SERVICE MANUAL CD/DVD PLAYER US Model Canadian Model SPECIFICATIONS DVP-CX777ES Ver 1.0 2003.08 9-961-043-01 Sony Corporation 2003H05-1 Home Audio Company C 2003.08 Published by Sony Engineering Corporation Model Name Using Similar Mechanism NEW CD/DVD Mechanism Type CDM62-DVBU26 Base Unit Name DVBU26 Optical Pick-up Name KHM-290AAA System Laser: Semiconductor laser λ = 780 nm for CD λ = 650 nm for SA-CD and DVD Emission duration: continuous Signal format system: NTSC Audio characteristics Frequency response: DVD VIDEO (PCM 96 kHz): 2 Hz to 44 kHz (44 kHz: –2 dB ±1 dB), Super Audio CD: 2 Hz to 100 kHz (50 kHz: –3 dB ±1 dB), CD: 2 Hz to 20 kHz (±0.5 dB) Signal-to-noise ratio (S/N ratio): 115 dB (LINE OUT AUDIO L/R 1/2 jacks only) Harmonic distortion: 0.003 % Dynamic range: DVD VIDEO/Super Audio CD: 103 dB, CD: 99 dB Wow and flutter: Less than detected value (±0.001% W PEAK) Outputs (Jack name: Jack type/Output level/Load impedance) LINE OUT AUDIO L/R 1/2: Phono jack/ 2 Vrms/10 kilohms DIGITAL OUT (OPTICAL): Optical output jack/–18 dBm (wave length: 660 nm) DIGITAL OUT (COAXIAL): Phono jack/ 0.5 Vp-p/75 ohms 5.1CH OUTPUT: Phono jack/2 Vrms/ 10 kilohms COMPONENT VIDEO OUT (Y, PB/CB, PR/CR): Phono jack/Y: 1.0 Vp-p/PB/CB, PR/CR: interlace*=0.648 Vp-p, progressive or interlace**=0.7 Vp-p/ 75 ohms * BLACK LEVEL is ON ** BLACK LEVEL is OFF LINE OUT VIDEO 1/2: Phono jack/ 1.0 Vp-p/75 ohms S VIDEO OUPUT 1/2: 4-pin mini DIN/ Y: 1.0 Vp-p/C: 0.286 Vp-p /75 ohms S-LINK (CONTROL S IN): Mini jack General Power requirements: 120 V AC, 60 Hz Power consumption: 24 W Dimensions (approx.): 430 × 189 × 545 mm (17 × 7 1/2 × 21 1/2 in.) (width/height/ depth) incl. projecting parts Mass (approx.): 10 kg (22 lb 1 oz) Operating temperature: 5 ° C to 35 ° C (41 °F to 95 °F) Operating humidity: 25 % to 80 % Supplied accessories Specifications and design are subject to change without notice. • Audio/video cord (pinplug × 3 y pinplug • Remote commander (remote) (1) • Size AA (R6) batteries (2) × 3) (1) ENERGY STARR is a U.S. registered mark. As an ENERGY STARR Partner, Sony Corporation has determined that this product meets the ENERGY STARR guidelines for energy efficiency. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 2 DVP-CX777ES Self-diagnosis Function (When letters/numbers appear in the display) When the self-diagnosis function is activated to prevent the player from malfunctioning, a five-character service number (e.g., C 13 50) with a combination of a letter and four digits appears on the screen and the front panel display. In this case, check the following table. First three characters of the service number Cause and/or corrective action C 13 The disc is dirty. ,Clean the disc with a soft cloth. C 31 The disc is not inserted correctly. ,Re-insert the disc correctly. C 32 The front cover automatically opens and the player enters standby mode. ,Check that there is nothing wrong inside the rotary table, such as a fallen disc. After you have checked the inside of the rotary table and resolved any possible problems, press H. E XX (xx is a number) To prevent a malfunction, the player has performed the self-diagnosis function. ,Contact your nearest Sony dealer or local authorized Sony service facility and give the 5- character service number. Example: E 61 10 C:13:50 Note: Refer to the “4. TEST MODE” (page 23) for another self-diagnosis function. SELF DIAGNOSIS FUNCTION www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 3 DVP-CX777ES CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous ra- diation exposure. Notes on chip component replacement • Never reuse a disconnected chip component. • Notice that the minus side of a tantalum capacitor may be dam- aged by heat. Flexible Circuit Board Repairing • Keep the temperature of the soldering iron around 270 ˚C dur- ing repairing. • Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). • Be careful not to apply force on the conductor when soldering or unsoldering. SAFETY CHECK-OUT After correcting the original service problem, perform the follow- ing safety check before releasing the set to the customer: Check the antenna terminals, metal trim, “metallized” knobs, screws, and all other exposed metal parts for AC leakage. Check leakage as described below. LEAKAGE TEST The AC leakage from any exposed metal part to earth ground and from all exposed metal parts to any exposed metal part having a return to chassis, must not exceed 0.5 mA (500 microamperes.). Leakage current can be measured by any one of three methods. 1. A commercial leakage tester, such as the Simpson 229 or RCA WT-540A. Follow the manufacturers’ instructions to use these instruments. 2. A battery-operated AC milliammeter. The Data Precision 245 digital multimeter is suitable for this job. 3. Measuring the voltage drop across a resistor by means of a VOM or battery-operated AC voltmeter. The “limit” indication is 0.75 V, so analog meters must have an accurate low-voltage scale. The Simpson 250 and Sanwa SH-63Trd are examples of a pas- sive VOM that is suitable. Nearly all battery operated digital multimeters that have a 2 V AC range are suitable. (See Fig. A) Fig. A. Using an AC voltmeter to check AC leakage. 1.5 kΩ 0.15 µF AC voltmeter (0.75 V) To Exposed Metal Parts on Set Earth Ground ATTENTION AU COMPOSANT AYANT RAPPORT À LA SÉCURITÉ! LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS PUBLIÉS PAR SONY. SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB- LISHED BY SONY. UNLEADED SOLDER Boards requiring use of unleaded solder are printed with the lead- free mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size) : LEAD FREE MARK Unleaded solder has the following characteristics. • Unleaded solder melts at a temperature about 40 ˚C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350 ˚C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! • Strong viscosity Unleaded solder is more viscou-s (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges oc- cur such as on IC pins, etc. • Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 4 DVP-CX777ES Example of discs that the player cannot play The player cannot play the following discs: • All CD-ROMs (including PHOTO CDs)/ CD-Rs/CD-RWs other than those recorded in the following formats: –music CD format –video CD format –MP3 format that conforms to ISO9660* Level 1/Level 2, or its extended format, Joliet • Data part of CD-Extras • DVD-ROMs • DVD Audios * A logical format of files and folders on CD- ROMs defined by ISO (International Standards Organization). Also, the player cannot play the following discs: • A DVD VIDEO with a different region code. • A disc recorded in a color system other than NTSC, such as PAL or SECAM (this player conforms to the NTSC color system). • A disc that has a non-standard shape (e.g., card, heart). • A disc with paper or stickers on it. • A disc that has the adhesive of cellophane tape or a sticker still left on it. Notes • Note about DVD-RWs/DVD-Rs, DVD+RWs/ DVD+Rs, or CD-Rs/CD-RWs. Some DVD-RWs/DVD-Rs, DVD+RWs/ DVD+Rs, or CD-Rs/CD-RWs cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. Also, images in DVD-RWs with CPRM* protection may not be played if they contain a copy protection signal. “Copyright lock” appears on the screen. For more information, see the operating instructions for the recording device. Note that discs created in the Packet Write format cannot be played. * CPRM (Content Protection for Recordable Media) is a coding technology that protects copyright for images. This Player Can Play the Following Discs “DVD VIDEO” and “DVD-RW” are trademarks. Region code Your player has a region code printed on the back of the unit and will only play DVD VIDEOs (playback only) labeled with identical region codes. This system is used to protect copyrights. DVD VIDEOs labeled will also play on this player. If you try to play any other DVD VIDEO, the message “Playback prohibited by area limitations.” will appear on the TV screen. Depending on the DVD VIDEO, no region code indication may be labeled even though playing the DVD VIDEO is prohibited by area restrictions. Format of discs DVD VIDEO DVD-RW Super Audio CD VIDEO CD Music CD ALL X Region code • Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Note on playback operations of DVDs and VIDEO CDs Some playback operations of DVDs and VIDEO CDs may be intentionally set by software producers. Since this player plays DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available. Also, refer to the instructions supplied with the DVDs or VIDEO CDs. Copyrights This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 5 DVP-CX777ES SELF DIAGNOSIS FUNCTION .................................... 2 1. SERVICING NOTES ............................................... 6 2. GENERAL ................................................................... 10 3. DISASSEMBLY 3-1. Disassembly Flow ........................................................... 11 3-2. Case (ES) Assy ................................................................ 12 3-3. MB Board ........................................................................ 12 3-4. AV Board ......................................................................... 13 3-5. Bracket (L)/(R) ................................................................ 13 3-6. Front Panel Section ......................................................... 14 3-7. Cover (PT)/(CDM) .......................................................... 14 3-8. DVBU26 Assy ................................................................. 15 3-9. Power Block, Power Transformer (T102) ...................... 15 3-10. Table (400) Assy ............................................................. 16 3-11. Door Block, Base (Door) Assy ....................................... 16 3-12. DC Motor (Door) (M603) ............................................... 17 3-13. Holder (Table Sensor 400) .............................................. 17 3-14. D. SENS OUT Board, D. SENS IN Board..................... 18 3-15. Pop-up (400) Assy........................................................... 18 3-16. Door SW Board ............................................................... 19 3-17. Lock SW Board, Loading SW Board ............................. 20 3-18. CD/DVD Mechanism Deck Block (CDM62-DVBU26) ........................................................ 21 3-19. Motor (400) Assy (Loading) (M602)/(Table) (M601), Loading Motor Board ..................................................... 21 3-20. Optical Pick-up (KHM-290AAA) .................................. 22 4. TEST MODE .............................................................. 23 5. MECHANICAL ADJUSTMENTS ....................... 45 6. ELECTRICAL ADJUSTMENTS......................... 46 7. DIAGRAMS 7-1. Block Diagram – RF Section – ...................................... 50 7-2. Block Diagram – SERVO/CHANGER Section – ......... 51 7-3. Block Diagram – AUDIO Section – .............................. 52 7-4. Block Diagram – VIDEO Section – .............................. 53 7-5. Block Diagram – PANEL/POWER SUPPLY Section – .......................... 54 7-6. Note for Printed Wiring Boards and Schematic Diagrams ....................................................... 55 7-7. Schematic Diagram – MB Board (1/15) – .................... 57 7-8. Schematic Diagram – MB Board (2/15) – .................... 58 7-9. Schematic Diagram – MB Board (3/15) – .................... 59 7-10. Schematic Diagram – MB Board (4/15) – .................... 60 7-11. Schematic Diagram – MB Board (5/15) – .................... 61 7-12. Schematic Diagram – MB Board (6/15) – .................... 62 7-13. Schematic Diagram – MB Board (7/15) – .................... 63 7-14. Schematic Diagram – MB Board (8/15) – .................... 64 7-15. Schematic Diagram – MB Board (9/15) – .................... 65 7-16. Schematic Diagram – MB Board (10/15) – .................. 66 7-17. Schematic Diagram – MB Board (11/15) – .................. 67 7-18. Schematic Diagram – MB Board (12/15) – .................. 68 7-19. Schematic Diagram – MB Board (13/15) – .................. 69 7-20. Schematic Diagram – MB Board (14/15) – .................. 70 7-21. Schematic Diagram – MB Board (15/15) – .................. 71 7-22. Printed Wiring Board – MB Board (Component Side) – ................................... 72 7-23. Printed Wiring Board – MB Board (Conductor Side) –..................................... 73 TABLE OF CONTENTS 7-24. Printed Wiring Board – DRIVER Board – .................... 74 7-25. Schematic Diagram – DRIVER Board – ....................... 75 7-26. Printed Wiring Boards – MOTOR/SWITCH Section – ....................................... 76 7-27. Schematic Diagram – MOTOR/SWITCH Section – .... 77 7-28. Printed Wiring Boards – SENSOR Section –................ 78 7-29. Schematic Diagram – SENSOR Section – .................... 79 7-30. Printed Wiring Board – AV Board (Component Side) – .................................... 80 7-31. Printed Wiring Board – AV Board (Conductor Side) – ...................................... 81 7-32. Printed Wiring Board – RS-232C Board – ......................................................... 82 7-33. Schematic Diagram – AV (1/3)/RS-232C Boards – ...... 83 7-34. Schematic Diagram – AV Board (2/3) – ........................ 84 7-35. Schematic Diagram – AV Board (3/3) – ........................ 85 7-36. Printed Wiring Board – PANEL-L Board (Component Side) –......................... 86 7-37. Printed Wiring Board – PANEL-L Board (Conductor Side) – .......................... 87 7-38. Schematic Diagram – PANEL-L Board (1/2) – ............ 88 7-39. Schematic Diagram – PANEL-L Board (2/2) – ............ 89 7-40. Printed Wiring Boards – PANEL Section – .................. 90 7-41. Schematic Diagram – PANEL Section – ....................... 91 7-42. Printed Wiring Board – POWER Board – ..................... 92 7-43. Schematic Diagram – POWER Board – ........................ 93 7-44. IC Pin Function Description .......................................... 102 8. EXPLODED VIEWS 8-1. Overall Section ............................................................... 128 8-2. Front Panel Section ........................................................ 129 8-3. Power Block Section ...................................................... 130 8-4. Table Section .................................................................. 131 8-5. Chassis Section .............................................................. 132 8-6. Base (Door) Section ....................................................... 133 8-7. CD/DVD Mechanism Deck Section-1 (Pop-up Block) ............................................................... 134 8-8. CD/DVD Mechanism Deck Section-2 (Pulley Block) ................................................................ 135 8-9. CD/DVD Mechanism Deck Section-3 (Lever, Holder Block) .................................................... 136 8-10. CD/DVD Mechanism Deck Section-4 (Gear, Motor Block) ....................................................... 137 8-11. Optical Pick-up Section (DVBU26) .............................. 138 9. ELECTRICAL PARTS LIST .............................. 139 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 6 DVP-CX777ES SECTION 1 SERVICING NOTES The laser diode in the optical pick-up block may suffer electro- static break-down because of the potential difference generated by the charged electrostatic load, etc. on clothing and the human body. During repair, pay attention to electrostatic break-down and also use the procedure in the printed matter which is included in the repair parts. The flexible board is easily damaged and should be handled with care. NOTES ON LASER DIODE EMISSION CHECK The laser beam on this model is concentrated so as to be focused on the disc reflective surface by the objective lens in the optical pick-up block. Therefore, when checking the laser diode emis- sion, observe from more than 30 cm away from the objective lens. NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT CHECK OF POWER BOARD WITH THE POWER ON It is possible to analyze the defect with only POWER board power ON. Procedure: 1. Set to power OFF state. 2. Remove the connector from CN201 on the POWER board. 3. Short between CN201 pin 1 (P-CONT) and CN201 pin qa (EVER+3.3V) on the POWER board. 4. Turn the power ON. 5. Confirm that the voltage value of CN201 each pin on the POWER board satisfy following value . CN201 Pin Voltage Value pin 2 (EVER–11V) –11V pin 3 (SW–11V) –11V pin 6, 7 (SW+11V) +11V pin 8 (SW+3.3V) +3.3V pin qa (EVER+3.3V) +3.3V pin qs (SW+5V) +5V pin qd (EVER+5V) +5V – POWER Board (Conductor Side) – CN201 13 1 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 7 DVP-CX777ES ALIGNMENT OF GEAR (CAM) PHASE WITH DOOR ASSY CLEANING OF OPTICAL PICK-UP door assy gear (cam) Align a slit of door assy with a marking on the bottom land of gear tooth when the gear is rotated fully in arrow direction, as shown. optical pick-up pulley assy Remove the pulley assy, and clean the lens of optical pick-up through this hole. NOTE FOR INSTALLATION AV board AV board – Front side – MB board cables (MB board to driver board, sensor board) cables (MB board to driver board, sensor board) MB board AV board power block locking wire saddle MB board It takes care that the cables doesn’t hang down. cable (AV board to panel-L board) cables (MB board to driver board, sensor board) cable (MB board to led board) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 8 DVP-CX777ES AV board AV board cables It is made to contact and for there not to be a power block and cables. power block MB board power block driver board cables cables When installing the cables, it is made to make it crawl in a chassis. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 9 DVP-CX777ES SERVICE POSITION – MB board – – Optical pick-up block – MB board (CN102) Connect the jig (J-2501-086-A) to MB board (CN102) and panel-L board (CN1005). panel-L board (CN1005) optical pick-up (DVBU26) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 10 DVP-CX777ES Front panel Front panel display When playing back a DVD VIDEO/DVD-RW When playing back a VIDEO CD with Playback Control (PBC) When playing back a CD, Super audio CD, DATA CD (MP3 audio), or VIDEO CD (without PBC) Playing time Disc type Current audio signal Lights up when you can change the angle Current play mode Playing status Current title and chapter Current disc All discs mode Playing time Playing status Current play mode All discs mode Current disc Current scene Disc type Playing time Current track (CD, Super Audio CD, VIDEO CD) or album (DATA CD) Lights up when playing MP3 audio tracks Playing status Current disc Current play mode All discs mode Current index (CD, Super Audio CD, VIDEO CD) or track (DATA CD) Lights up when playing the multi-channel playback area on Super Audio CDs Disc type (“SACD” lights up during HD playback) Rear panel Remote SECTION 2 GENERAL This section is extracted from instruction manual. A [/1 (on/standby) button B PROGRESSIVE indicator — Lights up when the player outputs progressive signals. C SACD (Super Audio CD) indicator Lights up when: — playing a Super Audio CD. — no disc is inserted. D MULTI CHANNEL indicator Lights up when: —Playing a track or chapter that contains three or more audio signal channels. —no disc is inserted. E Front panel display F Front cover G OPEN/CLOSE button H A DISC EJECT button I N (play) button J X (pause) button K x (stop) button L +100 button M DISC CHANGE button/indicator N DIRECT SEARCH button/indicator O .–/>+/ENTER (previous/next/enter) dial P O RETURN button Q C/X/x/c/ENTER buttons R DISPLAY button S TOP MENU button T MENU button U VIDEO CONTROL button V SURROUND button W ONE/ALL DISCS button X FOLDER button Y LOAD button Z (remote sensor) wj VIDEO OFF indicator wk KEYBOARD jack wl FL OFF button/indicator e; TIME/TEXT button A DIGITAL OUT (COAXIAL) jack G COMPONENT VIDEO OUT (Y, PB/ CB, PR/CR) jacks H COMPONENT VIDEO OUT/SCAN SELECT switch I COMMAND MODE switch J RS232C jack* K S-LINK/CONTROL S IN jack B DIGITAL OUT (OPTICAL) jack C 5.1CH OUTPUT jacks D LINE OUT AUDIO L/R 1/2 jacks E LINE OUT VIDEO 1/2 jacks * This port is intended for future applications. F S VIDEO OUT 1/2 jacks L c / C SEARCH/STEP buttons M H PLAY button The H button has a tactile dot.* N X PAUSE button O C/X/x/c buttons P DISPLAY/FILE button Q TOP MENU/EDIT button R [/1 (on/standby) button S VOL (volume) +/– buttons The + button has a tactile dot.* T TV/VIDEO/DISC SKIP + button A TV/DISC EXPLORER/DVD switch B OPEN/CLOSE button C Number buttons The number 5 button has a tactile dot.* D CLEAR button E SUR (surround) button F VIDEO CONTROL button G SUBTITLE button H AUDIO button I PICTURE NAVI (picture navigation) button J REPEAT button K ./> PREV/NEXT (previous/ next) buttons U ENTER button V WIDE MODE/DISC SKIP – button W FOLDER button X PICTURE MEMORY button Y ANGLE button Z TIME/TEXT button wj SACD/CD (Super Audio CD/CD) button wk SACD MULTI/2CH (Super Audio CD multi/2 channel) button wl INSTANT SEARCH button e; INSTANT REPLAY button ea m/M SCAN/SLOW buttons es x STOP button ed ENTER button ef O RETURN button eg MENU/SORT button * Use the tactile dot as a reference when operating the player. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 11 • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW SECTION 3 DISASSEMBLY Set 3-2. CASE (ES) ASSY (Page 12) 3-3. MB BOARD (Page 12) 3-4. AV BOARD (Page 13) 3-5. BRACKET (L)/(R) (Page 13) 3-6. FRONT PANEL SECTION (Page 14) 3-7. COVER (PT)/(CDM) (Page 14) 3-8. DVBU26 ASSY (Page 15) 3-9. POWER BLOCK, POWER TRANSFORMER (T102) (Page 15) 3-10. TABLE (400) ASSY (Page 16) 3-11. DOOR BLOCK, BASE (DOOR) ASSY (Page 16) 3-12. DC MOTOR (DOOR) (M603) (Page 17) 3-13. HOLDER (TABLE SENSOR 400) (Page 17) 3-14. D. SENS OUT BOARD, D. SENS IN BOARD (Page 18) 3-15. POP-UP (400) ASSY (Page 18) 3-16. DOOR SW BOARD (Page 19) 3-17. LOCK SW BOARD, LOADING SW BOARD (Page 20) 3-18. CD/DVD MECHANISM DECK BLOCK (CDM62-DVBU26) (Page 21) 3-19. MOTOR (400) ASSY (LOADING) (M602)/(TABLE) (M601), LOADING MOTOR BOARD (Page 21) 3-20. OPTICAL PICK-UP (KHM-290AAA) (Page 22) Note 1: The process described in can be performed in any order. Note 2: Without completing the process described in , the next process can not be performed. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 12 Note: Follow the disassembly procedure in the numerical order given. 3-2. CASE (ES) ASSY 3-3. MB BOARD 3 three flat head screws 2 two flat head screws 5 case (ES) assy 4 two flat head screws 1 two flat head screws qs MB board 8 two screws (BVTP 3 × 8) 9 two harnesses 1 wire (flat type) (19 core) (CN102) 5 connector (CN105) 6 connector (CN103) 7 connector (CN106) 2 wire (flat type) (26 core) (CN203) 3 wire (falt type) (9 core) (CN204) 4 two wires (flat type) (23 core: CN601, 27 core: CN501) q; two screws (BVTP 3 × 8) qa connector (CN101) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 13 9 connector (CN201) 4 screw (BVTP 3 × 8) 8 two wires (flat type) (23 core: CN202, 27 core: CN203) 2 wire (flat type) (9 core) (CN204) 7 1 wire (flat type) (26 core) (CN203) 3 eight screws (BV/ring) q; two connectors (CN206, 207) qa two connectors (CN205, 208) qs connector (CN204) qd AV board 6 harness 5 +BV sumitite (B3) 3-4. AV BOARD 3-5. BRACKET (L)/(R) 4 screw (BVTP 3 × 8) 3 two screws (BVTP 3 × 8) 1 two screws (BVTP 3 × 8) 5 bracket (R) 2 bracket (L) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 14 3-6. FRONT PANEL SECTION 3-7. COVER (PT)/(CDM) 6 front panel section 1 five screws (BV/ring) 3 two screws (BVTP 3 × 8) 2 screw (BVTP 3 × 8) 5 claw 4 claw 1 screw (BVTP 3 × 8) 3 cover (PT) 2 screw (BVTP 3 × 8) 7 three screws (BV/ring) 4 six screws (BV/ring) 5 three screws (BV/ring) 6 cover (CDM) 8 bracket (CDM) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 15 3 two screws (BVTP 3 × 8) 1 three screws (BVTP 3 × 8) 5 bracket (top 400) block 6 torsion holder (magnet) block 8 torsion spring (MG) 7 washer q; 8 washer 2 screw (BVTP 3 × 8) 9 DVBU26 assy 4 screw (BVTP 3 × 8) 3-8. DVBU26 ASSY 3-9. POWER BLOCK, POWER TRANSFORMER (T102) q; power transformer (T102) 1 two screws (BVTP 3 × 8) 3 rear panel block 8 power block 6 two screws (BVTP 3 × 8) 4 connector (CN101) 5 connector (CN102) 9 four screws (BVTP 3 × 8) 7 screw (BVTP 3 × 8) 2 two screws (BV/ring) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 16 3-10. TABLE (400) ASSY 3-11. DOOR BLOCK, BASE (DOOR) ASSY 1 screw (M3 × 14) 2 guide block (door) 3 table (400) assy 4 10 washer Note for installation When installing the guide (door), align the positions as shown. 2 three screws (BVTP 3 × 8) 1 connector (CN904 ) 3 cover (table) 4 door block 5 two screws (BVTP 3 × 8) 6 eight screws (BVTP 3 × 8) 7 base (door) assy www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 17 3-12. DC MOTOR (DOOR) (M603) 3-13. HOLDER (TABLE SENSOR 400) 1 belt 4 door motor board 5 DC motor (door) (M603) 3 Remove two solderings. 2 two screws (BVTP 3 × 8) 1 four screws (BVTP 3 × 8) 4 sensor board 5 screw (PTTWH 3 × 6) 2 connector (CN83) 3 two connectors (CN81, CN82) 6 two claws 7 holder (table sensor 400) 6 claw www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 18 3-14. D. SENS OUT BOARD, D. SENS IN BOARD 3-15. POP-UP (400) ASSY 4 screw (PSW 3 × 8) 5 D. sens out board 1 screw (PTTWH 3 × 6) 7 D. sens in board 2 two step screws (T1) 3 bracket (sensor 400) 6 screw (PTTWH 3 × 6) 1 screw (PTPWH 3 × 6) 2 step screw 3 pop-up (400) assy www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 19 3-16. DOOR SW BOARD 5 two screws (BVTP 2.6 × 8) 3 screw (PTPWH 2.6 × 8) 1 screw (PTPWH 2.6 × 8) 1 Move the slider (pop-up) and the lever (pu joint) fully in the direction of the arrow A. 2 Install the gear (cam) in the direction shown in the illustration and rotate it fully in the direction of the arrow B. 3 When the gear (cam) happens to go too deep, return it to the original position in the direction of the arrow C. 4 gear (B) 2 gear (cam) 6 door SW board C B A lever (pu joint) two rotary switches slider (pop-up) gear (cam) door SW board The levers of the two rotary switches on the door SW board are shown in the illustration below. Precaution during the gear (cam) installation www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 20 3-17. LOCK SW BOARD, LOADING SW BOARD claws 1 Rotate the pulley (400) in the direction of the arrow A fully. 3 Rotate the pulley (400) in the direction of the arrow B fully. 2 screw (BVTP3 × 8) 5 tapping screw 4 belt 8 screw (BVTP 3 × 8) 0 screw (BVTP 2.6 × 8) qa loading SW board 9 lock SW board 7 gear (center) 6 pulley (400) Note for installation When installing the loading SW board and lock SW boards, align the leads position as shown. loading SW board lock SW board leads position A B www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 21 3-18. CD/DVD MECHANISM DECK BLOCK (CDM62-DVBU26) 3-19. MOTOR (400) ASSY (LOADING) (M602)/(TABLE) (M601), LOADING MOTOR BOARD 4 four screws (BVTP 3 × 8) 3 screw (PSW 3 × 8) 2 connector (CN903) 1 connector (CN905) 5 seven screws (BVTP 3 × 8) 6 CD/DVD mechanism deck block (CDM62-DVBU26) 4 motor (400) assy (loading) (M602) 1 two belts (400) 3 Remove two solders. 5 Remove two solders. 2 three screws (PTPWH 2.6 × 8) 6 motor (400) assy (table) (M601) 7 loading motor board www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 22 3-20. OPTICAL PICK-UP (KHM-290AAA) 8 optical pick-up (KHM-290AAA) 1 step screw (M) 5 insulator 2 step screw (M) 6 insulator 4 holder (BU) block 7 insulator 3 step screw (M) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 23 DVP-CX777ES SECTION 4 TEST MODE 4-1. GENERAL DESCRIPTION The Test Mode allows you to make diagnosis and adjustment eas- ily using the remote commander and monitor TV. The instructions, diagnostic results, etc. are given on the on-screen display (OSD). 