GGT0031-001A-H COLOUR TELEVISION AV-21D114 AV-14F114 Contents Knowing your TV’s features ........................... 2 Remote control buttons and basic functions . 3 TV buttons and functions .............................. 5 Setting up your TV ........................................ 6 Basic setting for picture ................................. 8 Advanced setting for picture .......................... 9 Advanced setting for sound ........................... 9 Favorite channel and video setting.............. 10 Customized setting...................................... 11 TV channel presetting ................................. 12 Additional preparation ................................. 14 Troubleshooting ........................................... 14 Specifications .............................................. 15 INSTRUCTIONS Downloaded from www.Manualslib.com manuals search engine 2 Safety Instructions WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV. 1 Operate only from the power source indicated on the rear of the TV. 2 Avoid damaging the power cord and mains plug. When unplugging the TV, grasp the mains plug. Do not pull on the power cord. 3 Never block or cover the cabinet ventilation openings. Never install the TV where good ventilation is unattainable. When installing this TV, leave spaces for ventilation around the TV more than the minimum distances as shown in the diagram. 4 Do not allow objects or liquid into the cabinet openings. 5 In the event of a fault, unplug the unit and call a JVC service technician. Do not attempt to repair it yourself or remove the rear cover. 6 The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it. 7 If you are not going to use this TV for a long period of time, be sure to disconnect the AC plug from the AC socket. 8 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. 15 cm 10 cm 15 cm 10 cm Knowing your TV’s functions Main features Function Description Bilingual (I•II) You can listen to the bilingual sound from TV programme broadcasting. Favorite CH (Channel) You can register up to four favorite channels for quick re-call with one-press. AI Volume TV adjusts automatically the volume to the same level for all TV channels to avoid sudden change of the volume when selecting different TV channel. VNR You can reduce the picture noise when you viewing noisy TV programmes or video sources. White balance You can choose one of three tones of white to match to the video source such as movie, sports, etc. Changing White balance affects the appearance of all other colours on the screen. Child lock To prevent accidental operation by your children, you can disable the control buttons on the TV. Thank you for buying this JVC colour television. To make sure you understand how to use your new TV, please read this manual throughly before you begin. Downloaded from www.Manualslib.com manuals search engine 3 1 9 2 3 7 5 0 4 6 8 Remote control buttons and basic functions RM-C1261 No.Press To 1 POWER Turn on or off the TV from standby mode. 2 MENU/OK Display menu and confirm selected function. 3 5/∞/2/3 Select and adjust menu function. 4 CHANNEL M Select the desired channel number. 5 VOLUME M Adjust the volume level. 6 TV/VIDEO Select TV or VIDEO terminal input. 7 MUTING Turn off the volume. Press this button again to resume the volume. 8 DISPLAY Display the programme number or video terminal number, bilingual mode (I•II) /BACK broadcast system and PR list (channel list) on the screen. You can select the channel using the PR list. 1 Press the DISPLAY button once to display the PR list. 2 Press 5/∞/2/3 button to choose a channel, then press the MENU/OK button. You can confirm the favorite channels in the PR list. The channels set to favorite channels are indicated with coloured mark. On the other hand, you can use this button to return to the previous menu. 9 0~9, -/-- Select the programme number. For two digits programme number, press -/--, then press the number button. 