197E3L www.philips.com/welcome EN User manual 1 Customer care and warranty 29 Troubleshooting & FAQs 34 Table of Contents 1. Important ......................................................... 1 1.1 Safety precautions and maintenance ...............1 1.2 Notational Descriptions .........................................2 1.3 Disposal of product and packing material....3 2. Setting up the monitor .................................. 4 2.1 Installation .......................................................................4 2.2 Operating the monitor ...........................................5 2.3 Remove Base Stand and Base .............................7 3. Image Optimization........................................ 9 3.1 SmartImage Lite ..........................................................9 3.2 SmartContrast .............................................................10 3.3 Philips SmartControl Lite ......................................11 4. Technical Specifications ................................. 18 4.1 Resolution & Preset Modes..................................21 5. Power Management ....................................... 22 5.1 Automatic PowerSaving ..........................................22 6. Regulatory Information ................................. 23 7. Customer care and warranty ...................... 29 7.1 Philips' Flat Panel Monitors Pixel Defect Policy ..................................................................................29 7.2 Customer Care & Warranty ................................31 8. Troubleshooting & FAQs .............................. 34 8.1 Troubleshooting ..........................................................34 8.2 SmartControl Lite FAQs ........................................36 8.3 General FAQs ..............................................................37 1 1. Important This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor. The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer’s name and model and production number of the product. 1.1 Safety precautions and maintenance Warnings Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards. Read and follow these instructions when connecting and using your computer monitor. Operation Please keep the monitor out of direct sunlight, • very strong bright lights and away from any other heat source. Lengthy exposure to this type of environment may result in discoloration and damage to the monitor. Remove any object that could fall into • ventilation holes or prevent proper cooling of the monitor’s electronics. Do not block the ventilation holes on the • cabinet. When positioning the monitor, make sure the • power plug and outlet are easily accessible. If turning off the monitor by detaching the • power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation. Please use approved power cord provided • by Philips all the time. If your power cord is 1. Important missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center) Do not subject the monitor to severe • vibration or high impact conditions during operation. Do not knock or drop the monitor during • operation or transportation. Maintenance • To protect your monitor from possible damage, do not put excessive pressure on the monitor panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the monitor panel. Unplug the monitor if you are not going to • use it for an extensive period of time. Unplug the monitor if you need to clean it • with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor. To avoid the risk of shock or permanent • damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment. If your monitor gets wet, wipe it with dry cloth • as soon as possible. If foreign substance or water gets in your • monitor, please turn the power off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center. Do not store or use the monitor in locations • exposed to heat, direct sunlight or extreme cold. In order to maintain the best performance of • your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges. o Temperature: 0-40°C 32-95°F o Humidity: 20-80% RH 2 1. Important IMPORTANT: Always activate a moving screen • saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen. "Burn-in", "after-imaging", or "ghost imaging" • is a well-known phenomenon in monitor panel technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off. Warning Severe” burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. Service The casing cover should be opened only by • qualified service personnel. If there is any need for any document for • repair or integration, please contact with your local service center. (please refer to the chapter of "Consumer Information Center") For transportation information, please refer to • "Technical Specifications". Do not leave your monitor in a car/trunk • under direct sun light. Note Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed. 1.2 Notational Descriptions The following subsections describe notational conventions used in this document. Notes, Cautions and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows: Note This icon indicates important information and tips that help you make better use of your computer system. Caution This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data. Warning This icon indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority. 3 1. Important 1.3 Disposal of product and packing material Waste Electrical and Electronic Equipment- WEEE This marking on the product or on its packaging illustrates that, under European Directive 2002/96/ EC governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection. To determine the locations for dropping off such waste electrical and electronic, contact your local government office, the waste disposal organization that serves your household or the store at which you purchased the product. Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of. All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into mono materials. Please find out about the local regulations on how to dispose of your old monitor and packing from your sales representative. Recycling Information for Customers Your display is manufactured with high quality materials and components which can be recycled and reused. To learn more about our recycling program please visit www.philips.com/about/sustainability/recycling. 