4-2. STARTING TEST MODE Press the [TOP MENU], [CLEAR], I/1 keys on the remote com- mander in this order with the power of main unit in OFF status, and the Test Mode starts, then “DIAG START” will be displayed on the fluorescent display tube and the menu shown below will be displayed on the TV screen. At the bottom of menu screen, the model name and revision number are displayed. Last Off at the lower right of screen indicates the information code concerning the last power off. To execute each function, select the desired menu and press its number on the remote commander. To exit from the Test Mode, press the I/1 key. Test Mode Menu 0. Syscon Diagnosis 1. Drive Auto Adjustment 2. Drive Manual Operation 3. Mecha Aging 4. Emergency History 5. Version Information 6. Video Level Adjustment Exit: POWER Key Model :TTX-15xxxx Revision:x.xxx Last Off: xx Power Off Information Code List 00: Primary Power Off 01: Power Off Request from SYSTEM CONTROL 02: Power Off by Emergency Power Off Command from SYS- TEM CONTROL (if information is sent from SYSTEM CONTROL) 03: IF CON Judged that SYSTEM CONTROL is Faulty 04: Power Off from Diagnosis Mode of IF CON 05: Forced Power Off by the User 06: Power Off by Power Supply Voltage Monitor 4-3. SYSCON DIAGNOSIS The same contents as board detail check by serial interface can be checked from the remote commander. On the Test Mode Menu screen, press [0] key on the remote commander, and the following check menu will be displayed. ### Syscon Diagnosis ### Check Menu 0 . Quit 1 . All 2 . Version 3 . Peripheral 4 . Servo 5 . Supply 6 . AV Decoder 7 . Video 8 . Audio _ 0. (Quit) Quit the Syscon Diagnosis and return to the Test Mode Menu. 1. (All items continuous check) This menu checks all diagnostic items continuously. Normally, all items are checked successively one after another automatically unless an error is found, but at a certain item that requires judg- ment through a visual check to the result, the following screen is displayed for the key entry. ### Syscon Diagnosis ### Diag All Check No. 2 Version 2-3. ROM Check Sum Check Sum = xxxx Press NEXT Key to Continue Press PREV key to Repeat For the ROM Check, the check sum calculated by the Syscon is output, and therefore you must compare it with the specified value for confirmation. Following the message, press > key to go to the next item, or . key to repeat the same check again. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 24 DVP-CX777ES To quit the diagnosis and return to the Check Menu screen, press x or [ENTER] key. If an error occurred, the diagnosis is suspended and the error code is displayed as shown below. ### Syscon Diagnosis ### 3-2. EEPROM Check Error 03 : EEPROM Write/Read N Address : 00000001 Write Data: 2492 Read Data : 2490 Press NEXT Key to Continue Press PREV key to Repeat _ Press x key to quit the diagnosis, or . key to repeat the same item where an error occurred, or > key to continue the check from the item next to faulty item. * In “All item continuous check”, pressing stop or enter will not quit the diagnosis. Selecting [2] and subsequent items call the submenu screen of each item. When “———” is displayed in the submenu, it means that the test is not supported in the model. For example, if “5. Supply” is selected, the following submenu will be displayed. ### Syscon Diagnosis ### Check Menu No. 5 Supply 0. Quit 1. All 2. ARP Register Check 3. ARP to RAM Data Bus 4. ARP to RAM Address Bus 5. ARP RAM Check 0. (Quit) Quit the submenu and return to the main menu. 1. (All submenu items continuous check.) This menu checks 2 and subsequent items successively. At the item where visual check is required for judgment or an error occurred, the checking is suspended and the message is output for key entry. Normally, all items are checked successively one after another automatically unless an error is found. Selecting [2] and subsequent items executes respective menus and outputs the results. For the contents of each submenu, see “General Description of Checking Method” and “Check Items List”. General Description of Checking Method 2. Version (2-2) Revision ROM revision number is displayed. Error: Not detected. The revision number defined in the source file is displayed with four digits. (2-3) ROM Check Sum Check sum is calculated. Error: Not detected. 8-bit data are added up to the ROM address 0x000F0000 to 0x002EFFFF, and the result is displayed with 4-digit hexa- decimal number. Error is not detected. Compare the result with the specified value. (2-4) Model Type Model code is displayed. Error: Not detected. The model code read from the EEPROM is displayed with 2-digit hexadecimal number. (2-5) Region Region code is displayed. Error: Not detected. The region code determined from the model code is dis- played. (2-6) M’t Check Mount resistance is checked. Error 22: The region code does not accord. Check whether the region code that is deduced from model resistance and destination resistance accords with the re- gion code that is deduced from region resistance value. 3. Peripheral (3-2) EEPROM Check Data write t read, and accord check Error 03: EEPROM write/read discord 0x9249, 0x2942 and 0x4294 are written to the address 0x00 to 0xFF of the EEPROM and then read for checking. Be- fore writing, the data are saved, then after checking, they are written to restore the contents of EEPROM. (3-3) Gate Array Check Data write → read, and accord check Error 02: Gate Array write/read discord Data of 0x00 to 0xFF is written sequentialy to the address 0xF and then read for checking. (3-4) NAND FLASH Check Data delete → write → read, and accord check Error 04: delete error Error 05: write error Error 06: read data discord Error 21: more than ten blocks are defective Deleting, writing and checking read data are executed to the zeroth block of Flash memory. If any detective block is found, the address is displayed. When more than ten blocks are defective, it is considered as an error. (3-5) SACD Check Device reset t internal organs RAM check. Error 50: Write and read data discord. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 25 DVP-CX777ES (3-6) VENC Check Data write t read, and accord check Error 52: Write/read data discord Error may occur due to defect of access with syscon. (3-7) ————— Check no support. (3-8) EX RAM Check Test Data write t read, and accord check Error 02: The external RAM used in the system control is checked. 4. Servo (4-2) Servo DSP Check Data write t read, and accord check Error 12: Read data discord 0x9249, 0x2942 and 0x4294 are written to the RAM ad- dress 0x602 of the Servo DSP and then read for checking. (4-3) ————— Check no support. (4-4) RF Amp (SSI) W/R Check Data write t read, and accord check Error 13: RF Amp register write, and read data discord Implement 8-bit shift operation of the 0x01 to the read- able/writable register of the RF Amp. If once write data do not accord with read data, it is NG. 5. Data Supply System (5-2) ARP Register Check Data write t read, and accord check Error 08: ARP register write, and read data discord Data 0x00 to 0xFF is written sequentially to the ARP TMAX register (address 0xC6) and then read for checking. (5-3) ARP to RAM Data Bus Data write t read, and accord check Error 09: ARP Tt RAM data bus error Data 0x0001 to 0x8000 where one bit each is set to 1 are written to the address 0 of RAM (IC303) connected to the ARP (IC301) through the bus, then they are read and checked. In case of discord, written bit pattern and read data are displayed. If data where multiple bits are 1 are read, the bits concerned may touch each other. Further, if data where certain bit is always 1 or 0 regardless of written data, the line could be disconnected or shorted. (5-4) ARP to RAM Address Bus Data write t other address read discord check Error 10: ARP Tt RAM address bus error Caution: Address and data display in case of an error is different from the display of other diagnosis (described later). Before starting the test, all addresses of RAM (IC303) are cleared to 0x0000. First, 0xA55A is written to the address 0x00000, and the address data are read and checked from addresses 0x00001 to 0x80000 while shifting 1 bit each. Next, the data at that address is cleared, and it is written to the address 0x00001, and read and checked in the same manner. This check is repeated up to the address 0x80000 while shifting the ad- dress data by 1 bit each. If data other than 0 is read at the addresses except written address, an error is given because all addresses were al- ready cleared to 0. In this check, the error display pattern is different from that of other diagnosis; read data, written address, and read address are displayed in this order. How- ever, the message uses same template, and accordingly ex- change Address and Data when reading. The following dis- play, for example, ### Syscon Diagnosis ### 5-4. ARP to RAM Address Bus Error 10: ARP - RAM Address B Address : 0000A55A Write Data : 00000000 Read Data : 00080000 Press NEXT Key to Continue Press PREV key to Repeat _ shows the data 0xA55A was read from address 0x00080000 though it was written to the address 0x00000000. This im- plies that these addresses are in the form of shadow. Also, if the read data is not 0xA55A, another error will be present. (5-5) ARP RAM Check Data write t read, and accord check Error 11: ARP RAM read data discord The program code data stored in ROM are copied to all areas of RAM (IC303) connected to the ARP (IC301) through the bus, then they are read and checked if they ac- cord. If the detail check was selected initially, the data are written to all areas and read, then the same test is conducted once again with the data where all bits are inverted between 1 and 0. If discord is detected, faulty address, written data, and read data are displayed following the error code 11, and the test is suspended. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 26 DVP-CX777ES 6. AV Decoder (6-2) 1935 RAM Data write t read, and accord check Error 14: AVD RAM read data discord The program code data stored in ROM (IC106) are copied to all areas of RAM (IC404, 405) connected to the AVD (IC403) through the bus, then they are read and checked if they accord. Further, the same test is conducted once again with the data where all bits are inverted between 1 and 0. If discord is detected, faulty address, written data, and read data are displayed following the error code 14, and the test is suspended. During the test, OSD display becomes blank as the OSD area is also checked. (6-3) 1935 SP ROM t AVD RAM t Video OUT Error: Not detected. The data including sub picture streams in ROM (IC106) are transferred to the RAM (IC404, 405) in AVD (IC403), and output as video signals from the AVD (IC403). Though OSD display becomes blank, the output of video signals continues until the key is pressed. 7. Video Output (7-2) Color Bar AVD color bar command write t Video OUT Error: Not detected. The command is transferred to the AVD, and the color bar signals are output from video terminals. (7-3) Composite Out AVD color bar command write t Video (Composite, Y/C) OUT Error: Not detected. The command is transferred to the AVD, and the color bar signals are output from video terminals. (7-4) Y/C Out AVD color bar command write → Video (Composite, Y/C) OUT Error: Not detected. The command is transferred to the AVD, and the color bar signals are output from video terminals. They are output from all video terminals (Composite, Y/C, Component). (7-5) ————— Check no support. (7-6) Component Out AVD color bar command write t Video (Component, Y/ C) OUT Error: Not detected. The command is transferred to the AVD, and the color bar signals are output from video terminals. (7-7) ————— Check no support. 8. Audio Output (8-2) ARP t 1935 Data flow from supply system DRAM to SDRAM of AV Decoder is tested. Error 15: ARP t 1935 video NG 16: ARP t 1935 audio NG (8-3) Audy Register check of Audy (IC801) and SDRAM (IC802) check are performed. After above checks are performed, transit to the next test tone (8-4). (8-4) Test Tone Pink noise output Error: Not detected. In the models without DD output, the test tone is output from L and R of 2-channel only, and in the models with DD output, the test tone is output from L and R of 2-chan- nel, and all channels of 5.1 output. After turning on all outputs, each time the > key is pressed, the output channel is switched for individual chan- nel checking. Diagnosis Check Items List 2. Version Display (2-2) Revision (2-3) ROM Check Sum (2-4) Model Type (2-5) Region (2-6) M’t Check 3. Peripheral (3-2) EEPROM Check (3-3) Gate Array Check (3-4) NAND FLASH Check (3-5) SACD Check (3-6) VENC Check (3-7) ———— (Function not supported) (3-8) EX RAM Check 4. Servo (4-2) Servo DSP Check (4-3) ———— (Function not supported) (4-4) RF Amp (SSI) W/R Check 5. Data Supply System (5-2) ARP Register Check (5-3) ARP to RAM Data Bus (5-4) ARP to RAM Address Bus (5-5) ARP RAM Check 6. AV Decoder (6-2) 1935 RAM (6-3) 1935 SP 7. Video Output (7-2) Color Bar (7-3) Composite Out (7-4) Y/C Out (7-5) ———— (Function not supported) (7-6) Component Out (7-7) ———— (Function not supported) 8. Audio Output (8-2) ARP t 1935 (8-3) Audy (8-4) Test Tone www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 27 DVP-CX777ES Error Codes List 00: Error not detected 01: RAM write/read data discord 03: EEPROM NG 04: Flash memory clear error 05: Flash memory write error 06: Flash memory read data discord 08: ARP register read data discord 09: ARP Tt RAM data bus error 10: ARP Tt RAM address bus error 11: ARP RAM read data discord 12: Servo DSP NG 13: RF Amp NG 14: 1935 SDRAM NG 15: ARP t 1935 video NG 16: ARP t 1935 audio NG 1A:System call error (Function not supported) 1B:System call error (Parameter error) 1C:System call error (Illegal ID number) 20: System call error (Time out) 22: Resistor installation error 50: SACD Decoder W/R NG 52: Video Encoder W/R NG 55: External RAM W/R NG 90: Error occurred 91: User verification NG 92: Diagnosis cancelled 4-4. DRIVE AUTO ADJUSTMENT DVD reference disc Single Layer HLX-503 (J-6090-069-A) (NTSC) OR HLX-504 (J-6090-088-A) (NTSC) Dual Layer HLX-501 (J-6090-071-A) (NTSC) OR HLX-505 (J-6090-089-A) (NTSC) CD reference disc YEDS-18 (3-702-101-01) OR PATD-012 (4-225-203-01) On the Test Mode Menu screen, press [1] key on the remote com- mander, and the drive auto adjustment menu will be displayed. ## Drive Auto Adjustment ## Adjustment Menu 0. ALL 1. DVD-SL 2. CD 3. DVD-DL 4. LCD _ Exit: RETURN Normally, [0] is selected to adjust DVD (single layer), CD, and DVD (dual layer) in this order. But, individual items can be ad- justed for the case where adjustment is suspended due to an error. In this mode, the adjustment can be made easily through the op- eration following the message displayed on the screen. Which disc is currently adjusted is displayed on the fluorescent display tube. 0. ALL You will be asked if EEPROM data are initialized or not, and for this prompt, select [0] and press the [ENTER] key. First, the servo setting data in EEPROM, Emergency History and Hour Meter are cleared to initialize. Then, [1] DVD-SL disc, [2] CD disc, and [3] DVD-DL disc are adjusted in this order. Because the changer model can accept multiple discs in advance of adjustment, adjustments can be continued by exchanging discs automatically whenever an adjustment is completed following the instruction on screen. You can exit the adjustment by pressing the x button. In adjusting each disc, the mirror time is measured to check the disk type. In the auto adjustment, whether the disc type is correct is not checked unlike conventional models, and accordingly, take care not to in- sert a different type of disc. Three kinds of discs can be set in advance. In this case, set discs in order to the displayed number with following the massage. Every time after adjusting a disc, the disc is replaced and adjustment is continued automatically. Set Disc Disc slot number 1: DVD-SL Disc slot number 2: CD Disc slot number 3: DVD-DL www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 28 DVP-CX777ES 1. DVD Single Layer Disc Select [1], insert DVD single layer disc, and press [ENTER] key, and the adjustment will be made through the following steps, then adjusted values will be written to the EEPROM. The disc slot No. 1 is used in the changer type model. If there is no disc on the disc slot No. 1, the tray will be open to wait for closing. If there is a disc on the table, the adjustment starts immediately. If you put a disc prior to adjustment, confirm that the SL disc is set on the disc slot 1. DVD Single Layer Disc Adjustment Steps 1. Sled Reset 2. Disc Check Memory SL 3. Set Disc Type SL 4. Spindle Start 5. Laser Diode ON 6. Focus Error Check 7. Focus ON 0 with PI Level measure 8. Auto Track Offset Adjust L0 9. Try Level Check 10. Tracking ON 11. CLVA ON 12. Sled ON 13. Auto Focus Balance Adjust 14. Auto Loop Filter Offset Adjust 15. Auto Focus Gain Adjust L0 16. Auto Focus Balance Adjust L0 17. EQ Boost Adjust 18. Auto Loop Filter Offset Adjust 19. Auto Track Gain Adjust 20. RF Level Measure 21. Jitter measure 22. Eep Copy Loop Filter Offset 23. All Servo Off 2. CD Disc Select [2], insert CD disc, and press [ENTER] key, and the adjust- ment will be made through the following steps, then adjusted val- ues will be written to the EEPROM. The disc slot No. 2 is used in the changer type model. If there is no disc on the disc slot No. 2, the tray will be open to wait for closing. If there is a disc on the table, the adjustment starts immediately. If you put a disc prior to adjustment, confirm that the CD is set on the disc slot 2. CD Adjustment Steps 1. Sled Reset 2. Disc Check Memory CD 3. Set Disc Type CD 4. Spindle Start 5. Laser Diode ON 6. Focus Error Check 7. Focus ON 0 with PI Level measure 8. Auto Track Offset Adjust L0 9. Try Level Check 10. Tracking ON 11. CLVA ON 12. Sled ON 13. Auto Focus Balance Adjust 14. Auto Loop Filter Offset Adjust 15. Auto Focus Gain Adjust L0 16. Auto Focus Balance Adjust L0 17. EQ Boost Adjust 18. Auto Loop Filter Offset Adjust 19. Auto Track Gain Adjust 20. Copy Adjustment Data to LCD 21. RF Level Measure 22. Jitter measure 23. All Servo Off 3. DVD Dual Layer Disc Select [3], insert DVD dual layer disc, and press [ENTER] key, and the adjustment will be made through the following steps, then adjusted values will be written to the EEPROM. The disc slot No. 3 is used in the changer type model. If there is no disc on the disc slot No. 3, the tray will be open to wait for closing. If there is a disc on the table, the adjustment starts immediately. If you put a disc prior to adjustment, confirm that the DL disc is set on the disc slot 3. DVD Dual Layer Disc Adjustment Steps 1. Sled Reset 2. Disc Check Memory DL 3. Set Disc Type DL DVD DL Layer 1 Adjust 4. Spindle Start 5. Laser Diode ON 6. Focus ON 0 with PI Level measure 7. Auto Track Offset Adjust L1 8. Tracking ON 9. ClVA ON 10. Sled ON 11. Auto Focus Balance Adjust 12. Auto Loop Filter Offset Adjust 13. Auto Focus Gain Adjust L1 14. EQ Boost Adjust L1 15. Auto Track Gain Adjust L1 16. Jitter measure DVD DL Layer 0 Adjust 17. Focus Jump (L1 t L0) 18. Auto Track Offset Adjust L0 19. Tracking ON 20. ClVA ON 21. Sled ON 22. Auto Focus Balance Adjust 23. Auto Focus Gain Adjust L0 24. Auto Focus Balance Adjust L0 25. EQ Boost Adjust L0 26. Auto Track Gain Adjust L0 27. Jitter measure 28. All Servo Stop 4. LCD LCD disc is not adjusted because the adjusted data of CD are re- flected, and SACD (hybrid disc) is not adjusted because the ad- justed data of CD and DVD-DL are reflected. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 29 DVP-CX777ES 4-5. DRIVE MANUAL OPERATION On the Test Mode Menu screen, select [2], and the manual opera- tion menu will be displayed. For the manual operation, each servo on/off control and adjustment can be executed manually. ## Drive Manual Operation ## Operation Menu 1. Disc type 2. Servo Control 3. Track/Layer Jump 4. Manual Adjustment 5. Auto Adjustment 6. Memory Check 7. Changer Manual Move 8. Changer Mecha Check 0. Disc Check Memory _ Exit: RETURN In using the Manual Operation menu, take care of the following points. These commands do not provide protection, thus requiring correct operation. The sector address or time code field is dis- played when a disc is loaded. 1. Set correctly the disc type to be used on the Disc Type setting screen. The Disc Type setting must be performed after a disc was loaded. The set Disc Type is cleared when the tray is opened. 2. After power ON, if the Manual Operation was selected, first perform “Reset SLED TILT” by opening 1. Disc Type screen. 3. In case of an alarm, immediately press the x button to stop the servo operation, and turn the power OFF. Basic operation (controllable from front panel or remote com- mander) I/1 : Power OFF x : Servo stop A (DISC EJECT) : Stop+Eject/Loading O (RETURN) : Return to Operation Menu or Test Mode Menu > , . : Transition between sub modes of menu [1] to [9], [0] : Selection of menu and items Cursor [Q]/[q] : Increase/Decrease in manually adjusted value 0. Disc Check Memory Disc Check 1. SL Disc Check 2. CD Disc Check 3. DL Disc Check 0. Reset SLED TILT _ On this screen, the mirror time is measured and written to the EEPROM to check the disc type. First, set a DVD SL disc and press [1], then set a CD disc and press [2], and finally set a DVD DL disc and press [3]. The measured mirror time is displayed re- spectively. The adjustment must be executed more than once after default data were written. From this screen, you can go to another mode by pressing > or . key, but you cannot enter this mode from another mode. You can enter this mode from the Operation Menu screen only. 1. Disc Type Disc Type 1. Disc Type Auto Check 2. DVD SL 12cm 3. DVD DL 12cm 4. CD 12cm 5. LCD 12cm 6. DVD SL 8cm 7. DVD DL 8cm 8. CD 8cm 9. LCD 8cm 0. Reset SLED TILT _ EMG. 00 0. Reset SLED TIL On this screen, select the disc type. To select the disc type, press the number of the loaded disc. The selected disc type is displayed at the bottom. Selecting [1] automatically selects and displays the disc type. In case of wrong display, retry “Disc Check Memory”. Also, opening the tray causes the set disc type to be cleared. In this case, set the disc type again after loading. In performing manual operation, the disc type must be set. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 30 DVP-CX777ES Once the disc type has been selected, the sector address or time code display field will appear as shown below. These values are displayed when PLL is locked. Disc Type 1. Disc Type Auto Check 2. DVD SL 12cm 3. DVD DL 12cm 4. CD 12cm 5. LCD 12cm 6. DVD SL 8cm 7. DVD DL 8cm 8. CD 8cm 9. LCD 8cm 0. Reset SLED TILT _ SA.------ SI.-- EMG.00 DVD SL 12cm Jitter FF Display when DVD SL 12cm disc was selected Disc Type 1. Disc Type Auto Check 2. DVD SL 12cm 3. DVD DL 12cm 4. CD 12cm 5. LCD 12cm 6. DVD SL 8cm 7. DVD DL 8cm 8. CD 8cm 9. LCD 8cm 0. Reset SLED TILT _ TC.--:--:-- EMG.00 CD 12cm Jitter FF Display when CD 12cm disc was selected [0] Reset SLED TILT : Reset the Sled and Tilt to initial position. (Reset the Sled only to initial position be- cause the Tilt mechanism is not available in this model.) [1] Disc Type Check : Judge automatically the loaded disc. As the judged result is displayed at the bot- tom of screen, make sure that it is correct. If Disc Check Memory menu has not been executed after EEPROM default setting, the disc type cannot be judged. In this case, return to the initial menu and make a check for three types of discs (SL, DL, CD). [2] to [9] : Select the loaded disc. The adjusted value is written to the address of selected disc. No further entry is necessary if [1] was selected. 2. Servo Control Servo Control 1. LD Off R. Sled FWD 2. SP Off L. Sled REV 3. Focus Off 4. TRK. Off 5. Sled Off 6. CLVA Off 7. FCS. Srch Off 0. Reset SLED TILT _ SA.------ SI.-- EMG.00 DVD SL 12cm Jitter FF On this screen, the servo on/off control necessary for replay is executed. Normally, turn on each servo from 1 sequentially and when CLVA is turned on, the usual trace mode becomes active. In the trace mode, DVD sector address or CD time code is displayed. This is not displayed where the spindle is not locked. The spindle could run overriding the control if the spindle system is faulty or RF is not present. In such a case, do not operate CLVA. [0] Reset SLED TILT : Reset the Sled and Tilt to initial position. (Reset the Sled only to initial position be- cause the Tilt mechanism is not available in this model.) [1] LD : Turn ON/OFF the laser. [2] SP : Turn ON/OFF the spindle. [3] Focus : Search the focus and turn on the focus. [4] TRK. : Turn ON/OFF the tracking servo. [5] Sled : Turn ON/OFF the sled servo. When PLL is not locked (cannot be locked), the sled servo is not turned ON. The display keeps OFF.) [6] CLVA : Turn ON/OFF normal servo of spindle servo. [7] FCS. Srch : Apply same voltage as that of focus search to the focus drive to check the focus drive system. 5 Sled FWD : Move the sled outward. Perform this op- eration with the tracking servo turned off. % Sled REV : Move the sled inward. Perform this opera- tion with the tracking servo turned off. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 31 DVP-CX777ES 3. Track/Layer Jump Track/Layer Jump 1. 1Tj FWD R. Fj (L1->L0) 2. 1Tj REV L. Fj (L0->L1) 3. 2Tj FWD U. Lj (L1->L0) 4. 2Tj REV D. Lj (L0->L1) 5. NTj FWD 6. NTj REV 7. 500Tj FWD 8. 500Tj REV 9. 10k/20k FWD 0. 10k/20k REV _ SA.------ SI.-- EMG.00 DVD DL 12cm Jitter FF On this screen, track jump, etc. can be performed. Only for the DVD-DL, the focus jump and layer jump are displayed in the right field. [1] 1Tj FWD : 1-track jump forward. [2] 1Tj REV : 1-track jump reverse. [3] 2Tj FWD : 2-track jump forward. [4] 2Tj REV : 2-track jump reverse. [5] NTj FWD : N-track jump forward. [6] NTj REV : N-track jump reverse. [7] 500Tj FWD : Fine search forward. [8] 500Tj REV : Fine search reverse. [9] 10k/20k FWD : Direct search forward. [0] 10k/20k REV : Direct search reverse. – The following commands are valid for DVD-DL disc only – 5 (L1 t L0): Focus jump (Trk/Sled Servo OFF) forward. % (L0 t L1): Focus jump (Trk/Sled Servo OFF) reverse. $ (L1 t L0): Layer jump (Trk/Sled Servo ON) forward. 4 (L0 t L1): Layer jump (Trk/Sled Servo ON) reverse. 4. Manual Adjustment Manual Adjustment:Up/Down 1. TRK. Offset 2. Focus Gain 3. TRK. Gain 4. Focus Offset 5. Focus Balance 6. L.F. Offset 7. Analog FRSW 8. PLL Dac Gain 9. EQ BOOST 0. TRK. Balance _ SA.------ SI.-- EMG. 00 DVD SL 12cm Jitter FF On this screen, each item can be adjusted manually. Select the desired number [1] to [0] from the remote commander, and cur- rent setting for the selected item will be displayed, then increase or decrease numeric value with $ key or 4 key. This value is stored in the EEPROM. If CLV has been applied, the jitter is dis- played for reference for the adjustment. [1] TRK. Offset : Adjusts tracking offset. [2] Focus Gain : Adjusts focus gain. [3] TRK. Gain : Adjusts track gain. [4] Focus Offset : Adjusts focus offset. [5] Focus Balance : Adjusts focus balance. [6] L.F. Offset : Adjusts loop filter offset. [7] Analog FRSW : Sets select switch of analog feedback circuit. [8] PLL Dac Gain : Adjusts D/A converter gain of PLL. [9] EQ BOOST : Adjusts boost amount of equalizer. [0] TRK. Balance : Adjusts tracking balance. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 32 DVP-CX777ES 5. Auto Adjustment Auto Adjustment 1. Auto TRK. Offset 2. Auto FCS Balance 3. Auto Focus Offset 4. Auto Focus Gain 5. Auto TRK. Gain 6. Auto EQ. 7. Auto L.F. Offset 8. Auto Group Delay 9. Auto TRK. Balance _ SA.------ SI.-- EMG.00 DVD SL 12cm Jitter FF On this screen, each item can be adjusted automatically. Select the desired number [1] to [8] from the remote commander, and se- lected item is adjusted automatically. [1] Auto TRK. Offset : Adjusts tracking offset. [2] Auto FCS Balance : Adjusts focus balance. [3] Auto Focus Offset : Adjusts focus offset. [4] Auto Focus Gain : Adjusts focus gain. [5] Auto TRK. Gain : Adjusts track gain. [6] Auto EQ : Adjusts EQ. [7] Auto L.F. Offset : Adjusts loop filter offset. [8] Auto Group Delay : Adjusts amount of group delay. [9] Auto TRK. Balance : Adjusts tracking balance. 