0 RETURN, a) Return to the frequently view channel with one touch. 1 Choose the channel you want to register. 2 Press and hold RETURN, button until “RETURN PLUS PROGRAMMED!” appears. To cancel, press and hold RETURN, button until “RETURN PLUS CANCELED!” appears. b) Return to the previously viewed channel, if you have not set or have cancelled the Return channel as above. Downloaded from www.Manualslib.com manuals search engine 4 Remote control buttons and basic functions How to operate menus and menu locations TO Operation Note Display the MENU. Press the MENU/OK button 2. To exit the MENU, press the DISPLAY/BACK button* 8 or choose EXIT menu. Display the top menu. Press 5/∞ buttons 3 to choose a menu title. Press ∞ button 3 to display the Then press MENU/OK button 2. next page for more functions. Display the 2nd menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Display the 3rd menu. Press 5/∞ buttons 3 to choose a menu title. Then press MENU/OK button 2. Return to the previous Press the DISPLAY/BACK button* 8. – menu. Choose the setting of Press 5/∞ buttons 3 to choose a function. Press the MENU/OK button 2 to a function. Then press the 2/3 buttons 3 to change the exit from the menu. setting. Adjust the effect level Press 5/∞ buttons 3 to choose a function. of a function. Then press the 2/3 buttons 3 to adjust the effect level. Display the sub menu Press 5/∞ buttons 3 to choose a function. of a function. Then press MENU/OK button 2 to display – the sub menu. The following chart shows locations of functions in menus. In this manual, location of a function is described as follows: MENU Top menu 2nd menu MENU Top menu 2nd menu 3rd menu Note: Some functions have the 4th menus as the sub-menus. * To exit the menu, the on screen display will show BACK indicated in blue. But it doesn’t refer to the blue button on the remote control. Instead, it refers to the DISPLAY/BACK button on the remote control. Top menu 2nd menu Location 3rd menu Location MENU INPUT EXT. INPUT P.11 - - DISPLAY P.11 - - PICTURE PICTURE MODE P.8 - - PICTURE SETTING P.8 - - WHITE BALANCE P.8 - - PICTURE FEATURES - VNR P.11 FAVORITE CH SETTING P.10 VIDEO SETTING P.10 COLOUR SYSTEM P.8 PICTURE BOOSTER P.8 SOUND I•II P.9 - - AI VOLUME P.9 - - FEATURES OFF TIMER P.11 - - CHILD LOCK P.11 - - INSTALL AUTO PROGRAM P.12 - - EDIT/MANUAL P.12 DELETE, MOVE, MANUAL, INSERT P.12 LANGUAGE P.11 LANGUAGE P.11 BLUE BACK P.9 - - AUTO SHUTOFF P.11 - - EXIT - - - - * If you want to adjust PICTURE SETTING menu, you must set PICTURE MODE menu to USER. Downloaded from www.Manualslib.com manuals search engine 5 TV buttons and functions The following illustrations are for AV-14F114 and AV-21D114 Front of the TV AV-14F114 AV-21D114 Rear of the TV AV-14F114 AV-21D114 No. Button/terminal Description 1 I (main power) Press to turn on or turn off the TV’s main power. 2 Power lamp Indicate the TV is being turned on or off. No colour : TV’s main power is being turned off. Red : TV’s main power is being turned on. 3 TIMER lamp Lights when the TV is in OFF TIMER mode. 4 Remote control sensor 5 VOLUME M Press to adjust the volume level. 6 CHANNELM Press to select the desired channel. 7 MENU Press to display the menu. 8 IN (VIDEO-2) Video and audio input jacks for VIDEO-2 mode. 9 Headphone jack. 0 Aerial socket. - OUTPUT Video and audio output jacks. = VIDEO-1 INPUT Video and audio input jacks for VIDEO-1 mode. How to operate the menus with the TV button Work as same as the button on the TV button remote control unit Note MENU MENU/OK button To display main menu and exit menu after finish setting. CHANNEL M ∞/5 button To select menu function. VOLUME M 2/3 button To adjust the desired function. ������� ����� ����� ����� ������ 0 - = ���� �� ����� ����� �� ��������� 9 7 4 3 2 1 8 6 5 MENU OK VIDEO AUDIO IN (VIDEO-2) 9 7 4 3 2 1 8 6 5 VIDEO AUDIO 0 - = VIDEO-1 INPUT OUTPUT Downloaded from www.Manualslib.com manuals search engine 6 Setting up your TV CAUTION • Turn off the equipment including the TV before connecting. 