ORDER NO. PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS SERVICE, INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 � � � � � � � � � �PIONEER CORPORATION 2000 c PDR-609 RRV2368 1. SAFETY INFORMATION ....................................... 2 2. EXPLODED VIEWS AND PARTS LIST ................. 4 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .. 12 4. PCB CONNECTION DIAGRAM ........................... 36 5. PCB PARTS LIST ................................................ 46 6. ADJUSTMENT..................................................... 51 7. GENERAL INFORMATION .................................. 64 7.1 DIAGNOSIS ................................................... 64 CONTENTS 7.1.1 ERROR CODE ......................................... 64 7.1.2 TROUBLE SHOOTING ............................ 66 7.1.3 ERROR MEESAGE “CHECK TEMP” ....... 68 7.1.4 CD-R DISC MANUFACTURER CODE ..... 68 7.1.5 DISASSEMBLY ........................................ 70 7.1.6 DIAGNOSIS OF CD-R CORE ASSY ........ 71 7.2 PARTS ........................................................... 72 7.2.1 IC ............................................................. 72 7.2.2 DISPLAY .................................................. 84 8. PANEL FACILITIES AND SPECIFICATIONS....... 86 T – ZZY AUG. 2000 Printed in Japan COMPACT DISC RECORDER THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S). Model PDR-609 Type Power Requirement Remarks KU/CA O AC120V WV O AC220- 240V WY O AC220- 240V ◊ÛB->?/ COMPACT DISC DIGITAL RECORDER MONITOR DIGITAL REC LEVEL ANALOG REC LEVEL INPUT SELECTOR AUTO MANUAL AUTO MANUAL MENU/ DELETE TRACK NO. WRITE TIME FINALIZE ERASE SCROLL TEXT SYNCHRO PUSH ENTER R L ANALOG REC BALANCE Legato Link Conversion CD TEXT FOR U.S. MODELS NECESSARY INFORMATION FOR DHHS RULES MARKED ON THE REAR BASE AND ON THE TOP OF CD MECHANISM AS BELOW. DANGER – LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 2 PDR-609 1. SAFETY INFORMATION This service manual is intended for qualified service technicians ; it is not meant for the casual do-it- yourselfer. Qualified technicians have the necessary test equipment and tools, and have been trained to properly and safely repair complex products such as those covered by this manual. Improperly performed repairs can adversely affect the safety and reliability of the product and may void the warranty. If you are not qualified to perform the repair of this product properly and safely, you should not risk trying to do so and refer the repair to a qualified service technician. WARNING This product contains lead in solder and certain electrical parts contain chemicals which are known to the state of California to cause cancer, birth defects or other reproductive harm. Health & Safety Code Section 25249.6 – Proposition 65 NOTICE (FOR CANADIAN MODEL ONLY) Fuse symbols (fast operating fuse) and/or (slow operating fuse) on PCB indicate that replacement parts must be of identical designation. REMARQUE (POUR MODÈLE CANADIEN SEULEMENT) Les symboles de fusible (fusible de type rapide) et/ou (fusible de type lent) sur CCI indiquent que les pièces de remplacement doivent avoir la même désignation. ANY MEASUREMENTS NOT WITHIN THE LIMITS OUTLINED ABOVE ARE INDICATIVE OF A POTENTIAL SHOCK HAZARD AND MUST BE CORRECTED BEFORE RETURNING THE APPLIANCE TO THE CUSTOMER. 2. PRODUCT SAFETY NOTICE Many electrical and mechanical parts in the appliance have special safety related characteristics. These are often not evident from visual inspection nor the protection afforded by them necessarily can be obtained by using replacement components rated for voltage, wattage, etc. Replacement parts which have these special safety characteristics are identified in this Service Manual. Electrical components having such features are identified by marking with a on the schematics and on the parts list in this Service Manual. The use of a substitute replacement component which does not have the same safety characteristics as the PIONEER recommended replacement one, shown in the parts list in this Service Manual, may create shock, fire, or other hazards. Product Safety is continuously under review and new instructions are issued from time to time. For the latest information, always consult the current PIONEER Service Manual. A subscription to, or additional copies of, PIONEER Service Manual may be obtained at a nominal charge from PIONEER. 1. SAFETY PRECAUTIONS The following check should be performed for the continued protection of the customer and service technician. LEAKAGE CURRENT CHECK Measure leakage current to a known earth ground (water pipe, conduit, etc.) by connecting a leakage current tester such as Simpson Model 229-2 or equivalent between the earth ground and all exposed metal parts of the appliance (input/output terminals, screwheads, metal overlays, control shaft, etc.). Plug the AC line cord of the appliance directly into a 120V AC 60Hz outlet and turn the AC power switch on. Any current measured must not exceed 0.5mA. (FOR USA MODEL ONLY) Leakage current tester Reading should not be above 0.5mA Device under test Test all exposed metal surfaces Also test with plug reversed (Using AC adapter plug as required) Earth ground