4 2. Setting up the monitor VGA (optional) DVI (optional) Register your product and get support at www.philips.com/welcome 197E3L Quick Start Install base stand 1. Place the monitor face down on soft and smooth surface taking care to avoid scratching or damaging the screen. 2. Hold the monitor base stand with both hands and firmly insert the base stand into the base column. (1) Gently attach the base to the base column until the latch locks the base. (2) Use your fingers to tighten the screw located at the bottom of the base, and secure the base to the column tightly. 1 2 2. Setting up the monitor 2.1 Installation Package contents 5 2. Setting up the monitor Connecting to your PC AC power input VGA input DVI-D input Kensington anti-theft lock Connect to PC 1. Connect the power cord to the back of the monitor firmly. 2. Turn off your computer and unplug its power cable. 3. Connect the monitor signal cable to the video connector on the back of your computer. 4. Plug the power cord of your computer and your monitor into a nearby outlet. 5. Turn on your computer and monitor. If the monitor displays an image, installation is complete. 2.2 Operating the monitor Front view product description 197E3L 197E3L (for 1A model) Switch monitor’s power on and off. Access the OSD menu. Return to previous OSD level. Change display format. Adjust the brightness level. Adjust the OSD menu. Change the signal input source. Change display format. SmartImage Lite. There are three modes to be selected: Standard, Internet and Game. 4 5 6 2 3 4 7 5 6 2 3 4 7 6 2. Setting up the monitor Description of the On Screen Display What is On-Screen Display (OSD)? On-Screen Display (OSD) is a feature in all Philips monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below: 197E3L Color Picture Language OSD Settings Input DVI 197E3L (for 1A model) Language Color OSD Settings Setup Picture Brightness Contrast SmartContrast Picture Format Wide screen Off 100 50 Basic and simple instruction on the control keys In the OSD shown above users can press buttons at the front bezel of the monitor to move the cursor, OK to confirm the choice or change. The OSD Menu Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on. Main menu Sub menu VGA DVI (available for selective models) Picture Wide Screen, 4:3 0~100 0~100 Picture Format Brightness Contrast On, Off SmartContrast OSD Settings 0~100 0~100 Off, 1, 2, 3, 4 5 s, 10 s, 20 s, 30 s, 60 s Horizontal Vertical Transparency OSD Time out Setup 0~100 On, Off Yes, No 0~100 0~100 0~100 H. Position Auto V. Position Phase Clock Resolution Notification Reset Information Language English Español, Français, Deutsch, Italiano, Português, Русский ����� Türkçe� Color 6500K, 9300K Red: 0~100 Green: 0~100 Blue: 0~100 Color Temperature sRGB User Define Input 7 2. Setting up the monitor Resolution notification This monitor is designed for optimal performance at its native resolution, 1366×768@60Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1366×768@60Hz for best results. Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu. Physical Function Tilt 2.3 Remove Base Stand and Base Remove the Base Stand Before you start disassembling the monitor base, please follow the instructions below to avoid damage or injury. 1. Place the monitor face down on a smooth surface, taking care to avoid scratching or damaging the screen. 2. Detach the base stand away from the base column by: (1) Use your fingers to loosen the screw located at the bottom of the base (2) Gently move up-and-down to release the latch that locks the base and pull the base away from the base column. 2 1 8 2. Setting up the monitor Remove the base 1. You may use a flathead screwdriver to stick into two release holes on the hinge cover, and gently pry the hinge cover to have it removed. 2. Remove the 4 screws and then remove the base from the monitor. 9 3. Image Optimization How to enable SmartImage Lite? 1. Press to launch the SmartImage Lite on screen display; 2. Keep pressing to toggle between Standard, Internet, Game. 3. The SmartImage Lite on screen display will remain on screen for 5 seconds or you can also press”OK” to make confirmation. 4. When SmartImage Lite is enabled, the sRGB scheme is disabled automatically. To use sRGB you need to disable SmartImage Lite with the button at the front bezel of your monitor. Except using key to scroll down, you can also press buttons to choose and press “OK” to confirm selection and close the SmartImage Lite OSD. 3. Image Optimization 3.1 SmartImage Lite What is it? SmartImage Lite provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you're working with text applications, displaying images or watching a video, Philips SmartImage Lite delivers great optimized monitor performance. Why do I need it? You want a monitor that delivers optimized display all your favorite types of content, SmartImage Lite software dynamically adjust brightness, contrast, color and sharpness in real time to enhance your monitor viewing experience. How does it work? SmartImage Lite is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. Based on a scenario you select, SmartImage Lite dynamically enhances the contrast, color saturation and sharpness of images to enhance the contents being displayed - all in real time with the press of a single button. 