6. Memory Check The display image is shown below and three screens in total can be selected. EEPROM Data 1 -- DL -- CD LCD SL L0 L1 Focus Gain xx xx xx xx xx TRK. Gain xx xx xx xx xx FCS Balance xx xx xx xx xx Focus Bias xx xx xx xx xx TRV. Offset xx xx xx xx xx L.F. Offset xx xx xx xx xx EQ. Boost xx xx xx xx xx _ UP : Last Data DOWN : Next Data CLEAR : Default Set page.1/3 EEPROM Data 2 -- DL -- CD LCD SL L0 L1 RF Jitter xx -- xx xx xx RF Level xx -- xx -- -- FE Level xx -- xx -- -- FE Balance xx -- xx -- -- TRV.Level xx -- xx -- -- TE Gain xx xx -- -- -- PI Level xx -- xx xx -- _ UP : Prev Data DOWN : Next Data CLEAR : Default Set page.2/3 EEPROM Data 3 -- DL -- CD LCD SL L0 L1 Analog FRSW xx xx xx xx xx PLL Dac Gain xx xx xx xx xx Mirror Time xx xx xx xx xx TRK. Balance xx xx xx xx xx THR A&L : xx xx xx/xx xx xx _ UP : Prev Data DOWN : First Data CLEAR : Default Set page.3/3 On this screen, current servo adjusted data stored in the EEPROM are displayed. The adjusted data are initialized by pressing the [CLEAR] key, but be careful that they are not recoverable after initialization. Before clearing the adjusted data, make a note of the set data. This screen will also appear if [0] All is selected in the Drive Auto Adjustment. In this case, default setting cannot be made. “THR A&L” data on the third page cannot be changed if default setting is once made. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 33 DVP-CX777ES 7. Changer Manual Move On this test mode screen, selecting [7] enables the machine opera- tion such as disc loading. The following screen appears. Display when [7] is selected in the Drive Manual Operation ## Changer Manual Move ## ENTER : Mecha Initial PLAY : Loading In STOP : Loading Out OP/CL : Door Open/Close UP : Poper Up DOWN : Poper Down jogFOR : Table R StepTurn jogPRV : Table L StepTurn DISP : Sensor Status _ RETURN : Exit [ENTER] : Performs initialization of mechanism. Mecha Initial Because the mechanical initialization is per- formed when the machine enters the Drive Manual Operation mode, use this item when an error such as adjustment error occurs. [PLAY] : Loads the disc from the chucking position of Loading In the T. table toward inside the MD. When the Disc Load is selected, a series of operation starting from Loading – Chuck- ing is performed. [STOP] : Moves the disc from inside the MD to the T. Loading Out table. When the Disc Unload is selected, a series of operation starting from Unloading – Chucking is performed. [OP/CL] : Opens and closes the door. Door Open/Close [UP] : Pops up the lever. Poper Up [DOWN] : Pops down the lever. Poper Down [jog FOR] : Moves the T. table to the right in units of Table R step Turn the slit. The T. table number is incremented in the direction of positive (+) number. [jog PRV] : Moves the T. table to the left in units of the Table L step Turn slit. The T. table number is decremented in the direction of negative (–) number. [DISP] : When this item is selected, the 400CHG Sensor Status Sensor Check appears on the screen. [RETURN] : Returns to the Operation Menu. Exit Display when the Sensor Status is selected in the Changer Manual Move. ## 400CHG Sensor Check ## Table 1/2/3/4 : X/X/X/X Table lock : X Load in : X Load out : X Door open : X Door close : X Poper up : X Poper down : X Disc Sensor : XXX _ RETURN : Exit Table 1/2/3/4 : Indicates table sensor 1/2/3/4 status. ( 1 : High , 2 : Low ) Table lock : Indicates each switch status. Load in/out ( 1 : On , 2 : Off ) Door open/close Poper up/down Disc Sensor : Indicates sensitivity of the disc sensor. The value is raging from 0 to 3FF. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 34 DVP-CX777ES 8. Changer Mecha Check On this test mode screen, selecting [8] enables the table sensor and the disc sensor adjustment. The following screen appears. Display when [8] is selected in the Drive Manual Operation ## Changer Mecha Check ## ENTER : Mecha Initial OP/CL : Disc Load/UnLoad jogFOR : Table R StepTurn jogPRV : Table L StepTurn PLAY : Table Rotate PAUSE : Mecha Adjust DISP : Sensor Status _ RETURN : Exit All operations are the same as those of the Changer Manual Move except [OP/CL], [PLAY] and [PAUSE]. [OP/CL] : Loads the disc from the chucking position Disc Load/UnLoad of the T.table toward inside the MD or from inside the MD to the T.table. When the Disc Load is selected a series of operation starting from Door Close – T.table Rotate – Chucking is performed. When the Disc UnLoad is selected a series of operation starting from Unchucking – T.table Rotate – Door Open is performed. [PLAY] : Enters the Disc Sensor Adjustment Mode. Table Rotate (Refer to the “5. Mechanical Adjustments” (page 45)) The 400CHG Table Rotate appears on the screen. [PAUSE] : Enters the Table Sensor Adjustment Mode. Mecha Adjust (Refer to the “5. Mechanical Adjustments” (page 45)) The 400CHG Mecha Adjust appears on the screen. Display when [PLAY] is selected in the Changer Mecha Check. ## 400CHG Table Rotate ## RIGHT : Turn Right LEFT : Turn Left Table 1/2/3/4 : X/X/X/X Disc Sensor : XXX RETURN : Exit [RIGHT] : Rotates T.table anti clock wise. Turn Right [LEFT] : Rotates T.table clock wise. Turn Left Table 1/2/3/4 : These items are the same as those of the Disc Sensor 400CHG Sensor Check. Display when [PAUSE] is selected in the Changer Mecha Check. ## 400CHG Mecha Adjust ## UP : Load in DOWN : Load out RIGHT : Pop Up LEFT : Pop Down Table 1/2/3/4 : X/X/X/X RETURN : Exit [UP] : Loads the disc from the chucking position Load in of the T.table toward inside the MD during pressing [UP]. [DOWN] : Loads the disc from inside the MD to the Load out T.table during pressing [DOWN]. [RIGHT] : Pops up the lever. Pop Up [LEFT] : Pops down the lever. Pop Down Table 1/2/3/4 : This item is the same as that of the 400CHG Sensor Check. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 35 DVP-CX777ES 4-6. MECHA AGING The mechanism aging is not supported. 4-7. EMERGENCY HISTORY ### EMG. History ### Laser Hours CD xxh xxm DVD xxh xxm 1. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 _ Select : 1-9 Scroll : UP/DOWN (1: Last EMG.) Exit : RETURN On the Test Mode Menu screen, selecting [4] displays the infor- mation such as servo emergency history. The history information from last “1” up to “10” can be scrolled with $ key or 4 key. Also, specific information can be displayed by directly entering that number with the ten-key pad from [1] to [9]. The upper two lines display the laser ON total hours. Data below minutes are omitted. Clearing History Information Clearing laser hours Press [DISPLAY] and [CLEAR] keys in this order. Both CD and DVD data are cleared. Clearing emergency history Press [TOP MENU] and [CLEAR] keys in this order. Initializing setup data Press [MENU] and [CLEAR] keys in this order. The data have been initialized when “Set Up Initialized” mes- sage is displayed. The EMG. History display screen will be restored soon. 4-8. VERSION INFORMATION ### Version Information ### IF con. Ver:x.xxx(xxxx) Group xx SYScon. Ver:x.xxx(xxxx) Model xx Region 0x Servo DSP Ver: x.xxx AVD ucode Ver: xxxxxxxx Exit : RETURN The ROM version, region code, OPT type, etc. are displayed if [5] is selected in the Test Mode Menu. The parenthesized hexadeci- mal number in the version number field indicates the checksum value of the ROM. * Note after Downloading After downloading ROM data, sometimes it happens that checksum is not the same as that of ROM data that has been downloaded. In such a case, go back to the menu screen and select “0. Syscon Diagnosis”, then select “1. All” in “2. Version”. If the result of this operation does not give an agreement, it must be either Download error or ROM error. 4-9. VIDEO LEVEL ADJUSTMENT On the Test Mode Menu screen, selecting [6] displays color bars for video level adjustment. During display of color bars, OSD dis- appears but the menu screen will be restored if pressing any key. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 36 DVP-CX777ES 4-10. IF CON SELF DIAGNOSTIC FUNCTION 1. PANEL-L BOARD (IF CON) TEST MODE The PANEL-L board test mode is the IF CON self diagnostic mode. The IF CON can diagnose the functions of the PANEL-L board that the IF CON controls. Normally, the IF CON makes a serial communication with the SYSTEM CONTROL and operates fol- lowing he commands from the SYSTEM CONTROL, but in the Test mode, the IF CON operates independently from the SYS- TEM CONTROL. Execute the Self Check Mode along the following flow. 2. OPERATION OF SELF CHECK MODE The Self Check mode is the function to conduct the basic test to the FL display and panel section. 2-1. How to enter the Self Check mode The Self Check mode starts if either of the following conditions is satisfied. Condition 1: With the SELF_CHECK (pin oj) of the IF CON (IC1003) on the PANEL-L board kept “low”, turn the power on. (Short the CL1001.) Condition 2: While pressing the x key on the set when the set is in standby state, press the O (RETURN) t [DISPLAY] key on the remote commander and the mode transits to the Self Check mode. When the Self Check mode started, “TEST START” is displayed on the FL tube for 2 seconds and then the Self Check proceeds to the IF CON information display. 2-2. How to release the Self Check mode To release the Self Check mode, press the I/1 key on the set or remote commander during the Self Check mode. I/F CON information FL tube GRID and SEGMENT check SIRCS reception check KEY check JOG and LED check KEYBOARD check CIS check START FINISH (Note) Note: As for the CIS check, conduct the test by another method. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 37 DVP-CX777ES INDEX INDEX PROGRESSIVE ALL DISCS SHUFFLE VIDEO VIDEO SACD SACD VCD VCD DVD DVD CD CD AUDIO AUDIO MP3 REPEAT 1 PGM A- B Digital SEC NTSC DISC ANGLE ANGLE MULTI MIN HOUR HOUR CHAP CHAP TITLE TITLE GROUP TRACK TRACK ; (2) MODEL display (for 2 seconds) (3) Version display (for 2 seconds) (4) ROM creation date display (for 2 seconds) 2-3. IF CON information display Upon transition to the IF CON information display, the display of (1) to (4) shown below is repeated. (1) FLD all ON (for 2 seconds) If the JOG dial on the front panel of the set is pressed, the test proceeds to the following FL tube GRID and SEGMENT check. INDEX PROGRESSIVE ALL DISCS SHUFFLE VIDEO SACD VCD DVD CD AUDIO MP3 REPEAT 1 PGM A- B Digital ; SEC NTSC DISC ANGLE MULTI MIN HOUR CHAP TITLE GROUP TRACK INDEX PROGRESSIVE ALL DISCS SHUFFLE VIDEO SACD VCD DVD CD AUDIO MP3 REPEAT 1 PGM A- B Digital ; SEC NTSC DISC ANGLE MULTI MIN HOUR CHAP TITLE GROUP TRACK INDEX PROGRESSIVE ALL DISCS SHUFFLE VIDEO SACD VCD DVD CD AUDIO MP3 REPEAT 1 PGM A- B Digital ; SEC NTSC DISC ANGLE MULTI MIN HOUR CHAP TITLE GROUP TRACK www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 38 DVP-CX777ES 2-4. FL tube GRID and SEGMENT check First, a grid lights up one after another, and when grid 16 lights up, all grids light up. Next, all grids go off, and segments are displayed while changing the patterns. A way of this display is repeated. (The interval of grid lighting is 0.2 second, and that of segment lighting is 0.3 second.) If the JOG dial on the front panel of the set is pressed, the test proceeds to the following SIRCS reception check. 2-5. SIRCS reception check Upon start of the SIRCS reception check, “SIRCS CHECK” is displayed on the FL tube. Once the SIRCS key code is received, the test proceeds to the fol- lowing KEY check. If the JOG dial on the front panel of the set is pressed as a cancel processing of the SIRCS reception check, the test proceeds to the following KEY check. FL tube GRID check The 18th SEG of each GRID on GRID16 on ALL OFF The 1st SEG of each GRID on The 2nd SEG of each GRID on GRID1 on (0.2sec interval) (0.2sec interval) (0.2sec interval) (0.3sec interval) (0.3sec interval) (0.3sec interval) (0.3sec interval) (ALL GRIDs light up) (0.2sec interval) GRID2 on FL tube GRID check FINISH JOG dial is pressed? YES NO Wait for SIRCS code receiving (Once the SIRCS code is received, the check finishes.) Cancel processing (Press the JOG dial) SIRCS reception check SIRCS reception check FINISH 2-6. KEY check After the SIRCS reception check finished, the KEY check is ex- ecuted. Upon start of the KEY check, “KEY CHECK” is displayed on the FL tube. 25 keys are checked as described below. Each time a key (except I/1 key) is pressed, the specified seg- ment lights up, and at one second after all keys were pressed, all of FL tube go off and the Key check finishes. If the SIRCS key code is received as a cancel processing of the KEY check, the test proceeds to the following JOG and LED check. KEY check AUDIO VIDEO N PROGRESSIVE ALL DISCS TRACK ;Digital MP3 SHUFFLE REPEAT 1 PGM A– B MULTI ANGLE NTSC DISC GROUP TITLE X FL OFF TIME/TEXT VIDEO CONTROL SURROUND VIDEO OFF LOAD FOLDER 1/ALL DISC A(DISC EJECT) OPEN/CLOSE N X x TOP MENU MENU DISPLAY ORETURN t R T r ENTER JOG ENTER +100 DISC CHANGE DIRECT SEARCH VCD VCD DVD VD CD CD SA SACD CD KEY check FINISH Cancel processing (SIRCS key code receiving) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 39 DVP-CX777ES 2-7. JOG and LED check After the Key check finished, the JOG and LED check is executed as follows. Upon start of the JOG and LED check, “JOG AND LED” is dis- played on the FL tube. There are seven LEDs. The order in which the LEDs light up when the JOG dial is rotated is as described below. If the JOG dial is pressed during the JOG and LED check, the JOG and LED check finishes and the test proceeds to the follow- ing KEYBOARD check. SACD (White) (Turn clockwise) (Turn counterclockwise) FL OFF (Amber) MULTI CHANNEL (Blue) VIDEO OFF (Amber) DISC CHANGE (Amber) DIRECT SERCH (Green) DIRECT SERCH (Green) DISC CHANGE (Amber) VIDEO OFF (Amber) MULTI CHANNEL (Blue) FL OFF (Amber) SACD (White) PROGRESSIVE (Blue) PROGRESSIVE (Blue) JOG and LED check If the JOG dial is rotated clockwise, LEDs light up one after another clockwise, or if the JOG dial is rotated counterclockwise, LEDs light up one after another counterclockwise. The check finishes when the JOG dial is pressed. (If the JOG dial has not been rotated at all in CW or CCW direction, the JOG error is displayed at the end of Self check mode.) JOG and LED check FINISH If the JOG dial is not pressed If the JOG dial was pressed KEYBOARD check Received from keyboard? KEYBOARD check FINISH YES NO 2-8. KEYBOARD check After the JOG and LED check finished, the KEYBOARD check is executed. Once a signal is received from the keyboard, the KEYBOARD check finishes. The “KEYBOARD” is displayed on the FL tube until a signal is received from the keyboard. If the JOG dial on the front panel of the set is pressed during the KEYBOARD check, the KEYBOARD check finishes and the test proceeds to the following check. 2-9. CIS check The CIS check is conduced by another method, and therefore it is not executed in the IF CON Self Check mode. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 40 DVP-CX777ES Also, if two or more checks have not completed yet 2-10. Operation at completion of Self Check Mode After the CIS check finished, characters indicating the comple- tion of Self Check mode are displayed. At this time, even if a signal from a key on the set, remote com- mander, or keyboard is received, nothing changes. At the SIRCS reception check, KEY check, JOG and LED check, and KEYBOARD check, if you proceed to the next check without completing current check, the check name that has not completed yet is displayed instead of “TEST OK”, as follows. Using the grid 1 to grid 12, the following characters are displayed. "TEST OK" Self check mode FINISH All four checks are erroneous “S KY J KB NG” Three checks are erroneous “S J KB NG” “S KY KB NG” Two checks are erroneous “ KY KB NG” “ KY J NG” If SIRCS reception check has not completed (If JOG dial is pressed during SIRCS recep- tion check) If KEY check has not completed (If SIRCS key code is received during KEY check) If JOG and LED check has not completed (If JOG dial is pressed without rotating JOG dial even once during JOG and LED check) If KEYBOARD check has not completed (If JOG dial is pressed during a signal recep- tion from keyboard) “SIRCS NG” “KEY NG” “JOG LED NG” “KEYBOARD NG” Each error is displayed at the fixed position of the FL tube (not left aligned), and the items that have completed are blank. Note: The alphabets mentioned above denote the following checks. S : SIRCS reception check KY : KEY check J : JOG and LED check KB : KEYBOARD check NG : There are error items. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 41 DVP-CX777ES a f h g e r p n s c col m d Dp j k b 16G P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 ANODE CONNECTION ( 15G~1G ) ( 5G,3G ) ( 15G,14G,12G~2G ) 12G VCD DVD SACD CD MP3 AUDIO VIDEO ALL DISCS SHUFFLE PROGRESSIVE REPEAT 1 B A- PGM ; Digital 2G 3G 4G 7G 6G 5G 8G 9G 10G 14G 15G - col col 1G - - - a h j k b f m s g c e n p r d Dp - - a h j k b f m s g c e n p r d Dp - a h j k b f m s g c e n p r d Dp a h j k b f m s g c e n p r d - a h j k b f m s g c e n p r d Dp a h j k b f m s g c e n p r d Dp a h j k b f m s g c e n p r d Dp a h j k b f m s g c e n p r d Dp a h j k b f m s g c e n p r d Dp a h j k b f m s g c e n p r d Dp a h j k b f m s g c e n p r d Dp a h j k b f m s g c e n p r d Dp a h j k b f m s g c e n p r d Dp a h j k b f m s g c e n p r d - Dp a h j k b f m s g c e n p r d - GROUP MULTI TITLE CHAP INDEX ANGLE NTSC DISC HOUR MIN - - - - - - - SEC 11G 12G 13G TRACK GROUP TITLE TRACK CHAP DISC MULTI INDEX ANGLE NTSC HOUR MIN 11G 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G SEC SHUFFLE MP3 REPEAT 1 PGM A- B Digital ; 16G 15G 14G 13G PROGRESSIVE AUDIO VIDEO ALL DISCS CD DVD VCD SACD www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 42 DVP-CX777ES 4-11. TROUBLESHOOTING 4-11-1. Cannot Enter Test Mode You cannot enter the Test mode when either button has been pressed by any reason with the board assembled in the front panel. In this state, the power does not turn on even under normal condition (the unit is kept in standby state), and also no button is active and the remote commander is not accepted. To check this state, you can enter forcibly the IF CON self-diagnosis mode by turning on the AC power with the SELF_CHECK (pin oj) of the IF CON (IC1003) on the PANEL-L board kept “low”. The IF CON (IC1003) checks the SELF CHECK port only after the power on reset (only at AC supply, not in standby state). 4-11-2. Faults in Test Mode (MB board) 1. The test mode menu is not displayed. 1-1. Board visual check Check that the ICs of SYSCON (IC104), ROM (IC106), AVD (IC403), ARP & SERVO (IC301) are working correctly. Check that outside appearance of the ICs is normal. Check that IC pins are not short-circuited. Check that there is no soldering error. Check that outside appearance of the capacitors and resistors is normal. 1-2. Power supply voltage check Check the power voltage of the power connector (CN101). Check the power voltage of SYSCON (IC104). Check the power voltage of ROM (IC106). Check the power voltage of AVD (IC403). Check the power voltage of ARP & SERVO (IC301). If the power voltage has any abnormality t Check that the power supply lines are not shorted. Check that there is no soldering error. If any abnormality cannot be found still t Check that each IC is working normally. 1-3. Clock signal check Measure the clock signal frequency at CPUCK (CL102) of SYSCON (IC104) with an oscilloscope. If the 8.25 MHz signal appears. t Check the machine ac- cording to section 1-3-1 If the 33 MHz signal appears. t Check the machine accord- ing to section 1-3-2. If other frequencies are output. R106 and R107 have defective soldering, X101 crystal os- cillator is defective. If the measurement point is fixed to either “H” or “L”. t Observe XRESET (pin-uh) of SYSCON (IC104) with an oscilloscope. If the measurement point is “L”, check the following items. If the IC has defective soldering, if the IC is short-circuited. If the measurement point is “H”, t Component X101 or SYSCON (IC104) is defective. 1-3-1. When the 8.25 MHz signal appears at CPUCK • Check the XRD, XWRH and CS0X signal. Observe XRD (pin-u;), XWRH (pin-ua), and XROMCS (pin- tk) of SYSCON (IC104) with an oscilloscope. If these pins are fixed to either “L” (0V) or “H” (3.3V), or if these pins stay in the center voltage, check the followings. Check if the signal line does not have the defective solder- ing. Check if the signal line is short-circuited with other signal lines. If you cannot find any problem t SYSCON (IC104) is defective. • HA [0 to 21] signal and HD [0 to 15] signal check Observe HA [0 to 21] (pins- This adjustment is made to satisfy the NTSC standard, and if not adjusted correctly, the brightness will be too large or small. Mode Video level adjustment in test mode Signal Color bars Test point LINE OUT (VIDEO) connector (75 Ω terminated) Instrument Oscilloscope Adjusting element RV601 Specification 1.0 +0.04 Vp-p –0.02 Adjusting method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Adjust the RV601 to attain 1.0 +0.04 Vp-p. –0.02 Fig. 6-1 2. Progressive Video Output Level Adjustment (MB Board) This adjusts progressive video output level. If it is incorrect, cor- rect brightness will not be attained when connected to, for instance, projector. Mode Video level adjustment in test mode Signal Color bars Test point COMPONENT VIDEO OUT (Y) connector (75 Ω terminated) Instrument Oscilloscope Adjusting element RV602 Specification 1.0 +0.04 Vp-p –0.02 Adjusting method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Adjust the RV602 to attain 1.0 +0.04 Vp-p. –0.02 Fig. 6-2 3. Checking S Video Output S-Y Check S-terminal video output. If it is incorrect, pictures will not be displayed correctly in spite of connection to the TV with a S- terminal cable. Mode Video level adjustment in test mode Signal Color bars Test point S VIDEO OUT (S-Y) connector (75 Ω terminated) Instrument Oscilloscope Specification 1.0 ± 0.05 Vp-p Checking method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Confirm that the S-Y level is 1.0 ± 0.05 Vp-p. Fig. 6-3 4. Checking S Video Output S-C This checks whether the S-C satisfies the NTSC standard. If it is not correct, the colors will be to dark or light. Mode Video level adjustment in test mode Signal Color bars Test point S VIDEO OUT (S-C) connector (75 Ω terminated) Instrument Oscilloscope Specification A = 286 ± 30 mVp-p (NTSC) Checking method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Confirm that the S-C burst is “A”. Fig. 6-4 1.0 +0.04 Vp-p –0.02 1.0 +0.04 Vp-p –0.02 1.0 ± 0.05 Vp-p A www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 48 DVP-CX777ES 5. Checking Component Video Output Y This checks component video output Y. If it is incorrect, correct brightness will not be attained when connected to, for instance, projector. Mode Video level adjustment in test mode Signal Color bars Test point COMPONENT VIDEO OUT (Y) connector (75 Ω terminated) Instrument Oscilloscope Specification 1.0 ± 0.05 Vp-p Checking method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Confirm that the Y level is 1.0 ± 0.05 Vp-p. Fig. 6-5 6. Checking Component Video Output B-Y This checks component video output B-Y. If it is incorrect, correct colors will not be displayed when connected to, for instance, pro- jector. Mode Video level adjustment in test mode Signal Color bars Test point COMPONENT VIDEO OUT (PB/CB) connector (75 Ω terminated) Instrument Oscilloscope Specification A = 646 ± 50 mVp-p Checking method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Confirm that the B-Y level is A. Fig. 6-6 7. Checking Component Video Output R-Y This checks component video output R-Y. If it is incorrect, correct colors will not be displayed when connected to, for instance, pro- jector. Mode Video level adjustment in test mode Signal Color bars Test point COMPONENT VIDEO OUT (PR/CR) connector (75 Ω terminated) Instrument Oscilloscope Specification B = 646 ± 50 mVp-p Checking method: 1) In the test mode initial menu “6” Video Level Adjustment, set so that color bars are generated. 2) Confirm that the R-Y level is B. Fig. 6-7 1.0 ± 0.05 Vp-p A B www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 49 49 6-4. DISC DETECT SENSOR ADJUSTMENT Be sure to perform this adjustment after sensor adjustment in ME- CHANICAL ADJUSTMENT. Connection: Waveform: 1. Connect the oscilloscope to Pins 1, 2 and 3 of CN701 of the MB board. 2. Check that no discs are loaded in the unit. 3. Perform from step 1 to step 5 in Pop Up Mechanism Adjust- ment. 4. Press the [PAUSE] key, then the T.table starts to rotate in the clockwise direction. 