INSTRUCTIONS GGT0045-001C-H AV-29LS24 AV-21CS24 AV-29LX14 AV-21CX14 AV-29VS24 AV-21DX14 AV-29VX54 AV-21LX14 AV-29VX74 AV-21VS24 AV-29WX14 AV-21VX14 AV-29WX24 AV-21VX54 AV-25LS24 AV-21VX74 AV-25LX14 AV-21WS24 AV-25VS24 AV-21WX14 AV-25VX54 AV-21YX14 AV-25VX74 Contents Knowing your TV’s features ....................................................... 3 Remote control buttons and basic functions .............................. 4 TV buttons and functions ........................................................... 6 Setting up your TV ..................................................................... 7 Basic setting for picture.............................................................. 9 Advanced setting for picture .....................................................11 Original features for picture...................................................... 12 Basic setting for sound............................................................. 14 Advanced setting for sound ..................................................... 15 Favorite channel and video setting .......................................... 16 Customized setting .................................................................. 17 TV channel presetting .............................................................. 19 Additional preparation .............................................................. 22 Troubleshooting ....................................................................... 23 Specifications ..............................................................Back cover COLOUR TELEVISION EQUALIZER • CINEMA SURROUND • COMPONENT INPUT Downloaded from www.Manualslib.com manuals search engine 2 15 cm 10 cm 10 cm 15 cm WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the mains plug. Do not pull on the power cord. 3 Never block or cover the ventilation openings. Never install the TV where good ventilation is unattainable. When installing this TV, leave spaces for ventilation around the TV of more than the minimum distances as shown. 4 Do not allow objects or liquid into the cabinet openings. 5 In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover. 6 The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it. 7 If you are not going to use this TV for a long period of time, be sure to disconnect the AC plug from the AC socket. 8 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. WARNING: A REMOVABLE PLASTIC COVER IS FIXED TO THE TELEVISION’S FRONT AUDIO/VIDEO CONNECTOR. TO PREVENT THIS COVER FROM BEING ACCIDENTALLY SWALLOWED BY BABIES OR CHILDREN, REMOVE IT FROM THE TELEVISION AND STORE IT IN A SAFE PLACE. IF THE COVER IS SWALLOWED SEEK THE ADVICE OF A DOCTOR IMMEDIATELY. Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. Downloaded from www.Manualslib.com manuals search engine 3 Knowing your TV’s features 5 1 2 4 3 6 Confirm your TV’s functions Some functions written in this instruction manual may not be available for your TV. Please see the chart below and check the functions that are equipped for your TV’s model number. The model number is indicated at the rear of your TV. When you press a button concerned to a function that is not available for your TV, it does not work and the logo “Ø” appears on the screen. For a function that is not available for your TV, it is not displayed in the menu. No. 1 (STEREO/IIII) – – – – – – – _ _ _ _ _ – – – – – 2 *PICTURE BOOSTER – – – – – – – – – – – – – – – – _ 3 *ECO – _ – _ _ _ _ – _ – – _ _ _ – – – 4,6 PIP control buttons (Green label) – – – – _ _ – – – – – – _ _ – – – 5,6 TELETEXT control buttons (Black label) – – – – – – _ _ _ _ _ _ _ _ – – – – PICTURE TILT _ _ – – _ – _ _ _ – – – _ – – – – – COMPRESS (16:9) _ _ _ _ _ _ _ _ _ _ – _ _ _ – _ – AV-29LX14 AV-29WX14 AV-25LX14 AV-21LX14 AV-21VX14 AV-21WX14 AV-29VX54 AV-25VX54 AV-21VX54 AV-29WX24 AV-29LS24 AV-29VS24 AV-25LS24 AV-21CS24 AV-25VS24 AV-21WS24 AV-21VS24 AV-29VX74 AV-25VX74 AV-21VX74 AV-21CX14 AV-21DX14 AV-21YX14 Model No. Function Main features PIP (Picture in Picture) You can view two different sources (e.g. TV programme and VCR sources) at the same time. TELETEXT You can view teletext programmes which are broadcasted by some TV channels. Teletext programme is an information in text form. A2/NICAM You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2 (STEREO / IIII) or NICAM Sound-multiplex system. FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press. AI ECO TV detects the brightness of your room and automatically adjust the picture brightness to a suitable level for a better eye care. AI VOLUME TV adjusts the volume automatically to the same level for all TV channels to avoid sudden change of the volume when selecting different TV channel. Downloaded from www.Manualslib.com manuals search engine 4 Remote control buttons and basic functions 8 2 ! 4 1 6 3 7 9 5 No. Press To 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5 / ∞ / 2 / 3 Select and adjust menu function. 4 CHANNEL -/+ Select the desired channel number. 5 VOLUME -/+ Adjust the volume level. 6 TV/VIDEO Select TV or video terminal input. 7 MUTING Turn off the volume. Press this button again to resume the volume. 8 DISPLAY Display the programme number or video terminal number, stereo/bilingual broadcast system and PR list (channel list) on the screen. You can select the channel using the PR list. 1 Press the DISPLAY button once to display the PR list. 2 Press 5 / ∞ / 2 / 3 buttons to choose a channel, then press the MENU/OK button. You can confirm the favorite channels in the PR list. The channels set to favorite channels are indicated with coloured mark. 9 0~9, -/-- Select the programme number. For two digits programme number, press -/--, then press the number button. ! RETURN+ a) Return to the frequently view channel with one touch. 1 Choose the channel you want to register. 2 Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears. To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears. b) Return to the previously viewed channel, if you have not set or have cancelled the Return channel as above. Downloaded from www.Manualslib.com manuals search engine 5 Remote control buttons and basic functions (continued) The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: Note: Some functions have the 4th menus as the sub-menus. To Display the MENU Display the top menu Display the 2nd menu Display the 3rd menu Return to the previous menu Choose the setting of a function Adjust the effect level of a function Display the sub menu of a function. Operation Press the MENU/OK button 2. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Press the DISPLAY button 8. Press 5/∞ buttons 3 to choose a function. Then press the 2/3 buttons 3 to change the setting. Press 5/∞ buttons 3 to choose a function. Then press the 2/3 buttons 3 to adjust the effect level. Press the 5/∞ buttons 3 to choose a function. Then press MENU/OK button 2 to display the sub menu. Note To exit the MENU, press the DISPLAY button 8 or choose EXIT menu. Press ∞ button 3 to display the next page for more functions. – Press the MENU/OK button 2 to exit from the menu. – Top menu 2nd menu Location 3rd menu Location MENU INPUT EXT. INPUT P.18 – – DISPLAY P.18 – – PICTURE PICTURE MODE P.9 – – PICTURE SETTING P.10 – – WHITE BALANCE P.10 – – PICTURE – VNR P.17 FEATURES FAVORITE CH SETTING P.16 VIDEO SETTING P.16 COLOUR SYSTEM P.9 PICTURE BOOSTER P.10 COMPRESS (16:9) P.11 PICTURE TILT P.11 SOUND STEREO/I III P.15 – – AI VOLUME P.15 – – SOUND MODE P.14 – – EQUALIZER P.15 – – BALANCE P.14 – – SOUND TURBO P.14 – – CINEMA SURROUND P.15 – – FEATURES OFF TIMER P.17 – – CHILD LOCK P.17 – – AI ECO SENSOR P.11 – – PIP – PIP,SUB INPUT,SWAP P.12 INSTALL AUTO PROGRAM P.19 – – EDIT/MANUAL P.19 DELETE, MOVE, P.19- MANUAL, INSERT P.20 LANGUAGE P.17 LANGUAGE P.17 BLUE BACK P.11 – – AUTO SHUTOFF P.18 – – VIDEO-2 SETTING P.18 – – AI ECO DISPLAY P.11 – – TEXT LANGUAGE P.13 TEXT LANGUAGE P.13 EXIT – – – – How to operate menus and menus locations MENU Top menu 2nd menu Top menu 3rd menu MENU 2nd menu *If you want to adjust PICTURE SETTING menu, you must set PICTURE MODE menu to USER. *If you want to adjust EQUALIZER menu, you must set SOUND MODE menu to USER. Downloaded from www.Manualslib.com manuals search engine 6 TV buttons and functions The illustrations shown below is for AV-29VS24 and AV-21CS24 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. IN (VIDEO-3) V R MENU OK L/MONO CHANNEL VOLUME TV/VIDEO EXIT POWER ! 