10 3. Image Optimization 3.2 SmartContrast What is it? Unique technology that dynamically analyzes displayed content and automatically optimizes a monitor's contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds. Why do I need it? You want the very best visual clarity and viewing comfort for every type of content. SmartContrast dynamically controls contrast and adjusts backlighting for clear, crisp, bright gaming and video images or displays clear, readable text for office work. By reducing your monitor's power consumption, you save on energy costs and extend the lifetime of your monitor. How does it work? When you activate SmartContrast, it will analyse the content you are displaying in real time to adjust colors and control backlight intensity. This function will dynamically enhance contrast for a great entertainment experience when viewing videos or playing games. There are three modes to be selected: Standard, Internet, Game. • Standard: Enhances text and dampens brightness to increase readability and reduce eye strain. This mode significantly enhances readability and productivity when you're working with spreadsheets, PDF files, scanned articles or other general office applications. • Internet: This profile combines color saturation, dynamic contrast and sharpness enhancement to display photos and other images with outstanding clarity in vibrant colors - all without artifacts and faded colors. • Game: Turn on over drive circuit for best response time, reduce jaggy edges for fast moving objects on screen, enhance contrast ratio for bright and dark scheme, this profile delivers the best gaming experience for gamers. 11 3. Image Optimization 3.3 Philips SmartControl Lite The new SmartControl Lite software by Phillips allows you to control your monitor via an easy to use on-screen graphic interface. Complicated adjustments are a thing of the past as this user friendly software guides you through fine- tuning resolution, Color calibration, Clock/Phase adjustments, RGB White point adjustment, etc. Equipped with latest technology in core algorithm for fast processing and response, this Windows 7 compliant eye catching animated Icon based software is ready to enhance your experience with Philips monitors! Installation Follow the instruction and complete the • installation. You can launch after installation is completed. • If you want to launch later, you can either click • the shortcut on desktop or toolbar. First launch -Wizard The first time after installation of SmartControl • Lite, it will automatically go to Wizard for first time launch. The wizard will guide you through adjustment • your monitor performance step by step. You can go to Plug-in menu to launch wizard • later on as well. You can adjust more options without wizard • by Standard pane. 12 3. Image Optimization Start with Standard pane: Adjust menu: Adjust Menu allow you to adjust Brightness, • Contrast, Focus, Position and Resolution. You can follow the instruction and do the • adjustment. Cancel prompts user if you want to cancel • installation. 13 3. Image Optimization Color menu: Color Menu allow you to adjust RGB, Black • Level, White Point, Color Calibration, and SmartImage Lite (Please refer to SmartImage Lite section). You can follow the instruction and do the • adjustment. Refer to below table for sub-menu item base • on your input. Example for Color Calibration • 1. "Show Me" starts color calibration tutorial. 2. Start - starts the 6-step color calibration sequence. 3. Quick View loads the before/after images. 4. To return to Color home pane, click the Cancel button. 5. Enable color calibration - by default is on. If unchecked, does not allow for color calibration to happen, dimes out start and quick view buttons. 6. Must have patent info in calibration screen. 14 3. Image Optimization Displays current preference settings. • A checked box enables the feature. The check • box is a toggle. Enable Context Menu on desktop is checked • (On) by default. Enable Context menu displays SmartControl Lite selections for Select Preset and Tune Display in the desktop right-click context menu. Disabled removes SmartControl Lite from the right click context menu. Enable Task Tray icon is checked (On) by • default. Enable context menu shows the task tray menu for SmartControl Lite. A right click on the task tray icon displays the menu options for Help, Technical Support, Check for Upgrade, About, and Exit. When Enable task tray menu is disabled, the task tray icon will only display EXIT. Run at Startup is checked (On) by default. • When disabled, SmartControl Lite will not launch at start or be in the task tray. The only way to launch SmartControl Lite is either from the desktop short cut or from the program file. Any preset set to run at startup will not load when this box is unchecked (Disabled). Enable transparency mode (Windows 7, Vista, • XP). Default is 0% Opaque. First color Calibration Screen: Previous button is disabled until the second • color screen. Next goes to the succeeding target (6-targets). • Final next goes File>Presets pane. • Cancel closes the UI and returns to the plug • in page. SmartImage Lite Allows user to change setting for better display setting based on content. When Entertainment is set, SmartContrast and SmartResponse are enabled. Options>Preferences - Will only be active when selecting Preferences from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. 15 3. Image Optimization Options>Input - Will only be active when selecting Input from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. All other SmartControl Lite tabs are not available. Display the Source instruction pane and • current input source setting. On single input displays, this pane will not be • visible. Options>Audio - Will only be active when selecting Audio from the drop-down Options menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. 