1 Connecting the aerial To install rod aerial Install into the top-rear aerial holder. Once installed, it cannot be removed. ����� ����� ������� ����� ������ ����� ����� ������� ����� ������ Downloaded from www.Manualslib.com manuals search engine 7 Setting up your TV (continued) 5 Making the initial settings Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps as below: ����� ���� �������� �� ������� 7 �� ���� ������� • Press the red button to cancel the SETUP TOUR RESTART function. If you want to make initial settings again when the next time you turn on the TV, press the MENU/OK button to activate the SETUP TOUR RESTART function. ≠ EDIT PR CH/CC 7 CH 09 8 CH 11 9 CH 13 10 11 12 13 3 ■ • Proceed to edit the channel list (PR list). For details, see page 12. �������� ������� ������� • Press 5/∞ button to select your desired language. ≠ �� �� �� ���� ������� ��� • TV will start searching for the channels. To stop AUTO PROGRAM, press MENU/OK button. • If the JVC logo does not appear, use LANGUAGE and AUTO PROGRAM functions to make the initial settings. Those functions are located in the INSTALL menu. • If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings. Downloaded from www.Manualslib.com manuals search engine 8 Basic setting for picture COLOUR SYSTEM You can select the appropriate colour system when the picture is not clear or no colour appears. Press the COLOUR SYSTEM button to select a setting. In TV mode: AUTO PAL SECAM In VIDEO mode: AUTO PAL SECAM NTSC3.58 NTSC4.43 To operate this function with a menu: ❇ MENU PICTURE PICTURE FEATURES COLOUR SYSTEM For the colour system in each country or region, see the table below: Area Country or Region System Bahrain, Kuwait, Oman, Qatar, United Arab Emirates, Yemen, etc. PAL Indonesia, Malaysia, Singapore, Asia, Middle Thailand, India, etc. East China, Vietnam, etc. PAL Hong Kong, etc. PAL Islamic Republic of Iran, Lebanon, SECAM Saudi Arabia, etc. Philippines, Taiwan, Myanmar, etc. NTSC Russia, etc. SECAM Europe Czech Republic, Poland, etc. PAL Germany, Holland, Belgium, etc. PAL UK, etc. PAL Oceania Australia, New Zealand, etc. PAL Republic of South Africa, etc. PAL Africa Nigeria, etc. PAL Egypt, Morocco, etc. SECAM PICTURE MODE You can choose the desired picture setting with one-touch. Press the PICTURE MODE button to select a setting. SOFT Softens contrast and sharpness. BRIGHT Heightens contrast and sharpness. STANDARD Standard picture setting. USER You can change this picture setting as you like. Select USER and adjust following items in the PICTURE SETTING menu. (CONTRAST, BRIGHT, SHARP, COLOUR, TINT*) *TINT can only be adjusted in NTSC system. To operate this function with a menu: ❇ MENU PICTURE PICTURE MODE To return the USER setting to the default, press the blue button when the PICTURE SETTING menu appears. Adjusting the picture - USER You can adjust the desired picture setting when selecting USER in PICTURE MODE. 1 Select the USER in PICTURE MODE under PICTURE menu. ❇ USER MENU PICTURE PICTURE MODE 2 Select the PICTURE SETTING in PICTURE menu, then adjust the setting. ❇ MENU PICTURE PICTURE SETTING CONTRAST 2 : Lower contrast 3 : Higher contrast BRIGHT 2 : Darker 3 : Brighter SHARP 2 : Softer 3 : Higher COLOUR 2 : Lighter 3 : Deeper TINT* 2 : Reddish 3 : Greenish *TINT can only be adjusted in NTSC system. PICTURE BOOSTER (Except AV-14F114) You can improve picture clarity when the picture is unclear due to the low signal reception. Press the PICTURE BOOSTER button to select the desired mode. ❇ MENU PICTURE PICTURE FEATURES PICTURE BOOSTER HIGH Perform at maximum level. LOW Perform at minimum level. OFF Cancel the function. WHITE BALANCE You can change the white balance of the picture to better match the type of video being viewed. Select the WHITE BALANCE in the PICTURE menu, then choose the desired setting. ❇ MENU PICTURE WHITE BALANCE NORMAL Normal white balance. COOL Bluish white. WARM Reddish white. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4. Downloaded from www.Manualslib.com manuals search engine 9 Advance setting for picture Advanced setting for sound BILINGUAL (I•II) You can enjoy the bilingual broadcasted programme. Press the I/II button to select the desired mode. I Select bilingual I (sub I). II Select bilingual II (sub II). ❇ MENU SOUND I•II AI VOLUME You can adjust the volume of all the channels and video inputs to the same level automatically. Select the AI VOLUME in SOUND menu, then choose ON or OFF. ❇ MENU SOUND AI VOLUME ❇ MENU INSTALL BLUE BACK If you wish to continue viewing the poor picture, cancel the BLUE BACK function. BLUE BACK You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna. Select the BLUE BACK in the INSTALL menu, then choose ON or OFF. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4. Downloaded from www.Manualslib.com manuals search engine 10 Favorite channel and video setting To register the favorite channel You can register and recall 4 favorite channels by using the colour buttons (red, green, yellow, blue). 1 In TV mode, select a TV channel (PR 01-99) you desired to register. 2 Press and hold a colour button for 3 seconds or more. “FAVORITE CHANNEL 7 PROGRAMMED!” appears on the screen and current channel is registered. 3 To register other favorite channels, repeat Step 1 to 2. To recall the favorite channel, press the colour button. When the TV is in menu mode, favorite channel function is not available. To adjust favorite channel setting (FAVORITE CH SETTING) You can adjust the picture settings for the favorite channels. 1 Display the PICTURE menu and select FAVORITE CH SETTING in PICTURE FEATURES menu. ❇ FAVORITE CH SETTING MENU PICTURE PICTURE FEATURES 2 Select FAVORITE CHANNEL in FAVORITE CH SETTING menu, then choose the desired favorite channel. ❇ FAVORITE CHANNEL FAVORITE CH SETTING �������� �� ������� �������� ������� �� �� �������� ������ ����� ������ ���� ������ �� 3 Select EFFECT, then press 2/3 button to choose ON. To cancel the settings, choose OFF. 4 Select the desired item that you wish to adjust. �������� ������ ����� ���� ������ 5 Press the MENU/OK button to exit the menu. To adjust the video setting (VIDEO SETTING) You can adjust the picture settings for video inputs. 1 Display the PICTURE menu and select VIDEO SETTING in PICTURE FEATURES menu. ❇ VIDEO SETTING MENU PICTURE PICTURE FEATURES 2 Select VIDEO STATUS in VIDEO SETTING menu, then choose the desired video input. ❇ VIDEO SETTING VIDEO STATUS VIDEO SETTING VIDEO STATUS VIDEO-1 CONTRAST BRIGHT SHARP COLOUR TINT EFFECT ON 3 Select EFFECT, then press 2/3 button to choose ON. To cancel the settings, choose OFF. 4 Select the desired item that you wish to adjust. �������� ������ ����� ���� ������ 5 Press the MENU/OK button to exit the menu. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4. Downloaded from www.Manualslib.com manuals search engine 11 Customized setting VNR You can reduce the noise. Select the VNR in the PICTURE FEATURES menu under PICTURE menu, then choose a setting of VNR function. ❇ VNR MENU PICTURE PICTURE FEATURES OFF VNR is turned off. AUTO Effect of VNR is automatically controlled. MIN Effect of VNR becomes minimum level. MAX Effect of VNR becomes maximum level. If you select MAX, the picture becomes softer even if the original picture is sharp. LANGUAGE You can choose your desired on screen display language. Select the LANGUAGE in the INSTALL menu, then choose a language. ❇ MENU INSTALL LANGUAGE CHILD LOCK You can disable the front control buttons of the TV. Select the CHILD LOCK in the FEATURES menu, then choose ON or OFF. ❇ MENU FEATURES CHILD LOCK OFF TIMER You can set the TV to turn off automatically to standby mode after a set time. Press the OFF TIMER button to select a desired period of time. OFF TIMER 0 120 10 You can set the period of time to a maximum of 120 minutes in 10 minutes