AC Leakage Test www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 3 PDR-609 IMPORTANT THIS PIONEER APPARATUS CONTAINS LASER OF CLASS 3b. SERVICING OPERATION OF THE APPARATUS SHOULD BE DONE BY A SPECIALLY INSTRUTED PERSON. LASER DIODE CHARACTERISTICS MAXIMUM OUTPUT POWER: 23 mW WAVELENGTH: 778 – 787 nm LABEL CHECK KU/CA type Printed on Rear Panel Printed on Rear Panel WY and WV types WY types WY type WV type USYNLIG LASERSTRÅLING VED ÅBNING NÅR SIKKERHED SAF- BRYDERE ER UDE AF FUNKTION. UNDGÅ UDSÆTTELSE FOR STRÅLING UNSICHTBARE LASER-STRAHLUNG TRITT AUS, WENN DECKEL (ODER KLAPPE) GEÖFFNET IST! NICHT DEM STRAHL AUSSETZEN! VRW1094 ADVARSEL VORSICHT! Shield Case 1. Laser Interlock Mechanism The position of the switch (S101) on the LOAB Assy for detecting loading state is detected by the system microprocessor, and the design prevents laser diode oscillation when the switch (S101) is not on TRAY terminal side (TRAY signal is OFF or high level.). Thus, the interlock will no longer function if the switch (S101) is deliberately set to TRAY terminal side (low level). The interlock also does not function in the test mode ∗. Laser diode oscillation will continue, if pin 1 of CN101 on the CD-R CORE ASSY is connected to low level. 2. When the cover is opened with the servo mechanism block removed and turned over, close viewing of the objective lens with the naked eye will cause exposure to a Class 1 laser beam. Additional Laser Caution ∗ Refer to page 51. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 4 PDR-609 2.1 PACKING 2. EXPLODED VIEWS AND PARTS LIST NOTES: • Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. • The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. • Screws adjacent to mark on the product are used for disassembly. ENTER CURSOR MENU/ DELETE NAME MARK SET CLEAR DISPLAY /CHARA 7 1 ¡� 8 3 4 ¢� ABC DEF GHI MNO JKL PQRS TUV WXYZ REC SYNCHRO REPEAT RANDOM NAME CLIP INPUT SELECTER FADER SKIP PLAY SKIP ID PROGRAM CHECK CLEAR AUTO/ MANUAL 1 2 3 4 5 6 7 8 9 10/0 >10 SCROLL TIME Î� •� ENTER CURSOR MENU/ DELETE NAME MARK SET CLEAR DISPLAY /CHARA 7 1 ¡� 8 3 4 ¢� ABC DEF GHI MNO JKL PQRS TUV WXYZ REC SYNCHRO REPEAT RANDOM NAME CLIP INPUT SELECTER FADER SKIP PLAY SKIP ID PROGRAM CHECK CLEAR AUTO/ MANUAL 1 2 3 4 5 6 7 8 9 10/0 >10 SCROLL TIME Î� •� ENTER CURSOR MENU/ DELETE NAME MARK SET CLEAR DISPLAY /CHARA 7 1 ¡� 8 3 4 ¢� ABC DEF GHI MNO JKL PQRS TUV WXYZ REC SYNCHRO REPEAT RANDOM NAME CLIP INPUT SELECTER FADER SKIP PLAY SKIP ID PROGRAM CHECK CLEAR AUTO/ MANUAL 1 2 3 4 5 6 7 8 9 10/0 >10 SCROLL TIME Î� •� 18 18 11 13 13 20 17 21 14 15 (2/2) 16 (2/2) 16 (1/2) 12 3 1 2 6 KU/CA type only WY type only WV, and WY type only WY type only WV type only 9 10 8 7 6 2 15 (1/2) 11 13 12 3 3 1 13 11 12 1 WY type only WV type only 18 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 5 PDR-609 (1) PACKING PARTS LIST Mark No. Description Part No. 1 AC Power Cord See Contrast table (2) NSP 2 Warranty Card See Contrast table (2) 3 Audio Cable (L= 1m) PDE1249 4 • • • • • 5 • • • • • 6 Operating Instructions See Contrast table (2) (English) 7 Operating Instructions See Contrast table (2) (German/Italian) 8 Operating Instructions See Contrast table (2) (Dutch/Swedish) 9 Operating Instructions See Contrast table (2) (Spanish/ Portuguese) 10 Operating Instructions See Contrast table (2) (English/French) 11 Remote Control Unit PWW1169 NSP 12 Dry Cell Battery (R6P, AA) VEM-013 13 Polyethylene Bag Z21-038 (0.03 × 230 × 340) 14 Packing Case See Contrast table (2) 15 Protecter (F) RHA1238 16 Protecter (R) RHA1239 17 Mirror Mat Sheet Z23-007 18 Battery Cover RZN1156 19 • • • • • 20 Accessory Spacer See Contrast table (2) 21 Rear Spacer See Contrast table (2) Mark Part No. Symbol and Description No. KU/CA WV WY type type type 1 AC Power Cord ADG7021 ADG7004 ADG1127 NSP 2 Warranty Card ARY7045 ARY7022 ARY7022 6 Operating Instructions PRB1306 PRB1306 Not used (English) 7 Operating Instructions Not used Not used PRD1060 (German/Italian) 8 Operating Instructions Not used Not used PRD1064 (Dutch/Swedish) 9 Operating Instructions Not used Not used PRD1065 (Spanish/ Portuguese) 10 Operating Instructions Not used Not used PRE1290 (English/ Frenche) 14 Packing Case PHG2418 PHG2429 PHG2419 20 Accessory Spacer Not used Not used PHC1093 21 Rear Spacer Not used RHC1072 Not used (2) CONTRAST TABLE PDR-609/KU/CA, WV and WY types are constructed the same except for the following: Remarks www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 6 PDR-609 2.2 EXTERIOR SECTION A B C B C A D E E F G H H I J J I D F G 11 25 19 8 23 23 22 21 21 8 8 8 3 1 21 21 7 4 2 28 6 27 26 10 24 29 15 8 15 21 5 21 21 8 12 9 9 12 16 8 8 31 32 21 18 21 9 30 9 36 34 35 13 17 8 Refer to "2.4 CD-R CORE ASSY(1/2)", "2.5 CD-R CORE ASSY(2/2)". KU/CA type only KU/CA type only 33 Refer to "2.3 FRONT PANEL ASSY)" KU/CA Type Only 14 NOTE This Parts of no service part. partially of the PCB board of COMPLEX Assy. NOTE H D A www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 7 PDR-609 (1) EXTERIOR SECTION PARTS LIST Mark No. Description Part No. 1 AUDIO ASSY See Contrast table (2) 2 AC Inlet See Contrast table (2) 3 25P Flexible Cable/60v PDD1220 4 9P Flexible Cable/60v PDD1221 