TV is turned on, you will be able to use its features. ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION The installation guide menu appears on the TV screen when it is switched on for the first time. * If you want to change Language/ Country selection NOTE ! G If you do not finish the set-up Installation Guide by pressing RETURN or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on G If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. G The CI (Common Interface) function may not be applied based on country broadcasting circumstances. G DTV mode control buttons may not function based on country broadcasting circumstances. G In country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending on digital broadcasting circumstances. G The Country Setting “UK” should only be activated UK. Select your desired language. 1 OK Select OPTION. Select Menu Language or Country. 1 2 MENU OK 3 Select your desired language or country. 4 Save it. OK OK Initializing setup Note: a. It will automatically disappear after approx. 40 seconds unless a button is pressed. b. Press the BACK or RETURN button to change the current OSD to the previous OSD. c. For those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. d. "Home” mode is the optimal setting for home environments, and is the TV's default mode. e. "In Store" mode is the optimal setting for store environments.“ If a user modifies image quality data, “In Store” mode initializes the product to the image quality set by us after a certain period of time. f. The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu. If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Select Mode, Country, Time Zone, Auto programme tuning. Downloaded from www.Manualslib.com manuals search engine 15 ENGLISH ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. SETUP AUDIO TIME OPTION LOCK PICTURE Auto tuning Manual tuning Programme Edit Booster : On Software Update : Off Diagnostics CI Information SETUP Move OK Aspect Ratio : 16:9 Picture Mode : Vivid • Backlight 100 • Contrast 100 • Brightness 50 • Sharpness 70 • Colour 70 • Tint 0 PICTURE Move OK E Auto Volume : Off Balance 0 Sound Mode : Standard • 120Hz 0 • 200Hz 0 • 500Hz 0 • 1.2KHz 0 • 3KHz 0 AUDIO Move OK E Clock Off Time : Off On Time : Off Sleep Timer : Off Auto Sleep : Off Time Zone : Canary GMT TIME Move OK Lock System : Off Set Password Block Programme Parental Guidance : Off LOCK Move OK Menu Language : English Audio Language : English Subtitle Language : English Hard of Hearing( ) Off Country :UK Input Label SIMPLINK : Off Key Lock : Off OPTION Move OK E 1 Display each menu. 2 Select a menu item. 3 Move to the pop up menu. L R - + - + - + - + - + R G MENU OK OK • Press the MENU button to return to normal TV viewing. • Press the RETURN button to move to the previous menu screen. Downloaded from www.Manualslib.com manuals search engine 16 WATCHING TV /PROGRAMME CONTROL ENGLISH Use this to automatically find and store all available programmes. When you start auto programming in digital mode, all previously stored service information will be deleted. AUTO PROGRAMME TUNING • Use NUMBER buttons to input a 4-digit password in Lock System ‘On’. • If you wish to keep on auto tuning select YES using the button. Then, press the OK button. Otherwise select NO. Select SETUP. 2 Select Auto Tuning. 3 Select Yes. 4 Run Auto tuning. SETUP Move OK Auto tuning Manual tuning Programme Edit Booster : On Software Update : Off Diagnostics CI Information Auto tuning SETUP Move OK Auto tuning Manual tuning Programme Edit Booster : On Software Update : Off Diagnostics CI Information Auto tuning All service-information will be updated. Continue? SECAM L Search Yes No 1MENU OK OK OK • Press the MENU button to return to normal TV viewing. • Press the RETURN button to move to the previous menu screen. Downloaded from www.Manualslib.com manuals search engine 17 APPENDIX ENGLISH TO VIEW THE USER'S GUIDE ON THE CD-ROM To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. The "ACRORD" folder on the CD-ROM contains the installation program for Acrobat Reader. If you want to install Acrobat Reader, Open "My Computer" Open the folder "LG" Open the folder "ACRORD" double-click your language. To view the User's guide The User's guide files are included in the supplied CD-ROM. Load the supplied CD-ROM into the CD-ROM drive of your PC. After a while, the web page of the CD-ROM will open automatically.