5. Rotate RV101 of MB board and adjust so that the H portion A of DSENS_OUT waveform is twice the width of the H portion B of HH_OUT waveform. Adjustment Location: MB board 6. Loosen the fixing screw, move the mounting board (SENSOR), and secure the mounting board (SENSOR) at the point the H portion of the HH_OUT waveform comes the center of the H portion of the DSENS_OUT waveform. DSENS_OUT: Pin 3 GND: Pin 2 HH_OUT: Pin 1 oscilloscope CH1 CH2 DSENS_OUT GND HH_OUT MB board CN701 DSENS_OUT HH_OUT CH1 CH2 DSENS_OUT HH_OUT CH1 CH2 A A = 2 × B B S tight, screw (PTTWH 3 × 6) D. sens (out) board DSENS_OUT HH_OUT CH1 CH2 Should be at the center Adjustment Location: IC604 CN701 + + RV602 Progressive Video Output Level Adjustment RV101 Disc Detect Sensor Adjustment RV601 Video Level Adjustment + 13 1 CN201 1 3 – MB Board (Component Side) – – POWER Board (Conductor Side) – w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 50 50 DVD/CD PHOTO DETECTOR IC 1 2 7 8 9 10 11 12 13 14 15 16 64 63 55 54 56 57 61 62 RFIP RFIN A2 B2 C2 D2 E F A B C D CDLD PD DVDLD VC TDIKT SVC VC ATOP ATON FNP FNN AIP AIN DIP DIN 59 45 46 47 CD/DVD/SACD RF AMP, FOCUS/TRACKING ERROR AMP IC201 OPTICAL PICK-UP BLOCK (KHM-290AAA) (1/2) OPTICAL DEVICE (1/2) 26 22 25 AUTOMATIC POWER CONTROL (FOR DVD) Q201 AUTOMATIC POWER CONTROL (FOR CD) Q202 DVD/CD LASER DIODE MODULE DIGITAL SIGNAL PROCESSOR IC301 (1/2) RF A B C D F E CD LD PD SW DVD LD SIGO 33 MIRR SRD SWD SCLK • SIGNAL PATH : CD PLAY : DVD PLAY : SACD PLAY 111 RFIN1 113 RFIN2 126 ADC2 158 GIO5/PGIN 147 DFCTI 165 GIO11/TMC2 48 SDEN PGSELO 21 GAIN SWITCH LDSELO 24 19 41 42 TE FE 131 ADC7 125 ADC1 124 ADC0 44 MON 40 TZIN SYSTEM CONTROLLER IC104 (1/5) 82 XLDON 67 XWAIT 17 XARPINT 62 XARPCS 169 DATA/EMU1 CDLRCK/TDOKT CDDOUT 56 DOUT 26 XINT 87 PLCKO 27 XCS 28 XWAT 61 XRESET 171 TRST 173 TDI 24 XWR 25 XRD XWRH XRD XFRRST XRST 36 PI 152 TZC 37 TZC 17 SIGDETB 18 INTR 27 LDONB 39 VCI 148 MIRR 159 GIO6/SDI 161 GIO7/SDO 162 GIO8/SCK 167 GIO13 38 DFT 35 PII 26 ACH56O 28 LRCKO 29 BCKO 97 TDI 77 DSPACK1 76 DSPACK0 95 D1CLK0 24 ACH12O 25 ACH34O 170 BCLK/EMU0 175 LRCK/TDO 57 SDCK 47 ICLKI 58 XSHD 59 XSRQ 63 XSAK 64 SDEF SDCK SDCK XSHD XSRQ XSAK SDEF AV DECODER IC403 32 CDIN1I 34 CDBCKI 27MAVD 35 CDLRKI 200 HWAITON XRD 196 HCSN XWRH 197 HRWN XRST 207 RSTN XFRRST XAVDIT DACK0 DREQ0 DACK1 DREQ1 102 TRST 199 HIRQON 202 DMACK1IN 203 DMARQ1ON 204 DMACK0IN XAVDCS3 167 HAD22I XAVDCS2 166 HAD23I 205 DMARQ0ON XAVDIT DACK0 DREQ0 DACK1 DREQ1 16 XAVDECINT 47 AVDDACK0 46 AVDDREQ0 50 AVDACK1 XAVDCS3 61 XAVCS1 XAVDCS2 60 XAVCS0 49 AVDREQ1 158 CLKI 160 SCLKIN 31 CDIN2I SD0 – SD7 81 48/44.1K D (Page 52) RF+ A (Page 52) PCLK E (Page 52) SDCK, XSHD, XSRQ, XSAK, SDEF ACH12, ACH34, ACH56 F (Page 52) H (Page 52) 27MCLK K (Page 53) P (Page 51) Q (Page 51) XRST, XFRRST R (Page 51) 27M38, 512FS, 33MSA, 512FS38 O (Page 52) C (Page 52) VIDEO DATA BUS AV DATA BUS G (Page 53) CLOCK GENERATOR IC103 14 7 FSEL XTI 8 XTO X102 27MHz ACH34 ACH56 ACH12 BCK, LRCK I (Page 52) BCK LRCK 38ACK0, 38ACK1, TDO38 J (Page 52) 38ACK1 TDO38 38ACK0 49 ISTARTIN 51 IREQON 50 IVALIN 48 IERRIN XSHD XSRQ XSAK SDEF SDI0 – SDI7 DVD0 – DVD7 L (Page 51) HD0 – HD15, HA0 – HA21 B (Page 52) : VIDEO : DIGITAL OUT : AUDIO 77 – 84 DATA & ADDRESS BUS DATA & ADDRESS BUS DATA & ADDRESS BUS HD8 – HD15 HA0 – HA7 HD0 – HD15 HA0 – HA21 D0 – D7 134 – 141 A0 – A7 2 – 9 DT01 – DT7I 37 – 40, 42 – 45 DV00 – DV07 84 – 87, 89 – 92 14 DQML 133 SDDQM0O 15 WE 130 SDWEON 16 CAS 129 SDCASON 125 SDRASON 16Mbit SD-RAM IC404 16Mbit SD-RAM IC405 •IC405 is omitted due to same as IC404. SDDQ0 ı SDDQ15 DQ0 – DQ15 A0 – A11 SDAD0O ı SDAD11O 35 CLK 127 SDCLKO 34 CKE 124 SDCKEO 122 SDCS0ON 121 SDCS1ON 36 DQMU 132 SDDQM1O 17 RAS 18 CS 18 CS 105 – 108, 110 – 113, 115, 116, 118, 120 19 – 24, 27 – 32 135 – 138, 140 – 143, 145 – 148, 150, 151, 153, 154 2, 3, 5, 6, 8, 9, 11, 12, 39, 40, 42, 43, 45, 46, 48, 49 HDATA0 ı HDATA15 2 – 5, 7 – 10, 12 – 15, 17 – 20 HAD0I ı HAD21I 168, 169, 171 – 174, 176 – 179, 181 – 184, 186 – 189, 191 – 194 XRD, XWRH S (Page 54) 3 27-1OUT 4 27-2OUT 9 512-2OUT 10 512-1OUT 13 33-2OUT 15 33-1OUT 27M38 512FS 33MSA 27MAVD 512FSAVD 512FS38 33MARP 150 CLKIN 33MARP 512FSAVD 22 ACLWK 17 WE 29 XMWR 18 RAS 31 XRAS 34 UCAS 30 XCAS 16Mbit D-RAM IC303 MD0 – MD15 I/O0 – I/O15 A0 – A9 MA0 – MA9 35 LCAS 65 – 74 21 – 24, 27 – 32 36 – 43, 46 – 53 2 – 5, 7 – 10, 41 – 44, 46 – 49 SECTION 7 DIAGRAMS 7-1. BLOCK DIAGRAM – RF Section – w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 51 51 FOCUS COIL TRACKING COIL INLIMIT SENSOR 37 48 36 1 19 FOCUS COIL DRIVE 35 3 34 4 TRACKING COIL DRIVE 32 31 20 22 15 17 SLED MOTOR DRIVE FOCUS/TRACKING COIL DRIVE, SPINDLE/SLED MOTOR DRIVE IC202 27 28 SPINDLE MOTOR DRIVE M M1 (SPINDLE) 47 46 45 PDM2 PDM3 PDM0 PDM1 DIGITAL SERVO PROCESSOR IC301 (2/2) FCS+ +3.3V FCS– TRK+ TRK– LIMIT SW C SPM+ SPM– SLA+ SLA– SLB+ SLB– 30 29 SLED MOTOR DRIVE M M2 (SLED) 40 43 42 13 7 10 MDSO 32 MDPO 33 XDRVMUTE 48 XSDSPINT 18 XSDSPCS 63 11 HINT 12 HCS 34 XRST 41 TRST 18 XWR 19 XRD XWRH XRD 28 OE 11 WE 26 CE XFRRST XRST 129 130 ADC5 ADC6 154 GIO1/INT3 143 PWM0 144 PWM1 155 GIO2/INT4 153 GIO0/INT2 VREF TSD-M TABLE POSITION SENSOR1 IC81 BUFFER IC703 MECHANISM CONTROLLER IC701 SVC P (Page 50) XWRH XRD XWRH XRD XWRH XRD XRD 70 XWRH 71 XROMCS 58 XRAMCS 59 XWRL 72 XSRWE 84 57 XADYCS XADYCS U (Page 52) T (Page 54) 79 TDO TDIKT Q (Page 50) XRST, XFRRST SYSTEM CONTROLLER IC104 (2/5) 17 XGAIT 20 XGACS TSENS4 26 TSENS3 30 TSENS2 25 TSENS1 31 DR_CLS 39 DR_OP 38 POPDOWN 37 POPUP 36 DIMMO 74 LOCK 29 LD_OUT 28 LD_IN 27 65 XGACS 19 XGAINT 12 DISC_AD OPTICAL PICK-UP BLOCK (KHM-290AAA) (2/2) OPTICAL DEVICE (2/2) DISC DETECT SENSOR D81, Q81 D801 (ILLUMINATION) LED DRIVE Q701 DISC DETECT SENSOR RV101 S622 (LOCK) 20 22 PS 39 21 5 + – 127 ADC3 128 ADC4 DATA & ADDRESS BUS 40 GND 55 NFTEST 41 R/B 46 NFBUSY 42 XRE 53 NFRE 43 XCE 48 NFCE 2 CLE 49 NFCLE 3 ALE 50 NFALE 4 XWE 54 NFWE 5 XWP 51 NFWP NAND FLASH MEMORY IC702 32Mbit FLASH MEMORY IC106 3 DRO 72 DRM– 4 DRI 71 DRM+ 6 LDI 70 LDM– 8 LDOUT 2 DOOR OUT 7 LDO 69 LDM+ LOADING/DOOR MOTOR DRIVEIC961 M602 (LOADING) I/O0 – I/O7 18 – 21, 24 – 27 HDI0 – HDI15 HAI0 – HAI21 HDI0 – HDI15 HAI1 – HAI21 1 – 5, 102 – 109, 111 – 118, 120 L (Page 50) HD0 – HD15, HA0 – HA21 R (Page 50) XRD, XWRH DATA & ADDRESS BUS DATA & ADDRESS BUS HD8 – HD15 HD8 – HD15 HA0 – HA4, HA19 HD8 – HD15 1, 3 – 9 HA0 – HA4, HA19 10, 11, 13 – 16 HD0 – HD15 HA0 – HA21 85 – 100 DQ0 – DQ15 29 – 36, 38 – 45 A0 – A20 1 – 10, 16 – 25, 48 TABLE POSITION SENSOR2 IC82 TABLE POSITION SENSOR3 IC83 TABLE POSITION SENSOR4 IC84 S612 (POP) M M603 (DOOR) M 4 IN1+ 78 TRM+ 2 OUT1 8 OUT2 6 IN2+ 77 TRM– TABLE MOTOR DRIVE IC941 M601 (TABLE) M TABLE MOTOR DRIVE SWITCH Q001, 941, 942 TABLE MOTOR DRIVE SWITCH Q002, 951, 952 41 OE 40 UB 39 LB 1Mbit S-RAM IC108 HD0 – HD15 HA1 – HA16 I/O0 – I/O15 7 – 10, 13 – 16, 29 – 32, 35 – 38 A0 – A15 1 – 5, 18 – 21, 24 – 27, 42 – 44 6 CS 17 WE UP DOWN S611 (DOOR) OPEN CLOSE S621 (LOADING) IN OUT 24 CPUCK 77 CPUCK 7-2. BLOCK DIAGRAM – SERVO/CHANGER Section – w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 52 52 7-3. BLOCK DIAGRAM – AUDIO Section – : SACD PLAY AUDIO DIGITAL SIGNAL PROCESSOR IC501 C CDDOUT (Page 50) RF+ PCLK 164 XSRQ 167 XSAK 166 SDCK 165 XSHD 27 TDI XSRQ SDCK, XSHD, XSRQ, XSAK, SDEF XSAK SDCK XSHD 168 SDEF SDEF 64 DSAL 83 DLI 10 DSP1DII 123 WCK 126 WARFI 32 DSP2DII DSD DECODER IC905 16Mbit SD-RAM IC903 D/A CONVERTER IC502 OPTICAL TRANSCEIVER IC206 MIX AMP IC205 MIX AMP IC204 DIGITAL OUT PCM/DIS/ DOLBY DIGITAL DIGITAL AUDO PROCESSOR IC801 RF BUFFER IC906 SD0 – SD7 169 – 176 143 XWE 15 WE 145 XRAS 17 RAS 144 XCAS 16 CAS 142 DCKE 34 CKE 35 CLK DQ0 – DQ7 141 DCLK 66 DSAR 84 DRI 69 DSAC 85 DCI 71 DSASW 86 DLFEI 74 DSALS 87 DLSI 76 DSARS 88 DRSI 55 DSADML 77 DMLI 56 DSADMR 78 DMRI 38 DLO 25 DSDL1 37 DRO 26 DSDR1 35 DCO 29 DSDL3 34 DLEFEO 30 DSDR3 32 DLSO 27 DSDL2 31 DRSO 28 DSDR2 22 DCLK 41 DMLO 23 DSDL4 40 DMRO 24 DSDR4 47 FLFRO 14 SDTI1 46 SLSRO 15 SDTI2 45 CSWO 16 SDTI3 44 DLDRO 13 SDTI4 49 SPDIFO 29 TDO 54 TDI 140 TDI 55 TDO 43 DSP2BCKO 60 BCKI 45 DSP2DO 57 SPDIFI 48 DSP2CH12O 66 FLFRI 49 DSP2CH34O 65 SLSRI 50 DSP2CH56O 64 CSWI 51 DSP2CH78O 63 DLDRI 42 DSP2LRCKO 59 LRCKI 62 PHREFO 80 PHAI 60 BCKAO 81 BCKAI 38 LOUT4+ 37 3 1 2 LOUT4– 33 ROUT4+ 32 ROUT4– AV DATA BUS SDI0 – SDI7 CDLRCK/TDOKT A-MUTE B (Page 50) D (Page 50) F (Page 50) 11 MCKI 33MSA XFRRST 31 TRST XSACS 2 XMSLAT SC1 3 MSCK SO1 4 MSDATI SI1 6 MSDATO XSARDY 7 MSREADY XSARST 9 XRST SMUTE 10 SMUTE E (Page 50) A (Page 50) 159 DSP1CH34I 57 DSP2CH34I 160 DSP1CH12I 56 DSP2CH12I ACH34 ACH12, ACH34, ACH56 ACH12 158 DSP1CH56I ACH56 58 DSP2CH56I H (Page 50) 4 DSP1ACKO0 139 TDO 38ACK1 38ACK0, 38ACK1, TDO38 38ACK0 3 DSP1ACKO1 TDO38 J (Page 50) BCK, LRCK BCK LRCK I (Page 50) XADYCS U (Page 51) 27M38, 33MSA O (Page 50) XRST, XFRRST V (Page 54) W (Page 54) 73 XCS 9 BICK 17 LRCK BCKA LRCKA 8 PDN XRST 21 CSN/CAD1 XDACS 20 CDTI/SDA SO1 19 CCLK/SCL SC1R TMS TCK BCKA LRCKA 6 RESET IN XRST 22 SCLKI 27M38 70 XRST 51 TRST XRST XFRRST 74 SI 75 SO SO1 SI1 72 SCLK SC1R 147 DSP1BCKI 69 DSP2BCKI 161 DSP1LRCKI 55 DSP2LRCKI XFRRST 142 RST 119 SH_SOO SI1 X38IT 107 CMD_ACKNO SO1 117 SH_SII SC1R 115 SH_CLKI X38CS 118 SH_CSNI • SIGNAL PATH : DIGITAL OUT : AUDIO DQ0 – DQ7 131 – 134, 136 – 139 A0 – A11 148, 149, 151, 152, 154 – 157, 159 – 162 2, 3, 5, 6, 8, 9, 11, 12 A0 – A11 19 – 24, 27 – 32 16Mbit SD-RAM IC802 10 WE 15 WE 12 RAS 17 RAS 11 CAS 16 CAS 15 CKE 34 CKE 35 CLK DQ0 – DQ15 14 CLK 13 CS 18 CS D0 – D15 1 – 5, 7, 8, 90 – 95, 97, 98, 100 A0 – A11 17 – 22, 24 – 29 2, 3, 5, 6, 8, 9, 11, 12, 39 , 40, 42, 43, 45, 46, 48, 49 A0 – A11 19 – 24, 27 – 32 COAXIAL J301 LINE OUT AUDIO J104 L OPTICAL WAVE SHAPER Q221 MUTING Q220 MUTING Q219 + – 5 7 6 + – R 1 L R 2 2 LOUT1+ 1 3 1 2 LOUT1– 48 ROUT1+ 47 ROUT1– FRONT L 5.1CH OUT J201 MUTING Q218 MUTING Q217 + – 5 7 6 + – R 5.1CH OUT J202 MIX AMP IC203 46 LOUT2+ 45 3 1 2 LOUT2– 44 ROUT2+ 43 ROUT2– MUTING Q216 MUTING Q215 + – 5 7 6 + – REAR L R MIX AMP IC202 42 LOUT3+ 41 3 1 2 LOUT3– 40 ROUT3+ 39 ROUT3– 5 DZF23 D503 MUTING Q214 MUTING Q213 + – 5 7 6 + – CENTER WOOFER D201 MUTE3.3V +12V ES 4 DZFR1 D502 3 DZFL1 D501 83 MAMUTE SYSTEM CONTROLLER IC104 (3/5) XSACS 8 XSACS SC1 30 SCK1 SC1R SO1 29 SOUT1 SI1 28 SIN1 XSARDY 23 XSARDY XSARST 40 XSARST SMUTE 78 SMUTE X38CS 80 XADSPCS X38IT 21 XADSPINT0 XDACS 79 XDACS 512FS38 149 DSP1ACKI 67 DSP2ACKI 10 MCLK 68 CLK512 512FS MUTING CONTROL SWITCH Q204, 207, 210 MUTING CONTROL SWITCH Q205, 208, 211 MUTING CONTROL SWITCH Q206, 209, 212 w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 53 53 7-4. BLOCK DIAGRAM – VIDEO Section – INTERLACE/PROGRESSIVE CONVERTER IC602 D/A CONVERTER IC604 VIDEO AMP IC102 SYSTEM CONTROLLER IC104 (4/5) 15 IPSW 36 WIDE 44 V 33 VIDEO OUT 24 Y OUT 22 CB OUT 20 CR OUT Y OUT C OUT 40 CLKO 47 RSET1 3 VIDEO IN YO0 – YO9 X (Page 54) V-MUTE Y (Page 54) 43 Y 8 Y IN 42 C 6 C IN 39 Y/G 12 Y IN 38 CB/R 15 CB IN 37 CR/B 17 CR IN 7 MUTE1 16 MUTE2 41 – 45, 48 – 52 CO0 – CO9 56 – 60, 63 – 67 PO2 – PO9 22 – 25, 28 – 31 2 – 9, 12, 13 14 – 18, 26 – 30 53 – 55, 58 –62 P Y (0) – P Y (9) P C (0) – P C (9) S (2) – S (9) 15 WE 104 WE 16 CAS 102 CAS 100 RAS 16Mbit SD-RAM IC603 MD0 – MD15 DQ0 – DQ15 A0 – A11 MA0 – MA11 35 CLK 103 MCLK 17 RAS 80 – 83, 86 – 89, 94 – 97 19 – 24, 27 – 32 110 – 113, 116 – 119, 122 – 125, 129 – 132 2, 3, 5, 6, 8, 9, 11, 12, 39, 40, 42, 43, 45, 46, 48, 49 XRST PI2 – PI9 VIDEO DATA BUS DVD0 – DVD7 G (Page 50) 2 CLKI 32 CLKIN 63 CLKIN 2 4 PLL EN 33 RESETB 22 SCL 21 SDA SCL SDA 136 SCL 135 SDA SCL SDA SCL SDA 137 SRN 27MCLK K (Page 50) 7 – 14 • SIGNAL PATH : VIDEO : Y : CHROMA : COMPONENT VIDEO VIDEO LEVEL RV601 35 RSET2 PROGRESSIVE VIDEO OUTPUT LEVEL RV602 J102 S101 1 2 3 4 5 6 7 8 COMPONENT VIDEO OUT Y PR/CR PB/CB SELECTABLE SCAN SELECT LINE OUT VIDEO J103 1 2 S VIDEO OUT J101 1 2 29 31 WIDE ON/OFF SWITCH Q104, 105 +5V INTERLACE PROGRESSIVE SDA 5 SCL 6 WP 7 38 SDA 7 SCL 39 WP EEPROM IC101 w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 54 54 REGULATOR CONTROL SWITCH IC303, Q313 39 16G 56 FLDSDATA 57 FLDSCLK 62 FLDCS 61 FLDRST INTERFACE CONTROLLER IC1003 FLUORESCENT INDICATOR TUBE DRIVER IC1007 70 DA 69 CP 68 CS 95 PON_CHECK 55 VIDEO_OFF 70 P_CONT 67 RESET 65 OSCO 66 OSCI C8036, R1067 FL1001 FLUORESCENT INDICATOR TUBE A-MUTE W (Page 52) 25 SYSCONSOUT 24 SYSCONSIN 26 SYSCONSCLK 3 – 20 P1 – P18 1G – 15G P1 – P18 1G – 15G 40 – 54 25 – 42 6 – 20 LED0 – LED6 73 – 77, 89, 90 OSC LED DRIVE Q1011 – 1017 D1101, 1102, D1011 – 1015 V-MUTE Y (Page 53) 31 SIRCS KEY INPUT DETECT IC1008, 1009 RESET SIGNAL GENERATOR IC1006 RS-232C DRIVE/RECEIVER IC804 IC1005 REMOTE CONTROL RECEIVER IC1004 KEYBOARD DISC AMS PUSH ENTER 1, 2, 98 – 100 KEY0 – KEY4 KEY0 , KEY1 93 SIRCS_MODE 69 VMUTE 68 AMUTE 14 15 X1001 5MHz X1 X2 58 KBCIN J821 RS232C CNP801 S-LINK CONTROL S IN J801 JG1101 59 KBDIN 32 CONTROL_S 27 232COUT 28 232CIN 21 232C_INT 8 9 66 KBCOUT 67 KBDOUT JOG-A JOG-B 20 KEY_INT 16 RESET KEY4 KEY3 XRST XRST, XFRRST (for AUDIO SYSTEM) XFRRST XRST X (Page 53) V (Page 52) LEVEL SHIFT Q1001, 1002 f F g G RE1101 (ROTALY ENCODER) S1001 – 1009, S1101 – 1112 + – SIRCS BUFFER Q1005, 1006 GRID DRIVE Q1071 S801 COMMAND MODE 21 16G SYSTEM CONTROLLER IC104 (5/5) 35 XRSTO 25 IFSI 27 IFSO 26 IFSC 33 SYSCONBUSY 20 XIFINT 23 SYSCONCS 51 XIFCS 34 SYSCONRST 76 XRESET 54 53 X101 16.5MHz X0 X1 XRST, XFRRST (for CHANGER SYSTEM) T (Page 51) XRST, XFRRST (for RF SYSTEM) S (Page 50) D307 D307 D102 D101 D302 – 304 +3.3V REGULATOR IC401 B+ SWITCH Q201, 202 (AC IN) F101 T101 MAIN POWER TRANSFORMER T102 SUB POWER TRANSFORMER SW+11V –5V ES RECT D101 – 104 LINE FILTER L101 SWITCHING IC101 LINE FILTER L102 RECT D211 +B ISOLATOR PC101 SHUNT REGULATOR IC301 RECT D301 – 304 B– SWITCH Q501, 502 SW–11V RECT D501 P501 B+ SWITCH Q301, 302 RECT D301, 305 B– SWITCH Q301, 302 VIDEO ON/OFF SWITCH Q307, 309 B+ SWITCH Q308, 310 P301 VR301 RECT D502 EVER+5V MUTE3.3V EVER+3.3V EVER+3.3V SW+5V SW+3.3V +3.3V REGULATOR IC302 P502 PS302 +3.3V REGULATOR IC102 +3.3V +3.3V REGULATOR IC302 +3.3V +3.3V REGULATOR IC803 A+3.3V +1.8V REGULATOR IC301 +1.8V +1.8V REGULATOR IC401 +1.8V REGULATOR CONTROL SWITCH IC302, Q311 +5V REGULATOR IC201 A+5V +2.5V REGULATOR IC605 +2.5V +2.5V REGULATOR IC901 +2.5V +2.5V REGULATOR IC601 +2.5V REGULATOR Q931 –5V REGULATOR Q303 F1 F2 VDISP–30V TO FLUORESCENT INDICATOR TUBE T1081 DC/DC CONVERTER RECT D1081 – 1084 –30V REGULATOR Q1083 OSC Q1081,1082 +5V ES +5V REGULATOR Q305 –12V ES –12V REGULATOR Q304 +12V ES +12V REGULATOR Q306 RL101 1 2 3 PUSH ENTER 7-5. BLOCK DIAGRAM – PANEL/POWER SUPPLY Section – w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 55 DVP-CX777ES 7-6. NOTE FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS Note on Printed Wiring Board: • X : parts extracted from the component side. • Y : parts extracted from the conductor side. • f : internal component. • : Pattern from the side which enables seeing. (The other layers' patterns are not indicated.) Caution: Pattern face side: Parts on the pattern face side seen from (Conductor Side) the pattern face are indicated. Parts face side: Parts on the parts face side seen from (Component Side) the parts face are indicated. C B These are omitted. E Q Note on Schematic Diagram: • All capacitors are in µF unless otherwise noted. pF: µµF 50 WV or less are not indicated except for electrolytics and tantalums. • All resistors are in Ω and 1/4 W or less unless otherwise specified. • f : internal component. • 2 : nonflammable resistor. • C : panel designation. • A : B+ Line. • B : B– Line. • H : adjustment for repair. • Voltages and waveforms are dc with respect to ground under no-signal conditions. no mark : DVD PLAY ( ) : SACD PLAY [ ] : CD PLAY ∗ : Impossible to measure • Voltages are taken with a VOM (Input impedance 10 MΩ). Voltage variations may be noted due to normal produc- tion tolerances. • Waveforms are taken with a oscilloscope. Voltage variations may be noted due to normal produc- tion tolerances. • Circled numbers refer to waveforms. • Signal path. J : CD PLAY c : DVD PLAY I : SACD PLAY F : AUDIO L : VIDEO g : DIGITAL OUT E : Y a : CHROMA p : COMPONENT VIDEO Note: The components identi- fied by mark 0 or dotted line with mark 0 are criti- cal for safety. Replace only with part number specified. Note: Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. • MB board is multi-layer board. However, the patterns of intermediate-layer not been included in diagram. • Indication of transistor www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 56 DVP-CX777ES • Circuit Boards Location LED board DOOR MOTOR board DRIVER board DOOR SW board SENSOR board D. SENS OUT board D. SENS IN board LOADING SW board LOCK SW board POWER block AV board RS-232C board MB board PANEL-L board PANEL-R board KEY board LOADING MOTOR board www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 57 57 7-7. SCHEMATIC DIAGRAM – MB Board (1/15) – • See page 94 for Waveform. FL106 RB102 R124 R123 C115 C120 R160 R198 R197 C121 C102 C109 R105 X101 R107 R106 IC101 R102 C108 R115 R114 R113 R112 R199 R118 R117 R193 R190 R176 R189 R188 R177 R178 R179 R180 R175 R195 R196 R163 R187 R183 R181 R182 R111 R125 R133 C113 C122 C118 FL102 R150 D101 R166 R173 C132 R191 R151 FB127 IC104 R159 10k 3300 3300 0.01 0.01 100 100 100 0.01 0.01 100 4V 0 16.5MHz 22k 1k BR24C04F-WE2 10k 0.01 1k 1k 100k 100k 100 10k 10k 100 100 100 100 100 100 100 100 100 0 100 100 100 100 100 22 22 1k 10k 10k 0.01 0.01 0.047 3300 1SS367 3300 4700 0.022 47 100 MB91307RPFV-G -BND-E1 10k A1 A2 A3 A4 A5 A6 A7 B1 B2 B3 GND XSACS XAVDIT XARPIT XSDPIT X38IT SI1 SO1 XRST DREQ0 DREQ1 DACK1 DACK0 XDRVMUTE XAVDCS2 XAVDCS3 XARPCS XSDPCS XKATWT XGAIT SDA SCL XGACS XDACS X38CS SMUTE XLDON MA_MUTE XSARDY WIDE XSARST IPSW +1.8V +3.3V SC1 SC1R +3.3V GND +3.3V GND +3.3V GND +3.3V GND +3.3V GND +3.3V GND +3.3V GND +3.3V GND XFRRST XFRRST XFRRST XFRRST GND XRD XWRH SI1 SO1 XRST XFRRST XRST XRST XRST XAVWAIT XRD XWRH XRST XRD XWRH XFRRST SC1R SI1 SO1 XRST GND +1.8V +3.3V +1.8V GND +3.3V +1.8V GND CPUCK HAI17 HAI18 HAI19 HAI20 HAI21 SI0 SI2 SO0 SO2 SC0 DSENS HDI15 HDI14 HDI13 HDI12 HDI11 HDI10 HDI9 HDI8 HDI7 HDI6 HDI5 HDI4 HDI3 HDI2 HDI1 HDI0 HAI16 HAI15 HAI14 HAI13 HAI12 HAI11 HAI10 HAI9 HAI8 HAI7 HAI6 HAI5 HAI4 HAI3 HAI2 HAI1 HAI0 OE CE LB CS UB WE XIFBUSY XIFCS ZZ1 ZZ2 ZZ3 ZZ4 ZZ5 ZZ6 ZZ7 ZZ9 ZZ10 ZZ11 ZZ12 ZZ1 ZZ2 ZZ3 ZZ4 ZZ5 ZZ6 ZZ7 ZZ9 ZZ10 ZZ11 ZZ12 ZZ14 ZZ15 ZZ16 ZZ17 ZZ18 ZZ19 ZZ20 ZZ21 ZZ22 ZZ23 ZZ24 ZZ14 ZZ15 ZZ16 ZZ17 ZZ18 ZZ19 ZZ20 ZZ21 ZZ22 ZZ23 ZZ24 ZZ25 ZZ26 ZZ27 ZZ28 ZZ29 ZZ31 ZZ32 ZZ33 ZZ34 ZZ35 ZZ25 ZZ26 ZZ27 ZZ28 ZZ29 ZZ31 ZZ32 ZZ33 ZZ34 ZZ35 ZZ36 ZZ37 ZZ38 XFRRST ZZ36 ZZ37 ZZ10 ZZ11 ZZ14 ZZ38 ZZ14 ZZ14 ZZ29 ZZ36 ZZ37 ZZ14 ZZ36 ZZ37 ZZ38 ZZ10 ZZ11 ZZ14 ZZ30 ZZ30 A0 A1 A2 GND SDA SCL WP VCC (1/15) EEPROM SYSTEM CONTROLLER (Page 66) (Page 71) (Page 62) (Page 69) (Page 71) (Page 67) (Page 68) (Page 63) (Page 63) (Page 70) (Page 65) (Page 62) (Page 66) (Page 61) (Page 60) (Page 59) (Page 63) (Page 65) (Page 59) (Page 60) (Page 61) (Page 62) (Page 64) (Page 67) (Page 68) (Page 69) (Page 70) (Page 58) (Page 62) (Page 63) (Page 65) (Page 69) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 58 58 7-8. SCHEMATIC DIAGRAM – MB Board (2/15) – IC106 RV101 CN107 CN106 R152 R165 R172 R138 R148 R101 RB109 RB108 RB107 RB106 RB105 RB104 RB103 CN104 R157 R168 R167 R154 CN102 CN103 FL105 FL109 Q001 Q002 C130 RB110 RB111 CN105 R171 C128 IC108 R170 FB112 MBM29DL324BE90TN -E11572 22k 10P 8P 10k 10k 1k 100 100 3.3k 100 100 100 100 100 100 100 6P 100 0 100 100 19P 6P DTA144EKA -T146 DTA144EKA -T146 0.01 100 100 9P 10k 0.01 IDT71V016SA15PH8 (SCD2994) A1 A2 A3 A4 A5 A6 A7 HA0 HA1 HA2 HA3 HA8 HA9 HA10 HA11 HA12 HA13 HA14 HA15 HA16 HA17 HA18 HA19 HA20 HA21 HD0 HD1 HD2 HD3 HD4 HD5 HD6 HD7 RFMON HA4 HA5 HA6 HA7 HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 TSENS4 TSENS3 TSENS2 TSENS1 DR_CLS DR_OP POPDOWN POPUP T_LOCK LD_OUT LD_IN LDM+ LDM- TRM+ TRM- DRM+ DRM- S+5V RX TX SIRCS_MODE SLINK V-OFF V-MUTE A-MUTE DIMM HA19 HA4 HAI1 HAI2 HAI3 HAI4 HAI5 HAI6 HAI7 HAI8 HAI9 HAI10 HAI11 HAI12 HAI13 HAI14 HAI15 HAI16 HAI17 HAI18 HAI19 HAI20 HAI21 HDI0 HDI1 HDI2 HDI3 HDI4 HDI5 HDI6 HDI7 HDI8 HDI9 HDI10 HDI11 HDI12 HDI13 HDI14 HDI15 SO2 SI2 HA5 HA4 HA3 HA2 HA1 HD0 HD1 HD2 HD3 HD4 HD5 HD6 HD7 HA16 HA15 HA13 HA14 HA1 HA2 HA3 HA4 HA5 HA6 HA7 HA8 HA9 HA10 HA11 HA12 HA13 HA14 HA15 HA16 HD0 HD1 HD2 HD3 HD4 HD5 HD6 HD7 HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 HD14 HD13 HD12 HD11 HD10 HD9 HD8 HA6 HA7 HA8 HA9 HA10 HA11 HA12 SC0 SO0 SI0 SI0 SO0 SC0 DSENS HAI0 HAI1 HAI2 HAI3 HAI4 HAI5 HAI6 HAI7 HAI9 HAI10 HAI11 HAI8 HAI12 HAI13 HAI14 HAI15 HAI16 HAI17 HAI18 HAI19 HAI20 HAI21 HDI0 HDI1 HDI2 HDI3 HDI4 HDI5 HDI6 HDI7 HDI8 HDI9 HDI10 HDI11 HDI12 HDI13 HDI14 HDI15 OE UB ~~~ UB CE OE LB CS WE XFRRST XIFBUSY XIFBUSY XFRRST XIFCS XIFCS HD15 TXD RXD GND GND RF MON XIFBUSY XIFCS SI0 SO0 GND SC0 XFRRST GND T_LOCK POPUP POPDOWN DSENS TSENS1 TSENS2 TSENS3 TSENS4 GND XIFBUSY XIFCS SI0 SO0 GND SC0 XFRRST IFRST P-CONT IFRST V-OFF TX RX P-CONT GND GND SIRCS_MODE SLINK V-MUTE A-MUTE S+5V S+5V LED DRM- DRM+ TRM- TRM+ LDM- LDM+ LD_IN LD_OUT DR_OP DR_CLS +3.3V 3.3V_MNT (2/15) 32Mbit FLASH MEMORY 1Mbit S-RAM Q001,002 DRIVE SWITCH TABLE MOTOR PON_CHECK(3.3V_MNT) (NC) (NC) (Page 62) (Page 63) (Page 70) (Page 70) (Page 62) (Page 63) (Page 63) (Page 63) (Page 63) (Page 62) (Page 63) (Page 70) (Page 57) (Page 61) (Page 88) (Page 68) (Page 66) (Page 75) (Page 75) (Page 79) (Page 91) (Page 70) (Page 59) (Page 70) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 59 59 7-9. SCHEMATIC DIAGRAM – MB Board (3/15) – • See page 94 for Waveforms. • See page 98 for IC Block Diagrams. X102 CN101 R108 R109 R103 C103 C127 C126 C125 C124 CL101 IC102 FB111 FB110 FB109 FL107 FB108 FB107 FB106 FB105 FB104 FL103 FL104 FL108 C104 C105 C106 C107 C111 C101 C129 IC103 FB121 FB122 R110 FB124 R120 R142 R185 R184 R144 R141 R146 FB123 R119 FB126 R122 R121 FB125 R147 R129 R194 R192 27MHz 7P 0 47 0 100 4V 220 4V 47 16V 47 4V 100 6.3V (27M) TK11133CSCL-G 0.01 0.01 9p 9p 0.01 0.1 L101 10µH 0.01 SM8707EV-G-E2 0 0 47 0 10 10 0 0 10 10 10 220 100 47 47 10 0 0 B1 B2 B3 27M38 33MSA 27MAVD +11V M_GND +1.8V +5V S+5V S+5V S+5V S+5V S+5V 33MARP 512FS38 512FSAVD 512FSADY 512FS8CH +1.8V SW+5V GND SW+11V(M) GND(M) GND SW+3.3V VOUT VIN CONT GND NOISE 512-2OUT 512-1OUT VSS VDD 33-2OUT FSEL 33-1OUT N.C VSS 27-1OUT 27-2OUT VDD VSS XTI XTO VDD (3/15) +3.3V REGULATOR CLOCK GENERATOR (Page 71) (Page 58) (Page 60) (Page 61) (Page 62) (Page 69) (Page 57) (Page 60) (Page 57) (Page 63) (Page 65) (Page 62) (Page 63) (Page 69) (Page 71) (Page 66) (Page 85) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 60 60 C240 R253 R250 R254 C249 C258 C259 R262 R261 R259 R218 R219 R220 R221 C225 R238 R222 C226 R239 C215 R230 R240 C228 C229 R241 R242 R223 C230 R243 C218 R225 R226 R233 R229 C214 C220 C219 R224 R227 R231 C271 C216 R232 C270 IC202 R255 C246 R269 C272 0.033 56k 100k 100k 0.01 0.01 0.001 330 10k 10k 120k 120k 150k 150k 100p 33k 56k 220p 33k 100p 33k 33k 0.001 0.001 33k 220k 56k 4700p 470k 1500p 10k 470k 470k 10k 0.015 0.1 0.1 270k 120k 680k 47 16V 220p 33k 0.01 FAN8034L 56k 0.033 10k 0.1 C1 C2 C3 M_GND +11V XDRVMUTE SPMUTE TSD SPFG SVC GND FDRV+ FDRV- TDRV- TDRV+ SLE SLDA SLDB MDSO MDPO INLIM S+5V +3.3V FCS+ FCS- TRK+ TRK- SLA+ SLA- SLB+ SLB- SPM- SPM+ INLIM IN1 OUT1 IN2+ IN2- OUT2 IN3+ IN3- OUT3 IN4+ IN4- OUT4 IN5+ IN5- OUT5 CTL FWD REV SGND MUTE12 MUTE34 MUTE5 TSD-M PVCC2 DO6- DO6+ PGND2 DO5- DO5+ DO4- DO4+ DO3- DO3+ PGND1 DO2- DO2+ DO1- DO1+ PVCC1 PS OPOUT2 OPIN2- OPIN2+ VREF SVCC OPOUT1 OPIN1- OPIN1+ IN1+ (4/15) FOCUS/TRACKING COIL DRIVE, SPINDLE/SLED MOTOR DRIVE 7-10. SCHEMATIC DIAGRAM – MB Board (4/15) – (Page 57) (Page 59) (Page 62) (Page 62) (Page 59) (Page 62) (Page 57) (Page 61) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 61 61 7-11. SCHEMATIC DIAGRAM – MB Board (5/15) – • See page 94 for Waveforms. The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. R260 R263 R264 R251 R249 R248 R256 R246 R245 R236 R234 R206 R282 R274 R212 R211 R235 R244 R210 R281 C263 C242 C238 C234 C221 CN203 CN204 Q202 FL201 C245 C260 C253 C255 C256 C257 C261 C254 C248 C247 C251 C252 C244 C241 C264 C266 C265 C262 C243 C201 C202 C232 C233 C236 C210 C211 C212 C213 IC201 R273 R265 C235 Q201 12k 2.2M 100k 47k 33 33 100 100 47k 33 33 4700 0 10k 100 100 100 1k 330 0 10 16V 47 6.3V 10 16V 47 6.3V 10 16V 26P 9P 2SB1132-T100-QR 0.01 0.01 0.001 0.1 0.047 0.047 330p 4700p 0.1 0.01 0.1 0.1 0.1 0.1 0.47 0.1 0.1 0.1 0.01 0.01 0.01 0.1 0.1 220p 2200p 2200p 2200p 2200p SP3726A 0 27k 0.01 L202 47µH L201 47µH 2SB1132-T100-QR C1 C2 C3 GND S+5V +3.3V RFMON RF+ SSCK SSWD SSRD PI TE FE MIRR TZC SSCS SSDFCTI XLDON SS_MON INTR SIGDET RF+ FCS+ FCS- TRK+ TRK- D C B A PI TE FE MIRR TZC SSDFCTI SSRD SSWD SSCK SSCS SSCS SSRD SSWD SSCK PI TE FE MIRR TZC SSDFCTI SLA+ SLB- INLIM SPM- SPM+ CD_LD DVD_LD A D C B E F DVD_LD CD_LD SLA- SLB+ F E FCS+ FCS- TRK+ TRK- N.C SLA+ SLB+ SLB- SLA- SPM- SPM+ PD VR N.C SW GND DVD_LD N.C CD_LD GND E VCC VC GAIN_SWITCH F A D C B RF V.C N.C LIMIT SW A LIMIT SW B LIMIT SW C (5/15) FOCUS/TRACKING ERROR AMP AUTOMATIC POWER CONTROL (FOR CD) AUTOMATIC POWER CONTROL (FOR DVD) CD/DVD/SACD RF AMP, (Page 60) (Page 57) (Page 59) (Page 58) (Page 62) (Page 69) (Page 62) (Page 62) (Page 57) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 62 62 7-12. SCHEMATIC DIAGRAM – MB Board (6/15) – • See page 94 for Waveforms. • See page 98 for IC Block Diagram. C309 R320 R319 C311 R327 C323 C322 C321 C305 C325 C329 C319 R358 C314 R324 R323 C315 C324 C327 R321 C312 R328 R329 R330 R331 C310 R332 R333 R326 C328 R313 R314 R315 R316 R317 R318 C317 C318 C320 C330 R335 R336 IC302 R310 C339 R301 R312 R334 R322 R311 R359 C304 C308 C334 C316 C313 R325 C303 C302 C344 C337 R351 R352 R302 R338 C331 C343 R337 C340 R349 R366 IC301 C326 C333 C332 IC303 C338 R360 C335 0.01 33k 10k 0.01 10k 0.01 0.01 0.01 4700p 0.01 0.01 0.01 10k 0.01 10k 2200 0.01 0.1 0.01 22k 0.068 27k 2200 2200 2200 100p 2200 150k 10k 0.01 470 470 470 4700 10k 470 0.1 4700p 4700p 4700p 4700 10k TK11133CSCL-G 1k 0.01 0 220 1800 1k 100 10k 0.01 100 6.3V 0.01 4700p 0.033 6800 0.1 100 6.3V 0.01 0.01 0 0 0 22 0.1 0.01 10k 0.01 10k 22 CXD9703R 0.01 0.01 0.01 MSM51V18160F -60T47M1 0.01 100 0.01 GND +1.8V GND INLIM SPMUTE TSD SSRD SSWD SSCK SSCS TDIKT TCK TMS XFRRST HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 SLDA SLDB SSDFCTI MIRR TZC CDDATA/EMU1 CDBCK/EMU0 HA0 HA1 HA2 HA3 HA4 HA5 HA6 HA7 XSDPIT XSDPCS XARPCS XARPIT XRD XWRH FDRV- FDRV+ TDRV- TDRV+ XRST SDEF XSAK XSHD SDCK XSRQ CDDOUT PCLK RF+ SS_MON SVC SPFG SLE PI TE FE SDI0 SDI1 SDI2 SDI3 SDI4 SDI5 SDI6 SDI7 S+5V MDPO MDSO CDLRCK/TDOKT CDLRCK/TDOKT XKATWT INTR SIGDET +3.3V +3.3V CDDOUT 33MARP FDRV- FDRV+ TDRV- TDRV+ TDRV+ TDRV- FDRV- FDRV+ SDEF XSAK XSRQ XSHD SDCK CDDOUT SDI0 SDI1 SDI2 SDI3 SDI4 SDI5 SDI6 SDI7 YY1 YY2 YY3 YY4 YY5 YY6 YY7 YY8 YY9 YY10 YY11 YY1 YY2 YY3 YY4 YY5 YY6 YY7 YY8 YY9 YY10 YY11 YY12 YY13 YY14 YY15 YY12 YY13 YY14 YY15 VV2 VV3 VV4 VV5 VV6 VV7 VV1 VV2 VV3 VV4 VV5 VV6 VV7 XFRRST TMS TDIKT TCK CDLRCK/TDOKT TMS TCK TDIKT CDLRCK/TDOKT XFRRST VV1 CDDOUT CDDOUT SDEF XSAK XSHD SDCK XSRQ SDI0 SDI1 SDI2 SDI3 SDI4 SDI5 SDI6 SDI7 RAMD0 RAMD0 RAMD1 RAMD2 RAMD3 RAMD4 RAMD5 RAMD6 RAMD7 RAMD1 RAMD2 RAMD3 RAMD4 RAMD5 RAMD6 RAMD7 RAMA0 RAMA1 RAMA2 RAMA3 RAMA4 RAMA5 RAMA6 RAMA7 RAMA8 RAMA9 RAMD8 RAMD9 RAMD10 RAMD11 RAMD12 RAMD13 RAMD14 RAMD15 RAMD8 RAMD9 RAMD10 RAMD11 RAMD12 RAMD13 RAMD14 RAMD15 RAMA0 RAMA1 RAMA2 RAMA3 RAMA4 RAMA5 RAMA6 RAMA7 RAMA8 RAMA9 VIN VOUT CONT GND NOISE (6/15) DIGITAL SIGNAL PROCESSOR, +3.3V REGULATOR DIGITAL SERVO PROCESSOR 16Mbit D-RAM (Page 59) (Page 69) (Page 57) (Page 61) (Page 58) (Page 61) (Page 60) (Page 63) (Page 57) (Page 70) (Page 59) (Page 69) (Page 63) (Page 69) (Page 63) (Page 69) (Page 65) (Page 57) (Page 57) (Page 60) (Page 58) (Page 58) (Page 61) (Page 60) (Page 63) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 63 63 7-13. SCHEMATIC DIAGRAM – MB Board (7/15) – • See page 98 for IC Block Diagram. FL402 FL403 C431 C432 C433 C436 C437 R414 C417 C423 C424 C427 C408 R407 R434 C410 C411 C413 C414 R402 C420 C419 C418 C416 C426 R419 R418 R416 R426 C401 C407 C405 C404 IC403 R430 C429 IC401 FB401 C430 0.01 0.01 0.01 0.01 0.01 10k 0.01 0.01 0.01 0.01 0.01 100 10 0.01 0.01 0.01 0.01 0 0.1 0.01 0.01 0.01 0.01 10 1200 6800 10k 1 50V 10 16V 10 16V 0.01 CXD1935Q 10k 0.01 TK11118CSCL-G 0 0.01 D1 D2 D3 XSRQ XSAK XSHD SDEF SDCK SDI7 SDI6 SDI5 SDI4 SDI3 SDI2 SDI1 SDI0 CDBCK/EMU0 CDDATA/EMU1 CDDOUT BCK LRCK ACH56 ACH34 ACH12 HD0 HD1 HD2 HD3 HD4 HD5 HD6 HD7 HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 XRD XWRH XAVDIT XAVDWT DACK0 DACK1 DREQ1 DREQ0 XRST HA0 HA1 HA2 HA3 HA4 HA5 HA6 HA7 HA8 HA9 HA10 HA11 HA12 HA13 HA14 HA15 HA16 HA17 HA18 HA19 HA20 HA21 27MAVD XAVDCS2 XAVDCS3 XFRRST TMS TCK TDO38 38ACK1 38ACK0 +1.8V GND DVD0 DVD1 DVD2 DVD3 DVD4 DVD5 DVD6 DVD7 27MCLK CDLRCK/TDOKT +3.3V TMS TCK TMS TCK TMS TCK TMS TCK 512FSAVD HD0 HD1 HD2 HD3 HD4 HD5 HD6 HD7 HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 HD0 HD1 HD2 HD3 HD4 HD5 HD6 HD7 HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 HA0 HA1 HA2 HA3 HA4 HA5 HA6 HA7 HA8 HA9 HA10 HA11 HA12 HA13 HA14 HA15 HA16 HA17 HA18 HA19 HA20 HA21 DVD0 DVD1 DVD2 DVD3 DVD4 DVD5 DVD6 DVD7 HA21 HA20 HA19 HA18 HA17 HA16 HA15 HA14 HA13 HA12 HA11 HA10 HA9 HA8 HA7 HA6 HA5 HA4 HA3 HA2 HA1 HA0 ADDT0 ADDT15 ADDT1 ADDT14 ADDT2 ADDT13 ADDT3 ADDT12 ADDT4 ADDT11 ADDT5 ADDT10 ADDT6 ADDT9 ADDT7 ADDT8 SDI0 SDI1 SDI2 SDI3 SDI4 SDI5 SDI6 SDI7 SDI0 SDI1 SDI2 SDI3 SDI4 SDI5 SDI6 SDI7 DVD0 DVD1 DVD2 DVD3 DVD4 DVD5 DVD6 DVD7 SS1 SS2 SS3 SS4 SS5 SS6 SS6 SS5 SS4 SS3 SS2 SS1 WW1 ADAD4 ADAD9 ADAD10 ADAD8 ADAD0 ADAD7 ADAD1 ADAD6 ADAD2 ADAD5 ADAD3 WW8 WW2 WW3 WW4 WW6 WW5 WW9 WW7 ADAD11 SS4 SS5 SS4 SS5 SS4 SS5 SS4 SS5 (7/15) +1.8V REGULATOR AV DECODER (Page 58) (Page 58) (Page 59) (Page 65) (Page 62) (Page 62) (Page 62) (Page 57) (Page 67) (Page 57) (Page 57) (Page 59) (Page 58) (Page 58) (Page 58) (Page 58) (Page 64) (Page 62) (Page 69) (Page 70) (Page 71) (Page 57) (Page 65) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 64 64 FL404 IC404 IC405 C448 C442 C443 C441 C440 C439 C438 C450 GLT5160L16P -7TCT GLT5160L16P -7TCT 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 D1 D2 D3 +3.3V GND ADDT0 ADDT1 ADDT2 ADDT3 ADDT4 ADDT5 ADDT6 ADDT7 ADDT8 ADDT9 ADDT10 ADDT11 ADDT12 ADDT13 ADDT14 ADDT15 ADDT0 ADDT1 ADDT2 ADDT3 ADDT4 ADDT5 ADDT6 ADDT7 ADDT8 ADDT9 ADDT10 ADDT11 ADDT12 ADDT13 ADDT14 ADDT15 ADAD4 ADAD5 ADAD6 ADAD7 ADAD8 ADAD9 ADAD4 ADAD5 ADAD6 ADAD7 ADAD8 ADAD9 ADAD11 ADAD10 ADAD0 ADAD1 ADAD2 ADAD3 ADAD11 ADAD10 ADAD0 ADAD1 ADAD2 ADAD3 WW1 WW2 WW3 WW4 WW5 WW1 WW2 WW3 WW4 WW6 WW7 WW8 WW6 WW7 WW8 WW9 (8/15) 16Mbit SD-RAM 16Mbit SD-RAM 7-14. SCHEMATIC DIAGRAM – MB Board (8/15) – (Page 63) (Page 57) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 65 65 FL501 FL502 C510 C514 C516 C517 R511 R547 C513 C502 C503 C501 R524 R527 R525 C505 C511 C518 C519 C522 C521 C523 C520 C515 C508 C512 R520 FB501 FB502 IC501 C504 R528 C509 R532 R531 R530 0.01 0.01 0.01 0.01 0 10k 0.01 0.01 0.01 0.01 0 10k 10k 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 100 CXD1938AR 0.01 0 0.01 10k 10k 10k E1 E2 E3 E4 E5 ACH56 X38CS SI1 ACH34 BCK X38IT SO1 ACH12 LRCK GND CDDOUT 38ACK1 38ACK0 +1.8V XFRRST TMS TCK ACH78A ACH56A ACH34A ACH12A SPDIFAI TDO38 TDOAUD 27M38 XRST +3.3V SC1R 512FS38 ADDR09 ADDR010 CVD07 GND20 ADDR011 ADDR012 ADDR013 ADDR014 GND19 IOVDD8 ADDR015 ADDR016 ADDR017 ADDR018 CVDO6 GND18 IOVDD7 GND17 DSP2BCKI GND16 DSP2ACKI GND15 GND14 DSP2NMII CVD05 GND13 IOVDD6 DSP2EMPI DSP2CH56I DSP2CH34I DSP2CH12I DSP2LRCKI IOVDD5 GND12 CVD04 DSP2CH780 DSP2CH560 DSP2CH340 DSP2CH120 GND11 IOVDD4 DSP2D0 GND30 DATAI05 DATAI04 GND29 IOVDD15 DATAI03 DATAI02 GND28 DATAI01 DATAI00 CVD10 GND27 IOVDD14 SH_SOO SH_CSNI SH_SII GND26 SH_CLKI