5 Connector Ass'y (8p) PDE1311 6 Connector Ass'y (6p) PDE1314 7 Power Supply Unit PWR1029 8 Screw (Steel) ABA1011 9 Screw (Steel) ABA1207 NSP 10 Under Base PNA2560 11 Rear Base 609 (Mtl) See Contrast table (2) NSP 12 Mecha Base (Mtl) PNB1623 13 Shield Case (Mtl) PNB1630 14 Shield Plate (Mtl) See Contrast table (2) NSP 15 PCB Holder PNW2029 16 Insulator PNW2766 NSP 17 CD-R CORE Ass'y PXA1631 NSP 18 Caution Label See Contrast table (2) 19 Disc Caution Label See Contrast table (2) 20 • • • • • KU/CA WV WY type type type 1 AUDIO ASSY PWZ4098 PWZ4099 PWZ4099 2 AC Inlet AKP7025 AKP7005 AKP7005 11 Rear Base 609 (Mtl) PNA2562 PNA2563 PNA2563 14 Shield Plate (Mtl) PNB1631 Not used Not used NSP 18 Caution Label PRW1516 Not used Not used 19 Disc Caution Label PRW1532 Not used Not used 26 Caution Label HE Not used Not used PRW1233 27 Caution Label Not used Not used VRW1094 28 Caution Label Not used PRW1018 Not used 34 Bush ABF1015 Not used Not used 35 Nylon Rivet AEC1160 Not used Not used 36 Shield Finger PBK1153 Not used Not used (2) CONTRAST TABLE PDR-609/KU/CA, WV and WY types are constructed the same except for the following: 21 Screw BBZ30P080FCC 22 Screw BBZ40P080FCC 23 Screw FBT40P080FZK 24 Binder PEC-107 25 Bonnet (Fe) PYY1147 26 Caution Label HE See Contrast table (2) 27 Caution Label See Contrast table (2) 28 Caution Label See Contrast table (2) 29 Power Button B (Abs) PAC2003 30 Tray Panel (Abs) PNW2972 31 CD-R CORE PCB ASSY PYY1286 32 Screw PPZ30P080FMC 33 Fuse (FU1: 2A) 215002 34 Bush See Contrast table (2) 35 Nylon Rivet See Contrast table (2) 36 Shield Finger See Contrast table (2) Mark No. Description Part No. Mark Part No. Symbol and Description No. Remarks www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 8 PDR-609 2.3 FRONT PANEL SECTION (1) FRONT PANEL SECTION PARTS LIST Mark No. Description Part No. 1 OPERATING ASSY See Contrast table (2) NSP 2 HEADPHONE ASSY See Contrast table (2) NSP 3 VOLUME ASSY See Contrast table (2) 4 Knob (Abs) PAC1707 5 Vol Knob (Pls) PAC1901 6 • • • • • 7 Mode Button B (Abs) PAC2004 8 Play Button B (Abs) PAC2005 9 Manual Button B L (Abs) PAC2006 10 Manual Button B R (Abs) PAC2007 11 Rec Button B (Abs) PAC2025 Mark No. Description Part No. 12 Name Plate PAM1776 13 Display Window OR See Contrast table (2) 14 LED Lens(Abs) PNW2745 15 Front Panel See Contrast table (2) 16 • • • • • 17 Sub Panel (Abs) PNW2975 18 Jog Knob B (Pls) RAC2210 24 Screw With Washer ABA1005 25 19P Flexible Cable/60v PDD1219 26 CD-R Getter Label AAX7837 27 Screw PPZ30P080FMC NSP 28 Rimocon Sheet AEE7021 (2) CONTRAST TABLE PDR-609/KU/CA, WV and WY types are constructed the same except for the following: Accessories of VR Assy. A A 9 10 17 14 3 1 27 27 28 27 25 15 13 18 5 26 12 11 8 7 2 4 24 G E F KU/CA WV WY type type type 1 OPERATING ASSY PWZ4108 PWZ4109 PWZ4109 NSP 2 HEADPHONE ASSY PWZ4118 PWZ4119 PWZ4119 NSP 3 VOLUME ASSY PWZ4128 PWZ4129 PWZ4129 13 Display Window OR PAM1826 PAM1827 PAM1827 15 Front Panel PNW2971 PNW2976 PNW2976 Mark Part No. Symbol and Description No. Remarks www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 9 PDR-609 • Bottom View 9 1 3 12 13 7 11 16 10 14 15 2 18 17 To CD-R CORE CN101 Refer to "2.5 CD-R CORE ASSY (2/2)". 4 6 5 19 8 B • CD-R CORE ASSY(1/2) PARTS LIST Mark No. Description Part No. Mark No. Description Part No. 2.4 CD-R CORE ASSY (1/2) NSP 1 LOAB Assy VWG2171 2 32P Flexible Cable / 30V PDD1222 3 Connector Assy PG03KK-E07 4 DC Motor (LOADING) PXM1027 5 Connector Assy 2P VKP2253 6 Motor Pulley PNW1634 7 Loading Motor Assy VXX2505 8 Clamper Plate VNE2162 9 Rubber Belt VEB1320 10 Loading Base S PNW2968 11 Tray VNL1910 12 Gear Pulley VNL1866 13 Loading Gear VNL1860 14 Drive Gear VNL1861 15 Drive Cam VNL1862 16 Lock Plate VNL1820 17 Bridge VNL1859 18 Clamper VNL1738 19 Screw JGZ179028FMC www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 10 PDR-609 Use nippers or other tool to cut the two sections marked A in figure 1 . While supporting the spindle motor shaft with the stopper, put spacer on top of the carriage base, and stick the disc table on top (takes about 9kg pressure). Take off the spacer. Spacer Spacer OK NG A 2 1 2.8mm 11mm Disc table Assy (Pressure of about 9kg) Carriage Base PCB Stopper Spindle motor Spacer setting Position Spacer Servo Base A 1 2 How to Install the Disc Table 11 20 15 7 25 21 4 8 18 19 16 2 22 To CD-CORE CN452 17 3 24 24 1 5 26 27 (Gray) (Black) 4 9 10 24 1 12 14 22 16 6 13 • Bottom View C 2.5 CD-R CORE ASSY (2/2) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 11 PDR-609 Mark No. Description Part No. • CD-R CORE ASSY(2/2) PARTS LIST NSP 1 MECHA PCB Assy PWX1625 2 DC Motor (SPINDLE) PXM1044 NSP 3 DC Motor (CARRIAGE) PXM1045 4 Float Rubber PEB1308 5 Carriage Motor Assy PEA1353 NSP 6 Rack Spring DBH1285 NSP 7 Reflection Sheet PNM1325 8 Float Base PNW2964 9 Pinion Gear PNW2994 10 Gear A PNW2855 11 Gear B PNW2856 12 Gear C PNW2969 13 Rack PNW2965 14 Rack Stopper PNW2966 NSP 15 Disc Table PNW2860 16 Carriage Base PNW2967 17 Flexible Cable (08P) VDA1822 18 Guide Bar VLL1504 19 Sub Guide Bar VLL1505 NSP 20 Magnet VYM1024 21 CD-R Pickup PEA1356 22 Screw Z39-018 23 • • • • • 24 Screw JGZ17P028FMC 25 Disc Table Assy PEA1349 26 Floating Spring (Gray) PBH1232 27 Floating Sprin B (Black) PBH1234 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 12 A B C D 1 2 3 4 1 2 3 4 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM 3.1 BLOCK DIAGRAM FG M PC651 NJL5809K-F1 DC MOTOR ASSY (SPINDLE) PXM1044 CN1 CN101 CN502 CN302 CN601 A CD-R PICKUP PEA1356 17.2872MHz 17.2872MHz WRF FE RFDC CDLRCK BOUT AOUT BOUT AOUT A–H IC101 AK8567 RF PROCESSOR IC251-IC254 RUNNING OPC CIRCUIT BLOCK LD CONTROL CIRCUIT IC201 PA9007A SERVO AMP IC IC301 PE5190A MECHANISM CONTROL µCOM. X501 IC401 CXD2585Q CD DECODER IC451 BA5810FP TRK DRIVER FCS DRIVER SLD DRIVER SPDL DRIVER LOADING DRIVER IC501 PDC069A EFM ENCODER IC IC504 PCX1027 VCO IC IC503 LC324265AT-25 D-RAM IC302 MM1522XU TEMPERATURE SENSOR IC IC303 PYY1287 (BR93LC66F) EEPROM Disc (CD, CD-R, CD-RW) 33.8688MHz 24 25 18 19 17 26 20 23 29 32 30 31 29 32 30 15 48 89 43 65 39 41 50 31 24 25 18 19 17 26 20 B C D E F G H FCS+ FCS+ FCS– TRK+ TRK– FG SPDL 23 A B C D 10 88 31 52 19 TE TE Address Data RFDC RFDC 9 RFAC FE TE RFAC 80 131 E F G H MECHA PCB ASSY C CD-R CORE PCB ASSY A 1 1 2 M CARRIAGE MOTOR ASSY (SLIDER) PEA1353 SL 4 6 CN452 FG FG SPDL SPDL 1 7 8 SL 4 6 CN453 M LOADING MOTOR ASSY VXX2505 L L L L 4 5 57 58 59 4 91 98 RFWBL 39 16 FCS– 17 TRK+ 18 11 12 13 14 9 10 TRK– CDBCK 67 CDDATA 66 CDTX CDLRCK CDBCK CDDATA CDTX 64 136 134 135 137 158 159 160 117 58 84 83 85 ADLRCK ADBCK ADDATA DALRCK DAMCK 79 DADATA 78 DABCK DIN3 DIN2 DIN1 DOUT 77 5 2 3 16 13 14 : RF SIGNAL ROUTE : AUDIO SIGNAL ROUTE : OPTICAL SIGNAL ROUTE : COAXIAL SIGNAL ROUTE : AUDIO SIGNAL (DIGITAL) ROUTE : AUDIO SIGNAL (REC) ROUTE 7 21 22 24 20 CN901 V+5A V+5D V+6P 1 3 5 2 (OP) (CO) (D) (R) (CO) (OP) (OP) (25P) (9P) (6P) CD-R CORE ASSY (PXA1631) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 13 A B C D 5 6 7 8 5 6 7 8 CN401 CN701 CN601 CN602 JA652 JA651 JA654 JA653 JA801 JA1403 CN410 CN402 CN801(1/2) CN801(2/2) CN807(2/2) CN807(1/2) JA403 VR802 REC VR COAXIAL IN OPTICAL IN OPTICAL OUT COAXIAL OUT IC803 AK4524VF A/D CONVERTER IC801 NJM4565M INPUT IC701 PDC066 MODE CONTROL MICROCOMPUTER D701 D702 V701 PEL1101 FL DISPLAY KEY MATRIX PHONES IC401 PE8001A D/A CONVERTER IC404 NJM4558MD IC405 BA4560F VR401 HEADPHONE VR IC601 IC601 TC74HCU04AF L602 OUTPUT L ch R ch AUDIO ASSY D VR ASSY F OPERATING ASSY G POWER SUPPLAY UNIT H 85 86 ADDATA ADBCK ADDATA DAMCK DIN3 DIN1 DITOUT DIN1 DOUT DIN3 13 11 1 1 7 7 3 3 5 5 DALRCK LRCK DADATA DABCK 1 2 3 16 13 1 2 3 4 2 3 4 5 5 2 3 16 13 14 7 21 22 24 20 1 CN901 CN201 CN202 5 1 8 1 8 3 6 3 6 1 3 3 2 27,28 25,26 3 6 1 HEADPHONE VR ASSY E 4 5 Lch Rch 12 14 BCK DATA V+16A GND V+16A V+12A IC901 V-16A GND V-16A V-12A IC902 V+8A V+8A V+5D V+5A IC903 2 3 4 5 10 2 3 4 5 10 +5V REG. +5V REG. +6V REG. +16V REG. -16V REG. SWITING REGULATOR 1 3 5 2 (OP) (OP) (CO) (CO) (CO) (OP) (OP) (R) (R) (R) (R) (R) 4 4 (25P) (6P) (14P) (14P) (19P) (19P) (5P) (8P) (8P) (8P) (8P) (5P) (9P) KU/CA: AC120V WV, WY: AC220- AC240V WY and wv types Only KU/CA type Only 10 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 14 A B C D 1 2 3 4 1 2 3 4 3.2 OVERALL CONNECTION DIAGRAM CD-R CORE PCB ASSY (PYY1286) A CD-R CORE ASSY (PXA1631) MECHA PCB ASSY (PWX1625) C POWER SUPPLY UNIT (PWR1029) H CN901 CN602 CN302 CN202 CN901 CN401 CN502 CN201 LOAB ASSY (VWG2171) B CD-R PICKUP (PEA1356) Refer to page18 A 1/5- A 5/5 CN101 CN451 CN601 CN452 CN1 CN101 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 15 A B C D 5 6 7 8 5 6 7 8 Note : When ordering service parts, be sure to refer to "EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST". OPERATING ASSY (KU/CA: PWZ4108) (WV, WY: PWZ4109) G HEADPHONE ASSY (KU/CA : PWZ4118) (WV, WY: PWZ4119) E AUDIO ASSY (KU/CA : PWZ4098) (WV, WY: PWZ4099) D VOLUME ASSY (KU/CA : PWZ4128) (WV, WY: PWZ4129) F CN601 CN402 CN801 CN807 CN410 CN701 D 1/2- D 2/2 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 16 A B C D 1 2 3 4 1 2 3 4 3.3 CD-R CORE PCB ASSY (1/5) 1/5 A 2/2 1/2 PYY1196 RESET THERMO SENSOR EEEPROM CD-R CORE PCB ASSY (PYY1286) A 1/5 A 4/5 A 3/5 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 17 A B C D 5 6 7 8 5 6 7 81/5 A PE5190B MECHA CONTROL MICROCOMPUTER 8 BIT LATCH NC : The power supply is shown with the marked box. A 5/5 A 3/5 A 2/5 A 2/5,4/5 D 2/2 CN602 CN302 3 5 4 1 6 10 9 8 7 2 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 18 A B C D 1 2 3 4 1 2 3 4 2/5 A 3.4 CD-R CORE PCB ASSY (2/5) A 3/5 A 1/5 A 4/5 A 1/5 (R) (R) CN101 CN1 CD-R CORE PCB ASSY (PYY1286) CD-R PICKUP (PEA1356) A 2/5 11 12 (R) (R) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 19 A B C D 5 6 7 8 5 6 7 82/5 A 2/2 F rank: 1% F rank: 1% 2/2 1/2 1/2 A 3/5 A 1/5 A 4/5 A 5/5 A 3/5 A 1/5 A 4/5 CN102 TP_POINT RF PROCESSOR : RF SIGNAL ROUTE : AUDIO SIGNAL ROUTE (REC) 14 13 15 16 17 (R) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 20 A B C D 1 2 3 4 1 2 3 4 3/5 A 3.5 CD-R CORE PCB ASSY (3/5) 2/2 2/2 2/2 2/2 1/2 1/2 1/2 1/2 CD-R CORE PCB ASSY (PYY1286) A 3/5 A 2/5 A 5/5 A 2/5 18 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 21 A B C D 5 6 7 8 5 6 7 83/5 A NC NC NC NC NC NC NC SERVO AMP MULTI PLEXER A 1/5 A 2/5 A 4/5 A 4/5 A 1/5 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 22 A B C D 1 2 3 4 1 2 3 4 4/5 A 3.6 CD-R CORE PCB ASSY (4/5) EFM ENCODER 4M DRAM NC A 1/5 A 5/5 A 5/5 A 1/5 (OP) (OP) 23 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 23 A B C D 5 6 7 8 5 6 7 84/5 A CD-R CORE PCB ASSY (PYY1286) A 4/5 A 3/5 A 5/5 D 1/2 CN401 A 2/5 A 5/5 A 2/5 A 2/5 A 3/5 (R) (D) (OP) (D) (OP) (D) (D) (R) (R) (R) (D) (D) (D) : AUDIO SIGNAL ROUTE (REC) : AUDIO SIGNAL ROUTE (DIGITAL) : AUDIO SIGNAL ROUTE (OPTICAL) 22 21 20 19 24 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 24 A B C D 1 2 3 4 1 2 3 4 5/5 A 3.7 CD-R CORE PCB ASSY (5/5) B C F rank (1%) A 3/5 A 4/5 A 2/5 CD-R CORE PCB ASSY (PYY1286) A 5/5 MECHA PCB ASSY (PWX1625) C LOAB ASSY (VWG2171) B PC651 NJL5809K-F1 CARRIAGE MOTOR ASSY (SLIDER) PEA1359 DC MOTOR ASSY (SPINDLE) PXM1044 J601 CN601 CN101 S601 S101 LOADING MOTOR PXM1027 VKP2253 08FM-1.0ST CN452 CN451 CN453 R602 R651 240 PSG1014 27 25 26 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 25 A B C D 5 6 7 8 5 6 7 85/5 A A 1/5 A 2/5 A 1/5 A 4/5 : The power supply is shown with the marked box. CN901 CN202 H SIGNAL ROUTE : RF SIGNAL : AUDIO SIGNAL (DIGITAL) (D) (D) (D) 28 F rank (1%) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 26 A B C D 1 2 3 4 1 2 3 4 Media Pickup Position SPDLG1 (IC501-pin97) SPDLG3 (IC501-pin99) CD Inner 5V 0V Outer 0V 5V CD-R CD-RW 12cm Inner 5V 0V 12cm Outer 0V 5V 8cm CD-R 0V 5V STOP 5V 5V • Spindle System • Digital Input System • Audio System VOLTAGES and WAVEFORMS CD-R CORE PCB ASSY A 4/5 CD-R CORE PCB ASSY A 1/5 CD-R CORE PCB ASSY A 4/5 CD-R CORE PCB ASSY A 4/5 • Others CD-R CORE PCB ASSY A 1/5 at FS = 44.1 kHz Others XVCO (IC501-pin 101) 0V 5V CLV (IC301-pin 30) ECLV (IC301-pin 29) STOP 0V 0V CAV, W-CLV 5V 0V E-CLV 5V 5V Operating Mode A/D Converter used at Analog REC Pause, REC, Monitor Others ADCSTBY (CN502-pin 4) 5V 0V Signal Logic * Inner: Absolute time is less than 23 minutes. Outer: Absolute time is more than 23 minutes. * W-CLV: WOBBLECLV , E-CLV: EFMCLV at DIGITAL LOCK at DIGITAL UNLOCK DIRERR (IC501-pin 142) 0V 5V at MUTE ON (Audio Signal Not Output) at MUTE OFF (Audio Signal Output) AMUTE (CN502-pin 9) 5V 0V XPFAIL (CN302-pin 9) 5V Note : The encircled numbers denote measuring point in the schematic diagram. 1 CN302 - pin 1 (MSI) V: 200mV/div. , H: 5msec/div. 2 CN302 - pin 2 (MSO) V: 200mV/div. , H: 5msec/div. 3 CN302 - pin 5 (MSCK) V: 200mV/div. , H: 500nsec/div. (PLAY) 4 CN302 - pin 7 (SYSREQ) V: 200mV/div. , H: 5msec/div. 5 CN302 - pin 8 (MACK) V: 200mV/div. , H: 5msec/div. 6 IC301 - pin 21 (CLOCKDEC) V: 200mV/div. , H: 5msec/div. 7 IC301 - pin 24 (XLATDEC) V: 200mV/div. , H: 5msec/div. 8 IC301 - pin 25 (CLOCKRF) V: 200mV/div. H: 5msec/div. 9 IC301 - pin 26 (DATA) V: 200mV/div. , H: 5msec/div. 10 IC301 - pin 27 (XLATRF) V: 200mV/div. , H: 5msec/div. CD-R CORE PCB ASSY A 1/5 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 27 A B C D 5 6 7 8 5 6 7 8 11 CN101 - pin 29 (F+) V: 200mV/div. , H: 20µsec/div. 12 CN101 - pin 30 (T+) V: 200mV/div. , H: 20µsec/div. 13 CN102 - pin 1 (EQRF) V: 20mV/div. , H: 500nsec/div. (PLAY) 14 CN102 - pin 2 (RF) V: 50mV/div. , H: 500nsec/div. (PLAY) 17 CN102-pin 8 (FE) V: 20mV/div. , H: 2msec/div. (PLAY) 18 Foot of R212 (SPDL) V: 20mV/div. , H: 2msec/div. (PLAY) 15 CN102 - pin 4 (MPP) V: 20mV/div. , H: 2msec/div. (PLAY) 16 CN102 - pin 5 (TE) V: 20mV/div. , H: 2msec/div. (PLAY) 19 IC501 - pin 37 (REWLDON) V: 200mV/div. , H: 1msec/div. (REC) RW 20 IC501 - pin 38 (WLDON) V: 200mV/div. , H: 1msec/div. (REC) 21 IC501 - pin 45 (ODON) V: 200mV/div. , H: 200nsec/div. (REC) 22 IC501 - pin 48 (WDAT) V: 200mV/div. , H: 200nsec/div. (REC) 23 IC501 - pin 126 (SPDO) V: 200mV/div. , H: 100µsec/div. (REC) 24 Foot of R583 (ATFG) V: 200mV/div. , H: 20µsec/div. (REC) 25 CN452 - pin 4 (SL+) V: 200mV/div. , H: 5msec/div. (PLAY) 26 CN452 - pin 7 (SP+) V: 200mV/div. , H: 5msec/div. (PLAY) 27 CN452 - pin 1 (FG) V: 200mV/div. , H: 1msec/div. (PLAY) 28 IC401 - pin 25 (MDP) V: 200mV/div. , H: 5µsec/div. (PLAY) CD-R CORE PCB ASSY A 2/5 CD-R CORE PCB ASSY A 4/5 CD-R CORE PCB ASSY A 5/5 CD-R CORE PCB ASSY A 3/5 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 28 A B C D 1 2 3 4 1 2 3 4 3.8 AUDIO ASSY (1/2) WV and WY type only KU/CA WY, WV AUDIO ASSY (KU/CA: PWZ4098) (WV,WY: PWZ4099) D 1/2 D 2/2 D 2/2 A 4/5 CN401 D 2/2 CN201 CN502 H : The power supply is shown with the marked box. CN901 KU/CA KU/CA type only WY, WV SIGNAL ROUTE : AUDIO SIGNAL : OPTICAL SIGNAL : COAXI AL SIGNAL : AUDIO SIGNAL (DIGITAL) : AUDIO SIGNAL (REC) (OP) (CO) (D) (R) (D) (D) (D) (D) (D) (OP) (OP) (CO) (CO) (R) 1/2 D www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 29 A B C D 5 6 7 8 5 6 7 8 1/2 D E KU/CA type only WV and WYtype only CN410 CN402 KU/CA WY, WV R419 4.7K 4.7K 0 0 180 180 100(RD) 100(RD) 1K 1K 1.8K 1.8K 1.8K 1.8K 100(RDR) 100(RDR) R420 R421 R422 R423 R424 R2429 R2430 KU/CA WY, WV C425 470P 470P 220/25 220/25 22/50 22/50 1500P 1500P PCH1128 PCH1128 PCH1124 PCH1124 C426 C427 C428 C431 C432 D 2/2 HEADPHONE ASSY (KU/CA : PWZ4118) (WV, WY: PWZ4119) E A B A B BA4560F www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 30 A B C D 1 2 3 4 1 2 3 4 3.9 AUDIO ASSY (2/2) AUDIO ASSY (KU/CA: PWZ4098) (WV, WY: PWZ4099) D 2/2 VOLUME ASSY (KU/CA: PWZ4128) (WV, WY: PWZ4129) F CN801 CN807 COAX OUT COAX IN