16 3. Image Optimization Help>User Manual - Will only be active when selecting User Manual from the drop-down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Help>Version - Will only be active when selecting Version from the drop- down Help menu. On a non-supported display capable of DDC/CI, only the Help and Options tabs are available. Context Sensitive menu The Context Sensitive menu is Enabled by default. If Enable Context Menu has been checked in the Options>Preferences pane, then the menu will be visible. The Context Menu has four entries: SmartControl Lite - When selected the About • Screen is displayed. Select Preset - Provides a hierarchical menu • of saved presets for immediate use. A check mark shows the currently selected preset. Facoty Preset can also be called from the drop down menu. Tune Display - Opens the SmartControl Lite • control panel. SmartImage Lite - Check current settings, • Standard, Internet, Game. 17 3. Image Optimization Task Tray Menu Enabled The task tray menu can be displayed by right- clicking on the SmartControl Lite icon from the task tray. Left Click will launch the application. The task tray has five entries: Help - Access to User Manual file: Open User • Manual file using the default browser window. Technical Support - displays the tech support • page. Check for Update - takes the user to PDI • Landing and checks the user's version against the most current available. About - Displays detailed reference • information: product version, release information, and product name. Exit - Close SmartControl Lite. • To run SmartControl Lite again either select SmartControl Lite from Program menu, double- click the desktop PC icon or restart the system. Task Tray Menu Disabled When the Task Tray is disabled in the preference folder, only the EXIT selection is available. To completely remove SmartControl Lite from the task tray, disable Run at Startup in Options>Preferences. 18 4. Technical Specifi cations 4. Technical Specifications Picture/Display Monitor panel type TFT-LCD Backlight LED Panel size 18.5" ( 47.0 cm) Aspect ratio 16:9 Pixel Pitch 0.3 x 0.3 mm Brightness 250 cd/m² SmartContrast 20,000,000:1 Contrast ratio (typ.) 1000:1 Response time (typical) 5 ms Optimum Resolution 1366x768 @ 60Hz Viewing angle 170° (H) / 160° (V)@C/R>10 Picture Enhancement SmartImage Lite Display colors 16.7 M Vertical refresh rate 56Hz -76Hz Horizontal Frequency 31kHz - 83kHz sRGB YES Connectivity Signal input DVI-D (digital), VGA (Analog) Input Signal Separate Sync, Sync on Green Convenience User Convenience 197E3L: 197E3L (1A): OSD Languages English, French, German, Spanish, Italian, Russian, Simplified Chinese, Portuguese, Turkish Other convenience Kensington lock Plug & Play Compatibility DDC/CI, sRGB, Windows 7, Mac OSX, Linux Stand Tilt -5/+20 19 4. Technical Specifi cations Power On mode 12.91W (typ.), 13.59W(max.) Energy Consumption (EnergyStar 5.0 test method) AC Input Voltage at 100VAC +/-5VAC, 50Hz +/- 5Hz AC Input Voltage at 115VAC +/-5VAC, 50Hz +/- 5Hz AC Input Voltage at 230VAC +/-5VAC, 50Hz +/ -5Hz Normal Operation (typ.) 10.05W 9.96W 9.97W Sleep(Standby) 0.5W 0.5W 0.5W Off 0.5W 0.5W 0.5W Heat Dissipation* AC Input Voltage at 100VAC +/-5VAC, 50Hz +/ -5Hz AC Input Voltage at 115VAC +/-5VAC, 50Hz +/ -5Hz AC Input Voltage at 230VAC +/-5VAC, 50Hz +/ -5Hz Normal Operation 30.304 BTU/hr 34.008 BTU/hr 34.024 BTU/hr Sleep(Standby) 1.706 BTU/hr 1.706 BTU/hr 1.706 BTU/hr Off 1.706 BTU/hr 1.706 BTU/hr 1.706 BTU/hr Power LED indicator On mode: White, Standby/Sleep: White(Blinking) Power Supply Built-in, 100-240VAC, 50-60Hz Dimension Product with stand (WxHxD) 462 x 364 x 200 mm Product without stand (WxHxD) 462 x 295 x 41 mm Weight Product with stand 2.63kg Product without stand 2.194kg Product with packaging 3.724kg Operating Condition Temperature range (operation) 0°C to 40 °C Temperature range (Non- operation) -20°C to 60°C Relative humidity 20% to 80% Altitude operation: + 12,000 ft (3,658 m) Non-operation: + 40,000 ft (12,192 m) MTBF 30,000hrs Environmental ROHS YES EPEAT Silver. (www.epeat.net) Packaging 100% recyclable 20 4. Technical Specifi cations Compliance and standards Regulatory Approvals CE Mark, FCC Class B, GOAST, SEMKO, TCO Certified, UL/cUL, BSMI, ISO9241-307, Energy star 5.0 Cabinet Color Black (back) / Blue (front) Finish Glossy Note 1. EPEAT Gold or Silver is valid only where Philips registers the product Please visit www. epeat.net for registration status in your country. 2. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet. 21 4. Technical Specifi cations 4.1 Resolution & Preset Modes Maximum Resolution For 197E3L 1366 x 768 at 60 Hz (analog input) 1366 x 768 at 60 Hz (digital input) Recommended Resolution For 197E3L 1366 x 768 at 60 Hz (digital input) H. freq (kHz) Resolution V. freq (Hz) 31.47 720x400 70.09 31.47 640x480 59.94 37.50 640x480 75.00 37.88 800x600 60.32 46.88 800x600 75.00 48.36 1024x768 60.00 60.02 1024x768 75.03 63.89 1280x1024 60.02 79.98 1280x1024 75.03 47.71 1366x768 59.79 Note Please notice that your display works best at native resolution of 1366 X 768@60Hz. For best display quality,please follow this resolution recommendation. 22 5. Power Management 5. Power Management 5.1 Automatic PowerSaving If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: 197E3L Power Management Definition VESA Mode Video H-sync V-sync Power Used LED color Active ON Yes Yes < 12.91 W (typ.) White Sleep (Standby) OFF No No < 0.5 W White (blink) Switch Off OFF - - < 0.5 W OFF The following setup is used to measure power consumption on this monitor. Native resolution: 1366 x 768 Contrast: 50% Brightness: 250 nits Color temperature: 6500k with full white pattern Note This data is subject to change without notice. 23 6. Regulatory Information 6. Regulatory Information Lead-free Product Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Toxic substances like Lead has been eliminated and compliance with European community’s stringent RoHs directive mandating restrictions on hazardous substances in electrical and electronic equipment have been adhered to in order to make Philips monitors safe to use throughout its life cycle. Congratulations, Your display is designed for both you and the planet! The display you have just purchased carries the TCO Certified label. This ensures that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on the climate and our natural environment. TCO Certified is a third party verified program, where every product model is tested by an accredited impartial test laboratory. TCO Certified represents one of the toughest certifications for displays worldwide. Some of the Usability features of the TCO Certified for displays: Visual ergonomics for good image quality • is tested to ensure top performance and reduce sight and strain problems. Important parameters are