9 8 7 6 5 2 3 4 1 Front of the TV AV-29VS24 Rear of the TV AV-29VS24 ! 9 8 7 6 4 IN (VIDEO-2) V R L / MONO POWER 2 1 OK CHANNEL VOLUME MENU V L R R L/MONO Y CB CR /V V S OVER L R /MONO OUTPUT VIDEO-1 COMPONENT (VIDEO-2) INPUT INPUT % $ # " V L R V L R /MONO OUTPUT VIDEO-1 INPUT % # " AV-21CS24 AV-21CS24 No. Button/terminal Description Page 1 L (main power) Press to turn on or turn off the TV’s main power. – 2 POWER lamp Indicate the TV is being turned on or off. – No colour : TV’s main power is being turned off. Red : TV’s main power is being turned on. Note: When you turn off the power switch while TV is in standby mode, the light of power lamp will be off in 10 -15 seconds. 3 ECO sensor – 4 Remote control sensor – 5 TV/VIDEO Press to select TV or video mode. – 6 VOLUME -/+ Press to adjust the volume level. – 7 CHANNEL -/+ Press to select the desired channel. – 8 MENU Press to display the menu. – 9 IN (VIDEO-3) Video and audio input jacks for VIDEO-3 mode. 22 IN (VIDEO-2) Video and audio input jacks for VIDEO-2 mode. 22 ! Headphone jack. 22 " Aerial socket. 7 # OUTPUT Video and audio output jacks. (The component video 22 signal cannot be output.) $ COMPONENT Video or component video, and audio input jacks for 22 (VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting the “VIDEO-2 SETTING” function (see page 18). % VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1 7 mode How to operate the menus with the TV button TV button Work as same as the button on the Note remote control unit MENU MENU/OK button To display main menu and exit menu after finish setting. CHANNEL -/+ ∞/5 button To select menu function. VOLUME -/+ 2/3 button To adjust the desired function. Downloaded from www.Manualslib.com manuals search engine 7 2 Connecting the compatible main plug to the AC outlet. Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. VHF/UHF outdoor aerial 75-ohm coaxial cable (not supplied) 1 Connecting the aerial cable. 3 Inserting batteries into the remote control. Insert two batteries by following the + and - polarities and inserting the - end first. CAUTION: Follow the cautions printed on the batteries. Notes: • Use AA/R6/UM-3 dry cell batteries. • If the remote control does not work properly, fit new batteries. The supplied batteries are for testing, not regular use. 4 Turn on the TV by pressing the main power button. JVC logo appears on the screen. V L R R L/MONO Y CB CR /V V S OVER L R /MONO OUTPUT VIDEO-1 INPUT To RF output To video output To S-video output To aerial input To audio output COMPONENT (VIDEO-2) INPUT Rear of TV AV-29VS24 VHF/UHF outdoor aerial VCR If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of the TV with the video cable (or S-VIDEO cable if available) and audio cables. For details, see the manual of your VCR. The illustration shown is just a sample. It may not be same as your TV. Downloaded from www.Manualslib.com manuals search engine 8 5 Making the initial settings Set up your TV by pressing any button except POWER button, then operate the TV menu by following the steps as below: • Press 5/∞ button to select your desired language*, then press MENU/OK button. • Press 5/∞ button to select your desired Teletext language group*. For details, see page 13. (For CS24/LS24/ VS24/VX74/WS24/ WX24 series only) • TV will start searching for the channels. To stop AUTO PROGRAM, press MENU/OK button. • Press the red button to cancel the SETUP TOUR RESTART function. If you want to make initial settings again when the next time you turn on the TV, press the MENU/OK button to activate the SETUP TOUR RESTART function. LANGUAGE ENGLISH êìëëäàâ FRANÇAIS TEXT LANGUAGE SETUP TOUR RESTART? AUTO PROGRAM AUTO PROGRAM OK CH 12 22% GROUP–1 GROUP–2 GROUP–3 GROUP–4 BACK I OK BACK I OK OK RESTART I NO EDIT BACK I IINSERT OK MOVE IDELETE IMANUAL PR CH/CC 7 CH 09 8 CH 11 9 I CH 13 3 10 11 12 13 Setting up your TV (continued) • To complete the initial setting, press the MENU/OK button. To edit the channel list, see page 19. If the JVC logo does not appear, use LANGUAGE, TEXT LANGUAGE, and AUTO PROGRAM functions to make the initial settings. Those functions are located in the INSTALL menu. If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings. * If the TEXT function is available for your TV and the LANGUAGE shown follow as ENGLISH/РУССКИЙ/ / /FRANÇAIS, you can select the TEXT LANGUAGE group from GROUP-1 to GROUP-4. If the TEXT function is available for your TV and the LANGUAGE shown follow as ENGLISH/РУССКИЙ/ /MELAYU/INDONESIA, you can select the TEXT LANGUAGE group from GROUP-1 to GROUP-3. Downloaded from www.Manualslib.com manuals search engine 9 COLOUR SYSTEM You can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. To operate this function with a menu: For the colour system in each country or region, see the table below: PICTURE MODE You can choose the desired picture setting with one-touch. Press the PICTURE MODE button to select a setting. SOFT Softens contrast and sharpness. BRIGHT Heightens contrast and sharpness. STANDARD Standard picture setting. USER You can change this picture setting as you like. Select USER and adjust following items in the PICTURE SETTING menu. (CONTRAST, BRIGHT, SHARP, COLOUR, TINT*) *TINT can only be adjusted in NTSC system. To operate this function with a menu: To return the USER setting to the default, press the blue button when the PICTURE SETTING menu appears. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. Basic setting for picture AUTO PAL SECAM NTSC3.58 NTSC4.43 MENU PICTURE menu PICTURE FEATURES menu COLOUR SYSTEM Area Country or Region System Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. PAL Indonesia, Malaysia, Singapore, Thailand, India, etc. Asia, Middle China, Vietnam, etc. PAL East Hong Kong, etc. PAL Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM Philippines, Taiwan, Myanmar, etc. NTSC Russia, etc. SECAM Europe Czech Republic, Poland, etc. PAL Germany, Holland, Belgium, etc. PAL UK, etc. PAL Oceania Australia, New Zealand, etc. PAL Republic of South Africa, etc. PAL Africa Nigeria, etc. PAL Egypt, Morocco, etc. SECAM MENU PICTURE menu PICTURE MODE ❇ ❇ Downloaded from www.Manualslib.com manuals search engine 10 Adjusting the picture – USER You can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu. 2 Select the PICTURE SETTING in PICTURE menu, then adjust the setting. CONTRAST 2 : Lower contrast 3 : Higher contrast BRIGHT 2 : Darker 3 : Brighter SHARP 2 : Softer 3 : Higher COLOUR 2 : Lighter 3 : Deeper TINT* 2 : Reddish 3 : Greenish *TINT can only be adjusted in NTSC system. PICTURE BOOSTER You can improve picture clarity when the picture is unclear due to the low signal reception. Press the PICTURE BOOSTER button to select the desired mode. HIGH Perform at maximum level. LOW Perform at minimum level. OFF Cancel the function To operate this function with a menu: Basic setting for picture (continued) MENU PICTURE menu PICTURE FEATURES menu PICTURE BOOSTER WHITE BALANCE You can change the white balance of the picture to better match the type of video being viewed. Select the WHITE BALANCE in the PICTURE menu, then choose the desired setting. NORMAL Normal white balance. COOL Bluish white. WARM Reddish white. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU PICTURE menu WHITE BALANCE MENU PICTURE menu PICTURE MODE USER MENU PICTURE menu PICTURE SETTING ❇ ❇ ❇ ❇ Downloaded from www.Manualslib.com manuals search engine 11 AI ECO SENSOR (ECO) You can adjust TV screen contrast according to the brightness of your room. Press the ECO button to select the desired mode. 1 Mild contrast (recommended). 2 Even contrast. OFF Cancel the function. To operate this function with a menu: You can display the graphic of AI ECO SENSOR on the screen. Select the AI ECO DISPLAY in the INSTALL menu, then choose ON or OFF. Correcting the Slanting Picture (PICTURE TILT) You can correct the picture tilt caused by the earth’s magnetic force. 1 Select the PICTURE TILT in the PICTURE FEATURES menu under PICTURE menu, then press MENU/OK button. The following display appears. 