GND25 CVD09 GND24 IOVDD13 DMA_ACKNO CMD_REQNO CMD_ACKNO SRM_WRNO GND23 IOVDD12 ADDR00 ADDR01 ADDR02 CVD08 GND22 IOVDD11 ADDR03 ADDR04 ADDR05 ADDR06 GND21 IOVDD10 ADDR07 ADDR08 DATAIO6 DATAI07 IOVDD16 GND31 CVD11 XSCAN TDO TDI TMS TRST TCK IOVDD17 GND32 CVD12 DSP1BCKI GND33 DSP1ACKI GND34 DSP1NMII GND35 IOVDD18 GND36 CVD13 DSP1EMPI DSP1CH56I DSP1CH34I DSP1CH12I DSP1LRCKI IOVDD19 GND37 CVD14 DSP1CH780 DSP1CH560 DSP1CH340 DSP1CH120 IOVDD20 GND38 DSP1D0 DSP1EMP0 DSP1BCK0 DSP1LRCK0 IOVDD21 GND39 CVD00 DSP1ACK02 GND00 DSP1ACK00 DSP1ACK01 GND01 GND02 DSP10II IOVDD0 GND03 CVD01 PLL27_CLNI PLL_ENNI RESET_NI GND04 PLL_CLK0 IOVDD1 PLL_AVDD GND05 SCLKI GND06 PLL_TST1I PLL_TST2I PLL_TST4I PLL_AVSS IOVDD2 PLL_TST3I GND07 DSP20II GND08 GND09 DSP2ACK00 DSP2ACK01 DSP2ACK02 IOVDD3 GND10 CVD03 DSP2LRCK0 DSP2BCK0 DSP2EMP0 (9/15) SRM_RDNO STC_CLKI DSP1REQI CVD02 PLL_CLNI DSP2DIACKI DSP2REQI AUDIO DIGITAL SIGNAL PROCESSOR IOVDD9 DSP1DIACKI 7-15. SCHEMATIC DIAGRAM – MB Board (9/15) – • See page 94 for Waveforms. (Page 57) (Page 63) (Page 57) (Page 59) (Page 62) (Page 63) (Page 57) (Page 66) (Page 71) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 66 66 CN501 R546 R541 R590 R552 R592 R566 R544 R536 R588 R589 R549 R506 C532 C535 D503 D501 D502 C525 C528 C543 R556 R557 R551 R509 R539 IC502 R593 27P 0 0 10 0 0 0 0 0 0 0 0 0 100 6.3V 100 6.3V DAP202K-T -146 DAP202K-T -146 DAP202K-T -146 0.47 0.47 0.001 0 0 0 0 0 AK4358VQ 0 E1 E2 E3 E4 E5 MA_MUTE ACH12AO ACH34AO ACH56AO ACH78AO DSADMRO DSADMLO DSCK XDACS GND DSALO DSARO DSACO DSASWO DSALSO DSARSO LRCKA BCKA SPDIFAO A-MUTE 512FS8CH DZF23 DZFR1 DZFL1 LOUT1+ LOUT1- ROUT1+ ROUT1- LOUT2+ LOUT2- ROUT2+ ROUT2- LOUT3+ LOUT3- ROUT3+ ROUT3- DZFL1 DZFR1 DSALO DSARO DSALSO DSARSO DSACO DSASWO DZF23 LOUT2- LOUT2+ ROUT2+ ROUT2- LOUT1- LOUT1+ ROUT1+ ROUT1- DSARSO DSALSO DSASWO DSACO DSARO DSALO ART- ART+ ALT+ ALT- LOUT3- LOUT3+ ROUT3+ ROUT3- ART- ART+ ALT+ ALT- GND SPDIF A+5V ART- MUTE_23 ART+ MUTE_L ALT+ MUTE_R ALT- LOUT2- LOUT2+ LOUT1+ LOUT1- ROUT2- ROUT2+ A_GND ROUT1+ ROUT1- LOUT3- ROUT3+ ROUT3- LOUT3+ A_GND A-MUTE A_GND I2C (FL) (FR) (SL) (SR) (FC) (SW) VREFH AVDD AVSS DZFL1 LOUT1+ LOUT1- ROUT1+ ROUT1- LOUT2+ LOUT2- ROUT2+ ROUT2- LOUT3+ LOUT3- ROUT3+ ROUT3- LOUT4+ LOUT4- DVSS DVDD MCLK BICK PDN ACKSN CAD0 DZF23 DZFR1 SDTI4 SDTI1 SDTI2 SDTI3 LRCK DCLK DSDL4 DSDR4 CCLK/SCL CDTI/SDA CSN/CAD1 DSDL1 DSDR1 DSDL2 DSDR2 DSDL3 DSLR3 DIF0 ROUT4- ROUT4+ (10/15) D/A CONVERTER AGND 7-16. SCHEMATIC DIAGRAM – MB Board (10/15) – • See page 94 for Waveforms. • See page 98 for IC Block Diagram. (Page 65) (Page 59) (Page 58) (Page 84) (Page 57) (Page 71) (Page 69) (Page 57) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 67 67 R618 R605 C623 C622 C620 C621 C618 IC603 C619 R640 R614 C602 C601 C610 C615 C614 C613 R615 R617 C612 C616 C611 C617 C603 C606 C607 C609 C608 C605 R601 R603 IC601 R697 R639 R698 R022 IC602 FB601 0 10k 0.1 0.1 0.1 0.1 0.01 GLT5160L16P -7TCT 47 4V 2.2 0 0.1 0.1 47 4V 0.01 0.01 0.01 75 20k 0.01 0.01 47 4V 0.01 0.001 0.01 100 4V 47 4V 0.01 0.01 0 100 TK11125CSCL-G 0 0 0 0 CXD9698R 0 F1 F2 F3 F4 F5 SCL SDA 27MCLK XRST DVD0 DVD1 DVD2 DVD3 DVD4 DVD5 DVD6 DVD7 GND +3.3V DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 DQ0 CBCR0 Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 CBCR1 CBCR2 CBCR3 CBCR4 CBCR5 CBCR6 CBCR7 CBCR8 CBCR9 P00 P01 P02 P03 P04 P05 P06 P07 A4 A5 A6 A7 A8 A9 A9 A11 A8 A10 A7 A0 A6 A1 A5 A2 A4 A3 DQ8 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 DQ9 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 A0 A1 A2 A3 A10 A11 VIN VOUT CONT GND NOISE (11/15) +2.5V REGULATOR 16Mbit SD-RAM CONVERTER INTERLACE/PROGRESSIVE 7-17. SCHEMATIC DIAGRAM – MB Board (11/15) – • See page 94 for Waveforms. • See page 98 for IC Block Diagram. (Page 68) (Page 57) (Page 63) (Page 57) (Page 68) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 68 68 R021 R620 R663 R664 R665 R675 R676 R677 R678 R679 R680 R681 R682 R683 R674 R686 R687 C626 C635 C624 C625 C627 C628 C629 C631 C636 C637 C634 C639 C638 C633 C630 IC604 IC605 RV601 RV602 CN601 C640 C632 10k 0 0 0 0 2.7k 2.7k 100 300 300 300 300 300 300 680 100 100 100 6.3V 100 6.3V 0.22 0.22 0.22 470p 470p 0.1 0.22 0.001 0.22 0.01 0.22 820p 3900p ADV7310KST TK11125CSCL-G 1k 1k 23P 0.1 0.1 F1 F2 F3 F4 F5 SCL SDA WIDE XRST IPSW +3.3V GND V-MUTE V-OFF RX TX SLINK SIRCS_MODE SCL SDA Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y9 CBCR0 CBCR1 CBCR2 SCL SDA P00 P01 P02 P03 P04 P05 P06 P07 CBCR3 CBCR4 CBCR5 CBCR6 CBCR7 CBCR8 CBCR9 SDA SCL SIRCS_MODE GND TX RX GND GND IPSW V-OFF V-MUTE GND GND Y/G GND Y GND C V GND WIDE GND VIN VOUT CONT GND NOISE VDD_IO P_Y(0) P_Y(1) P_Y(2)/SCANEN P_Y(3)/TESTMODE P_Y(4) P_Y(5) P_Y(6) P_Y(7) VDD GND P_Y(8) P_Y(9) P_C(0) P_C(1) P_C(2) P_C(3) P_C(4) SPI_12C_EN ALS8 SDA SCLK P_HSYNS P_VSYNC P_BLANK P_C(5) P_C(6) P_C(7) P_C(8) P_C(9) RTC/SCRESET/TR CLKIN GND_IO CLKIN_2 S(9) S(8) S(7) S(6) S(5) GND VDD S(4) S(3) S(2) S(1) S(0) S_HSYNC S_VSYNC S_BLANK RSET1 VREF COMP1 V Y C VAA GND Y/G CB/R CR/B COMP2 RSET2 EXT_LF RESET8 (12/15) D/A CONVERTER +2.5V REGULATOR S-LINK CR/B CB/R 7-18. SCHEMATIC DIAGRAM – MB Board (12/15) – • See page 94 for Waveforms. • See page 98 for IC Block Diagrams. (Page 67) (Page 58) (Page 83) (Page 67) (Page 57) (Page 57) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 69 69 R955 R956 R957 R958 R959 R960 R961 R963 R964 C932 C931 C929 C930 C933 C927 C924 R931 C922 FL903 FL901 C913 C919 C916 C915 C914 C920 C917 C910 C912 C905 C903 IC901 IC905 R902 C902 FL902 RB902 RB901 IC903 C901 C904 C909 R910 R915 R916 FL905 R913 C935 R917 C926 C928 C923 R907 R921 C921 R922 R909 R919 C936 C934 IC906 R962 100 100 100 100 100 100 100 100 100 0.01 0.01 0.01 0.01 0.01 0.01 0.01 10k 0.01 100 4V 0.01 0.01 0.01 0.01 0.01 0.01 100 4V 0.22 0.22 10 16V TK11225CMCL-G CXD2753R 0 0.01 10k 10k GLT5160L16P -7TCT 0.01 0.01 0.01 6800 1k 3300 33 0.033 0 0.01 0.01 0.01 0 10k 0.01 10k 12k 100 0.01 0.033 LMH6642MFX/NOPB 100 XSHD SDCK XSAK SDEF SDI0 SDI1 SDI2 SDI3 SDI4 SDI5 SDI6 SDI7 GND SMUTE XSARST XSACS SC1 SO1 SI1 XSARDY 33MSA TCK TMS XFRRST DSARS DSALS DSASW DSAC DSAR DSAL DSCK DSBCK DSADMR DSADML XSRQ PCLK S+5V RF+ CDLRCK/TDOKT TDOSA +3.3V DSCK DCLK DCKE XWES DCKE DCLK XWES SDD7 SDD6 SDI0 SDI1 SDI2 SDI3 SDI4 SDI5 SDI6 SDI7 SDD5 SDD4 SDD3 SDD2 SDD1 SDD0 XCSDAS XRSDAS SDA11 SDA10 SDA9 SDA8 SDA7 SDA6 SDA5 SDA4 SDA3 SDA2 SDA1 SDA0 SDA4 SDA5 SDA6 SDA7 SDA8 SDA9 SDD0 SDD1 SDD2 SDD3 SDD4 SDD5 SDD6 SDD7 XCSDAS XRSDAS SDA11 SDA10 SDA0 SDA1 SDA2 SDA3 SDI0 SDI1 SDI2 SDI3 SDI4 SDI5 SDI6 SDI7 A3 VCC A1 A2 A10/AP A0 A11(BA) CS RAS CAS WE DQML VCCQ DQ7 DQ6 VSSQ DQ5 DQ4 VCCQ DQ3 DQ2 VSSQ DQ1 DQ0 VCC VSS A4 A5 A6 A7 A8 A9 N.C. CKE CLK DQMU N.C. VCCQ DQ8 DQ9 VSSQ DQ10 VCCQ DQ11 VSS DQ15 DQ14 VSSQ DQ13 DQ12 CONT GND NOISE VIN GND VOUT VCC VEE (13/15) DSD DECODER RF BUFFER 16Mbit SD-RAM +2.5V REGULATOR 7-19. SCHEMATIC DIAGRAM – MB Board (13/15) – • See page 94 for Waveforms. • See page 98 for IC Block Diagram. (Page 62) (Page 59) (Page 61) (Page 62) (Page 62) (Page 57) (Page 57) (Page 59) (Page 71) (Page 66) (Page 63) (Page 57) (Page 62) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 70 70 C705 C701 Q701 IC701 R728 R729 C707 C702 R730 R735 R702 R722 R701 R719 R720 R717 R716 R705 C710 R706 R791 C711 C709 R738 C712 C713 R712 IC702 R713 C714 FL701 CN701 IC703 0.01 0.01 DTC114EKA-T146 CXD9705R 100 100 0.1 0.01 100 100 10k 10k 10k 10k 10k 10k 10k 100 0.01 0 100 0.01 0.01 10k 0.01 0.01 10k K9F6408UOC-TCB0T 0 47 4V 3P SN74LV08APWR HD15 HD8 HD9 HD10 HD11 HD12 HD13 HD14 HA19 HA4 HA0 HA1 HA2 HA3 GND TDIKT XADYCS TMS TCK XRST XFRRST XRD XWRH XGACS XGAIT TSENS1 TSENS2 TSENS3 TSENS4 T_LOCK POPUP POPDOWN DIMM TRM+ TRM- DRM+ DRM- LDM+ LDM- LD_IN LD_OUT DR_OP DR_CLS +3.3V CPUCK HA0 HA1 HA2 HA3 HA4 HA19 HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 HA19 HA4 HA3 HA2 HA1 HA0 HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 NFTEST NFWE NFRE NFWP NFALE NFCLE NFCE NFBSY NFCE NFRE NFBSY NFTEST HD12 HD13 HD14 HD15 HD8 HD9 HD10 HD11 NFCLE NFALE NFWE NFWP T_LOCK POPUP POPDOWN TSENS1 TSENS2 TSENS3 TSENS4 T_LOCK POPUP POPDOWN TSENS1 TSENS3 TSENS2 TSENS4 DR_OP DR_CLS LD_IN LD_OUT LDM+ LDM- DRM+ DRM- TRM- TRM+ TRM+ TRM- DRM+ DRM- LDM+ LDM- LD_IN LD_OUT DR_OP DR_CLS GND DSENS_OUT HH_OUT (14/15) LED DRIVE (FOR ADJUSTMENT) GND VCC NAND FLASH MEMORY BUFFER MECHANISM CONTROLLER 7-20. SCHEMATIC DIAGRAM – MB Board (14/15) – • See page 94 for Waveform. (Page 58) (Page 58) (Page 58) (Page 58) (Page 62) (Page 71) (Page 63) (Page 58) (Page 57) (Page 57) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 71 71 7-21. SCHEMATIC DIAGRAM – MB Board (15/15) – • See page 94 for Waveforms. • See page 98 for IC Block Diagram. C802 C803 R814 C807 C806 C805 C810 C809 C808 R817 C813 C812 C811 IC803 C817 C816 IC801 IC802 C801 C814 0.01 0.01 100 0.01 0.01 0.01 100 6.3V 0.01 0.01 0 0.01 0.01 0.01 TK11133CSCL-G 0.01 0.1 CXD9722ATQ GLT5160L16P -7TCT 0.01 0.01 DSCK DSBCK DSADML DSADMR DSAL DSAR DSAC DSASW DSALS DSARS TMS TCK TDOSA TDOAUD SPDIFAI LRCKA BCKA ACH78A ACH56A ACH34A ACH12A XRST XADYCS SO1 SI1 SPDIFAO ACH12AO ACH34AO ACH56AO ACH78AO DSADMLO DSADMRO DSALO DSARO DSACO DSASWO DSALSO DSARSO +5V GND SC1R XFRRST 512FSADY ADD15 ADD14 ADD13 ADD12 ADD11 ADD10 ADD9 ADD8 ADCKE XADCS XADRAS XADCAS XADWES ADA4 ADA5 ADA6 ADA7 ADA8 ADA9 ADCLK ADCKE ADD8 ADD9 ADD10 ADD11 ADD12 ADD13 ADD14 ADD15 ADD0 ADD1 ADD2 ADD3 ADD4 ADD5 ADD6 ADD7 XADWES XADCAS ADA3 ADA2 ADA1 ADA0 ADA10 ADA11 XADCS XADRAS ADCLK ADD0 ADD1 ADD2 ADD3 ADD7 ADD6 ADD5 ADD4 ADA4 ADA5 ADA6 ADA7 ADA11 ADA10 ADA0 ADA1 ADA2 ADA3 ADA9 ADA8 NOISE CONT GND VIN VOUT (15/15) 16Mbit SD-RAM DIGITAL AUDIO PROCESSOR +3.3V REGULATOR (Page 63) (Page 65) (Page 59) (Page 57) (Page 70) (Page 69) (Page 66) (Page 59) (Page 57) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 72 72 7-22. PRINTED WIRING BOARD – MB Board (Component Side) – • See page 56 for Circuit Boards Location. :Uses unleaded solder. C415 FL905 C106 C107 C111 FB401 R125 C607 R791 C113 IC301 C201 C202 C210 C211 C212 C105 C236 C248 C253 C255 C257 C258 C262 C304 C310 C311 C312 C313 C314 C426 R138 C319 C321 C322 C323 C325 C329 C331 C334 C335 C256 C338 C339 C340 C344 C266 R407 C413 C414 C408 C305 C418 C419 C420 C429 C430 C431 C432 C433 C437 C416 C436 C411 R179 RB106 C247 C103 C109 C234 C242 C271 C302 C308 C221 C238 C401 C263 C405 C407 L202 L201 R141 FL201 FL106 R324 R107 R110 R113 R112 R115 R118 R175 RB109 R183 CN203 R106 C122 R178 X102 R129 R187 R142 R210 R211 R212 R147 R316 X101 R329 R330 C120 R332 R338 R124 R261 R199 R419 R418 R310 R311 R313 R317 R315 RB104 R318 R326 RB110 R328 R331 RB111 RB108 R333 R336 R337 RB107 RB105 R259 R148 R358 R359 R360 R366 R416 C104 R426 R314 RB103 R402 R351 R185 R327 R321 CN107 R114 C261 R282 R108 R206 R320 IC104 CN102 R325 R281 IC103 R184 R319 R312 R109 CN104 CN204 R274 C712 C801 C807 C701 C702 C705 C710 C711 C923 C808 C124 C933 C126 C127 C810 C125 C714 R814 R701 R702 R103 R722 R817 R706 R713 FB105 FB107 FB109 FB111 FL107 FL103 FL104 FL108 IC701 IC801 R687 R686 C501 C502 C505 C511 C513 C514 C517 C522 C608 C620 C622 C624 C625 C627 C628 C629 C630 C633 C634 C508 C518 C535 C623 C914 C915 C916 C917 C921 C636 C924 C926 C927 C928 C532 C910 C913 R620 C626 C635 IC604 C609 C610 C611 C619 C903 R021 CN106 R101 FB122 FL903 FL502 FL501 RV602 RV601 RV101 R665 R902 R664 R639 R962 R557 R960 FB121 R957 R956 R917 R528 R511 R680 R683 R682 R681 R678 R663 R532 R539 CN501 R964 R556 R589 R931 CN601 R524 R525 R531 R566 R592 CN105 R963 R676 CN103 R961 R640 R959 R544 R547 R588 R955 IC501 R674 R675 R958 IC905 IC108 IC403 IC603 FL701 CN101 CN701 C213 FB124 FB126 FB123 FB125 R120 R119 R121 R122 FB127 R196 R151 41 60 20 1 61 80 40 21 1 44 132 89 45 88 176 133 1 44 44 88 176 133 89 132 157 208 1 52 156 105 104 53 1 30 31 60 120 91 90 61 1 7 2 8 1 7 2 8 1 7 2 8 1 7 2 8 1 7 2 8 1 7 2 8 1 7 2 8 1 7 2 8 1 7 2 8 (COMPONENT SIDE) MB BOARD 1-688-439- 11 (CHASSIS) (CHASSIS) (CHASSIS) (CHASSIS) 1 26 OPTICAL PICK-UP BLOCK (KHM-290AAA) (NC) A PANEL-L BOARD CN1005 E LED BOARD CNP504 (NC) 1 1 16 48 33 49 64 32 17 1 1 6 1 8 9 D SENSOR BOARD CN81 B DRIVER BOARD CN901 C DRIVER BOARD CN902 (FOR ADJUSTMENT) F AV BOARD CN208 G AV BOARD CN203 H AV BOARD CN202 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 A B C D E F G H I J K • Semiconductor Location Ref. No. Location IC103 F-6 IC104 H-4 IC108 I-6 IC301 E-4 IC403 H-9 IC501 E-12 IC603 E-9 IC604 C-8 IC701 I-15 IC801 D-15 IC905 H-12 (Page 86) (Page 90) (Page 78) (Page 74) (Page 74) (Page 80) (Page 80) (Page 80) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 73 73 FL301 C934 C936 IC906 R907 R921 R922 R916 R909 R910 R915 C232 R198 R173 FB601 C121 R163 R152 C129 C132 C229 C214 C215 C216 R301 C219 C220 C225 C226 C316 C317 C233 C240 C241 C244 C243 C246 C251 C252 C249 C254 C259 C260 C264 C265 C270 C272 C303 C218 C309 C228 R105 C101 C230 C235 C320 C324 C328 C245 C327 C330 C332 C333 C337 C343 C404 C410 C423 C318 C326 C438 C439 C440 C441 C443 C448 R414 C450 C442 C427 FL109 R160 R166 C315 IC101 R159 R117 R177 Q201 Q202 FL404 FL403 FL402 FL105 R157 R181 R111 R227 R102 FL102 FB112 R182 R188 R197 R190 R139 R126 R180 C115 R144 R146 R219 R150 R154 R222 R223 D101 R226 R229 R231 R232 R167 R133 R172 C128 R176 R243 R245 R249 R260 C108 R218 R171 IC202 R221 R224 C102 IC401 R233 R165 R235 R236 R193 R241 C118 R248 R251 R189 R349 R262 R263 R264 R123 R269 R220 R225 R230 R234 R239 R238 R240 R242 R246 R244 R265 R430 R352 R302 IC302 R170 R335 R253 R256 R194 C417 R168 C130 IC102 IC303 R323 R254 R250 R434 R273 C424 R334 R322 R255 R192 IC201 R195 R536 C803 C809 C811 C812 C912 C707 C709 C806 C813 C814 C817 C713 Q002 R720 R730 R705 R712 C802 R716 C614 R719 R728 R735 R717 R729 R738 FB104 FB106 FB108 FB110 L101 Q701 C528 IC703 IC803 C816 C640 C805 C503 C504 C509 C510 C512 C515 C516 C519 C520 C521 C523 C525 C543 C605 C606 C615 C616 C613 C617 C618 C621 C637 C638 C639 C601 C602 C603 C612 C901 C902 C904 C905 C909 C919 C920 C922 C929 C930 C932 C931 C935 Q001 IC602 IC605 R541 R618 R698 R022 IC601 FL902 FL901 FB502 FB501 D503 D502 D501 RB902 RB901 C632 C631 R679 R614 R593 R552 R546 R913 R601 R919 R506 R509 R520 R530 R549 R551 R590 R603 R615 R617 IC502 R527 R605 IC106 R677 IC802 IC702 IC903 IC404 IC405 R191 IC901 R697 RB102 1 36 108 73 37 72 144 109 1 2 7 8 1 2 7 8 1 12 36 48 37 A A A K K K K K K 13 24 25 1-688-439- 11 (CONDUCTOR SIDE) MB BOARD 1 3 5 4 1 3 5 4 E E E 1 3 6 4 1 3 5 4 1 3 5 4 4 5 3 1 E E 5 4 5 4 1 1 25 26 50 3 1 1 16 17 32 64 49 48 33 3 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 A B C D E F G H I J K 7-23. PRINTED WIRING BOARD – MB Board (Conductor Side) – • See page 56 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location Ref. No. Location D101 H-14 D501 B-6 D502 B-6 D503 B-6 IC101 H-15 IC102 F-11 IC106 I-13 IC201 C-12 IC202 C-14 IC302 D-12 IC303 F-13 IC401 G-10 IC404 H-9 IC405 I-9 IC502 C-4 IC601 C-8 IC602 D-9 IC605 C-9 IC702 H-2 IC703 G-1 IC802 D-2 IC803 F-3 IC901 I-4 IC903 H-5 IC906 F-5 Q001 J-4 Q002 J-4 Q201 B-11 Q202 B-11 Q701 I-3 w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 74 74 7-24. PRINTED WIRING BOARD – DRIVER Board – • See page 56 for Circuit Boards Location. :Uses unleaded solder. R932 C908 CN902 CN906 CN901 R915 R922 R930 R929 R920 R919 R907 R905 R903 R902 R924 R926 R910 Q952 Q951 Q942 Q941 Q931 D935 R934 CN905 CN904 CN903 LP902 LP901 C907 C915 C914 G901 IC961 IC941 R933 R912 R904 C909 C906 R901 R913 R916 R935 R937 C910 R927 C913 R925 R917 R918 R914 R928 R921 R923 C905 C911 R911 R909 C902 C903 R906 C901 R908 R936 C904 R931 (COMPONENT SIDE) DRIVER BOARD 1-688-442- 11 (11) (CONDUCTOR SIDE) DRIVER BOARD 1-688-442- 11 (11) E E 8 1 6 1 E E E C MB BOARD CN106 B MB BOARD CN103 M AV BOARD CN207 J LOADING SW BOARD CN903 K DOOR MOTOR BOARD CNP602 L LOADING MOTOR BOARD CNP601 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D E F 1 10 1 10 (CHASSIS) • Semiconductor Location Ref. No. Location D935 C-3 IC941 E-11 IC961 C-11 Q931 C-3 Q941 B-3 Q942 B-3 Q951 C-3 Q952 C-3 (Page 72) (Page 72) (Page 80) (Page 76) (Page 76) (Page 76) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 75 75 R916 C907 R902 R903 R908 R909 C903 C913 C905 R910 R911 R912 R913 R914 R915 R905 R907 R920 R919 R930 R929 R928 C908 C910 C909 R918 R931 R923 R921 R917 R924 R904 C902 R906 C901 R901 R922 C911 R926 R925 R927 C906 C915 R934 R932 C904 C914 D935 Q952 Q951 Q941 Q942 R936 R937 CN906 CN901 R935 R933 Q931 G901 CN905 CN904 CN903 CN902 IC941 IC961 220k 2.2 50V 1 1 15k 180k 0.1 0.1 0.1 16k 150k 150k 180k 180k 16k 1 1 1 1 1 1 4.7k 0.47 0.47 0.47 4.7k 100k 1k 150k 100k 100 10 0.1 15k 0.1 10 100k 0.1 100k 1k 150k 0.1 47 25V 2.2k 2.2k 0.1 47 25V 02CZ15-TE85L UN2213-TX UN2113-TX UN2113-TX UN2213-TX 2.2k 2.2k 3P 6P 100 100 2SC2712-YG -TE85L 4P 7P 4P 8P LA6510 LA6510 DRI LDI LDO DRO DRO DRI LDO LDI REF1 OUT1 IN1- IN1+ VEE IN2+ IN2- OUT2 REF2 VCC VEE VCC VSENS2 VSENS1 LDO DRO LDI LDOUT DOOR OUT DRI GND GND DOOR MOTOR DOOR MOTOR TABLE MOTOR TABLE MOTOR LOADING MOTOR LOADING MOTOR T_LOCK POPUP POPDOWN SW+11V(M) SW-11V(M) GND(M) LD_IN LD_OUT DR_OP DR_CLS (CHASSIS) MOTOR DRIVE TABLE MOTOR DRIVE SWITCH LOADING/DOOR MOTOR DRIVE TABLE REGULATOR Q941,942,951,952 7-25. SCHEMATIC DIAGRAM – DRIVER Board – • See page 98 for IC Block Diagrams. (Page 77) (Page 77) (Page 77) (Page 58) (Page 58) (Page 85) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 76 76 CNP621 S622 JW822 S611 S612 CNP611 M601 M602 CNP601 CLP2 JW823 CN621 CNP603 S621 M603 CNP602 CN611 1-688-448- 11 (11) LOCK SW BOARD DOOR SW BOARD 1-688-450- 11 (11) LOADING MOTOR BOARD 1-688-447- 11 (11) LOADING SW BOARD 1-688-446- 11 (11) 1-688-451- 11 (11) DOOR MOTOR BOARD 1 2 (LOCK) (LOADING) OUT IN 1 1 1 1 5 7 2 4 DRIVER BOARD CN903 J DRIVER BOARD CN904 K (DOOR) OPEN CLOSE (POP) UP DOWN 5 1 M (DOOR) 4 1 DRIVER BOARD CN905 L M (TABLE) (LOADING) M 7-26. PRINTED WIRING BOARDS – MOTOR/SWITCH Section – • See page 56 for Circuit Boards Location. :Uses unleaded solder. (Page 74) (Page 74) (Page 74) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 77 77 7-27. SCHEMATIC DIAGRAM – MOTOR/SWITCH Section – M603 S622 CNP621 CN621 CNP603 CNP602 CN611 CNP611 CNP601 S612 S611 M602 M601 S621 2P 2P 4P 7P 5P 5P 4P GND T_LOCK GND T_LOCK DOOR MOTOR DOOR MOTOR GND POPUP POPDOWN GND POPUP POPDOWN GND POPUP POPDOWN T_LOCK GND LD_IN LD_OUT DR_OP DR_CLS DR_OP DR_CLS DR_OP DR_CLS (LOCK) (POP) UP DOWN r r (DOOR) OPEN CLOSE LOADING MOTOR LOADING MOTOR TABLE MOTOR TABLE MOTOR (LOADING) (TABLE) (DOOR) (LOADING) OUT IN R (Page 75) (Page 75) (Page 75) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 78 78 7-28. PRINTED WIRING BOARDS – SENSOR Section – • See page 56 for Circuit Boards Location. :Uses unleaded solder. CN82 IC83 IC82 IC81 IC84 CN83 CN81 C81 R85 R81 R83 R82 R84 CNP82 Q81 CNP83 D81 (COMPONENT SIDE) SENSOR BOARD 1-688-444- 11 (11) 1-688-444- 11 (11) (CONDUCTOR SIDE) SENSOR BOARD 1 2 2 1 1 3 5 4 2 1 3 5 4 5 4 2 1 3 2 1 3 5 4 2 1 2 2 1 DISC DETECT SENSOR DISC DETECT SENSOR 1 2 3 4 5 6 7 8 9 10 11 A B C D E F G H D MB BOARD CN105 1-688-452- 11 (11) 1-688-453- 11 (11) D. SENS IN BOARD D. SENS OUT BOARD • Semiconductor Location Ref. No. Location D81 F-8 IC81 D-8 IC82 D-9 IC83 D-10 IC84 C-9 Q81 G-5 (Page 72) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 79 79 7-29. SCHEMATIC DIAGRAM – SENSOR Section – CN81 R85 C81 R81 R82 R83 R84 IC82 IC83 IC84 IC81 D81 Q81 CNP83 CNP82 CN83 CN82 7P 680 0.1 820 820 820 820 RPI-1391 RPI-1391 RPI-1391 RPI-1391 GL528V PT483F1 2P 2P 2P 2P +5V GND 1 3 4 5 1 3 5 4 1 3 5 4 1 3 5 4 IC81-84 TABLE POSITION SENSOR1-4 TSENS4 TSENS3 TSENS2 TSENS1 S+5V D.SENS GND D.SENS(OUT) SENSOR DETECT DISC SENSOR DETECT DISC GND D.SENS(OUT) S+5V D.SENS DSENS (Page 58) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 80 80 7-30. PRINTED WIRING BOARD – AV Board (Component Side) – • See page 56 for Circuit Boards Location. :Uses unleaded solder. CN202 IC302 IC303 CN205 CN206 CN201 C342 CN203 D301 D302 D303 D304 C341 L201 IC201 D309 R292 L101 D102 CN208 C339 D308 D310 C336 IC102 C103 C104 C108 C106 C102 D101 CN207 IC301 L102 D201 Q212 Q204 Q210 Q207 Q205 Q211 Q208 Q206 Q209 C206 C205 C209 C329 D306 D305 (COMPONENT SIDE) AV BOARD 1-688-440- 11 (11) 1 7 A A K E E E E E E E E E N POWER BOARD CN201 F MB BOARD CN101 M DRIVER BOARD CN906 Q PANEL-L BOARD CN1001 1 3 2 1 3 2 G MB BOARD CN501 H MB BOARD CN601 1 6 T RC-232C BOARD CN801 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 A B C D E F G H I J K L M • Semiconductor Location Ref. No. Location D101 M-13 D102 M-13 D201 J-3 D301 D-3 D302 D-3 D303 D-3 D304 E-3 D305 E-4 D306 E-5 D308 H-5 D309 H-7 D310 H-6 IC102 L-14 IC201 K-5 IC301 F-3 IC302 G-5 IC303 G-6 Q204 L-3 Q205 L-2 Q206 L-3 Q207 L-3 Q208 L-2 Q209 L-2 Q210 L-3 Q211 L-2 Q212 L-2 (Page 82) (Page 92) (Page 72) (Page 74) (Page 86) (Page 72) (Page 72) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 81 81 IC206 CN204 LP101 C283 G201 J201 C213 C223 C222 C232 C239 C231 C244 C243 C259 C260 C251 C252 C268 C267 C215 C214 C225 C224 C234 C240 C228 C233 C246 C245 C261 C262 C253 C254 C270 C269 LP102 C273 C274 C257 C258 C217 C216 C265 C266 C227 C226 C236 C241 J102 J104 J301 J101 C308 J103 C311 C328 C333 C338 C326 C331 C340 Q304 Q306 C303 C310 C313 C319 C320 G301 S101 S101 PS302 C279 C280 C281 C321 C334 C330 Q303 Q305 C314 C229 C204 C201 C212 C219 C218 C221 C220 C238 C242 C230 C271 C272 C237 C256 C255 C264 C263 C247 C248 C250 C249 C235 Q311 Q312 C322 C113 C399 D103 Q301 R295 C343 C344 R246 R245 R244 R242 R243 R250 R118 R247 IC202 R226 R227 R231 R229 R163 Q214 R214 R215 Q213 R162 R176 R233 R195 R216 R206 R207 R192 R177 R161 R293 R201 R189 R209 R160 R230 R219 R221 R220 R237 R200 R190 R175 R191 IC203 R187 R172 R173 R174 Q216 Q215 R181 R167 R164 R132 Q219 Q220 R166 R180 R193 R165 R196 R218 R179 R236 R198 R203 R252 R202 R211 R186 R210 R232 R217 R178 R188 R223 R222 R239 R238 IC204 R248 R277 R271 R276 D311 R289 R279 R283 R240 R241 R224 R257 R258 R259 R260 R261 R262 R254 R251 R256 R253 R273 R255 C301 C304 C305 C306 C307 C309 C316 R294 C324 C323 C335 Q302 R264 R265 R266 R267 R269 R280 R281 R284 R287 R290 D307 Q308 Q310 R103 R235 C327 C325 C332 C337 R275 R274 R278 R282 R288 R291 R285 Q307 Q309 R106 Q104 Q105 R225 R108 C105 R101 R109 C107 C109 R110 D105 R112 R113 R114 R129 R130 R131 R116 R117 R111 R119 R115 D106 D104 R133 R134 R135 R142 R143 R144 R150 R151 R157 R149 R148 R152 R153 R155 R156 Q221 C210 C211 R145 R158 R154 R208 R249 IC205 R234 R204 R199 R213 R228 R205 R194 R182 R184 R212 R197 R185 R171 R183 R168 R169 R170 Q217 Q218 1 4 8 5 1 4 8 5 1 4 8 5 1 4 8 5 (CONDUCTOR SIDE) AV BOARD 1-688-440- 11 (11) SCAN SELECT PROGRESSIVE INTERLACE SELECTABLE K K K K K K K K A A A A 6 8 5 7 2 4 1 9 10 3 Y 2 1 PB/CB PR/CR COMPONENT VIDEO OUT LINE OUT VIDEO LINE OUT AUDIO S VIDEO OUT OPTICAL COAXIAL IC206 2 1 2 1 L R WOOFER 5.1CH OUTPUT J202 CENTER R L REAR R L FRONT DIGITAL OUT PCM/DTS/ DOLBY DIGITAL 1 3 E 3 1 P T102 E E E A A K E E D G S D E C B E C B E C B E E E E E E E E E C B G S E (CHASSIS) E E (CHASSIS) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 A B C D E F G H I J K L M 7-31. PRINTED WIRING BOARD – AV Board (Conductor Side) – • See page 56 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location Ref. No. Location D103 C-6 D104 C-5 D105 C-6 D106 C-4 D307 I-16 D311 H-11 IC202 G-5 IC203 G-7 IC204 G-9 IC205 G-3 IC206 B-14 Q104 L-3 Q105 L-3 Q213 E-6 Q214 E-5 Q215 E-8 Q216 E-7 Q217 E-10 Q218 E-9 Q219 E-4 Q220 E-3 Q221 C-15 Q301 H-14 Q302 H-14 Q303 F-13 Q304 F-12 Q305 F-13 Q306 F-11 Q307 H-12 Q308 I-15 Q309 H-12 Q310 J-15 Q311 G-12 Q312 H-11 (Page 92) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 82 82 D802 C801 C811 C810 C812 C808 CN801 FB802 IC804 FL801 FB801 R820 R811 R809 C813 CNP801 J801 G801 S801 G802 R808 R819 R814 R815 R806 C809 C814 R816 R817 C807 C815 R818 1 8 16 9 K K A (COMPONENT SIDE) RC-232C BOARD 1-688-443- 11 (11) 1-688-443- 11 (11) (CONDUCTOR SIDE) RC-232C BOARD 1 6 T AV BOARD CN201 S-LINK CONTROL S IN 1 2 8 9 RS232C COMMAND MODE S801 1 2 3 7-32. PRINTED WIRING BOARD – RS-232C Board – • See page 56 for Circuit Boards Location. :Uses unleaded solder. (Page 80) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 83 83 C106 R110 R132 R130 R131 R129 R113 R112 R111 R114 R115 R116 R117 R118 R119 D106 D104 D105 D103 C108 C107 C109 C104 C103 IC102 R109 C105 D101 R108 Q105 Q104 R106 D102 CN202 CN201 J104 J103 J101 R101 R103 S101 J102 FB801 FB802 S801 C801 C811 G801 FL801 IC804 CN801 C815 C814 C810 C809 C808 C807 C813 R817 R816 R808 R809 R814 R806 R819 R818 R820 R815 D802 G802 J801 CNP801 C102 C812 47 16V 10k 0 1k 1k 1k 68 68 68 68 68 68 68 68 68 HZM6.8ZWA1TL HZM6.8ZWA1TL HZM6.8ZWA1TL HZM6.8ZWA1TL 47 16V 0.1 0.1 47 16V 47 16V LA73053-TLM-E 0 0.047 1SR154-400TE-25 L102 22µH 3.3k UN2111-TX UN2213-TX 0 1SR154-400TE-25 L101 22µH 23P 6P 4P 2P 2P 0 0 3P 100 6.3V 10 16V MAX3232 6P 0.1 0.1 0.1 0.1 0.1 0.1 0.001 100 100 0 0 0 0 1k 2.2k 1k 22 HZM6.8ZWA1TL 9P 47 16V 0.1 2L 1L P_GND 2R 1R D_GND +5V_ES -5V_ES V_OFF E+3.3V R1 RGND R2 L1 LGND L2 V1 VGND V2 1C 1CGND 2C 2CGND S1 2YGND 2Y 1YGND 1Y R-Y B-Y Y S2 (1/3) VIDEO AMP Q104,105 WIDE ON/OFF SWITCH SCAN SELECT PROGRESSIVE INTERLACE SELECTABLE GND Y PB/CB PR/CR COMPONENT VIDEO OUT 2 1 S VIDEO OUT LINE OUT VIDEO 1 2 L R LINE OUT AUDIO 1 2 1 2 S-LINK SIRCS_MODE C1+ V+ C1- C2+ C2- V- VCC GND (CHASSIS) (CHASSIS) E+3.3V TX RX RS-232C DRIVER/RECEIVER COMMAND MODE 1 2 3 S-LINK CONTROL S IN RS232C GND 7-33. SCHEMATIC DIAGRAM – AV (1/3)/RS-232C Boards – • See page 94 for Waveforms. • See page 98 for IC Block Diagram. (Page 68) (Page 85) (Page 85) (Page 85) (Page 84) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 84 84 7-34. SCHEMATIC DIAGRAM – AV Board (2/3) – IC201 R142 R152 R240 R241 R222 R232 J201 C259 R293 R195 C243 R236 R237 C244 R201 R192 C268 R294 R208 R209 IC202 R230 C252 R216 C267 R177 R176 R163 R162 C213 R178 R179 R164 C214 R198 R196 R202 R210 C261 R221 C269 R220 C245 R193 R211 R217 C254 R223 C270 R203 R181 R180 C215 R166 R233 Q215 Q216 C246 R239 R238 IC203 R161 R160 R251 R252 R262 J301 C281 R249 R250 R248 R247 R245 R242 R243 R235 C274 R227 C250 C249 R226 C273 R229 Q220 Q219 C257 C266 R191 R207 R215 R219 R214 R206 R200 R190 R167 R165 C256 C263 R231 R234 R212 R204 R199 R197 R205 R213 R218 R194 IC204 IC205 R187 R186 C218 C217 R184 R185 R183 R182 C216 R169 R168 R257 C279 R258 R260 R259 R261 C280 R225 C272 R188 R189 C219 R172 R170 R171 R173 C210 C212 C211 R145 R158 R154 R175 R174 R246 C205 R149 R143 Q205 R148 C247 C248 R224 C271 R228 Q208 Q211 Q209 R150 Q206 C206 R144 R133 R135 D201 CN203 R134 R256 R255 R254 R253 C204 Q204 C209 R153 Q210 Q207 R244 J202 IC206 C283 C260 C251 C262 Q214 Q213 C253 C258 C265 C255 Q218 Q217 C264 R155 R156 Q212 R157 R151 Q221 C220 C221 C223 C224 C225 C226 C227 C228 C229 C230 C231 C232 C233 C234 C235 C236 C237 C238 C239 C240 C241 C242 C222 NJM78M05DL1A-TE1 10k 47k 3.3k 3.3k 47k 470 4P 47 50V 1.8k 5.6k 47 25V 3.3k 3.3k 47 25V 820 2.2k 0.00022 1.8k 5.6k 820 NJM2114M-TE2 470 47 50V 2.2k 0.00022 1k 1k 820 820 0.0039 1k 1k 820 0.0039 820 2.2k 820 2.2k 47 50V 47k 0.00022 47k 47 25V 2.2k 820 2.2k 47 50V 47k 0.00022 820 1k 1k 0.0039 820 470 2SD1938(F) -T(TX) 2SD1938(F) -T(TX) 47 25V 3.3k 3.3k NJM2114M-TE2 1.3k 1.3k 100 100 10k 1P 47 16V 100 100 100 100 100k 3.3k 3.3k 470 0.00022 47k 47 25V 47 25V 47k 0.00022 470 2SD1938(F) -T(TX) 2SD1938(F) -T(TX) 47 50V 47 50V 2.2k 820 820 2.2k 2.2k 820 820 2.2k 820 820 47 50V 47 50V 470 470 2.2k 820 820 2.2k 820 820 2.2k 2.2k NJM2114M-TE2 NJM2114M-TE2 1k 1k 0.0039 0.0039 1k 1k 1k 1k 0.0039 820 820 1k 47 16V 1k 220 1k 68 47 16V 47k 0.00022 1k 1k 0.0039 820 820 820 820 0.01 47 25V 0.1 0 0 0 820 820 100k 1 50V 10k 10k UN2213-TX 47k 47 25V 47 25V 47k 0.00022 470 DTC124TKA -T146 2SB709A -QRS-TX DTC124TKA -T146 47k UN2213-TX 1 50V 10k 4.7k 4.7k DAN202K-T-146 27P 4.7k 100 100 100 100 1000 16V UN2213-TX 1 50V 10k 2SB709A-QRS-TX DTC124TKA-T146 100k 2P TOTX179L 0.0033 100V 0.1 0.1 0.1 2SD1938(F) -T(TX) 2SD1938(F) -T(TX) 0.1 0.1 0.1 0.1 2SD1938(F) -T(TX) 2SD1938(F) -T(TX) 0.1 10k 10k 2SB709A -QRS-TX 10k 10k 2SC2712-YG -TE85L 330p 100V 330p 100V 330p 100V 330p 100V 330p 100V 330p 100V 330p 100V 0.0047 100V 0.0047 100V 0.0047 100V 470p 100V 0.0047 100V 330p 100V 0.0047 100V 330p 100V 0.0047 100V 330p 100V 0.0047 100V 330p 100V 330p 100V 330p 100V 330p 100V 470p 100V P_GND D_GND P_GND MUTE3.3V +12V_ES -12V_ES 2L 1L 1R 2R 1L 1GND 1R 2L 2GND 2R A1 B A2 