SR IN TEXT SR OPT OUT OPT IN OPT IN LINE IN Lch LINE IN Rch (OP) (OP) (OP) (CO) (CO) (OP) (OP) (OP) (CO) (CO) (CO) (CO) (R) (R) (R) (R) (R) (R) (R) (R) KU/CA WY, WV C803 22/50 22/50 22/50 220/25 220/50 22/50 10/50 10/50 PCH1124 PCH1124 PCH1124 PCH1128 PCH1128 PCH1124 PCH1128 PCH1128 C804 C811 C815 C819 C820 C832 C836 2/2 D F www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 31 A B C D 5 6 7 8 5 6 7 82/2 D CN601 CN602 D 1/2 A 1/5 CN701 CN302 G : The power supply is shown with the marked box. SIGNAL ROUTE : AUDIO SIGNAL : AUDIO SIGNAL (REC) : OPTICAL SIGNAL : COAXI AL SIGNAL (OP) (R) (CO) (OP) (OP) (OP) (OP) (CO) (CO) (R) (R) (R) KU/CA type only KU/CA type only WV, WY type only www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 32 A B C D 1 2 3 4 1 2 3 4 G 3.10 OPERATING ASSY KU/CA WV, WY S702: S703: S704: SYNCHRO S705: S706: S707: TEXT S708: MENU/DELETE S709: OPEN/CLOSE S710: RECORD S711: REC MUTE S712: SCROLL S713: TIME S714: DISPLAY/CHARA S715: MONITER S716: ERASE S717: FINALIZE S718: AUTO/MANUAL S719: INPUT www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 33 A B C D 5 6 7 8 5 6 7 8G : The power supply is shown with the marked box. D 2/2 CN601 KU and WY type Only OPERATING ASSY (KU/CA: PWZ4108) (WV, WY: PWZ4109) G CN701 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 34 A B C D 1 2 3 4 1 2 3 4 H 3.11 POWER SUPPLY ASSY • NOTE FOR FUSE REPLACEMENT FOR CONTINUED PROTECTION AGAINST RISK OF FIRE. REPLACE WITH SAME TYPE NO.215002 MFD. BY LITTELFUSE INC. FOR FU1. CAUTION - CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE. REPLACE WITH SAME TYPE NO. 491.800 MFD. BY LITTELFUSE INC. FOR IC3. AC IN FU1: 2A 250V (215002) POWER SUPPLAY ASSY (PWR1029) H 491.800 (800mA) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 35 A B C D 5 6 7 8 5 6 7 8H CN901 CN901 D 1/2 A 5/5 CAUTION : FOR CONTINUED PROTECTION AGAINST RISK OF FIRE. REPLACE WITH SAME TYPE NO. 49101.6 MFD. BY LITTELFUSE INC. FOR IC1, IC2 and IC4 . 49101.6 (1.6A) 49101.6 (1.6A) 49101.6 (1.6A) CN201 CN202 marked parts: Only these parts are supplied as service parts. No. FU1 Service Parts IC01 IC03 IC02 IC04 Part No. 215002 (2A) 49101.6 (1.6A) 49101.6 (1.6A) 491.800 (0.8A) 49101.6 (1.6A) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 36 A B C D 1 2 3 4 1 2 3 4 4. PCB CONNECTION DIAGRAM NOTE FOR PCB DIAGRAMS : 1. Part numbers in PCB diagrams match those in the schematic diagrams. 2. A comparison between the main parts of PCB and schematic diagrams is shown below. 3. The parts mounted on this PCB include all necessary parts for several destinations. For further information for respective destinations, be sure to check with the schematic diagram. 4. View point of PCB diagrams. Symbol In PCB Diagrams Symbol In Schematic Diagrams Part Name B C E D D G G S S B C E B C E D G S B C E B C E B C E Transistor Transistor with resistor Field effect transistor Resistor array 3-terminal regulator Capacitor Connector P.C.Board Chip Part SIDE A SIDE B www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 37 A B C D 1 2 3 4 1 2 3 4C B 4.1 LOAB and MECHA PCB ASSYS M M CARRIAGE MOTOR SPINDLE MOTOR MECHA PCB ASSY C MECHA PCB ASSY C LOAB ASSY B A CN451 A CN452 (PNP1476-A) (PNP1476-A) (VNP1762-A) SIDE A SIDE B www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 38 A B C D 1 2 3 4 1 2 3 4 A 4.2 CD-R CORE PCB ASSY (PNP1477-B) IC307 IC308 IC306 IC309 IC255 IC161 IC305 IC421 IC304 IC422 IC401 IC201 IC931 IC506 Q203 Q204 Q101 IC502 IC107 IC504 IC507 IC303 IC102 IC103 LOADING MOTOR CD-R CORE PCB ASSY A Q451 Q452 SIDE A www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 39 A B C D 1 2 3 4 1 2 3 4A SIDE B (PNP1477-B) IC207 IC206 IC251 IC301 Q402 Q201 Q202 Q401 IC253 IC252 IC451 IC101 IC310 IC501 IC503 Q502 IC254 CN101 B CN401 D CN602 D To CD-R PICKUP CN601 C CN201 H CD-R CORE PCB ASSY A www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 40 A B C D 1 2 3 4 1 2 3 4 4.3 AUDIO, HEADPHONE and VOLUME ASSYS (PNP1478-A) (PNP1478-A) AUDIO ASSY D VOLUME ASSY F HEADPHONE ASSY E A CN701 G CN502 A D E F SIDE A www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 41 A B C D 5 6 7 8 5 6 7 8 (PNP1478-A) CN302 A CN201 H Q407 Q408 Q401 Q402 IC902 IC901 IC903 Q409 Q410 SIDE A D www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 42 A B C D 1 2 3 4 1 2 3 4 (PNP1478-A) IC404 Q405 Q404 Q403 IC801 IC405 IC601 AUDIO ASSY D SIDE B D www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 43 A B C D 5 6 7 8 5 6 7 8 (PNP1478-A) (PNP1478-A) IC803 IC804 IC401 Q404 Q403 IC403 IC402 VOLUME ASSY F HEADPHONE ASSY E F E D SIDE B www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 44 A B C D 1 2 3 4 1 2 3 4 4.4 OPERATING ASSY G (PNP1478-A) (PNP1478-A) OPERATING ASSY G OPERATING ASSY G Q702 Q701 Q712 Q713 SIDE A SIDE B www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com PDR-609 45 A B C D 5 6 7 8 5 6 7 8G IC701 IC702 IC706 CN601 D SIDE A SIDE B www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 46 PDR-609 5.1 LIST OF WHOLE PCB ASSEMBLIES CONTRAST OF PCB ASSEMBLIES Mark Part No. Remarks Symbol and Description KU/CA WV WY type type type CD-R CORE PCB ASSY PYY1286 PYY1286 PYY1286 NSP MECHA PCB ASSY PWX1625 PWX1625 PWX1625 NSP LOAB ASSY VWG2171 VWG2171 VWG2171 