2 Press the 5/∞ buttons until the picture become level. Then press the MENU/OK button. COMPRESS (16:9) You can convert a normal picture (4:3 aspect ratio) into a wide picture (16:9 aspect ratio). Select the COMPRESS (16:9) in the PICTURE FEATURES menu under PICTURE menu, then choose ON or OFF. BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON or OFF. If you wish to continue viewing the poor picture, cancel the BLUE BACK function. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. Advanced setting for picture MENU FEATURES menu AI ECO SENSOR MENU PICTURE menu PICTURE FEATURES menu PICTURE TILT BACK I OK MENU PICTURE menu PICTURE FEATURES menu COMPRESS (16:9) MENU INSTALL menu BLUE BACK ❇ ❇ ❇ ❇ PICTURE TILT MENU INSTALL menu AI ECO DISPLAY ❇ Downloaded from www.Manualslib.com manuals search engine 12 PIP You can display a sub picture on the screen. Press the PIP operation buttons to display and change the sub picture setting. PIP Display the sub picture. To cancel, press the PIP button again. Notes: • You can hear the sound from the main picture only. • Main picture and sub picture will use different input sources, which are TV and VIDEO mode. When the same input source are selected, the sub picture input source will change as follows: Main picture Sub picture TV VIDEO-1 = VIDEO-2 = VIDEO-3 VIDEO-1 TV = VIDEO-2 = VIDEO-3 VIDEO-2 TV = VIDEO-1 = VIDEO-3 VIDEO-3 TV = VIDEO-1 = VIDEO-2 SUB-P -/+ Select the desired channel for sub picture. (Input) Select the input source for the sub picture. (Swap) Swap between the main picture and sub picture. (Position) Change the sub picture position. Each time you press on (Position) button, the sub picture position will change as follows: (Freeze) Freeze the sub picture to be still. To operate this function with a menu: When VIDEO-2 is set to component, you can’t select VIDEO-2 for sub picture. Original features for picture When VIDEO-2 is set to component, if the input source of main picture is set to VIDEO-2 with component, PIP button is disabled and sub picture can’t be displayed. TELETEXT You can watch the Teletext broadcast channel with TEXT function. 1 Press the TEXT button to select the desired mode as follows: 2 Press the CHANNEL -/+ buttons, number buttons or colour buttons to select other Teletext pages. 3 Press TEXT or TV/VIDEO button to return to TV mode. You can also operate the teletext using the following buttons: (Hold) Hold a teletext page. The (Hold) are displayed at the top left of the screen. To cancel, press (Hold) button again. (Reveal) Display the hidden text (e.g. answers to a quiz). To cancel, press (Reveal) button again. (Size) Enlarge the teletext display. (Index) Return to the index page instantly. (Cancel) Watch TV programme while waiting for a teletext page. When the teletext page is found, a page number appears at the upper left of the screen. Press (Cancel) to view the teletext page. (Sub-page) Operate the (Sub-page) function. Sub-page numbers are displayed at the left of the screen. To cancel sub-page function, press (Sub-page) button again. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. lower right lower left upper left upper right MENU FEATURES menu PIP TV mode TEXT mode MIX mode ❇ Downloaded from www.Manualslib.com manuals search engine 13 Original features for picture (continued) Using the List mode You can store and recall the favorite teletext pages in memory using the colour buttons. 1 In TEXT mode, press the MODE button to enter the List mode. 2 Press a colour button, then press the number buttons to enter the page number. 3 Press and hold down the (Store) button. The page number is blinking white to indicate that they are stored in memory. 4 To store other favorite teletext pages, repeat Step 2 to 3. To recall the favorite teletext page, press the MODE button, then press the colour button. To exit the List mode, press the MODE button again. When viewing teletext programme, menu operations are not available. If characters on a teletext programme do not appear properly, change the TEXT LANGUAGE setting. TEXT LANGUAGE You can set the Teletext language group that corresponds to the programmes. Select TEXT LANGUAGE in the INSTALL menu, then choose the desired language group. GROUP-1 English, German, Swedish / Finnish / Danish / Hungarian, Italian, French, Spanish / Portuguese, Turkish GROUP-2 Polish, German, Estonian, Slovenian, Czech / Slovakian, Rumanian GROUP-3 Polish, German, Estonian, Lettish, Russian, Ukrainian GROUP-4 English, French, Turkish, Arabic, Iranian Depending on the broadcast, the language set may not display properly. For details, see in page 8. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU INSTALL menu TEXT LANGUAGE ❇ Downloaded from www.Manualslib.com manuals search engine 14 SOUND SYSTEM You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally. Press the SOUND SYSTEM button to select a setting. This function is not available in video mode. For the sound system in each country or region, see the table below: Basic setting for sound B/G I D/K M Area Country or Region System Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. B/G Indonesia, Malaysia, Singapore, Thailand, India, etc. Asia, Middle China, Vietnam, etc. D/K East Hong Kong, etc. I Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G Philippines, Taiwan, Myanmar, etc. M Russia, etc. D/K Europe Czech Republic, Poland, etc. D/K Germany, Holland, Belgium, etc. B/G UK, etc. I Oceania Australia, New Zealand, etc. B/G Republic of South Africa, etc. I Africa Nigeria, etc. B/G Egypt, Morocco, etc. B/G SOUND MODE You can choose the desired sound setting. Select the SOUND MODE in SOUND menu, then choose the setting. USER You can change this sound setting as you like. Select USER and adjust the frequencies in EQUALIZER (100, 300, 1K, 3K, 8K Hz). For details, see “EQUALIZER” on page 15. DYNAMIC Emphasize on both vocal sound and music. MUSIC Emphasize on music effect. NEWS Emphasize on vocal sound. BALANCE You can adjust the volume balance between the left and right speakers. Select the BALANCE in SOUND menu, then adjust the setting. SOUND TURBO You can set the sound frequency to emphasize the low and high frequency levels. Press the SOUND TURBO to select ON or OFF. To operate this function with a menu: ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU SOUND menu SOUND MODE MENU SOUND menu BALANCE ❇ ❇ MENU SOUND menu SOUND TURBO ❇ Downloaded from www.Manualslib.com manuals search engine 15 CINEMA SURROUND You can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting. OFF Cancel the function. LOW Listen to sound with less wider audience effect. HIGH Listen to sound with more wider audience effect. MONO Listen to mono sound with stereo effect. To operate this function with a menu: If slight volume distortion occurs when you select HIGH mode, change the setting to LOW mode. The CINEMA SURROUND effect will be less noticeable. If you use CINEMA SURROUND and SOUND TURBO together, volume distortion might occurs. STEREO / IIII ( ) You can enjoy the stereo and bilingual broadcasted programmes. Press the button to select the desired mode. Select stereo sound. Select monaural sound. I Select bilingual I (sub I). II Select bilingual II (sub II). MONO Cancels the Multi Sound function, and the sound becomes monaural. This function is not available in video mode. To operate this function with a menu: Advanced setting for sound MENU SOUND menu CINEMA SURROUND MENU SOUND menu STEREO / IIII EQUALIZER You can adjust the sound frequencies when selecting USER mode in SOUND MODE. 1 Select the USER in SOUND MODE under SOUND menu. 2 Select the EQUALIZER in SOUND menu. The following display appears. 3 Select and adjust the desired frequencies. 4 Press the MENU/OK button to exit the menu. Adjust high frequency will affect higher pitch sound and vice versa. AI VOLUME You can adjust the volume of all the channels and video inputs to the same level automatically. Select the AI VOLUME in SOUND menu, then choose ON or OFF. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU SOUND menu SOUND MODE USER MENU SOUND menu EQUALIZER EQUALIZER IIIIIIIIIIII IIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII 100 300 1K 3K 8K Hz BACK I OK MENU SOUND menu AI VOLUME ❇ ❇ ❇ ❇ ❇ Downloaded from www.Manualslib.com manuals search engine 16 To register the favorite channel You can register and recall 4 favorite channels by using the colour buttons (red, green, yellow, blue). 1 In TV mode, select a TV channel (PR01-99) you desired to register. 2 Press and hold a colour button for 3 seconds or more. “FAVORITE CHANNEL I PROGRAMMED” appears on the screen and current channel is registered. 3 To register other favorite channels, repeat Step 1 to 2. To recall the favorite channel, press the colour button. When the TV is in Text mode, Picture in Picture or menu mode, favorite channel function is not available. To adjust favorite channel setting (FAVORITE CH SETTING) You can adjust the picture and sound settings for the favorite channels. 1 Display the PICTURE menu and select FAVORITE CH SETTING in PICTURE FEATURES menu. 2 Select FAVORITE CHANNEL in FAVORITE CH SETTING menu, then choose the desired favorite channel. 3 Select EFFECT, then press 2/3 button to choose ON. To cancel the settings, choose OFF. Favorite channel and video setting MENU PICTURE menu PICTURE FEATURES menu FAVORITE CH SETTING FAVORITE CH SETTING FAVORITE CHANNEL 4 Select the desired item that you wish to adjust. 5 Press the MENU/OK button to exit the menu. To adjust the video setting (VIDEO SETTING) You can adjust the picture and sound settings for video inputs. 1 Display the PICTURE menu and select VIDEO SETTING in PICTURE FEATURES menu. 2 Select VIDEO STATUS in VIDEO SETTING menu, then choose the desired video input. 3 Select EFFECT, then press 2/3 button to choose ON. To cancel the settings, choose OFF. 4 Select the desired item that you wish to adjust. 5 Press the MENU/OK button to exit the menu. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU PICTURE menu PICTURE FEATURES menu VIDEO SETTING VIDEO SETTING VIDEO STATUS CONTRAST BRIGHT SHARP COLOUR SOUND MODE (USER, DYNAMIC, MUSIC, NEWS) TINT ❇ ❇ ❇ ❇ CONTRAST BRIGHT SHARP COLOUR SOUND MODE (USER, DYNAMIC, MUSIC, NEWS) TINT FAVORITE CH SETTING FAVORITE CHANNEL I PR 01 CONTRAST BRIGHT SHARP COLOUR TINT SOUND MODE USER EFFECT ON BACK I OK VIDEO SETTING VIDEO STATUS VIDEO-1 CONTRAST BRIGHT SHARP COLOUR TINT SOUND MODE USER EFFECT ON BACK I IRESET OK Downloaded from www.Manualslib.com manuals search engine 17 VNR You can reduce the noise. Select the VNR in the PICTURE FEATURES menu under PICTURE menu, then choose a setting of VNR function. OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level. If you select MAX, the picture becomes softer even if the original picture is sharp. LANGUAGE You can choose your desired on screen display language. Select the LANGUAGE in the INSTALL menu, then choose a language. Customized setting MENU PICTURE menu PICTURE FEATURES menu MENU INSTALL menu LANGUAGE CHILD LOCK You can disable the front control buttons of the TV. Select the CHILD LOCK in the FEATURES menu, then choose ON or OFF. OFF TIMER You can set the TV to turn off automatically to standby mode after a set time. Press the OFF TIMER button to select a desired period of time. You can set the period of time to a maximum of 120 minutes in 10 minutes step. To operate this function with a menu: When the elapsed of time left one minute, “GOOD NIGHT!” appears on the screen. You can display the OFF TIMER menu again to confirm or change the remaining time. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU FEATURES menu CHILD LOCK OFF TIMER 0 120 10 BACK I OK MENU FEATURES menu OFF TIMER ❇ ❇ ❇ ❇ VNR Downloaded from www.Manualslib.com manuals search engine 18 AUTO SHUTOFF You can set the TV to turn off automatically when no signal is received for about 15 minutes or longer after the end of a broadcast. Select AUTO SHUTOFF in INSTALL menu, then choose ON or OFF. The AUTO SHUTOFF function does not turn off the TV’s main power. The AUTO SHUTOFF function is not available in video mode. VIDEO-2 SETTING You can set the VIDEO-2 SETTING according to the video signal output from the external devices connected to the VIDEO-2 terminal. Select the VIDEO-2 SETTING in INSTALL menu, then choose a setting. VIDEO If a normal video signal (composite video signal) is input. COMPONENT If a component video signal (Y/CB/CR) is input. For connecting methods, see “Additional Preparation” on page 22. Customized setting (continued) MENU INSTALL menu AUTO SHUTOFF MENU INPUT menu EXT. INPUT EXT. INPUT (TV/VIDEO) You can select TV or video terminal input with one touch. Press the TV/VIDEO button to select an input. To operate this function with a menu: DISPLAY You can display the programme number, video terminal number and PR list on the screen. Press the DISPLAY button to select the desired mode: Choose a TV channel or a VIDEO terminal. 1 Press the DISPLAY button to display the PR LIST. 2 Select a programme number or video terminal by pressing the 5/∞ button to move up/down on the programme number or press the 2/3 button to skip for each 7 programme numbers, then press MENU/OK button. To operate this function with a menu: ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU INPUT menu DISPLAY ❇ ❇ ❇ MENU INSTALL menu VIDEO-2 SETTING ❇ ON OFF PR LIST PR LIST -7 OK +7 PR CH/CC AV 1 CH 03 2 CH 05 3 CH 07 4 CH 09 5 CC 04 6 CC 05 Downloaded from www.Manualslib.com manuals search engine 19 To register the TV channels automatically You can register the TV channels into the TV’s channel list automatically. 1 Display the INSTALL menu. 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR LIST) automatically. 3 “SETUP TOUR RESTART?” appears. To start the SETUP Press the MENU/OK button. Then proceed to TOUR step 5 of “Setting up your TV” on page 8. To skip the SETUP Press the Red button. TOUR 4 The EDIT menu appears. To edit the channel Proceed to the Step 3 of “To edit the channel list list (PR LIST)” on page 20. If a channel is not Proceed to the Step 3 of “To register the TV registered channels manually” on this page. To exit the menu Press the MENU/OK button. For details of “SETUP TOUR”, see page 8. To register the TV channels manually (MANUAL in the EDIT menu) You can register the TV channels into the TV’s channel list manually. 1 Display the INSTALL menu. TV channel presetting 2 Choose EDIT/MANUAL, then press the MENU/OK button. EDIT menu appears. 3 Choose the channel which you want to register. 4 Press the blue button to activate the MANUAL function. The sound system of the channel appears at the right of the CH/CC number. 5 Press the 3 button to choose an appropriate sound system. For details, see “SOUND SYSTEM” on page 14. 6 Press the green or red button to search for the TV channel. Searching stops when a channel is found and displayed. 7 Repeat step 5 until your desired TV channel appears. If the reception is poor Press the blue or yellow button to fine tune the TV channel. If noisy sound is heard Press the 3 button to choose an appropriate sound system. 8 Press the MENU/OK button to exit the menu. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. EDIT BACK I IINSERT OK MOVE IDELETE IMANUAL PR CH/CC 7 CH 09 8 CH 11 9 I CH 13 3 10 11 12 13 MENU INSTALL menu ❇ MENU INSTALL menu ❇ Downloaded from www.Manualslib.com manuals search engine 20 To add in the new channel (INSERT in the EDIT menu) You can add in the new channel in the TV channel list as you like. You need to find the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from the attached sheet “CH/CC number list” on page 21. 1 Display the INSTALL menu. 2 Choose EDIT/MANUAL, then press the MENU/OK button. EDIT menu appears. 3 Choose the PR number for which you will register a new TV channel. When you add a new TV channel of NTSC-M system, press the SOUND SYSTEM button to change the sound system to M. Then proceed to the next step. 4 Press the green button, then press 5/∞ buttons to choose “CC” or “CH”. 5 Press the number button to enter the remaining CH/CC number. The TV starts to search the TV channel, and the picture of the TV channel appears. If the TV finds no TV channel, a noisy picture appears. When a TV channel has already been registered in PR99, using the INSERT function deletes that TV channel. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. TV channel presetting (continued) To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu) You can edit the TV channel list as you like. Note: After this operation, other channel’s PR numbers will be changed. 1 Display the INSTALL menu. 2 Choose EDIT/MANUAL, then press the MENU/OK button. EDIT menu appears. 3 Choose the channel which you want to change PR number, or delete. 4 Do the following action: To change the PR Press the 3 button. Then move it to the PR number (MOVE) number you want to use it for the channel. Finally press the 2 button. To delete the Press the yellow button. channel (DELETE) 5 Press the MENU/OK button to exit the menu. EDIT BACK I IINSERT OK MOVE IDELETE IMANUAL PR CH/CC 7 CH 09 8 CH 11 9 I CH 13 3 10 11 12 13 MENU INSTALL menu ❇ MENU INSTALL menu ❇ Downloaded from www.Manualslib.com manuals search engine 21 TV channel presetting (continued) CH/CC number When you want to use the INSERT function on page 20, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country US United States, Philippines, etc.. CCIR Middle East, Southeast Asia, etc.. OIRT Eastern Europe, Russia, Vietnam, etc.. AUSTRALIA Australia, etc.. Channel CH US CCIR OIRT AUSTRALIA CH 02 US-2 E2 R1 AU-0 CH 03 US-3 E3 AU-1 CH 04 US-4 E4 R2 AU-2 CH 05 US-5 E5 R6 AU-6 CH 06 US-6 E6 R7 AU-7 CH 07 US-7 E7 R8 AU-8 CH 08 US-8 E8 R9 AU-9 CH 09 US-9 E9 CH 10 US-10 E10 R10 AU-10 CH 11 US-11 E11 R11 AU-11 CH 12 US-12 E12 R12 CH 13 US-13 CH 14 US-14, W+29 CH 15 US-15, W+30 CH 16 US-16, W+31 CH 17 US-17, W+32 CH 18 US-18, W+33 CH 19 US-19, W+34 CH 20 US-20, W+35 CH 21 US-21, W+36 E21 CH 22 US-22, W+37 E22 CH 23 US-23, W+38 E23 CH 24 US-24, W+39 E24 CH 25 US-25, W+40 E25 CH 26 US-26, W+41 E26 CH 27 US-27, W+42 E27 CH 28 US-28, W+43 E28 CH 29 US-29, W+44 E29 CH 30 US-30, W+45 E30 CH 31 US-31, W+46 E31 CH 32 US-32, W+47 E32 CH US CCIR OIRT AUSTRALIA CH 33 US-33, W+48 E33 CH 34 US-34, W+49 E34 CH 35 US-35, W+50 E35 CH 36 US-36, W+51 E36 CH 37 US-37, W+52 E37 CH 38 US-38, W+53 E38 CH 39 US-39, W+54 E39 CH 40 US-40, W+55 E40 CH 41 US-41, W+56 E41 CH 42 US-42, W+57 E42 CH 43 US-43, W+58 E43 CH 44 US-44, W+59 E44 CH 45 US-45, W+60 E45 CH 46 US-46, W+61 E46 CH 47 US-47, W+62 E47 CH 48 US-48, W+63 E48 CH 49 US-49, W+64 E49 CH 50 US-50, W+65 E50 CH 51 US-51, W+66 E51 CH 52 US-52, W+67 E52 CH 53 US-53, W+68 E53 CH 54 US-54, W+69 E54 CH 55 US-55, W+70 E55 CH 56 US-56, W+71 E56 CH 57 US-57, W+72 E57 CH 58 US-58, W+73 E58 CH 59 US-59, W+74 E59 CH 60 US-60, W+75 E60 CH 61 US-61, W+76 E61 CH 62 US-62, W+77 E62 CH 63 US-63, W+78 E63 CH 64 US-64, W+79 E64 CH 65 US-65, W+80 E65 CH 66 US-66, W+81 E66 CH 67 US-67, W+82 E67 CH 68 US-68, W+83 E68 CH 69 US-69, W+84 E69 CC US CCIR OIRT AUSTRALIA CC 01 S-1 AU-5 CC 02 S-2 CC 03 S-3 CC 04 S-4 CC 05 S-5 CC 06 S-6 AU-5A CC 07 S-7 CC 08 S-8 CC 09 S-9 CC 10 S-10 CC 11 S-11 CC 12 S-12 CC 13 S-13 CC 14 A S-14 CC 15 B S-15 CC 16 C S-16 CC 17 D S-17 CC US CCIR OIRT AUSTRALIA CC 18 E S-18 CC 19 F S-19 CC 20 G S-20 CC 21 H S-21 CC 22 I S-22 CC 23 J S-23 CC 24 K S-24 CC 25 L S-25 CC 26 M S-26 CC 27 N S-27 CC 28 O S-28 CC 29 P S-29 CC 30 Q S-30 CC 31 R S-31 CC 32 S S-32 CC 33 T S-33 CC 34 U S-34 CC 35 V S-35 CC 36 W S-36 CC 37 W+1 S-37 CC 38 W+2 S-38 CC 39 W+3 S-39 CC 40 W+4 S-40 CC 41 W+5 S-41 CC 42 W+6 CC 43 W+7 CC 44 W+8 CC 45 W+9 CC 46 W+10 CC 47 W+11 CC 48 W+12 CC 49 W+13 CC 50 W+14 CC 51 W+15 CC 52 W+16 CC 53 W+17 CC 54 W+18 CC 55 W+19 CC 56 W+20 CC 57 W+21 CC 58 W+22 CC 59 W+23 CC 60 W+24 CC 61 W+25 CC 62 W+26 CC 63 W+27 CC 64 W+28 CC 75 X CC 76 Y R3 CC 77 Z R4 AU-3 CC 78 Z+1 R5 CC 79 Z+2 AU-4 CC 95 A-5 CC 96 A-4 CC 97 A-3 CC 98 A-2 CC 99 A-1 Downloaded from www.Manualslib.com manuals search engine 22 V L R V L R /MONO OUTPUT VIDEO-1 INPUT V L R R L/MONO Y CB CR /V V S OVER L R /MONO OUTPUT VIDEO-1 INPUT COMPONENT (VIDEO-2) INPUT The illustrations shown in this section are for AV-29VS24 and AV-21CS24 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices including the TV. • Note that connecting cables are not supplied. Connecting to front video input terminal Additional preparation Connecting to rear component/video input terminal and output terminal IN (VIDEO-2) V R L / MONO IN (VIDEO-3) V MENU OK OK MENU L/MONO R Front of TV Headphones AV-29VS24 AV-21CS24 Camcorder or TV game When you use VIDEO-1 INPUT, you should choose to connect S-VIDEO or video input. If S-VIDEO connector and video input are connected at the same time, no picture displays on the screen and the message “PLEASE DISCONNECT VIDEO-1 CABLE!” appears. In this case, you should disconnect either S-VIDEO or video input. When connecting to COMPONENT (VIDEO-2) input, depending on the connection, choose the appropriate video input using the menu (see page 18). Rear of TV Rear of TV AV-29VS24 AV-21CS24 VCR (for playing) DVD player (composite signals) VCR (for recording) DVD player (component video signals) VCR (for playing) VCR (for recording) Downloaded from www.Manualslib.com manuals search engine 23 Troubleshooting If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair. • Deactivate the BLUE BACK function if it is turned on. • Choose the appropriate sound system. Refer to “SOUND SYSTEM” on page 14. • Check the aerial cable and its connection with the TV. • Interference occurs caused by other devices such as an amplifier, personal computer, or a hair drier. Move such devices away from your TV. • Interference occurs caused by signal reflecting from mountains or building. Try to adjust the aerial’s direction or use a better directionality antenna. • Choose the appropriate colour system. Refer to “COLOUR SYSTEM” on page 9. • Adjust the COLOUR or BRIGHT setting. Refer to “Adjusting the picture - USER” on page 10. • Inevitable phenomenon due to the nature of the picture tube. This is not a malfunction. • This is due to the condition of the video signal whereby the image was not recorded properly. This is not a malfunction. • Adjust the sound frequency properly. Refer to “EQUALIZER” on page 15. • TV channel reception is poor. Change the stereo/ bilingual mode to mono sound (see page 15). • No picture, no sound • Snowy picture • Stripes appear on the picture • Double-pictures (ghosting) occur • Poor picture • White and bright still image look as if it were coloured • Top of the image from software products or video tape is distorted • Poor sound • Stereo or bilingual sound is unclear • The batteries may be exhausted. Replace with new batteries (see page 7). • Ensure that you are operating the remote less than seven meters from the front of your TV. • Press TV/VIDEO button to return to TV mode and try operating the menus. • Deactivate the CHILD LOCK function if it is turned on (see page 17). • This may due to the AUTO SHUT OFF function is activated. Press the POWER button to turn on the TV. • This may due to the magnetized device such as a speaker near to your TV. Keep the device apart from your TV. Alternately, you can also use the magnetic-shielded speaker. • This may due to the earth magnetism. Refer to “PICTURE TILT” on page 11 to correct the tilt. • Image required time to stabilize before display. This is not a malfunction. • This is due to a sudden change in temperature and it is not a malfunction. If the crackling sound is too frequent, request your service technician for inspection. • This is due to the static electricity of the picture tube and it will not harm the human body. This is not a malfunction. • Cannot operate the remote control • Cannot operate the menus • Cannot operate the front control buttons • TV is turned off suddenly • Colour patches appear at the corner of the screen • Picture is tilted • Image takes a short period to be displayed • TV may emitted crackling sound • Feel a slight electric shock when touching the TV screen Downloaded from www.Manualslib.com manuals search engine VICTOR COMPANY OF JAPAN, LIMITED © 2004 VICTOR COMPANY OF JAPAN, LIMITED 0504-FLE-JMT Specifications TV RF systems B, G, I, D, K, M Colour systems PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output VIDEO-1: S-video input*, VIDEO input, AUDIO L/R input VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input (Except for AV-21CS24/ AV-21CX14/AV-21YX14) VIDEO-3: VIDEO input, AUDIO L/R input (Except for AV-21CS24/AV-21CX14/AV-21YX14) OUTPUT: VIDEO output, AUDIO L/R output Headphone jack: Stereo mini jack (3.5 mm diameter) *Except for AV-29LS24/AV-29LX14/AV-25LS24/AV-25LX14/AV-21CS24/AV-21CX14/AV-21DX14/AV-21LX14/AV-21YX14. **Sound-multiplex systems A2 or NICAM (B/G, I, D/K) **Teletext system FLOF (Fastext), WST (World Standard Text) **Language displayed by teletext Please see the table in the description “TEXT LANGUAGE” on page 13. **Depends on the models, STEREO/IIII function for the Sound-multiplex systems or Teletext function may not be available. Please confirm with the chart on page 3. Design and specifications subject to change without notice. Downloaded from www.Manualslib.com manuals search engine INSTRUCTIONS GGT0050-001C-H Contents Knowing your TV’s features ....................................................... 