luminance, contrast, resolution, black level, gamma curve, colour and luminance uniformity and colour rendering Products are tested according to rigorous safety • standards at impartial laboratories Electric and magnetic fields emissions as low as • normal household background levels Low acoustic noise emissions (when applicable) • Some of the Environmental features of the TCO Certified for displays: The brand owner demonstrates corporate • social responsibility and has a certified environmental management system (EMAS or ISO 14001) Very low energy consumption both in on- and • standby mode minimize climate impact Restrictions on chlorinated and brominated • flame retardants, plasticizers, plastics and heavy metals such as cadmium, mercury and lead (RoHS compliance) Both product and product packaging is prepared • for recycling The brand owner offers take-back options • The requirements can be downloaded from our web site. The requirements included in this label have been developed by TCO Development in co-operation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user- friendly direction. Our labeling system started with displays in 1992 and is now requested by users and ITmanufacturers all over the world. About 50% of all displays worldwide are TCO certified. For more information, please visit www.tcodevelopment.com For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces. 24 6. Regulatory Information Benefits of EPEAT Reduce use of primary materials Reduce use of toxic materials Avoid the disposal of hazardous waste EPEAT’S requirement that all registered products meet ENERGY STAR’s energy efficiency specifications, means that these products will consume less energy throughout their life. CE Declaration of Conformity This product is in conformity with the following standards EN60950-1:2006 (Safety requirement of • Information Technology Equipment) EN55022:2006 (Radio Disturbance • requirement of Information Technology Equipment) EN55024:1998+A1:2001+A2:2003 (Immunity • requirement of Information Technology Equipment) EN61000-3-2:2006 (Limits for Harmonic • Current Emission) EN61000-3-3:1995+A1:2001+A2:2005 • (Limitation of Voltage Fluctuation and Flicker) following provisions of directives applicable 2006/95/EC (Low Voltage Directive) • 2004/108/EC (EMC Directive) • Energy Star Declaration (www.energystar.gov) As an ENERGY STAR® Partner, we have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Note We recommend you switch off the monitor when it is not in use for a long time. EPEAT (www.epeat.net) 2005/32/EC (EuP Directive, EC No. 1275/2008 • mplementing Directive for Standby and Off mode power consumption) and is produced by a manufacturing organization on ISO9000 level. The product also comply with the following standards ISO9241-307:2008 (Ergonomic requirement, • Analysis and compliance test methods for electronic visual displays) GS EK1-2000:2009 (GS mark requirement) • prEN50279:1998 (Low Frequency Electric and • Magnetic fields for Visual Display) MPR-II (MPR:1990:8/1990:10 Low Frequency • Electric and Magnetic fields) TCO certified (Requirement for Environment • Labeling of Ergonomics, Energy, Ecology and Emission, TCO: Swedish Confederation of Professional Employees) for TCO versions “The EPEAT (Electronic Product Environmental Assessment Tool) program evaluates computer desktops, laptops, and monitors based on 51 environmental criteria developed through an extensive stakeholder consensus process supported by US EPA. EPEAT system helps purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunity for manufacturers to secure market recognition for efforts to reduce the environmental impact of its products.” 25 6. Regulatory Information Federal Communications Commission (FCC) Notice (U.S. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. • Increase the separation between the • equipment and receiver. Connect the equipment into an outlet on • a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ • TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-CAUSING EQUIPMENT REGULATIONS. FCC Declaration of Conformity Declaration of Conformity for Products Marked with FCC Logo, United States Only This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 26 6. Regulatory Information Commission Federale de la Communication (FCC Declaration) Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences qui, si l'appareil n'est pas installé et utilisé selon les consignes données, peuvent causer des interférences nuisibles aux communications radio. Cependant, rien ne peut garantir l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur pourrait essayer de corriger la situation en prenant les mesures suivantes: Réorienter ou déplacer l'antenne de réception. • Augmenter la distance entre l'équipement et • le récepteur. Brancher l'équipement sur un autre circuit que • celui utilisé par le récepteur. Demander l'aide du marchand ou d'un • technicien chevronné en radio/télévision. Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA. EN 55022 Compliance (Czech Republic Only) 27 6. Regulatory Information Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three- prong socket). All equipment that works together (computer, monitor, printer, and so on) should have the same power supply source. The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A). To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which should be located near the equipment and easily accessible. A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-93/T-42107 and PN-89/E-06251. BSMI Notice (Taiwan Only) North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: S Ø R G V E D P L AC E R I N G E N F O R , AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA. Plassering/Ventilasjon ADVARSEL: NÅR DETTE UTSTYRET PLASSERES, MÅ DU PASSE PÅ AT KONTAKTENE FOR STØMTILFØRSEL ER LETTE Å NÅ. 28 6. Regulatory Information Ergonomie Hinweis (nur Deutschland) Der von uns gelieferte Farbmonitor entspricht den in der "Verordnung über den Schutz vor Schäden durch Röntgenstrahlen" festgelegten Vorschriften. Auf der Rückwand des Gerätes befindet sich ein Aufkleber, der auf die Unbedenklichkeit der Inbetriebnahme hinweist, da die Vorschriften über die Bauart von Störstrahlern nach Anlage III ¤ 5 Abs. 4 der Röntgenverordnung erfüllt sind. Damit Ihr Monitor immer den in der Zulassung geforderten Werten entspricht, ist darauf zu achten, daß 1. Reparaturen nur durch Fachpersonal durchgeführt werden. 