MUTE_23 MUTE_L MUTE_R A-MUTE ALT- ALT+ ART+ ART- A_GND LOUT3- LOUT3+ ROUT3+ ROUT3- A_GND LOUT2- LOUT2+ ROUT2+ ROUT2- A_GND LOUT1- LOUT1+ ROUT1+ ROUT1- A+5V GND SPDIF (2/3) L R FRONT L R REAR CENTER WOOFER 5.1CH OUTPUT OPTICAL COAXIAL DIGITAL OUT PCM/DIS/ DOLBY DIGITAL TRANSCEIVER OPTICAL WAVE SHAPER MUTING MUTING MIX AMP VCC VEE VEE VCC MUTING MUTING MIX AMP Q204,207,210 MUTING CONTROL SWITCH Q205,208,211 MUTING CONTROL SWITCH MUTING CONTROL SWITCH Q206,209,212 VEE VCC MIX AMP MUTING MUTING VEE VCC MIX AMP MUTING MUTING +5V REGULATOR AGND (Page 66) (Page 85) (Page 85) (Page 83) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 85 85 R290 Q310 Q308 C335 C334 R284 R280 R281 D307 R287 CN208 CN207 C324 C320 C316 C313 C306 C305 C323 C319 R269 C309 C310 C301 C307 C303 R267 R266 R265 C304 R264 Q301 R292 C338 C340 R289 R283 C333 C331 C344 R279 C343 R276 C328 C322 R277 C314 R271 R273 C311 D302 D301 D304 D303 C308 IC303 D310 Q309 Q307 C337 C339 D308 R291 R278 D306 C329 C332 R282 Q305 Q303 R274 C327 D305 C341 C325 R275 IC302 R288 R285 C336 CN204 D309 D311 CN206 Q312 Q306 Q304 Q311 C330 C321 Q302 C342 PS302 R295 CN205 C326 C201 4.7k 2SB709A-QRS -TX 2SC2712-YG -TE85L 470p 220 10V 33k 1k 10k DAP202K-T -146 47k 7P 3P 0.01 100 10V 0.01 100 10V 0.01 0.01 0.01 100 25V 0 0.01 100 10V 0.01 0.01 100 10V 3.3k 3.3k 3.3k 0.01 10k 2SD1766FT100QR 39k 0.1 47 25V 100 100 0.1 47 25V 0.01 3.3k 0.01 100 0.1 47 25V 3.3k 4700 35V 47k 47k 2200 35V EC10QS04-TE12L5 EC10QS04-TE12L5 EC10QS04-TE12L5 EC10QS04-TE12L5 0.1 NJM4580E-D-TE2 IC301 µPC2918T-E1 02CZ5.1-TE85L UN2213-TX UN2213-TX 0.1 47 16V 1SS355TE-17 39k 3.3k 1SS355TE-17 0.01 0.1 100 2SC5171 2SA1930 100 0.1 1SS355TE-17 100 16V 0.001 3.3k NJM4580E-D-TE2 100 22k 0.01 3P 1SS355TE-17 02CZ12-TE85L 7P 2SK246GR-TPE2 2SC5171 2SA1930 2SK246GR-TPE2 270 10V 270 10V UN2111-TX 100 16V 0 13P 0.001 100V 47 L201 100µH 25V D_GND MUTE3.3V +12V_ES -12V_ES V_OFF +5V_ES -5V_ES D_GND E+3.3V P_GND S S (3/3) P-CONT REGULATOR CONTROL SWITCH SW-11V(M) +1.8V REGULATOR I O G B+ SWICTH Q308,310 REGULATOR CONTROL SWITCH VEE VCC REGULATOR +12V REGULATOR -12V REGULATOR CONTROL SWITCH REGULATOR CONTROL SWITCH VEE VCC REGULATOR +5V REGULATOR -5V SWITCH Q307,309 VIDEO ON/OFF Q301,302 B- SWICTH 7-35. SCHEMATIC DIAGRAM – AV Board (3/3) – (Page 83) (Page 93) (Page 84) (Page 93) (Page 83) (Page 59) (Page 75) (Page 89) (Page 84) (Page 83) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 86 86 7-36. PRINTED WIRING BOARD – PANEL-L Board (Component Side) – • See page 56 for Circuit Boards Location. :Uses unleaded solder. R1059 R1071 R1001 R1017 R1083 C1003 C1009 C1011 C1016 C1004 R1015 C1019 R1058 R1041 R1044 CN1001 CN1002 CN1005 R1062 D1002 D1085 Q1011 Q1002 IC1005 R1047 Q1012 Q1013 Q1014 Q1015 Q1016 Q1071 Q1081 Q1082 Q1083 R1009 R1020 R1010 R1018 R1016 R1019 R1060 R1023 R1024 R1026 R1031 Q1001 R1032 R1035 R1040 R1039 R1046 R1036 R1051 R1052 R1053 R1054 R1055 R1056 R1057 R1061 R1063 R1064 R1065 R1076 R1077 R1080 C1002 R1022 D1012 Q1017 Q1006 Q1005 (COMPONENT SIDE) PANEL-L BOARD 1-688-441- 11 (11) E E E E E E E E E A A K 1 3 E E E E E E SACD 1 7 Q AV BOARD CN206 A MB BOARD CN102 R PANEL-R BOARD CN1101 5 4 1 2 3 4 5 6 7 8 9 10 11 A B C D E F G H I J K • Semiconductor Location Ref. No. Location D1002 G-9 D1012 C-7 D1085 B-6 IC1005 G-9 Q1001 I-1 Q1002 I-1 Q1005 F-10 Q1006 F-9 Q1011 C-5 Q1012 C-7 Q1013 C-9 Q1014 H-3 Q1015 I-3 Q1016 B-9 Q1017 B-9 Q1071 G-5 Q1081 C-2 Q1082 C-2 Q1083 C-6 (Page 80) (Page 72) (Page 90) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 87 87 CN1003 L1081 C1017 C1041 C1052 C1081 C1082 C1085 C1086 D1011 D1013 D1014 D1015 IC1004 L1082 CN1004 R1051 S1001 S1002 S1003 S1004 S1005 S1006 S1007 S1008 S1009 X1001 FL1001 T1081 R1042 R1079 IC1006 IC1003 R1090 R1091 R1092 R1093 R1094 R1095 R1096 R1097 R1098 R1078 R1088 R1029 R1087 R1086 R1085 R1028 R1089 IC1008 C1015 IC1007 R1013 C1036 C1032 C1033 R1073 R1074 D1086 R1099 C1089 R1002 R1003 C1087 D1082 R1025 C1035 IC1009 FB1001 D1083 R1007 R1014 C1042 C1014 R1006 C1031 R1045 R1067 R1069 C1083 D1081 C1034 R1082 R1081 R1084 C1088 D1084 R1021 R1012 R1043 R1038 C1005 R1005 R1011 R1004 1 1 3 5 4 1 3 3 1 2 5 4 80 40 20 21 61 60 41 30 1 100 81 80 31 50 51 (CONDUCTOR SIDE) PANEL-L BOARD 1-688-441- 11 (11) MULTI CHANNEL PROGRESSIVE 1 11 DC/DC CONVERTER 45 42 6 3 FLUORESCENT INDICATOR TUBE 1 1 4 8 (NC) S KEY BOARD CNP503 S1101 – 1109 1 3 VIDEO OFF D1015, S1005 FL OFF TIME/TEXT LOAD FOLDER 1/ALL DISC SURROUND VIDEO CONTROL D1014, S1001 1 2 3 4 5 6 7 8 9 10 11 A B C D E F G H I J K CL1001 7-37. PRINTED WIRING BOARD – PANEL-L Board (Conductor Side) – • See page 56 for Circuit Boards Location. :Uses unleaded solder. • Semiconductor Location Ref. No. Location D1011 C-6 D1013 C-2 D1014 H-8 D1015 I-8 D1081 C-7 D1082 C-7 D1083 C-7 D1084 C-6 D1086 B-6 IC1003 E-4 IC1004 K-7 IC1006 D-6 IC1007 F-7 IC1008 D-7 IC1009 D-6 (Page 90) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 88 88 CN1004 Q1006 IC1005 Q1005 C1009 C1016 C1015 C1011 C1005 C1014 C1019 C1003 C1002 C1004 C1042 D1002 CN1005 R1031 R1032 R1040 R1026 R1024 R1039 R1038 R1001 R1017 R1022 R1009 R1007 R1006 R1004 R1003 R1005 R1010 R1002 R1025 R1085 R1086 R1087 R1088 R1089 R1090 R1091 R1092 R1093 R1094 R1095 R1096 R1097 R1098 R1078 R1079 R1037 R1023 R1045 R1044 R1036 R1035 R1015 R1016 R1020 R1014 R1018 R1019 R1011 R1013 R1012 R1050 R1074 R1076 R1077 R1058 R1080 R1043 C1041 C1017 X1001 IC1008 IC1009 IC1006 R1021 IC1003 IC1004 CL1000 R1041 8P DTA144EKA-T146 NJM2406F-TE2 2SB709A-QRS-TX 1 0.01 0.01 0.01 0.01 0.01 100p 0.001 0.01 0.001 0.1 RB705D-T146 19P 10k 10k 10k 10k 10k 10k 10k 47k 0 0 100k 3.3k 1k 22k 22k 10k 2.2k 0 10k 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 10k 10k 33 120 10k 10k 100 100 10k 10k 100 100 0 0 0 0 100 47k 100 10k 100k 0 47 6.3V 47 6.3V 5MHz PST9127NL PST9127NL S-80827CNUA-B8MT 47 -S05-JBT-A µPD70F3259YGF NJL74H400A 1 Z1 Z2 Z3 Z4 Z5 KEY0 KEY1 JOG-A JOG-B KEY2 KEY3 LED0 LED1 LED2 LED3 LED4 LED5 LED6 V-MUTE A-MUTE V-OFF FLDSDATA FLDSCLK FLDRST FLDCS SYSCONCS SYSCONBUSY SYSCONRST KEY0 KEY1 SLINK P-CONT KBCIN KBDIN KBCOUT KBDOUT SO0 SI0 SC0 KEY4 PON_CHECK SIRCS_MODE SIRCS_MODE PON_CHECK SI0 SO0 SC0 GND IFRST P-CONT A-MUTE V-MUTE V-OFF GND SLINK GND TX RX SYSCONCS SYSCONBUSY SYSCONRST IFRST TX RX GND RX IFRST P-CONT GND VDD VPP RESET 2PIN CLK OUT IN XFRRST XIFBUSY XIFCS SI0 SO0 SCO GND IFRST P-CONT A-MUTE V-MUTE GND RX TX GND SIRCS_MODE SLINK V-OFF NC SUB GND VCC VOUT NC SUB GND VCC VOUT VOUT VCC GND KEY1 KEY0 AVDD AVSS NC NC AVREF JOG-A JOG-B FLMD0 VDD REGC VSS RESET XT1 XT2 NC 232C_INT DEBUGRST SYSCONCS SYSCONSIN SYSCONSOUT SYSCONSCLK 232COUT NC 232CIN KEY2 KEY3 KEY4 SELF_CHECK MODEL_SEL PON_CHECK NO_USE SIRCS_MODE NC NC LED6 LED5 NC NC NC NC NC NC NC FL_CTRL NC NC NC NC VIDEO_OFF FLDSDATA FLDSCLK KBCIN KBDIN SIRCS-WAKE FLDRST FLDCS FLHS CLKOUT NC KBCOUT KBDOUT AMUTE VMUTE P_CONT BVSS BVDD LED0 LED1 LED2 LED3 LED4 FLMD1 NC NC SIRCS CONTROL_S SYSCONBUSY SYSCONRST EVSS EVDD NC NC NC NC NC NC NC NC NC NC NC NC NC NC (1/2) X1 X2 KEY_INT NC KEY INPUT DETECT KEY INPUT DETECT GENERATOR RESET SIGNAL Q1005,1006 SIRCS BUFFER SIRCS BUFFER VCC REMOTE CONTROL RECEIVER PON_CHECK(3.3V_MNT) (NC) G INTERFACE CONTROLLER 7-38. SCHEMATIC DIAGRAM – PANEL-L Board (1/2) – • See page 94 for Waveform. (Page 58) (Page 89) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 89 89 7-39. SCHEMATIC DIAGRAM – PANEL-L Board (2/2) – • See page 98 for IC Block Diagram. Q1001 Q1002 Q1083 Q1071 C1031 C1032 C1034 C1033 C1035 D1012 C1036 D1014 CN1002 C1083 C1089 C1088 C1087 C1082 D1082 D1084 D1081 D1083 IC1007 FB1001 Q1081 Q1082 CN1001 Q1011 Q1012 Q1013 R1067 Q1014 Q1015 R1046 R1047 R1082 R1081 R1069 R1028 R1029 R1084 R1083 R1071 R1073 R1061 R1062 R1063 R1051 R1052 R1053 R1054 R1055 R1056 R1057 R1064 R1065 R1060 R1099 C1081 C1052 C1085 D1086 D1085 FL1001 CN1003 Q1017 Q1016 D1015 D1013 T1081 C1086 D1011 S1008 S1009 S1007 S1006 S1005 S1002 S1004 S1001 S1003 DTC114EKA -T146 DTC114EKA -T146 2SB1122-ST-TD L1082 47µH 2SC2412K 0.1 0.1 0.1 0.1 0.1 CL-191WA -D-T 39p SEL5821A -TP15 9P 0.1 0.1 0.1 0.1 0.01 100V MA113-(TX) MA113-(TX) MA113-(TX) MA113-(TX) L1081 47µH MSM9201-04GS-K 0 2SD1622 -S-TD 2SD1622 -S-TD 7P DTC114EKA -T146 DTC114EKA -T146 DTC114EKA -T146 3.3k DTC114EKA -T146 DTC114EKA -T146 4.7k 4.7k 6.8k 6.8k 0 22 22 10k 3.9k 100 47k 100 560 100 1k 2.2k 2.2k 4.7k 10k 22k 2.2k 150 150 0 3.3k 22 50V 47 6.3V 22 50V UDZS-TE-17 -6.2B UDZS-TE-17 -30B 4P DTC114EKA-T146 DTC114EKA-T146 SEL5821A -TP15 SELU5E23C -PTP15 22 50V SELU5E23C -PTP15 Z1 Z2 Z3 Z4 Z5 P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 1G 2G 3G 4G 5G 6G 7G 8G 9G 10G 11G 12G 13G 14G 15G FLDRST FLDCS FLDSCLK FLDSDATA LED0 LED1 LED2 KBDIN KBCIN KBDOUT KBCOUT LED3 LED4 LED6 LED5 KEY1 KEY3 KEY4 JOG-A JOG-B KEY0 KEY2 1G 2G 3G 4G 5G 6G 7G 8G 9G 10G 11G 12G 13G 14G 15G P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 EVER+5V GND SW+5V P-CONT SW-GND SW+5V KEYBORAD_DATA KEYBOARD_CLK GND KEY3 KEY4 LED5(DISC-CHANGE) LED6(DIRECT-SEARCH) SW+5V GND KEY1 JOG-A JOG-B EVER+3.3V NC NC NC NC NC NC NC NC NC VDISP2 VFL2 VDD OOSC1 OSC0 GND VFL1 DA RESET CP CS P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 NC NC 14G 13G 12G 11G 10G 9G 8G 7G 6G 5G 4G 3G 2G 1G NC NC NC NC NC NC NC NC VDISP1 16G 15G NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC F1 F1 F1 1G 2G 3G 4G 5G 6G 7G 8G 9G 10G 11G 12G 13G 14G 15G 16G NC NC NC P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 F2 F2 F2 (2/2) LED DRIVE LED DRIVE LED SHIFT LEVEL SHIFT SW-11V(FL) LED DRIVE VIDEO OFF FL OFF MULTI CHANNEL LED DRIVE LED DRIVE OSC OSC GRID DRIVE DC/DC CONVERTER FLUORESCENT INDICATOR TUBE REGULATOR -30V Q1083 SACD PROGRESSIVE LOAD 1/ALL DISC FOLDER VIDEO OFF SURROUND VIDEO CONTROL TIME/TEXT FL OFF S1007 S1003 FLUORESCENT INDICATOR TUBE DRIVER LED DRIVE LED DRIVE (Page 88) (Page 85) (Page 91) (Page 91) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 90 90 7-40. PRINTED WIRING BOARDS – PANEL Section – • See page 56 for Circuit Boards Location. :Uses unleaded solder. JW1101 JW1102 LP1101 JW1103 LP1102 S1108 S1107 S1103 S1102 S1101 S1110 S1111 S1112 S1104 S1105 S1106 S1109 D1101 RE1101 JG1101 CN1101 D1102 R1102 R1103 R1104 R1105 R1106 R1107 R1108 R1109 R1110 R1111 R1112 R1113 R1114 R1115 R1117 R1116 R1118 R1101 JW821 L823 L822 CNP503 L821 C823 L824 J821 C822 C821 CNP504 D801 C801 R801 PANEL-R BOARD 1-688-445- 11 (11) 1 9 PANEL-L BOARD CN1102 R OPEN/CLOSE DISC EJECT TOP MENU MENU 1 2 3 4 8 7 5 6 PUSH ENTER DISPLAY RETURN 5 4 1 3 ROTARY ENCODER DISC AMS PUSH ENTER +100 DISC CHANGE D1101, S1111 DIRECT SEARCH D1102, S1112 S1101 – 1112 KEY BOARD 1-688-454- 11 (11) 2 4 6 5 3 1 PANEL-L BOARD CN1103 S 1 2 1-688-449- 11 (11) LED BOARD MB BOARD CN105 E (ILLUMINATION) KEYBOARD (Page 86) (Page 87) (Page 72) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 91 91 R1118 R1101 R1102 S1106 R1104 R1105 R1103 R1107 R1106 R1108 R1109 R1117 R1116 R1114 S1110 S1109 S1108 S1107 R1110 R1111 R1112 R1113 R1115 JG1101 S1101 S1102 S1103 S1105 S1104 D1101 D1102 S1111 S1112 RE1101 CN1101 D801 CNP503 C801 C821 C822 C823 L821 L823 L822 L824 CNP504 R801 J821 3.3k 2.2k 4.7k 2.2k 2.2k 1k 10k 4.7k 22k 47k 150 150 10k 1k 2.2k 2.2k 4.7k 22k SEL5821A -TP15 SEL5521C -TP15 9P SELU5E23C-PTP15 4P 0.1 0.1 0.1 470 10V 2P 47 KEY3 KEY4 LED5(DISC-CHANGE) LED6(DIRECT-SEARCH) SW+5V GND KEY1 JOG-A JOG-B A B C D ENTER COM 3 6 8 2 4 5 PUSH ENTER OPEN/CLOSE DISC EJECT TOP MENU DISPLAY MENU DISC CHANGE DIRECT SEARCH RETURN +100 DISC CHANGE DIRECT SEARCH ROTARY ENCODER DISC AMS PUSH ENTER GND KEYBOARD SW+5V KEYBOARD_CLK KEYBOARD_DATA (ILLUMINATION) 7-41. SCHEMATIC DIAGRAM – PANEL Section – (Page 89) (Page 89) (Page 58) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 92 92 7-42. PRINTED WIRING BOARD – POWER Board – • See page 56 for Circuit Boards Location. J20 IC301 IC101 R301 R306 R303 C116 R304 R302 R104 R211 R213 R212 Q202 Q502 C403 IC401 1 1 3 2 3 (CHASSIS) T101 MAIN POWER TRANSFORMER L102 LINE FILTER L101 LINE FILTER T102 SUB POWER TRANSFORMER 1 3 AV BOARD CN204 P 1 2 1 2 (AC IN) (CHASSIS) POWER BOARD S G D E E E C B G D S 3 1 4 5 Q302 C307 R308 R309 E (CHASSIS) A B C D E F 1 2 3 4 5 6 IC302 4 AV BOARD CN205 N (CHASSIS) • Semiconductor Location Ref. No. Location D101 E-4 D102 F-4 D103 F-4 D104 F-3 D106 E-3 D107 E-2 D108 E-2 D211 D-2 D212 C-2 D213 B-2 D301 D-2 D302 B-4 D303 B-4 D304 B-4 D305 D-2 D307 A-3 D308 B-4 D501 D-3 D502 D-3 IC101 E-2 IC301 D-1 IC302 C-3 IC401 A-4 PC101 E-2 Q201 B-2 Q202 B-2 Q301 A-4 Q302 B-4 Q501 B-3 Q502 B-2 (Page 80) (Page 81) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 93 93 Q201 C109 R101 C102 CN101 C116 R104 C114 IC101 C113 C107 C108 D101 D102 D103 D104 L104 C110 R103 D107 D211 D501 R301 R302 R303 C303 C302 VR301 R304 C304 R309 Q301 Q302 Q202 R212 R211 C212 D212 D213 R213 R501 R502 C505 C503 C502 C504 Q501 Q502 IC401 C402 C306 C403 D304 D303 D302 C309 C308 IC302 D308 CN201 C307 FG002 FG003 FG004 D301 D305 D307 R308 R306 IC301 T101 R102 R105 D106 D108 L101 L102 C103 C104 F101 FG001 C301 C101 PC101 P501 P502 P301 D502 RL101 CN102 2SJ525 100p 1kV 2.2M 1/2W 0.1 2P 0.47 47 47 35V MIP2E5DMY 1000p 250V 120 200V 1000p 1kV IN4005L IN4005L IN4005L IN4005L 10 50V 10 D1NL20U D2L20U L211 20µH L502 20µH L503 20µH L301 3.7µH D2L20U 100 1k 6.8k 1 50V 10 50V 4.7K 10k 100 16V 1k 2SJ525 2SC2412 2SC2412 1k 10k 330 25V MA2330 ISS113 2.2k 10k 820 47 35V 47 35V 220 25V 220 25V 2SD1862 DTA143EKA PQ1X331M2ZP 47 35V 220 10V 0.1 1N4005L 1N4005L 1N4005L 47 35V 47 35V PQ3RD13 1SS113 13P 0.1 S3L20U S3L20U 11EQS04 10k 10k AN1431 100k 1W 47 1W SARS01 MTZ7.5 100p 250V 100p 250V 2A 250V 1000 10V 0.1 QN3171 D1NL20U 2P P-CONT EVER-11V SW-11V GND GND SW+3.3V SW+5V SW+11V SW+11V S D C GND(M) GND(M) EVER+3.3V EVER+5V (CHASSIS) (CHASSIS) (CHASSIS) VIN VO GND VC +3.3V REGULATOR B+ SWITCH Q501,502 B- SWITCH Q201,202 S S B+ SWITCH Q301,302 VIN GND VC VO NR SHUNT REGULATOR MAIN POWER TRANSFORMER LINE FILTER LINE FILTER (CHASSIS) (AC IN) +3.3V REGULATOR SWITCHING ISOLATOR T102 SUB POWER TRANSFOEMER 7-43. SCHEMATIC DIAGRAM – POWER Board – The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. (Page 85) (Page 85) w w w . x i a o y u 1 6 3 . c o m Q Q 3 7 6 3 1 5 1 5 0 9 9 2 8 9 4 2 9 8 T E L 1 3 9 4 2 2 9 6 5 1 3 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES 94 94 4 Vp-p 37 ns Approx. 1.5 Vp-p Approx. 560 mVp-p Approx. 140 mVp-p Approx. 1.7 Vp-p Approx. 1.4 Vp-p Approx. 600 mVp-p Approx. 880 mVp-p • Waveforms – MB Board – 1 IC201 1 (RFIP) (DVD Play Mode) 1 IC201 1 (RFIP) (CD Play Mode) 2 IC201 ra (TE) (DVD Play Mode) 3 IC201 rs (FE) (DVD Play Mode) 2 IC201 ra (TE) (CD Play Mode) 3 IC201 rs (FE) (CD Play Mode) 4 IC201 tl (SIGO) (DVD Play Mode) 5 IC301 C102 1-126-204-11 ELECT CHIP 47uF 20% 16V C103 1-126-204-11 ELECT CHIP 47uF 20% 16V C104 1-126-204-11 ELECT CHIP 47uF 20% 16V C105 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V C106 1-126-204-11 ELECT CHIP 47uF 20% 16V C107 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V C108 1-126-204-11 ELECT CHIP 47uF 20% 16V C109 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V C201 1-127-694-11 ELECT 47uF 20% 25V C204 1-126-767-11 ELECT 1000uF 20% 16V C205 1-126-193-11 ELECT CHIP 1uF 20% 50V C206 1-126-193-11 ELECT CHIP 1uF 20% 50V C209 1-126-193-11 ELECT CHIP 1uF 20% 50V C210 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C211 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V C212 1-127-694-11 ELECT 47uF 20% 25V C213 1-130-478-00 MYLAR 0.0039uF 5% 50V C214 1-130-478-00 MYLAR 0.0039uF 5% 50V C215 1-130-478-00 MYLAR 0.0039uF 5% 50V C216 1-130-478-00 MYLAR 0.0039uF 5% 50V C217 1-130-478-00 MYLAR 0.0039uF 5% 50V C218 1-130-478-00 MYLAR 0.0039uF 5% 50V C219 1-130-478-00 MYLAR 0.0039uF 5% 50V C220 1-136-811-11 FILM 330PF 5% 100V C221 1-136-811-11 FILM 330PF 5% 100V C222 1-136-356-11 FILM 470PF 5% 100V C223 1-136-811-11 FILM 330PF 5% 100V C224 1-136-811-11 FILM 330PF 5% 100V C225 1-136-811-11 FILM 330PF 5% 100V C226 1-136-811-11 FILM 330PF 5% 100V C227 1-136-811-11 FILM 330PF 5% 100V C228 1-136-818-11 FILM 0.0047uF 5% 100V C229 1-136-818-11 FILM 0.0047uF 5% 100V C230 1-136-818-11 FILM 0.0047uF 5% 100V C231 1-136-356-11 FILM 470PF 5% 100V C232 1-136-818-11 FILM 0.0047uF 5% 100V C233 1-136-811-11 FILM 330PF 5% 100V NOTE: • Due to standardization, replacements in the parts list may be different from the parts speci- fied in the diagrams or the components used on the set. • -XX and -X mean standardized parts, so they may have some difference from the original one. • RESISTORS All resistors are in ohms. METAL: Metal-film resistor. METAL OXIDE: Metal oxide-film resistor. F: nonflammable • Items marked “*” are not stocked since they are seldom required for routine service. Some delay should be anticipated when order- ing these items. • SEMICONDUCTORS In each case, u: µ, for example: uA. . : µA. . uPA. . : µPA. . uPB. . : µPB. . uPC. . : µPC. . uPD. . : µPD. . • CAPACITORS uF: µF • COILS uH: µH C234 1-136-818-11 FILM 0.0047uF 5% 100V C235 1-136-811-11 FILM 330PF 5% 100V C236 1-136-818-11 FILM 0.0047uF 5% 100V C237 1-136-811-11 FILM 330PF 5% 100V C238 1-136-818-11 FILM 0.0047uF 5% 100V C239 1-136-811-11 FILM 330PF 5% 100V C240 1-136-811-11 FILM 330PF 5% 100V C241 1-136-811-11 FILM 330PF 5% 100V C242 1-136-811-11 FILM 330PF 5% 100V C243 1-127-694-11 ELECT 47uF 20% 25V C244 1-127-694-11 ELECT 47uF 20% 25V C245 1-127-694-11 ELECT 47uF 20% 25V C246 1-127-694-11 ELECT 47uF 20% 25V C247 1-127-694-11 ELECT 47uF 20% 25V C248 1-127-694-11 ELECT 47uF 20% 25V C249 1-127-694-11 ELECT 47uF 20% 25V C250 1-127-694-11 ELECT 47uF 20% 25V C251 1-136-850-11 MYLAR 0.1uF 5% 63V C252 1-128-200-11 ELECT 47uF 20% 50V C253 1-136-850-11 MYLAR 0.1uF 5% 63V C254 1-128-200-11 ELECT 47uF 20% 50V C255 1-136-850-11 MYLAR 0.1uF 5% 63V C256 1-128-200-11 ELECT 47uF 20% 50V C257 1-128-200-11 ELECT 47uF 20% 50V C258 1-136-850-11 MYLAR 0.1uF 5% 63V C259 1-128-200-11 ELECT 47uF 20% 50V C260 1-136-850-11 MYLAR 0.1uF 5% 63V C261 1-128-200-11 ELECT 47uF 20% 50V C262 1-136-850-11 MYLAR 0.1uF 5% 63V C263 1-128-200-11 ELECT 47uF 20% 50V C264 1-136-850-11 MYLAR 0.1uF 5% 63V C265 1-136-850-11 MYLAR 0.1uF 5% 63V C266 1-128-200-11 ELECT 47uF 20% 50V C267 1-137-605-11 MYLAR 0.00022uF 5% 50V C268 1-137-605-11 MYLAR 0.00022uF 5% 50V C269 1-137-605-11 MYLAR 0.00022uF 5% 50V C270 1-137-605-11 MYLAR 0.00022uF 5% 50V C271 1-137-605-11 MYLAR 0.00022uF 5% 50V C272 1-137-605-11 MYLAR 0.00022uF 5% 50V C273 1-137-605-11 MYLAR 0.00022uF 5% 50V C274 1-137-605-11 MYLAR 0.00022uF 5% 50V C279 1-126-947-11 ELECT 47uF 20% 16V C280 1-126-947-11 ELECT 47uF 20% 16V Les composants identifiés par une marque 0 sont critiquens pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified. When indicating parts by reference number, please include the board. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 140 DVP-CX777ES AV C281 1-126-947-11 ELECT 47uF 20% 16V C283 1-136-817-11 FILM 0.0033uF 5% 100V C301 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C303 1-119-800-11 ELECT 100uF 20% 10V C304 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C305 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C306 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C307 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C308 1-136-850-11 MYLAR 0.1uF 5% 63V C309 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C310 1-119-800-11 ELECT 100uF 20% 10V C311 1-135-781-51 ELECT 2200uF 35V C313 1-119-800-11 ELECT 100uF 20% 10V C314 1-135-748-11 ELECT 4700uF 35V C316 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C319 1-119-800-11 ELECT 100uF 20% 25V C320 1-119-800-11 ELECT 100uF 20% 10V C321 1-100-398-21 ELECT 270uF 20% 10V C322 1-127-694-11 ELECT 47uF 20% 25V C323 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C324 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C325 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C326 1-136-814-11 FILM 0.001uF 5% 100V C327 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V C328 1-136-850-11 MYLAR 0.1uF 5% 63V C329 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C330 1-100-398-21 ELECT 270uF 20% 10V C331 1-127-694-11 ELECT 47uF 20% 25V C332 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V C333 1-136-850-11 MYLAR 0.1uF 5% 63V C334 1-135-667-11 ELECT 220uF 10V C335 1-162-962-11 CERAMIC CHIP 470PF 10% 50V C336 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C337 1-164-004-11 CERAMIC CHIP 0.1uF 10% 25V C338 1-136-850-11 MYLAR 0.1uF 5% 63V C339 1-126-204-11 ELECT CHIP 47uF 20% 16V C340 1-127-694-11 ELECT 47uF 20% 25V C341 1-117-681-11 ELECT CHIP 100uF 20% 16V C342 1-117-681-11 ELECT CHIP 100uF 20% 16V C343 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C344 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V < CONNECTOR > CN201 1-573-806-21 PIN, CONNECTOR (1.5mm) (SMD) 6P CN202 1-784-834-21 CONNECTOR, FFC (LIF (NON-ZIF)) 23P CN203 1-784-835-21 CONNECTOR, FFC (LIF (NON-ZIF)) 27P CN204 1-785-101-11 PIN, CONNECTOR (3.96mm PITCH) 3P CN205 1-815-954-21 PIN, CONNECTOR (PC BOARD) 13P CN206 1-764-177-11 PIN, CONNECTOR (SMD) (1.5mm) 7P CN207 1-794-509-11 PIN, CONNECTOR (PC BOARD) (3P) CN208 1-785-728-21 PIN (PC BOARD) , CONNECTOR 7P < DIODE > D101 8-719-053-18 DIODE 1SR154-400TE-25 D102 8-719-053-18 DIODE 1SR154-400TE-25 D103 8-719-071-15 DIODE HZM6.8ZWA1TL D104 8-719-071-15 DIODE HZM6.8ZWA1TL D105 8-719-071-15 DIODE HZM6.8ZWA1TL D106 8-719-071-15 DIODE HZM6.8ZWA1TL D201 8-719-914-43 DIODE DAN202K D301 8-719-210-39 DIODE EC10QS-04 D302 8-719-210-39 DIODE EC10QS-04 D303 8-719-210-39 DIODE EC10QS-04 D304 8-719-210-39 DIODE EC10QS-04 D305 8-719-988-61 DIODE 1SS355TE-17 D306 8-719-988-61 DIODE 1SS355TE-17 D307 8-719-914-44 DIODE DAP202K D308 8-719-988-61 DIODE 1SS355TE-17 D309 8-719-988-61 DIODE 1SS355TE-17 D310 8-719-025-29 DIODE 02CZ5.1-TE85L D311 8-719-025-47 DIODE 02CZ12-TE85L < EARTH TERMINAL > * G201 1-537-738-21 TERMINAL, EARTH * G301 1-537-738-21 TERMINAL, EARTH < IC > IC102 6-701-820-01 IC LA73053-TLM-E IC201 8-759-052-52 IC L78M05T-FA IC202 8-759-447-30 IC NJM2114M-TE2 IC203 8-759-447-30 IC NJM2114M-TE2 IC204 8-759-447-30 IC NJM2114M-TE2 IC205 8-759-447-30 IC NJM2114M-TE2 IC206 6-600-011-01 IC TOTX179L (DIGITAL OUT PCM/DTS/DOLBY DIGITAL OPTICAL) IC301 6-700-398-01 IC uPC2918T-E1 IC302 8-759-711-85 IC NJM4580E-D IC303 8-759-711-85 IC NJM4580E-D < JACK > J101 1-694-484-11 TERMINAL, S (2P.V) (S VIDEO OUT) J102 1-817-553-11 JACK, PIN 3P (COMPONENT VIDEO OUT) J103 1-793-475-11 JACK, PIN 2P (LINE OUT VIDEO) J104 1-793-344-21 JACK, PIN 4P (LINE OUT AUDIO) J201 1-793-524-11 JACK, PIN 4P (5.1CH OUTPUT FRONT/REAR) J202 1-785-795-11 JACK, PIN 2P (5.1CH OUTPUT CENTER/WOOFER) J301 1-784-432-11 JACK, PIN 1P (DIGITAL OUT PCM/DTS/DOLBY DIGITAL COAXIAL) < COIL > L101 1-412-060-11 INDUCTOR 22uH L102 1-412-060-11 INDUCTOR 22uH L201 1-419-387-21 INDUCTOR 100uH < IC LINK > PS302 1-532-637-00 LINK, IC < TRANSISTOR > Q104 8-729-421-19 TRANSISTOR UN2213 Q105 8-729-424-08 TRANSISTOR UN2111 Q204 8-729-421-19 TRANSISTOR UN2213 Q205 8-729-421-19 TRANSISTOR UN2213 Q206 8-729-421-19 TRANSISTOR UN2213 Q207 8-729-027-53 TRANSISTOR DTC124TKA-T146 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 141 DVP-CX777ES Q208 8-729-027-53 TRANSISTOR DTC124TKA-T146 Q209 8-729-027-53 TRANSISTOR DTC124TKA-T146 Q210 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX Q211 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX Q212 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX Q213 8-729-046-97 TRANSISTOR 2SD1938 (F) -T (TX).SO Q214 8-729-046-97 TRANSISTOR 2SD1938 (F) -T (TX).SO Q215 8-729-046-97 TRANSISTOR 2SD1938 (F) -T (TX).SO Q216 8-729-046-97 TRANSISTOR 2SD1938 (F) -T (TX).SO Q217 8-729-046-97 TRANSISTOR 2SD1938 (F) -T (TX).SO Q218 8-729-046-97 TRANSISTOR 2SD1938 (F) -T (TX).SO Q219 8-729-046-97 TRANSISTOR 2SD1938 (F) -T (TX).SO Q220 8-729-046-97 TRANSISTOR 2SD1938 (F) -T (TX).SO Q221 8-729-230-49 TRANSISTOR 2SC2712-YG Q301 6-550-543-01 TRANSISTOR 2SD1766FT100QR Q302 8-729-424-08 TRANSISTOR UN2111 Q303 8-729-052-94 TRANSISTOR 2SA1930 Q304 8-729-052-94 TRANSISTOR 2SA1930 Q305 8-729-052-95 TRANSISTOR 2SC5171 Q306 8-729-052-95 TRANSISTOR 2SC5171 Q307 8-729-421-19 TRANSISTOR UN2213 Q308 8-729-230-49 TRANSISTOR 2SC2712-YG Q309 8-729-421-19 TRANSISTOR UN2213 Q310 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX Q311 8-729-224-62 FET 2SK246-GR Q312 8-729-224-62 FET 2SK246-GR < RESISTOR > R101 1-216-864-11 SHORT CHIP 0 R103 1-216-864-11 SHORT CHIP 0 R106 1-216-864-11 SHORT CHIP 0 R108 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R109 1-216-864-11 SHORT CHIP 0 R110 1-216-833-11 METAL CHIP 10K 5% 1/10W R111 1-216-021-00 METAL CHIP 68 5% 1/10W R112 1-216-021-00 METAL CHIP 68 5% 1/10W R113 1-216-021-00 METAL CHIP 68 5% 1/10W R114 1-216-021-00 METAL CHIP 68 5% 1/10W R115 1-216-021-00 METAL CHIP 68 5% 1/10W R116 1-216-021-00 METAL CHIP 68 5% 1/10W R117 1-216-021-00 METAL CHIP 68 5% 1/10W R118 1-216-021-00 METAL CHIP 68 5% 1/10W R119 1-216-021-00 METAL CHIP 68 5% 1/10W R129 1-216-821-11 METAL CHIP 1K 5% 1/10W R130 1-216-821-11 METAL CHIP 1K 5% 1/10W R131 1-216-821-11 METAL CHIP 1K 5% 1/10W R132 1-216-864-11 SHORT CHIP 0 R133 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R134 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R135 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R142 1-216-833-11 METAL CHIP 10K 5% 1/10W R143 1-216-833-11 METAL CHIP 10K 5% 1/10W R144 1-216-833-11 METAL CHIP 10K 5% 1/10W R145 1-216-864-11 SHORT CHIP 0 R148 1-216-841-11 METAL CHIP 47K 5% 1/10W R149 1-216-833-11 METAL CHIP 10K 5% 1/10W R150 1-216-841-11 METAL CHIP 47K 5% 1/10W R151 1-216-833-11 METAL CHIP 10K 5% 1/10W R152 1-216-841-11 METAL CHIP 47K 5% 1/10W R153 1-216-833-11 METAL CHIP 10K 5% 1/10W R154 1-216-864-11 SHORT CHIP 0 R155 1-216-833-11 METAL CHIP 10K 5% 1/10W R156 1-216-833-11 METAL CHIP 10K 5% 1/10W R157 1-216-833-11 METAL CHIP 10K 5% 1/10W R158 1-216-864-11 SHORT CHIP 0 R160 1-208-785-11 METAL CHIP 1.3K 0.5% 1/10W R161 1-208-785-11 METAL CHIP 1.3K 0.5% 1/10W R162 1-216-649-11 METAL CHIP 820 0.5% 1/10W R163 1-216-649-11 METAL CHIP 820 0.5% 1/10W R164 1-216-649-11 METAL CHIP 820 0.5% 1/10W R165 1-216-649-11 METAL CHIP 820 0.5% 1/10W R166 1-216-649-11 METAL CHIP 820 0.5% 1/10W R167 1-216-649-11 METAL CHIP 820 0.5% 1/10W R168 1-216-649-11 METAL CHIP 820 0.5% 1/10W R169 1-216-649-11 METAL CHIP 820 0.5% 1/10W R170 1-216-649-11 METAL CHIP 820 0.5% 1/10W R171 1-216-649-11 METAL CHIP 820 0.5% 1/10W R172 1-216-649-11 METAL CHIP 820 0.5% 1/10W R173 1-216-649-11 METAL CHIP 820 0.5% 1/10W R174 1-216-649-11 METAL CHIP 820 0.5% 1/10W R175 1-216-649-11 METAL CHIP 820 0.5% 1/10W R176 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R177 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R178 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R179 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R180 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R181 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R182 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R183 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R184 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R185 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R186 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R187 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R188 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R189 1-208-782-11 METAL CHIP 1K 0.5% 1/10W R190 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R191 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R192 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R193 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R194 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R195 1-208-800-11 METAL CHIP 5.6K 0.5% 1/10W R196 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R197 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R198 1-216-649-11 METAL CHIP 820 0.5% 1/10W R199 1-216-649-11 METAL CHIP 820 0.5% 1/10W R200 1-216-649-11 METAL CHIP 820 0.5% 1/10W R201 1-216-649-11 METAL CHIP 820 0.5% 1/10W R202 1-216-649-11 METAL CHIP 820 0.5% 1/10W R203 1-216-649-11 METAL CHIP 820 0.5% 1/10W R204 1-216-649-11 METAL CHIP 820 0.5% 1/10W R205 1-216-649-11 METAL CHIP 820 0.5% 1/10W R206 1-216-649-11 METAL CHIP 820 0.5% 1/10W R207 1-216-649-11 METAL CHIP 820 0.5% 1/10W R208 1-208-800-11 