step. To operate this function with a menu: ❇ MENU FEATURES OFF TIMER When the elapsed of time left one minute, “GOOD NIGHT!” appears on the screen. You can display the OFF TIMER menu again to confirm or change the remaining time. AUTO SHUTOFF You can set the TV to turn off automatically when no signal is received for about 15 minutes or longer after the end of a broadcast. Select AUTO SHUTOFF in INSTALL menu, then choose ON or OFF. ❇ MENU INSTALL AUTO SHUTOFF The AUTO SHUTOFF function does not turn off the TV’s main power. The AUTO SHUTOFF function is not available in video mode. EXT. INPUT (TV/ VIDEO) You can select TV or video terminal input with one touch. Press the TV/VIDEO button to select an input. To operate this function with a menu: ❇ MENU INPUT EXT.INPUT DISPLAY You can display the programme number, video terminal number and PR list on the screen. Press the DISPLAY button to display the informa- tion on screen. To operate this function with a menu: ❇ MENU INPUT DISPLAY ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4. Downloaded from www.Manualslib.com manuals search engine 12 TV channel presetting To register the TV channels auto- matically You can register the TV channels into the TV’s channel list automatically. 1 Display the INSTALL menu. ❇ MENU INSTALL 2 Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR list) automatically. 3 “SETUP TOUR RESTART?” appears. To start the Press the MENU/OK button. SETUP TOUR Then proceed to step 5 of “Setting up your TV” on page 7. To skip the Press the Red button. SETUP TOUR 4 The EDIT menu appears. To edit the Proceed to the Step 3 of “To channel list edit the channel list (PR list)” on this page. If a channel is Proceed to the Step 3 of “To not registered register the channel manually” on this page. To exit the menu Press the MENU/OK button. For details of “SETUP TOUR”, see page 7. To register the TV channels manually (MANUAL in the EDIT menu) You can register the TV channels into the TV’s channel list manually. 1 Display the INSTALL menu. ❇ MENU INSTALL 2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears. EDIT PR CH/CC 7 CH 09 8 CH 11 9 CH 13 10 11 12 13 3 ■ 3 Choose the channel which you want to register. 4 Press the blue button to activate the MANUAL function. The sound system of the channel appears at the right of the CH/CC number. 5 Press the green or red button to search for the TV channel. Searching stops when a channel is found and displayed. 6 Repeat step 5 until your desired TV channel appears. If the reception Press the blue or yellow button is poor to fine tune the TV channel. 7 Press the MENU/OK button to exit the menu. To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu) You can edit the TV channel list as you like. Note: After this operation, other channel’s PR numbers will be changed. 1 Display the INSTALL menu. ❇ MENU INSTALL 2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears. EDIT PR CH/CC 7 CH 09 8 CH 11 9 CH 13 10 11 12 13 3 ■ 3 Choose the channel which you want to change PR number, or delete. 4 Do the following action: To change the Press the 3 button. Then move PR number it to the PR number you want (MOVE) to use it for the channel. Finally press the 2 button. To delete the Press the yellow button. channel (DELETE) 5 Press the MENU/OK button to exit the menu. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4. Downloaded from www.Manualslib.com manuals search engine 13 TV channel presetting To add in the new channel (INSERT in the EDIT menu) You can add in the new channel in the TV channel list as you like. You need to find the “CH/CC” number for the TV channel. Find the “CH/CC” number correspond- ing to the channel number of the TV channel from the attached sheet “CH/CC number list” on this page. 1 Display the INSTALL menu. ❇ MENU INSTALL 2 Choose EDIT/ MANUAL, then press the MENU/OK button. EDIT menu appears. 3 Choose the PR number for which you will register a new TV channel. 