2. nur original-Ersatzteile verwendet werden. 3. bei Ersatz der Bildröhre nur eine bauartgleiche eingebaut wird. Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklem Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei zu geringem Zeichenkontrast wären die Folge). Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger. ACHTUNG: BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND. China RoHS The People's Republic of China released a regulation called "Management Methods for Controlling Pollution by Electronic Information Products" or commonly referred to as China RoHS. All products are produced and sold for China market have to meet China RoHS request. ������� ��������������������� ������������������� ��������������������� ������������������� ����������������� ����������������������� ��������������������������� ��������������������������� ��������������������������� ���� 29 7. Customer care and warranty 7. Customer care and warranty Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control. However, pixel or sub pixel defects on the TFT monitor panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type. In order to qualify for repair or replacement under warranty, the number of pixel defects on a TFT monitor panel must exceed these acceptable levels. For example, no more than 0.0004% of the sub pixels on a monitor may be defective. Furthermore, Philips sets even higher quality standards for certain types or combinations of pixel defects that are more noticeable than others. This policy is valid worldwide. Pixels and Sub pixels A pixel, or picture element, is composed of three sub pixels in the primary colors of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. Bright Dot Defects Bright dot defects appear as pixels or sub pixels that are always lit or 'on'. That is, a bright dot is a sub-pixel that stands out on the screen when the monitor displays a dark pattern. There are the types of bright dot defects: One lit red, green or blue sub pixel Two adjacent lit sub pixels: - Red + Blue = Purple - Red + Green = Yellow - Green + Blue = Cyan (Light Blue) Three adjacent lit sub pixels (one white pixel) 7.1 Philips' Flat Panel Monitors Pixel Defect Policy 30 7. Customer care and warranty Note A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots. Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern. These are the types of black dot defects. Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects. Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 3 2 adjacent lit subpixels 1 3 adjacent lit subpixels (one white pixel) 0 Distance between two bright dot defects* >15mm Total bright dot defects of all types 3 BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer 2 adjacent dark subpixels 2 or fewer 3 adjacent dark subpixels 0 Distance between two black dot defects* >15mm Total black dot defects of all types 5 or fewer TOTAL DOT DEFECTS ACCEPTABLE LEVEL Total bright or black dot defects of all types 5 or fewer Note 1 or 2 adjacent sub pixel defects = 1 dot defect This monitor is ISO9241-307 compliant. (ISO9241-307: Ergonomic requirement , analysis and compliance test methods for electronic visual displays) 31 7. Customer care and warranty 7.2 Customer Care & Warranty Customer Care & Warranty For warranty coverage information and additional support requirement valid for your region, please visit www.philips.com/support website for details. You may also contact your local Philips Customer Care Center number listed below. Contact Information for WESTERN EUROPE region: Country ASC Consumer care number Price Austria Siemens I&S +43 0810 000206 € 0.07 Belgium E Care +32 078 250851 € 0.06 Denmark A-novo +45 3525 8761 Local call tariff Finland A-novo +358 09 2290 1908 Local call tariff France A-novo +33 082161 1658 € 0.09 Germany Siemens I&S +49 01803 386 853 € 0.09 Greece Allman Hellas +30 00800 3122 1223 Free of charge Ireland Invec Scotland +353 01 601 1161 Local call tariff Italy A-novo +39 840 320 041 € 0.08 Luxembourg E Care +352 26 84 30 00 Local call tariff Netherlands E Care +31 0900 0400 063 € 0.10 Norway A-novo +47 2270 8250 Local call tariff Poland Zolter +48 0223491505 Local call tariff Portugal Eatsa Spain +351 2 1359 1440 Local call tariff Switzerland A-novo +41 02 2310 2116 Local call tariff Spain Eatsa Spain +34 902 888 785 € 0.10 Sweden A-novo +46 08 632 0016 Local call tariff United Kingdom Invec Scotland +44 0207 949 0069 Local call tariff 32 7. Customer care and warranty Contact Information for CENTRAL AND EASTERN EUROPE region: Country Call center ASC Consumer care number Belarus NA IBA +375 17 217 3386 Bulgaria NA LAN Service +359 2 960 2360 Croatia NA Renoprom +385 1 333 0974 Czech Rep. NA Asupport 800 100 697 Estonia NA FUJITSU +372 6519900 Hungary NA Serware +36 1 2426331 NA Profi Service +36 1 814 8080 Latvia NA “ServiceNet LV” Ltd. +371 7460399 Lithuania NA UAB "Servicenet" +370 7400088 Romania NA Blue Ridge Intl. +40 21 2101969 Russia NA CPS +7 (495) 645 6746 (for repair) NA CEEE Partners +7 (495) 645 3010 (for sales) Serbia & Montenegro NA Kim Tec d.o.o. +381 11 20 70 684 Slovakia NA Datalan Service +421 2 49207155 Slovenia NA PC H.and +386 1 530 08 24 Ukraine NA Comel +380 562320045 NA Topaz-Service Company +38 044 245 73 31 Turkey NA Techpro +90 212 444 4 832 Contact Information for LATIN AMERICA region: Country Call center Consumer care number Argentina Vermont 0800 3330 856 Brazil Vermont 0800-7254101 Contact Information for NORTH AMERICA: Country Call center ASC Consumer care number Canada Supercom Supercom (800)479-6696 U.S.A. TOS Teleplan (877) 835-1838 Contact Information for CHINA: China Consumer care number : 4008 800 008 33 7. Customer care and warranty Contact Information for APMEA region: Country Call center ASC