3 Remote control buttons and basic functions .............................. 4 TV buttons and functions ........................................................... 6 Setting up your TV ..................................................................... 7 Basic setting for picture.............................................................. 9 Advanced setting for picture .....................................................11 Original features for picture...................................................... 12 Basic setting for sound............................................................. 14 Advanced setting for sound ..................................................... 15 Favorite channel and video setting .......................................... 16 Customized setting .................................................................. 17 TV channel presetting .............................................................. 19 Additional preparation .............................................................. 22 Troubleshooting ....................................................................... 23 Specifications ..............................................................Back cover EQUALIZER • CINEMA SURROUND • COMPONENT INPUT 5/25/04, 1:33 PM Downloaded from www.Manualslib.com manuals search engine OT URE. HE THIS TV. f the TV. lugging the the TV of nician. Do reful with it , wipe it leaner or 7 If you are not going to use this TV for a long period of time, be sure to disconnect the AC plug from the AC socket. 8 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. WARNING: A REMOVABLE PLASTIC COVER IS FIXED TO THE TELEVISION’S FRONT AUDIO/VIDEO CONNECTOR. TO PREVENT THIS COVER FROM BEING ACCIDENTALLY SWALLOWED BY BABIES OR CHILDREN, REMOVE IT FROM THE TELEVISION AND STORE IT IN A SAFE PLACE. IF THE COVER IS SWALLOWED SEEK THE ADVICE OF A DOCTOR IMMEDIATELY. or buying this JVC colour television. our new TV, please read this manual thoroughly before you begin. 5/25/04, 1:33 PM Downloaded from www.Manualslib.com manuals search engine 3 s ns his instruction manual may not be available for your TV. and check the functions that are equipped for your TV’s model number. The at the rear of your TV. When you press a button concerned to a function that is does not work and the logo “Ø” appears on the screen. For a function that is is not displayed in the menu. _ _ _ – _ _ _ _ – – – – – _ – – – – – – – – – – – – _ – _ _ _ _ _ – – _ _ – – _ – – _ _ _ _ – – – – – – – – – – _ – – – _ – – – _ _ – – – _ _ _ _ _ _ _ – _ _ _ _ _ – _ AV-2984VE AV-2983VE AV-2584VE AV-2184VE AV-2583VE AV-2183VE AV-2174VE AV-2954WE AV-2953WE AV-2554LE AV-2154LE AV-2553LE AV-2144LE AV-25LS24 AV-2154CE AV-2154WE AV-2153WE AV-2934WE AV-2934LE AV-2534LE AV-2134WE AV-2134YE AV-29LS24 u can view two different sources (e.g. TV programme and VCR sources) at the same e. u can view teletext programmes which are broadcasted by some TV channels. Teletext ogramme is an information in text form. u can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2 NICAM Sound-multiplex system. u can register up to four favorite channels for quick recall with one press. detects the brightness of your room and automatically adjust the picture brightness to a itable level for a better eye care. adjusts the volume automatically to the same level for all TV channels to avoid sudden ange of the volume when selecting different TV channel. 5/25/04, 1:33 PM Downloaded from www.Manualslib.com manuals search engine d basic functions . tion. lume. terminal number, stereo/bilingual broadcast system list. play the PR list. a channel, then press the MENU/OK button. the PR list. The channels set to favorite channels are digits programme number, press -/--, then press the with one touch. gister. ntil “RETURN PLUS PROGRAMMED!” appears. button until “RETURN PLUS CANCELED!” appears. nel, if you have not set or have cancelled the Return 5/25/04, 1:33 PM Downloaded from www.Manualslib.com manuals search engine 5 ontinued) is manual, ote MENU, DISPLAY or choose u. utton 3 to e next page unctions. – MENU/OK to exit from . – Top menu 2nd menu Location 3rd menu Location MENU INPUT EXT. INPUT P.18 – – DISPLAY P.18 – – PICTURE PICTURE MODE P.9 – – PICTURE SETTING P.10 – – WHITE BALANCE P.10 – – PICTURE – VNR P.17 FEATURES FAVORITE CH SETTING P.16 VIDEO SETTING P.16 COLOUR SYSTEM P.9 PICTURE BOOSTER P.10 COMPRESS (16:9) P.11 PICTURE TILT P.11 SOUND STEREO/IIII P.15 – – AI VOLUME P.15 – – SOUND MODE P.14 – – EQUALIZER P.15 – – BALANCE P.14 – – SOUND TURBO P.14 – – CINEMA SURROUND P.15 – – FEATURES OFF TIMER P.17 – – CHILD LOCK P.17 – – AI ECO SENSOR P.11 – – PIP – PIP,SUB INPUT,SWAP P.12 INSTALL AUTO PROGRAM P.19 – – EDIT/MANUAL P.19 DELETE, MOVE, P.19- MANUAL,INSERT P.20 LANGUAGE P.17 LANGUAGE P.17 BLUE BACK P.11 – – AUTO SHUTOFF P.18 – – VIDEO-2 SETTING P.18 – – AI ECO DISPLAY P.11 – – TEXT LANGUAGE P.13 TEXT LANGUAGE P.13 EXIT – – – – *If you want to adjust PICTURE SETTING menu, you must set PICTURE MODE menu to USER. *If you want to adjust EQUALIZER menu, you must set SOUND MODE menu to USER. 5/25/04, 1:33 PM Downloaded from www.Manualslib.com manuals search engine No. Button/terminal Description Page 1 L (main power) Press to turn on or turn off the TV’s main power. – 2 POWER lamp Indicate the TV is being turned on or off. – No colour: TV’s main power is being turned off. Red : TV’s main power is being turned on. Note: When you turn off the power switch while TV is in standby mode, the light of power lamp will be off in 10 -15 seconds. 3 ECO sensor – 4 Remote control sensor – 5 TV/ VIDEO Press to select TV or video mode. – 6 VOLUME -/+ Press to adjust the volume level. – 7 CHANNEL -/+ Press to select the desired channel. – 8 MENU Press to display the menu. – 9 IN (VIDEO-3) Video and audio input jacks for VIDEO-3 mode. 22 IN (VIDEO-2) Video and audio input jacks for VIDEO-2 mode. 22 Ä Headphone jack. 22 Å Aerial socket. 7 Ç OUTPUT Video and audio output jacks. (The component video signal cannot be output.) 22 É COMPONENT Video or component video, and audio input jacks for (VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting the “VIDEO-2 SETTING” function (see page 18). 22 Ñ VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1 mode 7 Ö TIMER lamp Indicate the OFF TIMER function is being turned on or off. – No colour: The OFF TIMER function is being turned off. Orange : The OFF TIMER function is being turned on. How to operate the menus with the TV button TV button Work as same as the button on the Note remote control unit MENU MENU/OK button To display main menu and exit menu after finish setting. CHANNEL -/+ ∞/5 button To select menu function. VOLUME -/+ 2/3 button To adjust the desired function. 5/25/04, 1:33 PM Downloaded from www.Manualslib.com manuals search engine 7 r VCR nnect the he TV dio as your 2 Connecting the compatible main plug to the AC outlet. 