4 Press the green button, then press 5/∞ buttons to choose “CC” or “CH”. 5 Press the number button to enter the remaining CH/CC number. The TV starts to search the TV channel, and the picture of the TV channel appears. If the TV finds no TV channel, a noisy picture appears. When a TV channel has already been registered in PR99, using the INSERT function deletes that TV channel. ❇ About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 4. CH/CC number When you want to use the INSERT function by the previous operation, find the CH/CC number corresponding to the channel number of the TV channel from this table. Channel No. Country US United States, Philippines, etc.. CCIR Middle East, Southeast Asia, etc.. OIRT Eastern Europe, Russia, Vietnam, etc.. AUSTRALIA Australia, etc.. CH US CCIR OIRT AUSTRALIA CH 02 US- 2 E2 R1 AU- 0 CH 03 US- 3 E3 AU- 1 CH 04 US- 4 E4 R2 AU- 2 CH 05 US- 5 E5 R6 AU- 6 CH 06 US- 6 E6 R7 AU- 7 CH 07 US- 7 E7 R8 AU- 8 CH 08 US- 8 E8 R9 AU- 9 CH 09 US- 9 E9 CH 10 US- 10 E10 R10 AU- 10 CH 11 US- 11 E11 R11 AU- 11 CH 12 US- 12 E12 R12 CH 13 US- 13 CH 14 US- 14, W+ 29 CH 15 US- 15, W+ 30 CH 16 US- 16, W+ 31 CH 17 US- 17, W+ 32 CH 18 US- 18, W+ 33 CH 19 US- 19, W+ 34 CH 20 US- 20, W+ 35 CH 21 US- 21, W+ 36 E21 CH 22 US- 22, W+ 37 E22 CH 23 US- 23, W+ 38 E23 CH 24 US- 24, W+ 39 E24 CH 25 US- 25, W+ 40 E25 CH 26 US- 26, W+ 41 E26 CH 27 US- 27, W+ 42 E27 CH 28 US- 28, W+ 43 E28 CH 29 US- 29, W+ 44 E29 CH 30 US- 30, W+ 45 E30 CH 31 US- 31, W+ 46 E31 CH 32 US- 32, W+ 47 E32 CH 33 US- 33, W+ 48 E33 CH 34 US- 34, W+ 49 E34 CH 35 US- 35, W+ 50 E35 CH US CCIR OIRT AUSTRALIA CH 36 US- 36, W+ 51 E36 CH 37 US- 37, W+ 52 E37 CH 38 US- 38, W+ 53 E38 CH 39 US- 39, W+ 54 E39 CH 40 US- 40, W+ 55 E40 CH 41 US- 41, W+ 56 E41 CH 42 US- 42, W+ 57 E42 CH 43 US- 43, W+ 58 E43 CH 44 US- 44, W+ 59 E44 CH 45 US- 45, W+ 60 E45 CH 46 US- 46, W+ 61 E46 CH 47 US- 47, W+ 62 E47 CH 48 US- 48, W+ 63 E48 CH 49 US- 49, W+ 64 E49 CH 50 US- 50, W+ 65 E50 CH 51 US- 51, W+ 66 E51 CH 52 US- 52, W+ 67 E52 CH 53 US- 53, W+ 68 E53 CH 54 US- 54, W+ 69 E54 CH 55 US- 55, W+ 70 E55 CH 56 US- 56, W+ 71 E56 CH 57 US- 57, W+ 72 E57 CH 58 US- 58, W+ 73 E58 CH 59 US- 59, W+ 74 E59 CH 60 US- 60, W+ 75 E60 CH 61 US- 61, W+ 76 E61 CH 62 US- 62, W+ 77 E62 CH 63 US- 63, W+ 78 E63 CH 64 US- 64, W+ 79 E64 CH 65 US- 65, W+ 80 E65 CH 66 US- 66, W+ 81 E66 CH 67 US- 67, W+ 82 E67 CH 68 US- 68, W+ 83 E68 CH 69 US- 69, W+ 84 E69 CC US CCIR OIRT AUSTRALIA CC 01 S- 1 AU- 5 CC 02 S- 2 CC 03 S- 3 CC 04 S- 4 CC 05 S- 5 CC 06 S- 6 AU- 5A CC 07 S- 7 CC 08 S- 8 CC 09 S- 9 CC 10 S- 10 CC 11 S- 11 CC 12 S- 12 CC 13 S- 13 CC 14 A S- 14 CC 15 B S- 15 CC 16 C S- 16 CC 17 D S- 17 CC 18 E S- 18 CC 19 F S- 19 CC 20 G S- 20 CC 21 H S- 21 CC 22 I S- 22 CC 23 J S- 23 CC 24 K S- 24 CC 25 L S- 25 CC 26 M S- 26 CC 27 N S- 27 CC 28 O S- 28 CC 29 P S- 29 CC 30 Q S- 30 CC 31 R S- 31 CC 32 S S- 32 CC 33 T S- 33 CC 34 U S- 34 CC 35 V S- 35 CC 36 W S- 36 CC 37 W+ 1 S- 37 CC US CCIR OIRT AUSTRALIA CC 38 W+ 2 S- 38 CC 39 W+ 3 S- 39 CC 40 W+ 4 S- 40 CC 41 W+ 5 S- 41 CC42 W+ 6 CC 43 W+ 7 CC 44 W+ 8 CC 45 W+ 9 CC 46 W+ 10 CC 47 W+ 11 CC 48 W+ 12 CC 49 W+ 13 CC 50 W+ 14 CC 51 W+ 15 CC 52 W+ 16 CC 53 W+ 17 CC 54 W+ 18 CC 55 W+ 19 CC 56 W+ 20 CC 57 W+ 21 CC 58 W+ 22 CC 59 W+ 23 CC 60 W+ 24 CC 61 W+ 25 CC 62 W+ 26 CC 63 W+ 27 CC 64 W+ 28 CC 75 X CC 76 Y R3 CC 77 Z R4 AU- 3 C 78 Z+ 1 R5 CC 79 Z+ 2 AU- 4 CC 95 A- 5 CC 96 A- 4 CC 97 A- 3 CC 98 A- 2 CC 99 A- 1 Channel Downloaded from www.Manualslib.com manuals search engine 14 Additional preparation The illustrations shown in this section are for AV-14F114 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated. Before connecting • Read the manuals provided with the devices for the proper connection. • Turn off all the devices including the TV. • Note that connecting cables are not supplied. MENU OK VIDEO AUDIO IN (VIDEO-2) ����� ����� ������� ����� ������ Front of the TV Rear of the TV VCR (for playing) DVD player (Composite