Consumer care number Australia NA AGOS NETWORK PTY LTD 1300 360 386 Bangladesh NA Distributor: Computer Source Ltd (warranty buy-out) 880-2-9141747, 9127592 880-2-8128848 / 52 Cambodia NA Distributor: Neat Technology Pte Ltd (Singapore) (warranty buy-out) 855-023-999992 Hong Kong / Macau NA Smart Pixels Technology Ltd. Hong Kong:Tel: +852 2619 9639 Macau:Tel: (853)-0800-987 India NA REDINGTON INDIA LTD Tel: 1 800 425 6396 SMS: PHILIPS to 56677 Indonesia NA PT. Gadingsari elektronika Prima Tel: 62 21 75909053, 75909056, 7511530 Israel NA Eastronics LTD 1-800-567000 Malaysia NA After Market Solutions (CE) Sdn Bhd 603 7953 3370 Nepal NA Distributor: Syakar Co. Ltd (warranty buy-out) 977-1-4222395 New Zealand NA Visual Group Ltd. 0800 657447 Pakistan NA Philips Consumer Service (9221) 2737411-16 Philippines NA Glee Electronics, Inc. (02) 633-4533 to 34, (02) 637-6559 to 60 Singapore NA Philips Electronics Singapore Pte Ltd (Philips Consumer Care Center) (65) 6882 3999 South Africa NA Sylvara Technologies Pty Ltd 086 0000 888 South Korea NA PCS One Korea Ltd. 080-600-6600 Sri Lanka NA no distributor and/or service provider currently Taiwan PCCW Teleservices Taiwan FETEC.CO 0800-231-099 Thailand NA Axis Computer System Co., Ltd. (662) 934-5498 United Arab Emirates NA AL SHAHD COMPUTER L.L.C 00971 4 2276525 Vietnam NA FPT Service Informatic Company Ltd. +84 8 38248007 Ho Chi Minh City +84 5113.562666 Danang City +84 5113.562666 Can tho Province 34 8. Troubleshooting & FAQs 8.1 Troubleshooting This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative. Common Problems No Picture (Power LED not lit) Make sure the power cord is plugged into the • power outlet and into the back of the monitor. First, ensure that the power button on the • front of the monitor is in the OFF position, then press it to the ON position. No Picture (Power LED is white blinking) Make sure the computer is turned on. • Make sure the signal cable is properly • connected to your computer. make sure the monitor cable has no bent pins • on the connect side. If yes, repair or replace the cable. The Energy Saving feature may be activated • Screen says Make sure the monitor cable is properly • connected to your computer. (Also refer to the Quick Start Guide). Check to see if the monitor cable has bent • pins. Make sure the computer is turned on. • AUTO button doesn't function The auto function is applicable only in VGA- • Analog mode. If the result is not satisfactory, you can do manual adjustments via the OSD menu. Note The Auto Function is not applicable in DVI-Digital mode as it is not necessary. Visible signs of smoke or sparks Do not perform any troubleshooting steps • Disconnect the monitor from mains power • source immediately for safety Contact with Philips customer service • representative immediately. Imaging Problems Image is not centered Adjust the image position using the “Auto” • function in OSD Main Controls. Adjust the image position using the Phase/ • Clock of Setup in OSD Main Controls. It is valid only in VGA mode. Image vibrates on the screen Check that the signal cable is properly securely • connected to the graphics board or PC. Vertical flicker appears Adjust the image using the “Auto” function in • OSD Main Controls. Eliminate the vertical bars using the Phase/ • Clock of Setup in OSD Main Controls. It is valid only in VGA mode. 8. Troubleshooting & FAQs 35 8. Troubleshooting & FAQs Horizontal flicker appears Adjust the image using the “Auto” function in • OSD Main Controls. Eliminate the vertical bars using the Phase/ • Clock of Setup in OSD Main Controls. It is valid only in VGA mode. Image appears blurred, indistinct or too dark Adjust the contrast and brightness on • On-Screen Display. An "after-image", "burn-in" or "ghost image" remains after the power has been turned off. Uninterrupted display of still or static images • over an extended period may cause " burn in", also known as "after-imaging " or "ghost imaging", on your screen. "Burn-in", "after- imaging", or "ghost imaging" is a well-known phenomenon in monitor panel technology. In most cases, the "burned in" or "after-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver • program when you leave your monitor unattended. Always activate a periodic screen refresh • application if your monitor will display unchanging static content. Severe” burn-in” or “after-image” or “ghost • image” symptoms will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. Image appears distorted. Text is fuzzy or blurred. Set the PC’s display resolution to the same • mode as monitor’s recommended screen native resolution. Green, red, blue, dark, and white dots appears on the screen The remaining dots are normal characteristic • of the liquid crystal used in today’s technology, Please refer the pixel policy for more detail. The "power on" light is too strong and is disturbing You can adjust “power on” light using the • power LED Setup in OSD main Controls. For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative. 36 8. Troubleshooting & FAQs 8.2 SmartControl Lite FAQs Q1. I change the monitor on a PC to a different one and the SmartControl Lite becomes un-usable, what do I do? Ans.: Restart your PC and see if SmartControl Lite can work. Otherwise, you will need to remove and re-install SmartControl Lite to ensure proper driver is installed. Q2. The SmartControl Lite functions worked well before, but it does not work anymore, what can I do? Ans.: If the following actions were executed, the monitor driver may need to be re-installed. Changed video graphic adapter to another • one Updated video driver • Activities on OS, such as service pack or patch • Run Windows Update and updated monitor • and/or video driver Windows was booted with the monitor • power off or disconnected.To find out, please right click My Computer and click on Properties->Hardware-> Device Manager. If you see "Plug and Play Monitor" shows under Monitor, then you need to re-install. Simply remove SmartControl Lite and re-install it. Q3. After installing SmartControl Lite, when clicking on SmartControl Lite