METAL CHIP 5.6K 0.5% 1/10W R209 1-216-649-11 METAL CHIP 820 0.5% 1/10W AV www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 142 DVP-CX777ES AV D.SENS IN D.SENS OUT DOOR MOTOR DOOR SW R210 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R211 1-216-649-11 METAL CHIP 820 0.5% 1/10W R212 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R213 1-216-649-11 METAL CHIP 820 0.5% 1/10W R214 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R215 1-216-649-11 METAL CHIP 820 0.5% 1/10W R216 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R217 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R218 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R219 1-208-790-11 METAL CHIP 2.2K 0.5% 1/10W R220 1-208-822-11 METAL CHIP 47K 0.5% 1/10W R221 1-208-822-11 METAL CHIP 47K 0.5% 1/10W R222 1-208-822-11 METAL CHIP 47K 0.5% 1/10W R223 1-208-822-11 METAL CHIP 47K 0.5% 1/10W R224 1-208-822-11 METAL CHIP 47K 0.5% 1/10W R225 1-208-822-11 METAL CHIP 47K 0.5% 1/10W R226 1-208-822-11 METAL CHIP 47K 0.5% 1/10W R227 1-208-822-11 METAL CHIP 47K 0.5% 1/10W R228 1-208-774-11 METAL CHIP 470 0.5% 1/10W R229 1-208-774-11 METAL CHIP 470 0.5% 1/10W R230 1-208-774-11 METAL CHIP 470 0.5% 1/10W R231 1-208-774-11 METAL CHIP 470 0.5% 1/10W R232 1-208-774-11 METAL CHIP 470 0.5% 1/10W R233 1-208-774-11 METAL CHIP 470 0.5% 1/10W R234 1-208-774-11 METAL CHIP 470 0.5% 1/10W R235 1-208-774-11 METAL CHIP 470 0.5% 1/10W R236 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R237 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R238 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R239 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R240 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R241 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R242 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R243 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R244 1-216-845-11 METAL CHIP 100K 5% 1/10W R245 1-216-845-11 METAL CHIP 100K 5% 1/10W R246 1-216-845-11 METAL CHIP 100K 5% 1/10W R247 1-208-758-11 METAL CHIP 100 0.5% 1/10W R248 1-208-758-11 METAL CHIP 100 0.5% 1/10W R249 1-208-758-11 METAL CHIP 100 0.5% 1/10W R250 1-208-758-11 METAL CHIP 100 0.5% 1/10W R251 1-208-758-11 METAL CHIP 100 0.5% 1/10W R252 1-208-758-11 METAL CHIP 100 0.5% 1/10W R253 1-208-758-11 METAL CHIP 100 0.5% 1/10W R254 1-208-758-11 METAL CHIP 100 0.5% 1/10W R255 1-208-758-11 METAL CHIP 100 0.5% 1/10W R256 1-208-758-11 METAL CHIP 100 0.5% 1/10W R257 1-216-821-11 METAL CHIP 1K 5% 1/10W R258 1-216-821-11 METAL CHIP 1K 5% 1/10W R259 1-216-821-11 METAL CHIP 1K 5% 1/10W R260 1-216-033-00 METAL CHIP 220 5% 1/10W R261 1-216-021-00 METAL CHIP 68 5% 1/10W R262 1-216-833-11 METAL CHIP 10K 5% 1/10W R264 1-216-833-11 METAL CHIP 10K 5% 1/10W R265 1-208-794-11 METAL CHIP 3.3K 0.5% 1/10W R266 1-208-794-11 METAL CHIP 3.3K 0.5% 1/10W R267 1-208-794-11 METAL CHIP 3.3K 0.5% 1/10W R269 1-216-864-11 SHORT CHIP 0 R271 1-208-822-11 METAL CHIP 47K 0.5% 1/10W R273 1-208-822-11 METAL CHIP 47K 0.5% 1/10W R274 1-216-025-11 RES-CHIP 100 5% 1/10W R275 1-208-794-11 METAL CHIP 3.3K 0.5% 1/10W R276 1-208-758-11 METAL CHIP 100 0.5% 1/10W R277 1-208-794-11 METAL CHIP 3.3K 0.5% 1/10W R278 1-208-794-11 METAL CHIP 3.3K 0.5% 1/10W R279 1-208-794-11 METAL CHIP 3.3K 0.5% 1/10W R280 1-216-821-11 METAL CHIP 1K 5% 1/10W R281 1-216-833-11 METAL CHIP 10K 5% 1/10W R282 1-216-025-11 RES-CHIP 100 5% 1/10W R283 1-208-758-11 METAL CHIP 100 0.5% 1/10W R284 1-216-839-11 METAL CHIP 33K 5% 1/10W R285 1-216-837-11 METAL CHIP 22K 5% 1/10W R287 1-216-841-11 METAL CHIP 47K 5% 1/10W R288 1-216-025-11 RES-CHIP 100 5% 1/10W R289 1-208-758-11 METAL CHIP 100 0.5% 1/10W R290 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R291 1-216-840-11 METAL CHIP 39K 5% 1/10W R292 1-208-820-11 METAL CHIP 39K 0.5% 1/10W R293 1-208-788-11 METAL CHIP 1.8K 0.5% 1/10W R294 1-208-788-11 METAL CHIP 1.8K 0.5% 1/10W R295 1-216-864-11 SHORT CHIP 0 < SWITCH > S101 1-692-989-11 SWITCH, SLIDE (SCAN SELECT) ************************************************************** 1-688-452-11 D.SENS IN BOARD *************** * 4-985-300-01 HOLDER (P-T) < PHOTO TRANSISTOR > Q81 8-729-921-53 PHOTO TRANSISTOR PT483F1 ************************************************************** 1-688-453-11 D.SENS OUT BOARD ***************** * 4-976-473-01 HOLDER (LED-S) < LED > D81 8-719-055-84 LED GL528VS1 (DISC DTETCT SENSOR) ************************************************************** 1-688-451-11 DOOR MOTOR BOARD ****************** ************************************************************** 1-688-450-11 DOOR SW BOARD *************** < SWITCH > S611 1-786-154-11 SWITCH, ROTARY (DOOR) S612 1-786-154-11 SWITCH, ROTARY (POP) ************************************************************** www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 143 DVP-CX777ES A-4733-705-A DRIVER BOARD, COMPLETE *********************** < CAPACITOR > C901 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C902 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C903 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C904 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C905 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C906 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C907 1-109-953-11 ELECT 2.2uF 20% 50V C908 1-164-005-11 CERAMIC CHIP 0.47uF 25V C909 1-164-005-11 CERAMIC CHIP 0.47uF 25V C910 1-164-005-11 CERAMIC CHIP 0.47uF 25V C911 1-165-319-11 CERAMIC CHIP 0.1uF 50V C913 1-165-319-11 CERAMIC CHIP 0.1uF 50V C914 1-126-947-11 ELECT 47uF 20% 25V C915 1-126-947-11 ELECT 47uF 20% 25V < CONNECTOR > CN901 1-573-806-21 PIN, CONNECTOR (1.5mm) (SMD) 6P * CN902 1-691-591-11 PIN, CONNECTOR (1.5mm) (SMD) 8P CN903 1-778-063-11 PIN, CONNECTOR (PC BOARD) 4P CN904 1-770-215-11 PIN, CONNECTOR (PC BOARD) 7P CN905 1-778-063-41 PIN, CONNECTOR (PC BOARD) 4P CN906 1-794-509-11 PIN, CONNECTOR (PC BOARD) (3P) < DIODE > D935 8-719-025-49 DIODE 02CZ15-TE85L < EARTH TERMINAL > * G901 1-537-738-21 TERMINAL, EARTH < IC > IC941 8-759-822-38 IC LA6510 IC961 8-759-822-38 IC LA6510 < TRANSISTOR > Q931 8-729-230-49 TRANSISTOR 2SC2712-YG Q941 8-729-424-18 TRANSISTOR UN2113 Q942 8-729-421-19 TRANSISTOR UN2213 Q951 8-729-424-18 TRANSISTOR UN2113 Q952 8-729-421-19 TRANSISTOR UN2213 < RESISTOR > R901 1-216-797-11 METAL CHIP 10 5% 1/10W R902 1-240-915-11 RES, CHIP 1 1% 1/10W R903 1-240-915-11 RES, CHIP 1 1% 1/10W R904 1-216-797-11 METAL CHIP 10 5% 1/10W R905 1-240-915-11 RES, CHIP 1 1% 1/10W R906 1-216-835-11 METAL CHIP 15K 5% 1/10W R907 1-240-915-11 RES, CHIP 1 1% 1/10W R908 1-216-835-11 METAL CHIP 15K 5% 1/10W R909 1-216-848-11 METAL CHIP 180K 5% 1/10W R910 1-218-291-11 METAL CHIP 16K 5% 1/10W R911 1-216-847-11 METAL CHIP 150K 5% 1/10W R912 1-216-847-11 METAL CHIP 150K 5% 1/10W R913 1-216-848-11 METAL CHIP 180K 5% 1/10W R914 1-216-848-11 METAL CHIP 180K 5% 1/10W R915 1-218-291-11 METAL CHIP 16K 5% 1/10W R916 1-216-849-11 METAL CHIP 220K 5% 1/10W R917 1-216-845-11 METAL CHIP 100K 5% 1/10W R918 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R919 1-240-915-11 RES, CHIP 1 1% 1/10W R920 1-240-915-11 RES, CHIP 1 1% 1/10W R921 1-216-847-11 METAL CHIP 150K 5% 1/10W R922 1-216-845-11 METAL CHIP 100K 5% 1/10W R923 1-216-821-11 METAL CHIP 1K 5% 1/10W R924 1-216-809-11 METAL CHIP 100 5% 1/10W R925 1-216-821-11 METAL CHIP 1K 5% 1/10W R926 1-216-845-11 METAL CHIP 100K 5% 1/10W R927 1-216-847-11 METAL CHIP 150K 5% 1/10W R928 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R929 1-240-915-11 RES, CHIP 1 1% 1/10W R930 1-240-915-11 RES, CHIP 1 1% 1/10W R931 1-216-845-11 METAL CHIP 100K 5% 1/10W R932 1-216-057-00 METAL CHIP 2.2K 5% 1/10W R933 1-216-809-11 METAL CHIP 100 5% 1/10W R934 1-216-057-00 METAL CHIP 2.2K 5% 1/10W R935 1-216-809-11 METAL CHIP 100 5% 1/10W R936 1-216-057-00 METAL CHIP 2.2K 5% 1/10W R937 1-216-057-00 METAL CHIP 2.2K 5% 1/10W ************************************************************** 1-688-454-11 KEY BOARD ********** < CAPACITOR > C821 1-164-156-11 CERAMIC CHIP 0.1uF 25V C822 1-164-156-11 CERAMIC CHIP 0.1uF 25V C823 1-126-935-11 ELECT 470uF 20% 10V < CONNECTOR > * CNP503 1-568-942-11 PIN, CONNECTOR 4P J821 1-785-945-11 CONNECTOR, DIN (KEYBOARD) < COIL > L821 1-424-122-11 FILTER, NOISE L822 1-424-122-11 FILTER, NOISE L823 1-424-122-11 FILTER, NOISE L824 1-424-122-11 FILTER, NOISE ************************************************************** A-4733-717-A LED BOARD, COMPLETE ******************** < CAPACITOR > C801 1-164-156-11 CERAMIC CHIP 0.1uF 25V < CONNECTOR > CNP504 1-785-328-11 PIN, CONNECTOR (LIGHT ANGRE) 2P < LED > D801 6-500-329-01 LED SELU5E23C-PTP15 (ILLUMINATION) DRIVER KEY LED www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 144 DVP-CX777ES < RESISTOR > R801 1-216-805-11 METAL CHIP 47 5% 1/10W ************************************************************** 1-688-447-11 LOADING MOTOR BOARD ********************* ************************************************************** 1-688-446-11 LOADING SW BOARD ***************** < SWITCH > S621 1-786-154-11 SWITCH, ROTARY (LOADING) ************************************************************** 1-688-448-11 LOCK SW BOARD ************** < SWITCH > S622 1-771-604-11 SWITCH, DETECTION (LOCK) ************************************************************** A-4733-709-A MB BOARD, COMPLETE ******************* < CAPACITOR > C101 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C102 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C103 1-126-209-11 ELECT CHIP 100uF 20% 4V C104 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C105 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C106 1-162-914-11 CERAMIC CHIP 9PF 0.5PF 50V C107 1-162-914-11 CERAMIC CHIP 9PF 0.5PF 50V C108 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C109 1-126-209-11 ELECT CHIP 100uF 20% 4V C111 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C113 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C115 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C118 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V C120 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C121 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C122 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C124 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C125 1-126-607-11 ELECT CHIP 47uF 20% 4V C126 1-126-204-11 ELECT CHIP 47uF 20% 16V C127 1-126-246-11 ELECT CHIP 220uF 20% 4V C128 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C129 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C130 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C132 1-164-227-11 CERAMIC CHIP 0.022uF 10% 25V C201 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C202 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C210 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C211 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C212 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C213 1-162-966-11 CERAMIC CHIP 0.0022uF 10% 50V C214 1-164-245-11 CERAMIC CHIP 0.015uF 10% 25V C215 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C216 1-164-230-11 CERAMIC CHIP 220PF 5% 50V C218 1-162-965-11 CERAMIC CHIP 0.0015uF 10% 50V C219 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C220 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C221 1-124-779-00 ELECT CHIP 10uF 20% 16V C225 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C226 1-164-230-11 CERAMIC CHIP 220PF 5% 50V C228 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C229 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C230 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C232 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C233 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C234 1-126-205-11 ELECT CHIP 47uF 20% 6.3V C235 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C236 1-164-230-11 CERAMIC CHIP 220PF 5% 50V C238 1-124-779-00 ELECT CHIP 10uF 20% 16V C240 1-164-677-11 CERAMIC CHIP 0.033uF 10% 16V C241 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C242 1-126-205-11 ELECT CHIP 47uF 20% 6.3V C243 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C244 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C245 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C246 1-164-677-11 CERAMIC CHIP 0.033uF 10% 16V C247 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C248 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C249 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C251 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C252 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C253 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C254 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C255 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C256 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V C257 1-165-176-11 CERAMIC CHIP 0.047uF 10% 16V C258 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C259 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C260 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C261 1-162-959-11 CERAMIC CHIP 330PF 5% 50V C262 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C263 1-124-779-00 ELECT CHIP 10uF 20% 16V C264 1-125-891-11 CERAMIC CHIP 0.47uF 10% 10V C265 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C266 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C270 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C271 1-126-204-11 ELECT CHIP 47uF 20% 16V C272 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C302 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C303 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C304 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C305 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C308 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C309 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C310 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C311 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C312 1-110-563-11 CERAMIC CHIP 0.068uF 10% 16V C313 1-164-677-11 CERAMIC CHIP 0.033uF 10% 16V C314 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C315 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C316 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V LED LOADING MOTOR LOADING SW LOCK SW MB www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 145 DVP-CX777ES C317 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C318 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C319 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C320 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C321 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C322 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C323 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C324 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C325 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C326 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C327 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C328 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C329 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C330 1-162-968-11 CERAMIC CHIP 0.0047uF 10% 50V C331 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C332 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C333 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C334 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C335 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C337 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C338 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C339 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C340 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C343 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C344 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C401 1-126-193-11 ELECT CHIP 1uF 20% 50V C404 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C405 1-124-779-00 ELECT CHIP 10uF 20% 16V C407 1-124-779-00 ELECT CHIP 10uF 20% 16V C408 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C410 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C411 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C413 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C414 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C416 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C417 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C418 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C419 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C420 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C423 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C424 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C426 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C427 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C429 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C430 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C431 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C432 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C433 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C436 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C437 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C438 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C439 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C440 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C441 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C442 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C443 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C448 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C450 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C501 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C502 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C503 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C504 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C505 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C508 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C509 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C510 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C511 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C512 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C513 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C514 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C515 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C516 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C517 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C518 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C519 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C520 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C521 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C522 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C523 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C525 1-125-891-11 CERAMIC CHIP 0.47uF 10% 10V C528 1-125-891-11 CERAMIC CHIP 0.47uF 10% 10V C532 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C535 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C543 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C601 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C602 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C603 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C605 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C606 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C607 1-126-209-11 ELECT CHIP 100uF 20% 4V C608 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C609 1-126-607-11 ELECT CHIP 47uF 20% 4V C610 1-126-607-11 ELECT CHIP 47uF 20% 4V C611 1-126-607-11 ELECT CHIP 47uF 20% 4V C612 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C613 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C614 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C615 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C616 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C617 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C618 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C619 1-126-607-11 ELECT CHIP 47uF 20% 4V C620 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C621 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C622 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C623 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C624 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C625 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C626 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C627 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C628 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C629 1-164-315-11 CERAMIC CHIP 470PF 5% 50V C630 1-164-173-11 CERAMIC CHIP 0.0039uF 10% 50V C631 1-127-956-21 FILM CHIP 0.1uF 5% 16V C632 1-127-956-21 FILM CHIP 0.1uF 5% 16V MB www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 146 DVP-CX777ES C633 1-164-733-11 CERAMIC CHIP 820PF 10% 50V C634 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C635 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C636 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C637 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C638 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C639 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C640 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C701 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C702 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C705 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C707 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C709 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C710 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C711 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C712 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C713 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C714 1-126-607-11 ELECT CHIP 47uF 20% 4V C801 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C802 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C803 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C805 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C806 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C807 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C808 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C809 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C810 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C811 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C812 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C813 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C814 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C816 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C817 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C901 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C902 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C903 1-124-779-00 ELECT CHIP 10uF 20% 16V C904 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C905 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C909 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C910 1-126-209-11 ELECT CHIP 100uF 20% 4V C912 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V C913 1-126-209-11 ELECT CHIP 100uF 20% 4V C914 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C915 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C916 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C917 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C919 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C920 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C921 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C922 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C923 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C924 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C926 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C927 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C928 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C929 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C930 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C931 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C932 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C933 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C934 1-164-677-11 CERAMIC CHIP 0.033uF 10% 16V C935 1-164-677-11 CERAMIC CHIP 0.033uF 10% 16V C936 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V < CONNECTOR > CN101 1-785-728-21 PIN (PC BOARD) , CONNECTOR 7P CN102 1-784-871-21 CONNECTOR, FFC (LIF (NON-ZIF)) 19P * CN103 1-580-789-21 PIN, CONNECTOR (SMD) 6P * CN104 1-770-470-21 PIN, CONNECTOR (PC BOARD) 6P * CN105 1-760-388-11 CONNECTOR PIN (SMD) 9P * CN106 1-691-551-11 PIN, CONNECTOR (SMD) 8P CN107 1-766-382-21 PIN, CONNECTOR (1.5mm) (SMD) 10P CN203 1-573-366-21 CONNECTOR, FFC/FPC 26P CN204 1-817-201-21 CONNECTOR, FFC/FPC 9P CN501 1-784-835-21 CONNECTOR, FFC (LIF (NON-ZIF)) 27P CN601 1-784-834-21 CONNECTOR, FFC (LIF (NON-ZIF)) 23P CN701 1-691-550-11 PIN, CONNECTOR (1.5mm) (SMD) 3P < DIODE > D101 8-719-049-09 DIODE 1SS367-T3SONY D501 8-719-914-44 DIODE DAP202K D502 8-719-914-44 DIODE DAP202K D503 8-719-914-44 DIODE DAP202K < FERRITE BEAD/SHORT > FB104 1-469-324-21 FERRITE 0uH FB105 1-469-324-21 FERRITE 0uH FB106 1-469-324-21 FERRITE 0uH FB107 1-469-324-21 FERRITE 0uH FB108 1-469-324-21 FERRITE 0uH FB109 1-469-324-21 FERRITE 0uH FB110 1-469-324-21 FERRITE 0uH FB111 1-469-324-21 FERRITE 0uH FB112 1-469-784-11 FERRITE 0uH FB121 1-216-864-11 SHORT CHIP 0 FB122 1-216-864-11 SHORT CHIP 0 FB123 1-500-284-21 FERRITE 0uH FB124 1-216-864-11 SHORT CHIP 0 FB125 1-500-283-11 FERRITE 0uH FB126 1-500-283-11 FERRITE 0uH FB127 1-500-284-21 FERRITE 0uH FB401 1-216-864-11 SHORT CHIP 0 FB501 1-469-784-11 FERRITE 0uH FB502 1-469-784-11 FERRITE 0uH FB601 1-216-864-11 SHORT CHIP 0 < FILTER > FL102 1-234-177-21 FILTER, CHIP EMI FL103 1-234-177-21 FILTER, CHIP EMI FL104 1-234-177-21 FILTER, CHIP EMI FL105 1-234-177-21 FILTER, CHIP EMI FL106 1-234-177-21 FILTER, CHIP EMI FL107 1-233-893-21 FILTER, CHIP EMI FL108 1-234-177-21 FILTER, CHIP EMI FL109 1-234-177-21 FILTER, CHIP EMI MB www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 147 DVP-CX777ES FL201 1-234-177-21 FILTER, CHIP EMI FL402 1-234-177-21 FILTER, CHIP EMI FL403 1-234-177-21 FILTER, CHIP EMI FL404 1-234-177-21 FILTER, CHIP EMI FL501 1-234-177-21 FILTER, CHIP EMI FL502 1-234-177-21 FILTER, CHIP EMI FL701 1-234-177-21 FILTER, CHIP EMI FL901 1-234-177-21 FILTER, CHIP EMI FL902 1-234-177-21 FILTER, CHIP EMI FL903 1-234-177-21 FILTER, CHIP EMI FL905 1-234-177-21 FILTER, CHIP EMI < IC > IC101 8-759-640-40 IC BR24C04F-WE2 IC102 6-702-302-01 IC TK11133CSCL-G IC103 6-701-877-01 IC SM8707EV-G-E2 IC104 6-701-837-01 IC MB91307RPFV-G-BND-E1 IC106 6-803-477-01 IC MBM29DL324BE90TN-E11572 IC108 6-701-874-01 IC IDT71V016SA15PH8 (SCD2994) IC201 6-703-445-01 IC SP3726A IC202 6-701-878-01 IC FAN8034L IC301 6-701-876-01 IC CXD9703R IC302 6-702-302-01 IC TK11133CSCL-G IC303 6-702-020-01 IC MSM151V18160F-60T47M1 IC401 6-702-300-01 IC TK11118CSCL-G IC403 8-752-416-45 IC CXD1935Q IC404 6-703-842-01 IC GLT5160L16P-7TCT IC405 6-703-842-01 IC GLT5160L16P-7TCT IC501 8-752-418-21 IC CXD1938AR IC502 6-704-222-01 IC AK4358VQ-L IC601 6-702-301-01 IC TK11125CSCL-G IC602 6-701-814-01 IC CXD9698R IC603 6-703-842-01 IC GLT5160L16P-7TCT IC604 6-704-646-01 IC ADV7310KST IC605 6-702-301-01 IC TK11125CSCL-G IC701 6-702-287-01 IC CXD9705R IC702 6-702-439-01 IC K9F6408U0C-TCB0T IC703 8-759-548-99 IC SN74LV08APWR IC801 6-705-008-11 IC CXD9722ATQ IC802 6-703-842-01 IC GLT5160L16P-7TCT IC803 6-702-302-01 IC TK11133CSCL-G IC901 6-704-261-01 IC TK11225CMCL-G IC903 6-703-842-01 IC GLT5160L16P-7TCT IC905 8-752-416-77 IC CXD2753R IC906 6-702-231-01 IC LMH6642MFX/NOPB < COIL > L101 1-414-410-21 INDUCTOR CHIP 10uH L201 1-412-031-11 INDUCTOR CHIP 47uH L202 1-412-031-11 INDUCTOR CHIP 47uH < TRANSISTOR > Q001 8-729-027-38 TRANSISTOR DTA144EKA-T146 Q002 8-729-027-38 TRANSISTOR DTA144EKA-T146 Q201 8-729-903-46 TRANSISTOR 2SB1132-P Q202 8-729-903-46 TRANSISTOR 2SB1132-P Q701 8-729-900-53 TRANSISTOR DTC114EK < RESISTOR > R021 1-216-833-11 METAL CHIP 10K 5% 1/10W R022 1-216-864-11 SHORT CHIP 0 R101 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R102 1-216-833-11 METAL