(Windows users only) If the web page does not appear automatically, open the User's guide file directly. Open "My computer" Open the folder "LG" Double click the "index.htm" file. MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on. Cleaning the Cabinet ATo remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. ADo not to use a wet cloth. Extended Absence G If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to protect against possible damage from lightning or power surges. CAUTION 2 1 TROUBLESHOOTING The TV does not operate properly. The remote control does not work Power is suddenly turned off A Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: TV, VCR etc. A Install new batteries. A Is the sleep timer set? A Check the power control settings. Has the Power supply been interrupted. A Is Auto sleep activated on this station? Downloaded from www.Manualslib.com manuals search engine 18 ENGLISH APPENDIX No picture &No sound No or poor colour or poor picture Poor reception on some channels Lines or streaks in pictures No picture when connecting HDMI Horizontal/vertical bars or picture shaking Picture appears slowly after switching on A Check whether the TV is switched on. A Try another channel. The problem may be with the broadcast. A Is the power cord inserted correctly into the mains? A Check your antenna direction and/or location. A Test the mains outlet by plugging another TV into the same outlet. A This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes. A Adjust Colour in menu option. A Allow a sufficient distance between the TV and the VCR. A Try another channel. The problem may be with the broadcast. A Are the video cables installed properly? A Activate any function to restore the brightness of the picture. A Check for local interference such as an electrical appliance or power tool. A Station or cable channel experiencing problems, tune to another station. A Station signal is weak, reposition the antenna to receive weaker stations. A Check for sources of possible interference. A Check antenna (Change the position of the antenna). A Check HDMI cable over version 1.3. If the HDMI cables don’t support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3. The video function does not work. The audio function does not work. A Press the VOLUME button. A Sound muted? Press MUTE button. A Try another channel. The problem may be with the broadcast. A Are the audio cables installed properly? A Adjust Balance in menu option. A A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV. A Check HDMI cable over version 1.3. A Check USB cable over version 2.0. Picture OK & No sound Unusual sound from inside the TV No sound when connecting HDMI or USB No output from one of the speakers *This feature is not available for all models. Downloaded from www.Manualslib.com manuals search engine 19 ENGLISH WEIGHT ■ The specifications shown above may be changed without prior notice for quality improvement. MODELS Weight with stand without stand 5.1 kg / 11.3 lbs 4.6 kg / 10.2 lbs 6.1 kg / 13.5 lbs 5.7 kg / 12.6 lbs 5.02 kg / 11.1 lbs 4.76 kg / 10.5 lbs 19LS4D* 19LS4D-ZD 22LS4D* 22LS4D-ZD 19LG30** 19LG3000-ZA 19LG3050-ZA 19LG3060-ZB MODELS 22LG30** 22LG3000-ZA 22LG3050-ZA 22LG3060-ZB 26LG30** 26LG3000-ZA 26LG3050-ZA 32LG30** 32LG3000-ZA 32LG3030-ZA Weight with stand without stand 5.6 kg / 12.4 lbs 5.34 kg / 11.8 lbs 10.1 kg / 22.3 lbs 8.6 kg / 19.0 lbs 13.4 kg / 29.6 lbs 11.9 kg / 26.3 lbs MODELS 42LG20** 42LG2000-ZA 32LG32** 32LG3200-ZA 32LG5*** 32LG5000-ZA 32LG5010-ZD 32LG5020-ZB 32LG5030-ZE 32LG5600-ZB 32LG5700-ZF Weight with stand without stand 23.6 kg / 52.1 lbs 21.0 kg / 46.3 lbs 13.4 kg / 29.6 lbs 11.9 kg / 26.3 lbs 14.1 kg / 31.1 lbs 12.6 kg / 27.8 lbs MODELS 37LG30** 37LG3000-ZA 37LG3030-ZA 42LG30** 42LG3000-ZA 42LG3030-ZA 32LG20** 32LG2000-ZA Weight with stand without stand 18.8 kg / 41.5 lbs 16.2 kg / 35.7 lbs 23.6 kg / 52.1 lbs 21.0 kg / 46.3 lbs 13.4 kg / 29.6 lbs 11.9 kg / 26.3 lbs 37LG20** 37LG2000-ZA 18.8 kg / 41.5 lbs 16.2 kg / 35.7 lbs 42LG32** 42LG3200-ZA 23.6 kg / 52.1 lbs 21.0 kg / 46.3 lbs MODELS 37LG50** 37LG5000-ZA 37LG5010-ZD 37LG5020-ZB 37LG5030-ZE 42LG50** 42LG5000-ZA 42LG5010-ZD 42LG5020-ZB 42LG5030-ZE 52LG50** 52LG5000-ZA 52LG5010-ZD 52LG5020-ZB 52LG5030-ZE 47LG50** 47LG5000-ZA 47LG5010-ZD 47LG5020-ZB 47LG5030-ZE Weight with stand without stand 18.3 kg / 40.4 lbs 15.6 kg / 34.4 lbs 26.2 kg / 57.8 lbs 23.5 kg / 51.8 lbs 39.5 kg / 87.1 lbs 34.9 kg / 77.0 lbs 29.2 kg / 64.4 lbs 24.6 kg / 54.3 lbs There is a problem with PICTURE settings. A It means that the TV is currently set to In Store mode. To switch to Home mode you should do the followings: From the TV Menu, choose OPTION -> Factory Reset -> Yes (wait for a few seconds for the TV to download again) -> OSD "WELCOME" appears -> Press OK button -> Choose Language -> Choose Home -> Select your Country and Time Zone -> Press OK button. Program search will begin automatically (You can stop the search by pressing the OK button). Now, you have completed switching to the Home mode. When the user changes the picture settings, the TV automatically converts back to the initial settings after a certain period of time. Downloaded from www.Manualslib.com manuals search engine (UK only) Downloaded from www.Manualslib.com manuals search engine