signals) Headphones VCR (for recording) Camcorder or TV game Troubleshooting If a problem occurs when you are using the TV, check the following troubleshooting guide before calling for repair. No picture, no sound Snowy picture Stripes appear on the picture Double-pictures (ghosting) occur Poor picture White and bright still image look as if it were coloured Top of the image from software products or video tape is distorted • Deactivate the BLUE BACK function if it is turned on. • Check the aerial cable and its connection with the TV. • Interference occurs caused by other devices such as an amplifier, personal computer, or a hair drier. Move such devices away from your TV. • Interference occurs caused by signal reflecting from mountains or building. Try to adjust the aerial’s direction or use a better directional- ity antenna. • Choose the appropriate colour system. Refer to “COLOUR SYSTEM” on page 8. • Adjust the COLOUR or BRIGHT setting. Refer to “Adjusting the picture - USER” on page 8. • Inevitable phenomenon due to the nature of the picture tube. This is not a malfunction. • This is due to the condition of the video signal whereby the image was not recorded properly. This is not a malfunction. Cannot operate the remote control Cannot operate the menus Cannot operate the front control buttons TV is turned off suddenly Colour patches appear at the corner of the screen Image takes a short period to be displayed TV may emitted crackling sound Feel a slight electric shock when touching the TV screen • The batteries may be exhausted. Replace with new batteries (see page 6). • Ensure that you are operating the remote less than seven meters from the front of your TV. • Press TV/VIDEO button to return to TV mode and try operating the menus. • Deactivate the CHILD LOCK function if it is turned on (see page 11). • This may due to the AUTO SHUT OFF function is activated. Press the POWER button to turn on the TV. • This may due to the magnetized device such as a speaker near to your TV. Keep the device apart from your TV. Alternately, you can also use the magnetic- shielded speaker. • Image required time to stabilize before display. This is not a malfunction. • This is due to a sudden change in temperature and it is not a malfunction. If the crackling sound is too frequent, request your service technician for inspection. • This is due to the static electricity of the picture tube and it will not harm the human body. This is not a malfunction. Downloaded from www.Manualslib.com manuals search engine 15 Specifications MODEL AV-21D114 AV-14F114 TV RF systems B/G Colour systems RF MODE PAL, SECAM VIDEO MODE PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz Channel and frequencies VHF low channel (VL) = 46.25 to 168.25 MHz VHF high channel (VH) = 175.25 to 463.25 MHz UHF channel (U) = 471.25 to 863.25 MHz • Receives cable channels in mid band (X to Z, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41) Power input AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz) Power consumption MAX 81 W MAX 65 W AVG 57 W AVG 48 W Screen size (measured diagonally) Picture tube 546.9 mm Picture tube 368.4 mm Visible area 508.0 mm Visible area 335.4 mm Audio output (Rated power output) 3W 3W Speakers (5 x 12) cm x 2 (5 x 9) cm x 2 External input / output VIDEO-1 : VIDEO input, AUDIO input VIDEO-2 : VIDEO input, AUDIO input OUTPUT : VIDEO output, AUDIO output Headphone jack : stereo mini jack (3.5 mm diameter, sound is monaural) Dimension (W x H x D) (mm) 598 x 468 x 478 mm 462 x 340.5 x 375 mm Weight 21 kg 10 kg Accessories • Remote control unit : RM-C1261 x 1 • Remote control unit : RM-C1261 x 1 • AA/R6/UW-3 dry cell battery x 2 • AA/R6/UW-3 dry cell battery x 2 • Matching aerial adapter x 1 • Matching aerial adapter x 1 • Rod aerial x 1 Downloaded from www.Manualslib.com manuals search engine 1004-NIC-JMT © 2004 Victor Company of Japan, Limited Downloaded from www.Manualslib.com manuals search engine