CHIP 10K 5% 1/10W R103 1-216-864-11 SHORT CHIP 0 R105 1-216-864-11 SHORT CHIP 0 R106 1-216-821-11 METAL CHIP 1K 5% 1/10W R107 1-216-837-11 METAL CHIP 22K 5% 1/10W R108 1-216-864-11 SHORT CHIP 0 R109 1-216-805-11 METAL CHIP 47 5% 1/10W R110 1-216-805-11 METAL CHIP 47 5% 1/10W R111 1-216-821-11 METAL CHIP 1K 5% 1/10W R112 1-216-845-11 METAL CHIP 100K 5% 1/10W R113 1-216-845-11 METAL CHIP 100K 5% 1/10W R114 1-216-821-11 METAL CHIP 1K 5% 1/10W R115 1-216-821-11 METAL CHIP 1K 5% 1/10W R117 1-216-833-11 METAL CHIP 10K 5% 1/10W R118 1-216-833-11 METAL CHIP 10K 5% 1/10W R119 1-216-813-11 METAL CHIP 220 5% 1/10W R120 1-216-797-11 METAL CHIP 10 5% 1/10W R121 1-216-805-11 METAL CHIP 47 5% 1/10W R122 1-216-809-11 METAL CHIP 100 5% 1/10W R123 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R124 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R125 1-216-833-11 METAL CHIP 10K 5% 1/10W R126 1-216-833-11 METAL CHIP 10K 5% 1/10W R129 1-216-797-11 METAL CHIP 10 5% 1/10W R133 1-216-833-11 METAL CHIP 10K 5% 1/10W R138 1-216-809-11 METAL CHIP 100 5% 1/10W R139 1-216-833-11 METAL CHIP 10K 5% 1/10W R141 1-216-797-11 METAL CHIP 10 5% 1/10W R142 1-216-797-11 METAL CHIP 10 5% 1/10W R144 1-216-797-11 METAL CHIP 10 5% 1/10W R146 1-216-797-11 METAL CHIP 10 5% 1/10W R147 1-216-805-11 METAL CHIP 47 5% 1/10W R148 1-216-809-11 METAL CHIP 100 5% 1/10W R150 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R151 1-216-809-11 METAL CHIP 100 5% 1/10W R152 1-216-833-11 METAL CHIP 10K 5% 1/10W R154 1-216-809-11 METAL CHIP 100 5% 1/10W R157 1-216-809-11 METAL CHIP 100 5% 1/10W R159 1-216-833-11 METAL CHIP 10K 5% 1/10W R160 1-216-809-11 METAL CHIP 100 5% 1/10W R163 1-216-809-11 METAL CHIP 100 5% 1/10W R165 1-216-833-11 METAL CHIP 10K 5% 1/10W R166 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R167 1-216-809-11 METAL CHIP 100 5% 1/10W R168 1-216-864-11 SHORT CHIP 0 R170 1-414-226-21 FERRITE 0uH R171 1-216-833-11 METAL CHIP 10K 5% 1/10W R172 1-216-821-11 METAL CHIP 1K 5% 1/10W R173 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R175 1-216-864-11 SHORT CHIP 0 R176 1-216-809-11 METAL CHIP 100 5% 1/10W R177 1-216-809-11 METAL CHIP 100 5% 1/10W R178 1-216-809-11 METAL CHIP 100 5% 1/10W MB www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 148 DVP-CX777ES R179 1-216-809-11 METAL CHIP 100 5% 1/10W R180 1-216-809-11 METAL CHIP 100 5% 1/10W R181 1-216-801-11 METAL CHIP 22 5% 1/10W R182 1-216-801-11 METAL CHIP 22 5% 1/10W R183 1-216-809-11 METAL CHIP 100 5% 1/10W R184 1-216-864-11 SHORT CHIP 0 R185 1-216-864-11 SHORT CHIP 0 R187 1-216-809-11 METAL CHIP 100 5% 1/10W R188 1-216-809-11 METAL CHIP 100 5% 1/10W R189 1-216-809-11 METAL CHIP 100 5% 1/10W R190 1-216-809-11 METAL CHIP 100 5% 1/10W R191 1-216-805-11 METAL CHIP 47 5% 1/10W R192 1-216-864-11 SHORT CHIP 0 R193 1-216-809-11 METAL CHIP 100 5% 1/10W R194 1-216-864-11 SHORT CHIP 0 R195 1-216-809-11 METAL CHIP 100 5% 1/10W R196 1-216-809-11 METAL CHIP 100 5% 1/10W R197 1-216-809-11 METAL CHIP 100 5% 1/10W R198 1-216-809-11 METAL CHIP 100 5% 1/10W R199 1-216-809-11 METAL CHIP 100 5% 1/10W R206 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R210 1-216-815-11 METAL CHIP 330 5% 1/10W R211 1-216-809-11 METAL CHIP 100 5% 1/10W R212 1-216-809-11 METAL CHIP 100 5% 1/10W R218 1-216-846-11 METAL CHIP 120K 5% 1/10W R219 1-216-846-11 METAL CHIP 120K 5% 1/10W R220 1-216-847-11 METAL CHIP 150K 5% 1/10W R221 1-216-847-11 METAL CHIP 150K 5% 1/10W R222 1-216-842-11 METAL CHIP 56K 5% 1/10W R223 1-216-842-11 METAL CHIP 56K 5% 1/10W R224 1-216-850-11 METAL CHIP 270K 5% 1/10W R225 1-216-833-11 METAL CHIP 10K 5% 1/10W R226 1-216-853-11 METAL CHIP 470K 5% 1/10W R227 1-216-846-11 METAL CHIP 120K 5% 1/10W R229 1-216-833-11 METAL CHIP 10K 5% 1/10W R230 1-216-839-11 METAL CHIP 33K 5% 1/10W R231 1-216-855-11 METAL CHIP 680K 5% 1/10W R232 1-216-839-11 METAL CHIP 33K 5% 1/10W R233 1-216-853-11 METAL CHIP 470K 5% 1/10W R234 1-211-981-11 METAL CHIP 33 0.5% 1/10W R235 1-216-809-11 METAL CHIP 100 5% 1/10W R236 1-211-981-11 METAL CHIP 33 0.5% 1/10W R238 1-216-839-11 METAL CHIP 33K 5% 1/10W R239 1-216-839-11 METAL CHIP 33K 5% 1/10W R240 1-216-839-11 METAL CHIP 33K 5% 1/10W R241 1-216-839-11 METAL CHIP 33K 5% 1/10W R242 1-216-849-11 METAL CHIP 220K 5% 1/10W R243 1-216-853-11 METAL CHIP 470K 5% 1/10W R244 1-216-821-11 METAL CHIP 1K 5% 1/10W R245 1-216-841-11 METAL CHIP 47K 5% 1/10W R246 1-216-809-11 METAL CHIP 100 5% 1/10W R248 1-216-803-11 METAL CHIP 33 5% 1/10W R249 1-216-803-11 METAL CHIP 33 5% 1/10W R250 1-218-895-11 METAL CHIP 100K 0.5% 1/10W R251 1-216-841-11 METAL CHIP 47K 5% 1/10W R253 1-218-889-11 METAL CHIP 56K 0.5% 1/10W R254 1-218-895-11 METAL CHIP 100K 0.5% 1/10W R255 1-218-889-11 METAL CHIP 56K 0.5% 1/10W R256 1-216-809-11 METAL CHIP 100 5% 1/10W R259 1-216-833-11 METAL CHIP 10K 5% 1/10W R260 1-216-834-11 METAL CHIP 12K 5% 1/10W R261 1-216-833-11 METAL CHIP 10K 5% 1/10W R262 1-216-815-11 METAL CHIP 330 5% 1/10W R263 1-216-861-11 METAL CHIP 2.2M 5% 1/10W R264 1-216-845-11 METAL CHIP 100K 5% 1/10W R265 1-216-838-11 METAL CHIP 27K 5% 1/10W R269 1-216-833-11 METAL CHIP 10K 5% 1/10W R273 1-216-864-11 SHORT CHIP 0 R274 1-216-833-11 METAL CHIP 10K 5% 1/10W R281 1-216-864-11 SHORT CHIP 0 R282 1-216-864-11 SHORT CHIP 0 R301 1-216-295-00 SHORT CHIP 0 R302 1-216-295-00 SHORT CHIP 0 R310 1-216-821-11 METAL CHIP 1K 5% 1/10W R311 1-216-809-11 METAL CHIP 100 5% 1/10W R312 1-218-831-11 METAL CHIP 220 0.5% 1/10W R313 1-216-817-11 METAL CHIP 470 5% 1/10W R314 1-216-817-11 METAL CHIP 470 5% 1/10W R315 1-216-817-11 METAL CHIP 470 5% 1/10W R316 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R317 1-216-833-11 METAL CHIP 10K 5% 1/10W R318 1-216-817-11 METAL CHIP 470 5% 1/10W R319 1-218-871-11 METAL CHIP 10K 0.5% 1/10W R320 1-218-883-11 METAL CHIP 33K 0.5% 1/10W R321 1-218-879-11 METAL CHIP 22K 0.5% 1/10W R322 1-218-847-11 METAL CHIP 1K 0.5% 1/10W R323 1-218-855-11 METAL CHIP 2.2K 0.5% 1/10W R324 1-216-833-11 METAL CHIP 10K 5% 1/10W R325 1-218-867-11 METAL CHIP 6.8K 5% 1/10W R326 1-216-833-11 METAL CHIP 10K 5% 1/10W R327 1-218-871-11 METAL CHIP 10K 0.5% 1/10W R328 1-216-838-11 METAL CHIP 27K 5% 1/10W R329 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R330 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R331 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R332 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R333 1-216-847-11 METAL CHIP 150K 5% 1/10W R334 1-218-853-11 METAL CHIP 1.8K 0.5% 1/10W R335 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R336 1-216-833-11 METAL CHIP 10K 5% 1/10W R337 1-216-833-11 METAL CHIP 10K 5% 1/10W R338 1-216-801-11 METAL CHIP 22 5% 1/10W R349 1-216-833-11 METAL CHIP 10K 5% 1/10W R351 1-216-295-00 SHORT CHIP 0 R352 1-216-295-00 SHORT CHIP 0 R358 1-216-833-11 METAL CHIP 10K 5% 1/10W R359 1-216-833-11 METAL CHIP 10K 5% 1/10W R360 1-216-809-11 METAL CHIP 100 5% 1/10W R366 1-216-801-11 METAL CHIP 22 5% 1/10W R402 1-216-295-00 SHORT CHIP 0 R407 1-216-809-11 METAL CHIP 100 5% 1/10W R414 1-216-833-11 METAL CHIP 10K 5% 1/10W R416 1-218-867-11 METAL CHIP 6.8K 5% 1/10W R418 1-216-822-11 METAL CHIP 1.2K 5% 1/10W R419 1-216-797-11 METAL CHIP 10 5% 1/10W MB www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 149 DVP-CX777ES R426 1-216-833-11 METAL CHIP 10K 5% 1/10W R430 1-216-833-11 METAL CHIP 10K 5% 1/10W R434 1-216-797-11 METAL CHIP 10 5% 1/10W R506 1-216-864-11 SHORT CHIP 0 R509 1-216-864-11 SHORT CHIP 0 R511 1-216-864-11 SHORT CHIP 0 R520 1-216-809-11 METAL CHIP 100 5% 1/10W R524 1-216-864-11 SHORT CHIP 0 R525 1-216-833-11 METAL CHIP 10K 5% 1/10W R527 1-216-833-11 METAL CHIP 10K 5% 1/10W R528 1-216-864-11 SHORT CHIP 0 R530 1-216-833-11 METAL CHIP 10K 5% 1/10W R531 1-216-833-11 METAL CHIP 10K 5% 1/10W R532 1-216-833-11 METAL CHIP 10K 5% 1/10W R536 1-216-864-11 SHORT CHIP 0 R539 1-216-864-11 SHORT CHIP 0 R541 1-216-864-11 SHORT CHIP 0 R544 1-216-864-11 SHORT CHIP 0 R546 1-216-864-11 SHORT CHIP 0 R547 1-216-833-11 METAL CHIP 10K 5% 1/10W R549 1-216-864-11 SHORT CHIP 0 R551 1-216-864-11 SHORT CHIP 0 R552 1-216-864-11 SHORT CHIP 0 R556 1-216-864-11 SHORT CHIP 0 R557 1-216-864-11 SHORT CHIP 0 R566 1-216-864-11 SHORT CHIP 0 R588 1-216-864-11 SHORT CHIP 0 R589 1-216-864-11 SHORT CHIP 0 R590 1-216-797-11 METAL CHIP 10 5% 1/10W R592 1-216-864-11 SHORT CHIP 0 R593 1-216-864-11 SHORT CHIP 0 R601 1-216-864-11 SHORT CHIP 0 R603 1-216-809-11 METAL CHIP 100 5% 1/10W R605 1-216-833-11 METAL CHIP 10K 5% 1/10W R614 1-216-864-11 SHORT CHIP 0 R615 1-218-285-11 METAL CHIP 75 5% 1/10W R617 1-218-292-11 METAL CHIP 20K 5% 1/10W R618 1-216-864-11 SHORT CHIP 0 R620 1-216-864-11 SHORT CHIP 0 R639 1-216-864-11 SHORT CHIP 0 R640 1-216-789-11 METAL CHIP 2.2 5% 1/10W R663 1-216-864-11 SHORT CHIP 0 R664 1-216-864-11 SHORT CHIP 0 R665 1-216-864-11 SHORT CHIP 0 R674 1-216-819-11 METAL CHIP 680 5% 1/10W R675 1-216-826-11 METAL CHIP 2.7K 5% 1/10W R676 1-216-826-11 METAL CHIP 2.7K 5% 1/10W R677 1-216-809-11 METAL CHIP 100 5% 1/10W R678 1-218-834-11 METAL CHIP 300 0.5% 1/10W R679 1-218-834-11 METAL CHIP 300 0.5% 1/10W R680 1-218-834-11 METAL CHIP 300 0.5% 1/10W R681 1-218-834-11 METAL CHIP 300 0.5% 1/10W R682 1-218-834-11 METAL CHIP 300 0.5% 1/10W R683 1-218-834-11 METAL CHIP 300 0.5% 1/10W R686 1-216-809-11 METAL CHIP 100 5% 1/10W R687 1-216-809-11 METAL CHIP 100 5% 1/10W R697 1-216-864-11 SHORT CHIP 0 R698 1-216-864-11 SHORT CHIP 0 R701 1-216-833-11 METAL CHIP 10K 5% 1/10W R702 1-216-833-11 METAL CHIP 10K 5% 1/10W R705 1-216-809-11 METAL CHIP 100 5% 1/10W R706 1-216-864-11 SHORT CHIP 0 R712 1-216-833-11 METAL CHIP 10K 5% 1/10W R713 1-216-295-00 SHORT CHIP 0 R716 1-216-833-11 METAL CHIP 10K 5% 1/10W R717 1-216-833-11 METAL CHIP 10K 5% 1/10W R719 1-216-833-11 METAL CHIP 10K 5% 1/10W R720 1-216-833-11 METAL CHIP 10K 5% 1/10W R722 1-216-833-11 METAL CHIP 10K 5% 1/10W R728 1-216-809-11 METAL CHIP 100 5% 1/10W R729 1-216-809-11 METAL CHIP 100 5% 1/10W R730 1-216-809-11 METAL CHIP 100 5% 1/10W R735 1-216-809-11 METAL CHIP 100 5% 1/10W R738 1-216-833-11 METAL CHIP 10K 5% 1/10W R791 1-216-809-11 METAL CHIP 100 5% 1/10W R814 1-216-809-11 METAL CHIP 100 5% 1/10W R817 1-216-864-11 SHORT CHIP 0 R902 1-216-864-11 SHORT CHIP 0 R907 1-216-864-11 SHORT CHIP 0 R909 1-216-834-11 METAL CHIP 12K 5% 1/10W R910 1-218-867-11 METAL CHIP 6.8K 5% 1/10W R913 1-216-803-11 METAL CHIP 33 5% 1/10W R915 1-216-821-11 METAL CHIP 1K 5% 1/10W R916 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R917 1-216-864-11 SHORT CHIP 0 R919 1-216-809-11 METAL CHIP 100 5% 1/10W R921 1-216-833-11 METAL CHIP 10K 5% 1/10W R922 1-216-833-11 METAL CHIP 10K 5% 1/10W R931 1-216-833-11 METAL CHIP 10K 5% 1/10W R955 1-216-809-11 METAL CHIP 100 5% 1/10W R956 1-216-809-11 METAL CHIP 100 5% 1/10W R957 1-216-809-11 METAL CHIP 100 5% 1/10W R958 1-216-809-11 METAL CHIP 100 5% 1/10W R959 1-216-809-11 METAL CHIP 100 5% 1/10W R960 1-216-809-11 METAL CHIP 100 5% 1/10W R961 1-216-809-11 METAL CHIP 100 5% 1/10W R962 1-216-809-11 METAL CHIP 100 5% 1/10W R963 1-216-809-11 METAL CHIP 100 5% 1/10W R964 1-216-809-11 METAL CHIP 100 5% 1/10W < COMPOSITION CIRCUIT BLOCK > RB102 1-233-270-11 NETWORK, RES (8 GANG) 10K RB103 1-233-576-11 RES, CHIP NETWORK 100 RB104 1-233-576-11 RES, CHIP NETWORK 100 RB105 1-233-576-11 RES, CHIP NETWORK 100 RB106 1-233-576-11 RES, CHIP NETWORK 100 RB107 1-233-576-11 RES, CHIP NETWORK 100 RB108 1-233-576-11 RES, CHIP NETWORK 100 RB109 1-233-576-11 RES, CHIP NETWORK 100 RB110 1-233-576-11 RES, CHIP NETWORK 100 RB111 1-233-576-11 RES, CHIP NETWORK 100 RB901 1-236-908-11 RES, CHIP NETWORK 10K (3216) RB902 1-236-908-11 RES, CHIP NETWORK 10K (3216) MB www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 150 DVP-CX777ES < VARIABLE RESISTOR > RV101 1-223-587-11 RES, ADJ, CARBON 22K RV601 1-223-583-41 RES, ADJ, CARBON (3 TYPE) 1K RV602 1-223-583-41 RES, ADJ, CARBON (3 TYPE) 1K < VIBRATOR > X101 1-795-174-11 VIBRATOR, CERAMIC (16.5MHz) X102 1-781-867-21 VIBRATOR, CRYSTAL (27MHz) ************************************************************** A-4733-701-A PANEL-L BOARD, COMPLETE ************************ 4-246-508-01 HOLDER (FL) 4-949-935-41 CUSHION (FL) < CAPACITOR > C1002 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C1003 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C1004 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C1005 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C1009 1-115-156-11 CERAMIC CHIP 1uF 10V C1011 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C1014 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C1015 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C1016 1-162-970-11 CERAMIC CHIP 0.01uF 10% 25V C1017 1-124-589-11 ELECT 47uF 20% 16V C1019 1-162-927-11 CERAMIC CHIP 100PF 5% 50V C1031 1-164-156-11 CERAMIC CHIP 0.1uF 25V C1032 1-164-156-11 CERAMIC CHIP 0.1uF 25V C1033 1-164-156-11 CERAMIC CHIP 0.1uF 25V C1034 1-164-156-11 CERAMIC CHIP 0.1uF 25V C1035 1-164-156-11 CERAMIC CHIP 0.1uF 25V C1036 1-162-922-11 CERAMIC CHIP 39PF 5% 50V C1041 1-124-589-11 ELECT 47uF 20% 16V C1042 1-164-156-11 CERAMIC CHIP 0.1uF 25V C1052 1-124-589-11 ELECT 47uF 20% 16V C1081 1-128-131-11 ELECT 22uF 20% 50V C1082 1-137-150-11 FILM 0.01uF 5% 100V C1083 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V C1085 1-128-131-11 ELECT 22uF 20% 50V C1086 1-128-131-11 ELECT 22uF 20% 50V C1087 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V C1088 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V C1089 1-115-339-11 CERAMIC CHIP 0.1uF 10% 50V < CONNECTOR > CN1001 1-764-177-11 PIN, CONNECTOR (SMD) (1.5mm) 7P CN1002 1-790-669-21 PIN, CONNECTOR (PC BOARD) 9P * CN1004 1-566-970-11 HOUSING, CONNECTOR (PC BOARD) 8P CN1005 1-778-691-11 CONNECTOR, FFC/FPC 19P < DIODE > D1002 8-719-992-02 DIODE RB705D-T146 D1011 6-500-329-01 LED SELU5E23C-PTP15 (PROGRESSIVE) D1012 6-500-324-01 LED CL-191WA-D-T (SACD) D1013 6-500-329-01 LED SELU5E23C-PTP15 (MULTI CHANNEL) D1014 8-719-046-39 LED SEL5821A-TP15 (FL OFF) D1015 8-719-046-39 LED SEL5821A-TP15 (VIDEO OFF) D1081 8-719-041-97 DIODE MA113-(TX) D1082 8-719-041-97 DIODE MA113-(TX) D1083 8-719-041-97 DIODE MA113-(TX) D1084 8-719-041-97 DIODE MA113-(TX) D1085 8-719-083-71 DIODE UDZSTE-1730B D1086 8-719-069-56 DIODE UDZSTE-176.2B < SHORT > FB1001 1-216-295-00 SHORT CHIP 0 < FLUORESCENT INDICATOR TUBE > FL1001 1-518-904-11 INDICATOR TUBE, FLUORESCENT < IC > IC1003 6-803-267-01 IC uPD70F3259YGF-S05-JBT-A IC1004 8-759-826-34 IC NJL74H400A (REMOTE CONTROL RECEIVER) IC1005 8-759-710-82 IC NJM2406F IC1006 6-704-158-01 IC S-80827CNUA-B8PT2G IC1007 8-759-680-17 IC MSM9201-04GS-K IC1008 8-759-350-42 IC PST9127NL IC1009 8-759-350-42 IC PST9127NL < COIL > L1081 1-400-096-21 INDUCTOR 47uH L1082 1-400-096-21 INDUCTOR 47uH < TRANSISTOR > Q1001 8-729-900-53 TRANSISTOR DTC114EK Q1002 8-729-900-53 TRANSISTOR DTC114EK Q1005 8-729-424-02 TRANSISTOR 2SB709A-QRS-TX Q1006 8-729-027-38 TRANSISTOR DTC114EK Q1011 8-729-900-53 TRANSISTOR DTC114EK Q1012 8-729-900-53 TRANSISTOR DTC114EK Q1013 8-729-900-53 TRANSISTOR DTC114EK Q1014 8-729-900-53 TRANSISTOR DTC114EK Q1015 8-729-900-53 TRANSISTOR DTC114EK Q1016 8-729-900-53 TRANSISTOR DTC114EK Q1017 8-729-900-53 TRANSISTOR DTC114EK Q1071 8-729-120-28 TRANSISTOR 2SC1623-L5L6 Q1081 8-729-808-01 TRANSISTOR 2SD1622-S Q1082 8-729-808-01 TRANSISTOR 2SD1622-S Q1083 8-729-804-41 TRANSISTOR 2SB1122-S < RESISTOR/CAPACITOR > R1001 1-216-841-11 METAL CHIP 47K 5% 1/10W R1002 1-216-295-00 SHORT CHIP 0 R1003 1-216-837-11 METAL CHIP 22K 5% 1/10W R1004 1-216-837-11 METAL CHIP 22K 5% 1/10W R1005 1-216-833-11 METAL CHIP 10K 5% 1/10W R1006 1-216-821-11 METAL CHIP 1K 5% 1/10W R1007 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R1009 1-216-845-11 METAL CHIP 100K 5% 1/10W R1010 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R1011 1-216-295-00 SHORT CHIP 0 R1012 1-216-295-00 SHORT CHIP 0 MB PANEL-L www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 151 DVP-CX777ES R1013 1-216-295-00 SHORT CHIP 0 R1014 1-216-833-11 METAL CHIP 10K 5% 1/10W R1015 1-216-809-11 METAL CHIP 100 5% 1/10W R1016 1-216-809-11 METAL CHIP 100 5% 1/10W R1017 1-216-295-00 SHORT CHIP 0 R1018 1-216-809-11 METAL CHIP 100 5% 1/10W R1019 1-216-809-11 METAL CHIP 100 5% 1/10W R1020 1-216-833-11 METAL CHIP 10K 5% 1/10W R1021 1-216-805-11 METAL CHIP 47 5% 1/10W R1022 1-216-295-00 SHORT CHIP 0 R1023 1-216-833-11 METAL CHIP 10K 5% 1/10W R1024 1-216-833-11 METAL CHIP 10K 5% 1/10W R1025 1-216-833-11 METAL CHIP 10K 5% 1/10W R1026 1-216-833-11 METAL CHIP 10K 5% 1/10W R1028 1-216-801-11 METAL CHIP 22 5% 1/10W R1029 1-216-801-11 METAL CHIP 22 5% 1/10W R1031 1-216-833-11 METAL CHIP 10K 5% 1/10W R1032 1-216-833-11 METAL CHIP 10K 5% 1/10W R1035 1-216-833-11 METAL CHIP 10K 5% 1/10W R1036 1-216-833-11 METAL CHIP 10K 5% 1/10W R1037 1-216-833-11 METAL CHIP 10K 5% 1/10W R1038 1-216-833-11 METAL CHIP 10K 5% 1/10W R1039 1-216-833-11 METAL CHIP 10K 5% 1/10W R1040 1-216-833-11 METAL CHIP 10K 5% 1/10W R1041 1-115-156-11 CERAMIC CHIP 1uF 10V R1043 1-216-295-00 SHORT CHIP 0 R1044 1-216-810-11 METAL CHIP 120 5% 1/10W R1045 1-216-803-11 METAL CHIP 33 5% 1/10W R1046 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R1047 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R1050 1-216-295-00 SHORT CHIP 0 R1051 1-216-821-11 METAL CHIP 1K 5% 1/10W R1052 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R1053 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R1054 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R1055 1-216-833-11 METAL CHIP 10K 5% 1/10W R1056 1-216-837-11 METAL CHIP 22K 5% 1/10W R1057 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R1058 1-216-833-11 METAL CHIP 10K 5% 1/10W R1060 1-216-295-00 SHORT CHIP 0 R1061 1-216-809-11 METAL CHIP 100 5% 1/10W R1062 1-216-818-11 METAL CHIP 560 5% 1/10W R1063 1-216-809-11 METAL CHIP 100 5% 1/10W R1064 1-216-811-11 METAL CHIP 150 5% 1/10W R1065 1-216-811-11 METAL CHIP 150 5% 1/10W R1067 1-216-827-11 METAL CHIP 3.3K 5% 1/10W R1069 1-216-295-00 SHORT CHIP 0 R1071 1-216-809-11 METAL CHIP 100 5% 1/10W R1073 1-216-841-11 METAL CHIP 47K 5% 1/10W R1074 1-216-809-11 METAL CHIP 100 5% 1/10W R1076 1-216-841-11 METAL CHIP 47K 5% 1/10W R1077 1-216-809-11 METAL CHIP 100 5% 1/10W R1078 1-216-801-11 METAL CHIP 22 5% 1/10W R1079 1-216-801-11 METAL CHIP 22 5% 1/10W R1080 1-216-845-11 METAL CHIP 100K 5% 1/10W R1081 1-218-867-11 METAL CHIP 6.8K 5% 1/10W R1082 1-218-867-11 METAL CHIP 6.8K 5% 1/10W R1083 1-216-828-11 METAL CHIP 3.9K 5% 1/10W R1084 1-216-833-11 METAL CHIP 10K 5% 1/10W R1085 1-216-801-11 METAL CHIP 22 5% 1/10W R1086 1-216-801-11 METAL CHIP 22 5% 1/10W R1087 1-216-801-11 METAL CHIP 22 5% 1/10W R1088 1-216-801-11 METAL CHIP 22 5% 1/10W R1089 1-216-801-11 METAL CHIP 22 5% 1/10W R1090 1-216-801-11 METAL CHIP 22 5% 1/10W R1091 1-216-801-11 METAL CHIP 22 5% 1/10W R1092 1-216-801-11 METAL CHIP 22 5% 1/10W R1093 1-216-801-11 METAL CHIP 22 5% 1/10W R1094 1-216-801-11 METAL CHIP 22 5% 1/10W R1095 1-216-801-11 METAL CHIP 22 5% 1/10W R1096 1-216-801-11 METAL CHIP 22 5% 1/10W R1097 1-216-801-11 METAL CHIP 22 5% 1/10W R1098 1-216-801-11 METAL CHIP 22 5% 1/10W R1099 1-216-827-11 METAL CHIP 3.3K 5% 1/10W < SWITCH > S1001 1-771-410-21 SWITCH, TACTILE (FL OFF) S1002 1-771-410-21 SWITCH, TACTILE (TIME/TEXT) S1003 1-771-410-21 SWITCH, TACTILE (VIDEO CONTROL) S1004 1-771-410-21 SWITCH, TACTILE (SURROUND) S1005 1-771-410-21 SWITCH, TACTILE (VIDEO OFF) S1006 1-771-410-21 SWITCH, TACTILE (FOLDER) S1007 1-771-410-21 SWITCH, TACTILE (1/ALL DISC) S1008 1-771-410-21 SWITCH, TACTILE (I/1) S1009 1-771-410-21 SWITCH, TACTILE (LOAD) < TRANSFORMER > T1081 1-437-887-11 TRANSFORMER, DC-DC CONVERTER < VIBRATOR > X1001 1-795-058-21 VIBRATOR, CERAMIC (5MHz) ************************************************************** A-4733-713-A PANEL-R BOARD, COMPLETE ************************ < LED > D1101 8-719-046-39 LED SEL5821A-TP15 (DISC CHANGE) D1102 8-719-046-41 LED SEL5521C-TP15 (DITECT SERACH) < SWITCH > JG1101 1-786-546-11 SWITCH, TACTILE (PUSH ENTER) < RESISTOR > R1101 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R1102 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R1103 1-216-821-11 METAL CHIP 1K 5% 1/10W R1104 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R1105 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R1106 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R1107 1-216-833-11 METAL CHIP 10K 5% 1/10W R1108 1-216-837-11 METAL CHIP 22K 5% 1/10W R1109 1-216-841-11 METAL CHIP 47K 5% 1/10W R1110 1-216-821-11 METAL CHIP 1K 5% 1/10W R1111 1-216-825-11 METAL CHIP 2.2K 5% 1/10W PANEL-L PANEL-R www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 152 DVP-CX777ES R1112 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R1113 1-216-829-11 METAL CHIP 4.7K 5% 1/10W R1114 1-216-833-11 METAL CHIP 10K 5% 1/10W R1115 1-216-837-11 METAL CHIP 22K 5% 1/10W R1116 1-216-811-11 METAL CHIP 150 5% 1/10W R1117 1-216-811-11 METAL CHIP 150 5% 1/10W R1118 1-216-827-11 METAL CHIP 3.3K 5% 1/10W < ROTARY ENCODER > RE1101 1-475-543-11 ENCODER, ROTARY (DIASC AMS, PUSH ENTER) < SWITCH > S1101 1-771-410-21 SWITCH, TACTILE (OPEN/CLOSE) S1102 1-771-410-21 SWITCH, TACTILE (A DISC EJECT) S1103 1-771-410-21 SWITCH, TACTILE (N) S1104 1-771-410-21 SWITCH, TACTILE (TOP MENU) S1105 1-771-410-21 SWITCH, TACTILE (DISPLAY) S1106 1-771-410-21 SWITCH, TACTILE (MENU) S1107 1-771-410-21 SWITCH, TACTILE (x) S1108 1-771-410-21 SWITCH, TACTILE (X) S1109 1-771-410-21 SWITCH, TACTILE (O RETURN) S1110 1-771-410-21 SWITCH, TACTILE (+100) S1111 1-771-410-21 SWITCH, TACTILE (DISC CHANGE) S1112 1-771-410-21 SWITCH, TACTILE (DIRECT SERACH) ************************************************************** 1-477-957-11 POWER BLOCK (Including POWER BOARD) ************ < CAPACITOR > 0C101 1-165-528-11 FILM 0.1uF 10% 275V 0C102 1-165-528-11 FILM 0.1uF 10% 275V 0C103 1-113-928-11 CERAMIC 100PF 10% 125V 0C104 1-113-928-11 CERAMIC 100PF 10% 125V 0C107 9-885-036-09 ELECT 120uF 0C110 1-126-964-11 ELECT 10uF 20% 50V 0C114 1-126-947-11 ELECT 47uF 20% 35V C212 9-885-036-15 ELECT 330uF C301 9-885-036-16 ELECT 1000uF C302 1-126-964-11 ELECT 10uF 20% 50V C303 1-126-960-11 ELECT 1uF 20% 50V C304 1-126-933-11 ELECT 100uF 20% 16V C306 1-126-923-11 ELECT 220uF 20% 10V C308 1-126-947-11 ELECT 47uF 20% 35V C309 1-126-947-11 ELECT 47uF 20% 35V C402 1-126-947-11 ELECT 47uF 20% 35V C502 9-885-020-98 ELECT 220uF 25V C503 1-126-947-11 ELECT 47uF 20% 35V C504 9-885-020-98 ELECT 220uF 25V C505 1-126-947-11 ELECT 47uF 20% 35V < CONNECTOR > * CN101 1-580-230-31 PIN, CONNECTOR (PC BOARD) 2P * CN102 1-568-226-11 PIN, CONNECTOR (3.96mm PITCH) 2P * CN201 1-564-715-11 PIN, CONNECTOR (SMALL TYPE) 13P < DIODE > 0D101 9-885-020-72 DIODE 1N4005L 0D102 9-885-020-72 DIODE 1N4005L 0D103 9-885-020-72 DIODE 1N4005L 0D104 9-885-020-72 DIODE 1N4005L 0D106 8-719-081-77 DIODE SARS01 0D107 8-719-063-70 DIODE D1NL20U 0D108 8-719-921-63 DIODE MTZJ7.5 D211 9-885-036-10 DIODE D2L20U D213 8-719-901-33 DIODE 1SS133 D301 8-719-510-73 DIODE S3L20U D302 9-885-020-72 DIODE 1N4005L D303 9-885-020-72 DIODE 1N4005L D304 9-885-020-72 DIODE 1N4005L D305 8-719-510-73 DIODE S3L20U D308 8-719-901-33 DIODE 1SS133 D501 9-885-036-10 DIODE D2L20U D502 8-719-063-70 DIODE D1NL20U < FUSE > 0F101 9-885-020-67 FUSE (2A/125V) < TERMINAL EARTH > * FG001 1-537-738-21 TERMINAL, EARTH * FG002 1-537-738-21 TERMINAL, EARTH * FG003 1-537-738-21 TERMINAL, EARTH * FG004 1-537-738-21 TERMINAL, EARTH < IC > 0IC101 9-885-036-08 IC MIP2E5DMY IC301 8-759-420-19 IC AN1431 IC302 (Not supplied) IC401 (Not supplied) < COIL > 0L101 9-885-020-69 FILTER, LINE 0L102 9-885-020-69 FILTER, LINE 0L104 9-885-020-70 CORE, BEAD < IC LINK > P301 9-885-036-14 LINK, IC P502 9-885-024-65 LINK, IC < PHOTO COUPLER > 0PC101 8-749-924-35 PHOTO COUPLER ON3171 < TRANSISTOR > Q201 9-885-021-04 FET 2SJ525 Q202 8-729-901-78 TRANSISTOR 2SC2412K-R Q301 9-885-021-04 FET 2SJ525 Q302 8-729-901-78 TRANSISTOR 2SC2412K-R Q501 9-885-022-75 TRANSISTOR 2SD1862 Q502 8-729-027-34 TRANSISTOR DTA143EKA-T146 < RESISTOR > 0R104 1-216-805-11 METAL CHIP 47 5% 1/10W PANEL-R POWER The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part num- ber specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 153 DVP-CX777ES R211 1-216-833-11 METAL CHIP 10K 5% 1/10W R212 1-216-821-11 METAL CHIP 1K 5% 1/10W R213 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R301 1-216-809-11 METAL CHIP 100 5% 1/10W R302 1-216-821-11 METAL CHIP 1K 5% 1/10W R303 1-216-831-11 METAL CHIP 6.8K 5% 1/10W R304 1-216-833-11 METAL CHIP 10K 5% 1/10W R306 1-216-833-11 METAL CHIP 10K 5% 1/10W R308 1-216-833-11 METAL CHIP 10K 5% 1/10W R309 1-216-821-11 METAL CHIP 1K 5% 1/10W When any part on the POWER board except the ones listed above needs to be replaced, replace the entire mounted board. ************************************************************** A-4733-703-A RS-232C BOARD, COMPLETE ************************ < CAPACITOR > C801 1-126-206-11 ELECT CHIP 100uF 20% 6.3V C807 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C808 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C809 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C810 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C811 1-124-779-00 ELECT CHIP 10uF 20% 16V C812 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C813 1-162-964-11 CERAMIC CHIP 0.001uF 10% 50V C814 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V C815 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V < CONNECTOR > CN801 1-573-806-21 PIN, CONNECTOR (1.5mm) (SMD) 6P CNP801 1-815-737-11 CONNECTOR, (D) SUB 9P (RS232C) < DIODE > D802 8-719-071-15 DIODE HZM6.8ZWA1TL < FERRITE BEAD > FB801 1-469-784-11 FERRITE 0uH FB802 1-469-784-11 FERRITE 0uH < FILTER > FL801 1-234-177-21 FILTER, CHIP EMI < IC > IC804 8-759-441-98 IC MAX3232CSE < JACK > * J801 1-764-188-11 JACK (SMALL TYPE) (DIA. 3.5) (S-LINK,CONTROL S IN) < RESISTOR > R806 1-216-864-11 SHORT CHIP 0 R808 1-216-864-11 SHORT CHIP 0 R809 1-216-864-11 SHORT CHIP 0 R811 1-216-864-11 SHORT CHIP 0 R814 1-216-864-11 SHORT CHIP 0 R815 1-216-801-11 METAL CHIP 22 5% 1/10W R816 1-216-809-11 METAL CHIP 100 5% 1/10W R817 1-216-809-11 METAL CHIP 100 5% 1/10W R818 1-216-825-11 METAL CHIP 2.2K 5% 1/10W R819 1-216-821-11 METAL CHIP 1K 5% 1/10W R820 1-208-782-11 METAL CHIP 1K 0.5% 1/10W < SWITCH > S801 1-692-989-11 SWITCH, SLIDE (COMMAND MODE) ************************************************************** A-4733-707-A SENSOR BOARD, COMPLETE *********************** < CAPACITOR > C81 1-107-826-11 CERAMIC CHIP 0.1uF 10% 16V < CONNECTOR > * CN81 1-506-486-11 PIN, CONNECTOR 7P CN82 1-506-481-11 PIN, CONNECTOR 2P CN83 1-506-481-11 PIN, CONNECTOR 2P < PHOTO INTERRUPTER > IC81 8-749-924-18 PHOTO INTERRUPTER RPI-1391 IC82 8-749-924-18 PHOTO INTERRUPTER RPI-1391 IC83 8-749-924-18 PHOTO INTERRUPTER RPI-1391 IC84 8-749-924-18 PHOTO INTERRUPTER RPI-1391 < RESISTOR > R81 1-216-649-11 METAL CHIP 820 0.5% 1/10W R82 1-216-649-11 METAL CHIP 820 0.5% 1/10W R83 1-216-649-11 METAL CHIP 820 0.5% 1/10W R84 1-216-649-11 METAL CHIP 820 0.5% 1/10W R85 1-208-778-11 METAL CHIP 680 0.5% 1/10W ************************************************************** MISCELLANEOUS ************** 2 1-827-575-11 WIRE (FLAT TYPE) (9 CORE) 3 1-827-583-11 WIRE (FLAT TYPE) (26 CORE) 4 1-827-585-11 WIRE (FLAT TYPE) (23 CORE) 5 1-827-584-11 WIRE (FLAT TYPE) (27 CORE) 56 1-827-576-11 WIRE (FLAT TYPE) (19 CORE) 0105 1-783-531-32 CORD, POWER 0501 A-6061-908-A OPTICAL PICK-UP KHM-290AAA (SERVICE ASSY) M601 A-4672-895-A MOTOR (400) ASSY (TABLE) M602 A-4672-895-A MOTOR (400) ASSY (LOADING) M603 1-541-632-12 MOTOR, DC (DOOR) 0T102 1-437-496-21 TRANSFORMER, POWER ************************************************************ ACCESSORIES ************ 1-477-979-11 COMMANDER, STANDARD (RM-DX700) 1-823-364-21 CORD, CONNECTION (AUDIO/VIDEO) 3-073-096-01 LID, BATTERY CASE (for RM-DX700) 4-249-720-12 MANUAL, INSTRUCTION (ENGLISH) 4-249-720-22 MANUAL, INSTRUCTION (FRENCH) POWER RS-232C SENSOR The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part num- ber specified. Les composants identifiés par une marque 0 sont critiques pour la sécurité. Ne les remplacer que par une pièce portant le numéro spécifié. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com DVP-CX777ES REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 1.0 2003.08 New www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com