tab, nothing shows up after a while or a failure message shows, what happened? Ans.: It might be your graphic adaptor is not compatible with the SmartControl Lite. If your graphic adaptor is one of the above mentioned brands, try to download the most updated graphic adaptor driver from corresponding companies’ web site. Install the driver. Remove SmartControl Lite and re-install it once more. If it is still not working, we are sorry that the graphic adaptor is not supported. Please visit Philips website and check if an updated SmartControl Lite driver is available. Q4. When I click on Product Information, only partial information is shown, what happened? Ans.: It might be your graphic card adaptor driver is not the most updated version which fully supporting DDC/CI interface. Please try to download the most updated graphic adaptor driver from corresponding companies’ web site. Install the driver. Remove SmartControl Lite and re-install it once more. Q5. I forgot my PIN for Theft Deterrence Function. What can I do? Ans.: Philips Service center has a right to ask for legitimate identification and authorization, in order to establish ownership of the monitor. Please note that the anti-theft deterrence function is provided as a convenient free option. Managing PIN numbers is the sole responsibility of the individual user or the organization who sets it. In case the PIN number is forgotten, Philips service center can re-set it for you at a nominal charge after verification of ownership. Please note that this activity is not covered by standard warranty terms. 37 8. Troubleshooting & FAQs 8.3 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.: Recommended resolution for this minitor: 1366x768 @60Hz. Unplug all cables, then connect your PC to the • monitor that you used previously. In the Windows Start Menu, select Settings/ • Control Panel. In the Control Panel Window, select the Display icon. Inside the DisplayControl Panel, select the 'Settings' tab. Under the setting tab, in box labeled 'desktop area', move the sidebar to 1366x768 pixels. Open 'Advanced Properties' and set the • Refresh Rate to 60Hz, then click OK. Restart your computer and repeat step • 2 and 3 to verify that your PC is set at 1366x768@60Hz. Shut down your computer, disconnect your • old monitor and reconnect your Philips monitor. Turn on your monitor and then turn on your • PC. Q2: What is the recommended refresh rate for monitor? Ans.: Recommended refresh rate in monitors is 60Hz. In case of any disturbance on screen, you can set it up to 75Hz to see if that removes the disturbance. Q3: What are the .inf and .icm files on the CD- ROM? How do I install the drivers (.inf and .icm)? Ans.: These are the driver files for your monitor. Follow the instructions in your user manual to install the drivers. Your computer may ask you for monitor drivers (.inf and .icm files) or a driver disk when you first install your monitor. Follow the instructions to insert the ( companion CD-ROM) included in this package. Monitor drivers (.inf and .icm files) will be installed automatically. Q4: How do I adjust the resolution? Ans.: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows® Control Panel with the "Display properties". Q5: What if I get lost when I am making monitor adjustments via OSD? Ans.: Simply press the OK button, then select 'Reset' to recall all of the original factory settings. Q6: Is the monitor screen resistant to scratches? Ans.: In general it is recommended that the panel surface is not subjected to excessive shocks and is protected from sharp or blunt objects. When handling the monitor, make sure that there is no pressure or force applied to the panel surface side. This may affect your warranty conditions. 38 8. Troubleshooting & FAQs Q7: How should I clean the monitor surface? Ans.: For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc. Q8: Can I change the color setting of my monitor? Ans.: Yes, you can change your color setting through OSD control as the following procedures, Press "OK" to show the OSD (On Screen • Display) menu Press "Down Arrow" to select the option • "Color" then press "OK" to enter color setting, there are three settings as below. Color Temperature; The 2 settings are 1. 6500K, and 9300K. sRGB; this is a standard setting for ensuring 2. correct exchange of colors between different device (e.g. digital cameras, monitors, printers, scanners, etc) User Define; the user can choose his/her 3. preference color setting by adjusting red, green blue color. Note: A measurement of the color of light radiated by an object while it is being heated. This measurement is expressed in terms of absolute scale, (degrees Kelvin). Lower Kevin temperatures such as 2004K are red; higher temperatures such as 9300K are blue. Neutral temperature is white, at 6504K. Q9: Can I connect my monitor to any PC, workstation or Mac? Ans.: Yes. All Philips monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system. Please contact your Philips sales representative for more information. Q10: Are Philips monitors Plug-and- Play? Ans.: Yes, the monitors are Plug-and-Play compatible with Windows 7/Vista/XP/NT, Mac OSX, Linux Q11: What is Image Sticking, or Image Burn-in, or After Image, or Ghost Image in monitor panels? Ans.: Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging" or "ghost imaging", on your screen. "Burn-in", "after- imaging", or "ghost imaging" is a well-known phenomenon in monitor panel technology. In most cases, the "burned in" or "atter-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Warning Severe"burn-in" or "after-image" or"ghost image" symptoms will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. Q12: Why is my Display not showing sharp text, and is displaying jagged characters? Ans.: Your monitor works best at its native resolution of 1366x768@60Hz. For best display please use this resolution. 2011 © Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trade marks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice. M3197E1Q 家电维修资料网    www.520101.com                    免费下载各类电器说明书  www.520101.com