3 Inserting batteries into the remote control. Insert two batteries by following the + and - polarities and inserting the - end first. CAUTION: Follow the cautions printed on the batteries. Notes: • Use AA/R6/UM-3 dry cell batteries. • It the remote control does not work properly, fit new batteries. The supplied batteries are for testing, not regular use. 4 Turn on the TV by pressing the main power button. JVC logo appears on the screen. rial cting. aerial lied) 5/25/04, 1:33 PM Downloaded from www.Manualslib.com manuals search engine tton, then operate the TV menu by following the steps as below: • TV will start searching for the channels. To stop AUTO PROGRAM, press MENU/OK button. • Press the red button to cancel the SETUP TOUR RESTART function. If you want to make initial settings again when the next time you turn on the TV, press the MENU/OK button to activate the SETUP TOUR RESTART function. SETUP TOUR RESTART? AUTO PROGRAM AUTO PROGRAM OK CH 12 22% OK RESTART I NO EDIT BACK I IINSERT OK MOVE IDELETE IMANUAL PR CH/CC 7 CH 09 8 CH 11 9 I CH 13 3 10 11 12 13 . • To complete the initial setting, press the MENU/OK button. To edit the channel list, see page 19. T LANGUAGE, and AUTO PROGRAM functions to make the initial settings. ial settings, press the TV/VIDEO button to exit from initial settings. d language as follow: 5/25/04, 1:33 PM Downloaded from www.Manualslib.com manuals search engine 9 picture is table PICTURE MODE You can choose the desired picture setting with one-touch. Press the PICTURE MODE button to select a setting. SOFT Softens contrast and sharpness. BRIGHT Heightens contrast and sharpness. STANDARD Standard picture setting. USER You can change this picture setting as you like. Select USER and adjust following items in the PICTURE SETTING menu. (CONTRAST, BRIGHT, SHARP, COLOUR, TINT*) *TINT can only be adjusted in NTSC system. To operate this function with a menu: To return the USER setting to the default, press the blue button when the PICTURE SETTING menu appears. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. menu System PAL PAL PAL SECAM NTSC SECAM PAL PAL PAL PAL PAL PAL SECAM MENU PICTURE menu PICTURE MODE ❇ 5/25/04, 1:33 PM Downloaded from www.Manualslib.com manuals search engine g USER E menu. en adjust st ar due ired ES menu WHITE BALANCE You can change the white balance of the picture to better match the type of video being viewed. Select the WHITE BALANCE in the PICTURE menu, then choose the desired setting. NORMAL Normal white balance. COOL Bluish white. WARM Reddish white. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU PICTURE menu WHITE BALANCE ING ❇ 5/25/04, 1:33 PM Downloaded from www.Manualslib.com manuals search engine 11 htness of screen. choose TILT) etic force. S menu . 2 Press the 5/∞ buttons until the picture become level. Then press the MENU/OK button. COMPRESS (16:9) You can convert a normal picture (4:3 aspect ratio) into a wide picture (16:9 aspect ratio). Select the COMPRESS (16:9) in the PICTURE FEATURES menu under PICTURE menu, then choose ON or OFF. BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON or OFF. If you wish to continue viewing the poor picture, cancel the BLUE BACK function. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. re ES menu MENU PICTURE menu PICTURE FEATURES menu COMPRESS (16:9) MENU INSTALL menu BLUE BACK ❇ ❇ 6/8/04, 4:02 PM Downloaded from www.Manualslib.com manuals search engine he sub cture only. rent input . the sub DEO-3 cture. n, the sub IDEO-2 e When VIDEO-2 is set to component, if the input source of main picture is set to VIDEO-2 with component, PIP button is disabled and sub picture can’t be displayed. TELETEXT You can watch the Teletext broadcast channel with TEXT function. 1 Press the TEXT button to select the desired mode as follows: 2 Press the CHANNEL -/+ buttons, number buttons or colour buttons to select other Teletext pages. 3 Press TEXT or TV/VIDEO button to return to TV mode. You can also operate the teletext using the following buttons: (Hold) Hold a teletext page. The (hold) are displayed at the top left of the screen. To cancel, press (Hold) button again. (Reveal) Display the hidden text (e.g. answers to a quiz). To cancel, press (Reveal) button again. (Size) Enlarge the teletext display. (Index) Return to the index page instantly. (Cancel) Watch TV programme while waiting for a teletext page. When the teletext page is found, a page number appears at the upper left of the screen. Press (Cancel) to view the teletext page. (Sub-page) Operate the (Sub-page) function. Sub-page numbers are displayed at the left of the screen. To cancel sub-page function, press (Sub-page) button again. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. TV mode TEXT mode MIX mode 6/8/04, 4:02 PM Downloaded from www.Manualslib.com manuals search engine 13 emory ist mode. to enter y are o 3. ton, then t available. perly, TEXT LANGUAGE You can set the Teletext language group that corresponds to the programmes. Select TEXT LANGUAGE in the INSTALL menu, then choose the desired language group. GROUP-1 English, German, Swedish / Finnish / Danish / Hungar- ian, Italian, French, Spanish / Portuguese, Turkish GROUP-2 Polish, German, Estonian, Slovenian, Czech / Slovakian, Rumanian GROUP-3 Polish, German, Estonian, Lettish, Russian, Ukrainian Depending on the broadcast, the language set may not display properly. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU INSTALL menu TEXT LANGUAGE ❇ 6/8/04, 4:02 PM Downloaded from www.Manualslib.com manuals search engine rmal table System B/G D/K I B/G M D/K D/K B/G I B/G I B/G B/G SOUND MODE You can choose the desired sound setting. Select the SOUND MODE in SOUND menu, then choose the setting. USER You can change this sound setting as you like. Select USER and adjust the frequencies in EQUALIZER (100, 300, 1K, 3K, 8K Hz). For details, see “EQUALIZER” on page 15. DYNAMIC Emphasize on both vocal sound and music. MUSIC Emphasize on music effect. NEWS Emphasize on vocal sound. BALANCE You can adjust the volume balance between the left and right speakers. Select the BALANCE in SOUND menu, then adjust the setting. SOUND TURBO You can set the sound frequency to emphasize the low and high frequency levels. Press the SOUND TURBO to select ON or OFF. To operate this function with a menu: ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU SOUND menu SOUND MODE MENU SOUND menu BALANCE ❇ ❇ MENU SOUND menu SOUND TURBO ❇ 6/8/04, 4:02 PM Downloaded from www.Manualslib.com manuals search engine 15 g. e effect. ce effect. . mode, UND ogether, rammes. he sound d D EQUALIZER You can adjust the sound frequencies when selecting USER mode in SOUND MODE. 1 Select the USER in SOUND MODE under SOUND menu. 2 Select the EQUALIZER in SOUND menu. The following display appears. 3 Select and adjust the desired frequencies. 4 Press the MENU/OK button to exit the menu. Adjust high frequency will affect higher pitch sound and vice versa. AI VOLUME You can adjust the volume of all the channels and video inputs to the same level automatically. Select the AI VOLUME in SOUND menu, then choose ON or OFF. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU SOUND menu SOUND MODE USER MENU SOUND menu EQUALIZER EQUALIZER IIIIIIIIIIII IIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIII 100 300 1K 3K 8K Hz BACK I OK . MENU SOUND menu AI VOLUME ❇ ❇ ❇ 6/8/04, 4:02 PM Downloaded from www.Manualslib.com manuals search engine the to register. . on the . mode, channels. H ING o setting RES menu 4 Select the desired item that you wish to adjust. 5 Press the MENU/OK button to exit the menu. To adjust the video setting (VIDEO SETTING) You can adjust the picture and sound settings for video inputs. 1 Display the PICTURE menu and select VIDEO SETTING in PICTURE FEATURES menu. 2 Select VIDEO STATUS in VIDEO SETTING menu, then choose the desired video input. 3 Select EFFECT, then press 2/3 button to choose ON. To cancel the settings, choose OFF. 4 Select the desired item that you wish to adjust. 5 Press the MENU/OK button to exit the menu. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU PICTURE menu PICTURE FEATURES menu VIDEO SETTING VIDEO SETTING VIDEO STATUS CONTRAST BRIGHT SHARP COLOUR SOUND MODE (USER, DYNAMIC, MUSIC, NEWS) TINT ❇ ❇ CONTRAST BRIGHT SHARP COLOUR SOUND MODE (USER, DYNAMIC, MUSIC, NEWS) TINT TING EL I PR 01 USER ON VIDEO SETTING VIDEO STATUS VIDEO-1 CONTRAST BRIGHT SHARP COLOUR TINT SOUND MODE USER EFFECT ON BACK I IRESET OK 6/8/04, 4:02 PM Downloaded from www.Manualslib.com manuals search engine 17 er . original e. se a RES menu CHILD LOCK You can disable the front control buttons of the TV. Select the CHILD LOCK in the FEATURES menu, then choose ON or OFF. OFF TIMER You can set the TV to turn off automatically to standby mode after a set time. Press the OFF TIMER button to select a desired period of time. You can set the period of time to a maximum of 120 minutes in 10 minutes step. To operate this function with a menu: When the elapsed of time left one minute, “GOOD NIGHT!” appears on the screen. You can display the OFF TIMER menu again to confirm or change the remaining time. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. MENU FEATURES menu CHILD LOCK OFF TIMER 0 120 10 BACK I OK . MENU FEATURES menu OFF TIMER ❇ ❇ 6/8/04, 4:02 PM Downloaded from www.Manualslib.com manuals search engine nal is a ON or main ode. eo signal O-2 hoose a o signal) is input. n page MENU INPUT menu EXT. INPUT MENU INPUT menu DISPLAY ❇ ❇ EXT. INPUT (TV/VIDEO) You can select TV or video terminal input with one touch. Press the TV/VIDEO button to select an input. To operate this function with a menu: DISPLAY You can display the programme number, video terminal number and PR list on the screen. Press the DISPLAY button to select the desired mode: Choose a TV channel or a VIDEO terminal. 1 Press the DISPLAY button to display the PR LIST. 2 Select a programme number or video terminal by pressing the 5/∞ button to move up/down on the programme number or press the 2/3 button to skip for each 7 programme numbers, then press MENU/OK button. To operate this function with a menu: ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. PR LIST -7 OK +7 PR CH/CC AV 1 I CH 03 2 I CH 05 3 I CH 07 4 I CH 09 5 CC 04 6 CC 05 . . ON OFF PR LIST 6/8/04, 4:02 PM Downloaded from www.Manualslib.com manuals search engine 19 lly list button. eceived ly. roceed to e 8. channel the TV t manually. 2 Choose EDIT/MANUAL, then press the MENU/OK button. EDIT menu appears. 3 Choose the channel which you want to register. 4 Press the blue button to activate the MANUAL function. The sound system of the channel appears at the right of the CH/CC number. 5 Press the 3 button to choose an appropriate sound system. For details, see “SOUND SYSTEM” on page 14. 6 Press the green or red button to search for the TV channel. Searching stops when a channel is found and displayed. 7 Repeat step 5 until your desired TV channel appears If the reception is poor Press the blue or yellow button to fine tune the TV channel. If noisy sound is heard Press the 3 button to choose an appropriate sound system. 8 Press the MENU/OK button to exit the menu. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. EDIT BACK I IINSERT OK MOVE IDELETE IMANUAL PR CH/CC 7 CH 09 8 CH 11 9 I CH 13 3 10 11 12 13 . 6/8/04, 4:02 PM Downloaded from www.Manualslib.com manuals search engine To add in the new channel (INSERT in the EDIT menu) You can add in the new channel in the TV channel list as you like. You need to find the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from the attached sheet “CH/CC number list” on page 21. 1 Display the INSTALL menu. 2 Choose EDIT/MANUAL, then press the MENU/OK button. EDIT menu appears. 3 Choose the PR number for which you will register a new TV channel. When you add a new TV channel of NTSC-M system, press the SOUND SYSTEM button to change the sound system to M. Then proceed to the next step. 4 Press the green button, then press 5/∞ buttons to choose “CC” or “CH”. 5 Press the number button to enter the remaining CH/CC number. The TV starts to search the TV channel, and the picture of the TV channel appears. If the TV finds no TV channel, a noisy picture appears. When a TV channel has already been registered in PR99, using the INSERT function deletes that TV channel. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5. will be utton. umber, or the PR annel. MENU INSTALL menu ❇ 6/8/04, 4:02 PM Downloaded from www.Manualslib.com manuals search engine 21 US CCIR OIRT AUSTRALIA -33, W+48 E33 -34, W+49 E34 -35, W+50 E35 -36, W+51 E36 -37, W+52 E37 -38, W+53 E38 -39, W+54 E39 -40, W+55 E40 -41, W+56 E41 -42, W+57 E42 -43, W+58 E43 -44, W+59 E44 -45, W+60 E45 -46, W+61 E46 -47, W+62 E47 -48, W+63 E48 -49, W+64 E49 -50, W+65 E50 -51, W+66 E51 -52, W+67 E52 -53, W+68 E53 -54, W+69 E54 -55, W+70 E55 -56, W+71 E56 -57, W+72 E57 -58, W+73 E58 -59, W+74 E59 -60, W+75 E60 -61, W+76 E61 -62, W+77 E62 -63, W+78 E63 -64, W+79 E64 -65, W+80 E65 -66, W+81 E66 -67, W+82 E67 -68, W+83 E68 -69, W+84 E69 US CCIR OIRT AUSTRALIA S-1 AU-5 S-2 S-3 S-4 S-5 S-6 AU-5A S-7 S-8 S-9 S-10 S-11 S-12 S-13 A S-14 B S-15 C S-16 D S-17 CC US CCIR OIRT AUSTRALIA CC 18 E S-18 CC 19 F S-19 CC 20 G S-20 CC 21 H S-21 CC 22 I S-22 CC 23 J S-23 CC 24 K S-24 CC 25 L S-25 CC 26 M S-26 CC 27 N S-27 CC 28 O S-28 CC 29 P S-29 CC 30 Q S-30 CC 31 R S-31 CC 32 S S-32 CC 33 T S-33 CC 34 U S-34 CC 35 V S-35 CC 36 W S-36 CC 37 W+1 S-37 CC 38 W+2 S-38 CC 39 W+3 S-39 CC 40 W+4 S-40 CC 41 W+5 S-41 CC 42 W+6 CC 43 W+7 CC 44 W+8 CC 45 W+9 CC 46 W+10 CC 47 W+11 CC 48 W+12 CC 49 W+13 CC 50 W+14 CC 51 W+15 CC 52 W+16 CC 53 W+17 CC 54 W+18 CC 55 W+19 CC 56 W+20 CC 57 W+21 CC 58 W+22 CC 59 W+23 CC 60 W+24 CC 61 W+25 CC 62 W+26 CC 63 W+27 CC 64 W+28 CC 75 X CC 76 Y R3 CC 77 Z R4 AU-3 CC 78 Z+1 R5 CC 79 Z+2 AU-4 CC 95 A-5 CC 96 A-4 CC 97 A-3 CC 98 A-2 CC 99 A-1 5/25/04, 1:34 PM Downloaded from www.Manualslib.com manuals search engine E and e. Your roper l Connecting to rear component/video input terminal and output terminal V game When you use VIDEO-1 INPUT, you should choose to connect S-VIDEO or video input. If S-VIDEO connector and video input are connected at the same time, no picture display on the screen and the message “PLEASE DISCONNECT VIDEO-1 CABLE!” appears. In this case, you should disconnect either S-VIDEO or video input. When connecting to COMPONENT (VIDEO-2) input, depending on the connection, choose the appropriate video input using the menu (see page 18). V L R V L R /MONO OUTPUT VIDEO-1 INPUT V L R R L/MONO Y CB CR /V V S OVER L R /MONO OUTPUT VIDEO-1 INPUT COMPONENT (VIDEO-2) INPUT Rear of TV Rear of TV AV-2934WE AV-2134YE VCR (for playing) DVD player (composite signals) VCR (for recording) DVD player (component video signals) VCR (for playing) VCR (for recording) 5/25/04, 1:34 PM Downloaded from www.Manualslib.com manuals search engine 23 e below it is turned . Refer to ion with the vices such a hair drier. . eflecting st the nality . Refer to . Refer to 10. re of the signal roperly. efer to the stereo/ ge 15). • The batteries may be exhausted. Replace with new batteries (see page 7). • Ensure that you are operating the remote less than seven meters from the front of your TV. • Press TV/VIDEO button to return to TV mode and try operating the menus. • Deactivate the CHILD LOCK function if it is turned on (see page 17). • This may due to the AUTO SHUT OFF function is activated. Press the POWER button to turn on the TV. • This may due to the magnetized device such as a speaker near to your TV. Keep the device apart from your TV. Alternately, you can also use the magnetic-shielded speaker. • This may due to the earth magnetism. Refer to “PICTURE TILT” on page 11 to correct the tilt. • Image required time to stabilize before display. This is not a malfunction. • This is due to a sudden change in temperature and it is not a malfunction. If the crackling sound is too frequent, request your service technician for inspection. • This is due to the static electricity of the picture tube and it will not harm the human body. This is not a malfunction. • Cannot operate the remote control • Cannot operate the menus • Cannot operate the front control buttons • TV is turned off suddenly • Colour patches appear at the corner of the screen • Picture is tilted • Image takes a short period to be displayed • TV may emitted crackling sound • Feel a slight electric shock when touching the TV screen 5/25/04, 1:34 PM Downloaded from www.Manualslib.com manuals search engine VICTOR COMPANY OF JAPAN, LIMITED 0504-FLE-JMT HF channel (U) d and hyper band. input, AUDIO L/R input L/R input, COMPONENT VIDEO (Y/CB/CR) input (Except for AV-2134YE/ L/R input (Except for AV-2134YE/AV-2154CE.) L/R output mm diameter) LE/AV-2554LE/AV-25LS24/AV-2134YE/AV-2144LE/AV-2154CE/AV-2154LE. NGUAGE” on page 13. Sound-multiplex systems may not be available. Please confirm with the chart t notice. 5/25/04, 1:34 PM Downloaded from www.Manualslib.com manuals search engine