NSP COMPLEX ASSY PWM2315 PWM2316 PWM2316 AUDIO ASSY PWZ4098 PWZ4099 PWZ4099 OPERATING ASSY PWZ4108 PWZ4109 PWZ4109 NSP HEADPHONE ASSY PWZ4118 PWZ4119 PWZ4119 NSP VOLUME ASSY PWZ4128 PWZ4129 PWZ4129 POWER SUPPLY UNIT PWR1029 PWR1029 PWR1029 OPERATING ASSY PWZ4108 and PWZ4109 are constructed the same except for the folloWing: G PWZ4108 PWZ4109 R781 Not used RS1/10S473J R785 RS1/10S473J Not used Mark Part No. Remarks Symbol and Description HEADPHONE ASSY Although PWZ4118 and PWZ4119 are different in part number, they consist of the same components. E VOLUME ASSY Although PWZ4128 and PWZ4129 are different in part number, they consist of the same components. F 5. PCB PARTS LIST NOTES : ÷ Parts marked by “ NSP ” are generally unavailable because they are not in our Master Spare Parts List. ÷ The mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation. ÷ When ordering resistors, first convert resistance values into code form as shown in the following examples. Ex. 1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J = 5%, and K = 10%). 560 Ω = 56 × 10 1 = 561 ................................................... RD1/4PU 5 6 1 J 47k Ω = 47 × 10 3 = 473 .................................................. RD1/4PU 4 7 3 J 0.5 Ω = R50 ...................................................................... RN2H  5 0 K 1 Ω = 1R0 ......................................................................... RS1P 1  0 K Ex. 2 When there are 3 effective digits (such as in high precision metal film resistors). 5.62k Ω = 562 × 10 1 = 5621 ........................................... RN1/4PC 5 6 2 1 F www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 47 PDR-609 Mark No. Description Part No. PCB PARTS LIST FOR PDR-609/KU/CA UNLESS OTHERWISE NOTED Mark No. Description Part No. A CDR-CORE ASSY SEMICONDUCTORS IC101 AK8567 IC252–IC254, IC421 BA4510F IC451 BA5810FP IC303 BR93LC66F IC401 CXD2585Q IC255 HD74HC4053FP IC310 HD74HC573T IC502 LC324265AT-25 IC102, IC103, IC304 LM358M IC309 LP2980IM5-4.5 IC161 MM1385AN IC302 MM1522XU IC251 NJU7016M IC201 PA9007A IC504 PCX1027 IC501 PDC069A IC301 PE5190B IC503 PQ20WZ51 IC931 PST9245 IC307 TC7S00F IC506 TC7S02F IC308 TC7S14F IC507 TC7WU04F Q451, Q452 2SK208 Q204, Q205, Q401, Q402 DTA124EK Q501 DTA143EK Q101, Q201, Q203 DTC114TK Q502 DTC124EK D104, D201, D303, D451, D452 1SS355 D105, D202, D251 DA204K D252 MA704 D161, D162, D501–D503 RB521S-30 COILS AND FILTERS X301 PSS1024 X501 PSS1025 L101, L1579, L302–L304 QTL1013 L401, L402, L501–L503 QTL1013 L507, L508, L511, L513, L514 QTL1013 L517, L521, L522 QTL1013 L509, L510, L515, L516 VTL1077 L518–L520 VTL1077 CAPACITORS C901 (56µF/10V) ACH7109 C129 CCSRCH100D50 C139, C304, C307–C309, C320 CCSRCH101J50 C104, C105 CCSRCH121J50 C574 CCSRCH220J50 C406, C420 CCSRCH221J50 C106, C119, C404 CCSRCH331J50 C128, C263, C352 CCSRCH470J50 C213, C256, C474, C475, C511 CCSRCH471J50 C517, C518 CCSRCH5R0C50 C902 CEV101M6R3 C144, C151, C163, C201, C253 CEV220M6R3 C325, C501, C503, C505, C519 CEV220M6R3 C531, C537, C539, C549, C570 CEV220M6R3 C581, C582 CEV220M6R3 C281 CEV2R2M50 C101, C127, C130, C401, C409 CEV470M6R3 C452 CEV470M6R3 C108, C232, C258, C543 CKSQYB105K10 C114–C117, C123, C133, C215 CKSQYB334K16 C227–C229 CKSQYB334K16 C426 CKSQYB474K16 C141, C207, C233, C252, C257 CKSRYB102K50 C322, C403, C407, C525, C932 CKSRYB102K50 C121, C137, C140, C161, C162 CKSRYB103K50 C226, C230, C231, C251, C412 CKSRYB103K50 C425, C454–C459, C470–C473 CKSRYB103K50 C515, C546, C557, C572, C583 CKSRYB103K50 C136, C198, C209, C224, C225 CKSRYB104K16 C303, C305, C306, C310, C314 CKSRYB104K16 C421, C514, C516, C521, C522 CKSRYB104K16 C547, C548 CKSRYB104K16 C208, C414 CKSRYB152K50 C122 CKSRYB222K50 C138, C259 CKSRYB223K50 C212, C451 CKSRYB272K50 C113, C205 CKSRYB333K16 C480, C481 CKSRYB471K50 C124 CKSRYB472K50 C102, C206, C413 CKSRYB473K16 C132 CKSRYB563K16 C204, C408, C468, C469 CKSRYB681K50 C125, C463, C464 CKSRYB682K50 C416, C905 CKSRYF103Z50 C107, C111, C120, C126, C131 CKSRYF473Z25 C135, C142, C145, C164, C199 CKSRYF473Z25 C202, C211, C214, C217 CKSRYF473Z25 C254, C255, C260–C262, C313 CKSRYF473Z25 C315–C319, C321, C324, C351 CKSRYF473Z25 C361, C402, C405, C410, C411 CKSRYF473Z25 C415, C453, C465, C482, C502 CKSRYF473Z25 C504, C506, C508–C510 CKSRYF473Z25 C512, C513, C520, C524 CKSRYF473Z25 C527, C528, C530, C532–C536 CKSRYF473Z25 C538, C540–C542, C545, C550 CKSRYF473Z25 C552, C554, C556, C558, C571 CKSRYF473Z25 C584, C904, C931 CKSRYF473Z25 C585 (0.22F/3.5V) PCH1145 C143 (0.1F/5.5V) PCH1146 RESISTORS R454, R472 (10Ωx4) ACN7041 R307, R308, R360, R361(22kΩx4) ACN7073 R536, R552 (100kΩx4) ACN7081 R321, R322, R503 (100Ω) DCN1092 R507–R510, R556 (100Ω) DCN1092 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 48 PDR-609 Mark No. Description Part No. Mark No. Description Part No. R1901–R1904, R901–R905 RS1/10S0R0J R116, R468, R470, R476, R478 RS1/16S1002F R114 RS1/16S1302F R115 RS1/16S1502F R465, R467 RS1/16S1603F R596 RS1/16S2001F R118, R119, R477, R479 RS1/16S2002F R464, R466 RS1/16S2202F R102 RS1/16S4701F R126 RS1/16S4703F R598 RS1/16S5100F R469, R471 RS1/16S9102F Other Resistors RS1/16S&&& J OTHERS CN101 FFC CONNECTOR 32P PKN1024 CN453 CONNECTOR 2P S2B-PH-SM3 CN451 CONNECTOR 3P S3B-PH-SM3 CN901 CONNECTOR 6P S6B-PH-SM3 CN102 CONNECTOR 8P S8B-PH-SM3 CN452 FFC CONNECTOR 8P VKN1300 CN302 FFC CONNECTOR 9P VKN1301 CN502 FFC CONNECTOR 25P VKN1317 KN901 EARTH METAL FITING VNF1109 MECHA PCB ASSY SEMICONDUCTORS PC651 NJL5809K-F1 SWITCHE S601 PSG1014 RESISTORS Other Resistors RD1/4PU&&& J OTHERS J601 D20PWW0305E LOAB ASSY OTHERS CN101 KR CONNECTOR (3P) S3B-PH-K-S SWITCHE S101 VSK1011 AUDIO ASSY (PWZ4098) SEMICONDUCTORS IC803 AK4524VF IC405 BA4560F IC404 NJM4558MD IC801 NJM4565M IC903 NJM7805FA IC901 NJM7812FA IC902 NJM7912FA IC601 TC74HCU04AF IC804 TC7SU04F Q407, Q408 2SD2144S Q402 DTA114ES Q601 DTA114TK Q401 DTC124ES D602–D604 1SS355 D801, D802 DA204K D406, D601 DAP202K COILS AND FILTERS L403, L405–L407, L603–L605 DTL1058 L803–L805, L901, L9447, L9448 OTL1040 L602 PTL1003 CAPACITORS C626, C821–C823 CCSQCH101J50 C607 CCSQCH470J50 C839 CCSQCH471J50 C832, C834, C836, C838 CEAT100M50 C602, C612, C616, C618 CEAT101M10 C909 CEAT102M16 C431, C432, C803, C804 CEAT220M50 C819, C820 CEAT220M50 C427, C428, C811, C815 CEAT221M25 C913, C914 CEAT221M25 C435, C436 CEAT470M25 C605 CKSQYB102K50 C1413, C1476, C1603, C439, C440 CKSQYB103K50 C606, C615, C809, C824, C841 CKSQYB103K50 C901, C902, C907, C951 CKSQYB103K50 C613, C831, C833, C835, C837 CKSQYB104K25 C601, C611, C617, C619, C622 CKSQYB473K25 C402, C403, C406, C437 CKSQYF103Z50 C632, C633, C637, C638, C813 CKSQYF103Z50 C1807, C1808 CQHA271J50 C433, C434 CQMBA102J50 C1421, C1422 CQMBA332J50 C1427, C1428, C425, C426 CQMBA471J50 RESISTORS R2429, R2430 RD1/2VM101J R410 RD1/2VM272J R1409, R409 RD1/2VM562J R443, R444 RD1/4VM102J R1425, R1426, R423, R424 RD1/4VM181J R431, R432 RD1/4VM223J R433, R434, R441, R442 RD1/4VM471J R1423, R1424, R1429, R1430 RD1/4VM562J R1421, R1422, R419, R420 RN1/10SE4701D R805, R806 RS1/2LMF101J Other Resistors RS1/10S&&& J OTHERS CN402 CONNECTOR 5P 05PL-FJ CN901 CONNECTOR 14P 14R-FJ CN601 FFC CONNECTOR 19P 9604S-19C JA601 OPTICAL LINK IN GP1FA550RZ JA604 OPTICAL LINK OUT GP1FA550TZ JA605 1P JACK (ORG) PKB1028 JA603 1P JACK (ORG) PKB1033 JA606, JA607 JACK PKN1004 JA1403 4P JACK VKB1132 CN602 FFC CONNECTOR 9P VKN1240 CN401 FFC CONNECTOR 25P VKN1256 KN401–KN403, KN601 VNF1084 EARTH METAL FITTING B C D www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 49 PDR-609 Mark No. Description Part No. Mark No. Description Part No. D AUDIO ASSY (PWZ4099) SEMICONDUCTORS IC803 AK4524VF IC405 BA4560F IC404 NJM4558MD IC801 NJM4565M IC903 NJM7805FA IC901 NJM7812FA IC902 NJM7912FA IC401 PE8001A IC601 TC74HCU04AF IC402, IC804 TC7SU04F Q407–Q410 2SD2144S Q402 DTA114ES Q404, Q601 DTA114TK Q403 DTA124EK Q405 DTC124EK Q401 DTC124ES D602–D604 1SS355 D401, D801, D802 DA204K D403 DAN202K D404–D406, D601 DAP202K COILS AND FILTERS L403, L405–L407, L603–L605 DTL1058 L402, L404, L803–L805, L901 OTL1040 L9447, L9448 OTL1040 L602 PTL1003 CAPACITORS C413–C415, C626, C821–C823 CCSQCH101J50 C444–C446, C607 CCSQCH470J50 C834, C838 CEAT100M50 C602, C612, C616, C618 CEAT101M10 C903, C904, C908 CEAT101M25 C913, C914 CEAT102M35 C435, C436, C952 CEAT470M25 C605 CKSQYB102K50 C1476, C1603, C401, C403 CKSQYB103K50 C439, C440, C606, C615, C809 CKSQYB103K50 C824, C841, C901, C902, C907 CKSQYB103K50 C951 CKSQYB103K50 C404, C409, C613, C831, C833 CKSQYB104K25 C835, C837 CKSQYB104K25 C601, C611, C617, C619, C622 CKSQYB473K25 C406, C437, C632, C633, C638 CKSQYF103Z50 C813 CKSQYF103Z50 C442, C443 CKSQYF473Z25 C1807, C1808 CQHA271J50 C433, C434 CQMBA102J50 C423–C426, C429, C430 CQMBA152J50 C405, C410, C909 (470µF/6.3V) PCH1123 C421, C422, C431, C432 (47µF/50V) PCH1124 C803, C804, C819, C820 (47µF/50V) PCH1124 C407, C408, C420 (4.7µF/50V) PCH1127 C427, C428, C811 (220µF/25V) PCH1128 C815, C832, C836 (220µF/25V) PCH1128 RESISTORS R410 RD1/2VM272J R1409, R409 RD1/2VM562J R443, R444 RD1/4VM102J R425–R428 RD1/4VM103J R423, R424 RD1/4VM182J R431, R432 RD1/4VM223J R433, R434, R441, R442 RD1/4VM471J R2429, R2430 RDR1/2PM101J R421, R422 RN1/10SE1801D R805, R806 RS1/2LMF101J Other Resistors RS1/10S&&& J OTHERS CN402 CONNECTOR 5P 05PL-FJ CN901 CONNECTOR 14P 14R-FJ CN601 FFC CONNECTOR 19P 9604S-19C JA601 OPTICAL LINK IN GP1FA550RZ JA604 OPTICAL LINK OUT GP1FA550TZ JA605 1P JACK (ORG) PKB1028 JA603 1P JACK (ORG) PKB1033 JA606, JA607 JACK PKN1004 JA1403 4P JACK VKB1132 CN602 FFC CONNECTOR 9P VKN1240 CN401 FFC CONNECTOR 25P VKN1256 KN401–KN403, KN601 VNF1084 EARTH METAL FITTING OPERATING ASSY SEMICONDUCTORS IC709 BR24C64F IC701 PDC066A IC706 TC74HC00AF Q711, Q712 2SC2412K Q701, Q702 DTA124EK D701, D702 SLR-343VC COILS AND FILTERS X701 (10MHz) DSS1048 SWITCHES S701 RSC1003 S702–S719 VSG1009 CAPACITORS C707, C711, C712 CCSQCH101J50 C1701, C702, C703 CEAL101M6R3 C705, C706, C710, C721 CKSQYB103K50 C733, C734, C737 CKSQYB103K50 RESISTORS R727 (22kΩ) ACN7073 Other Resistors RS1/10S&&& J OTHERS CN701 FFC CONNECTOR 19P 9604S-19C REMOTE RECEIVER UNIT GP1U27X V701 FL TUBE PEL1101 G www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 50 PDR-609 Mark No. Description Part No. HEADPHONE ASSY COILS AND FILTERS L451–L453 QTL1015 CAPACITORS C458, C459 CCSQCH102J50 C451 CKCYF473Z50 C452, C453 CKSQYF104Z25 RESISTORS VR401 (500Ω−B x2) RCV1123 OTHERS CN410 FJ CONNECTOR 5P 05R-FJ JA403 HEADPHONE JACK RKN1002 KN410 EARTH METAL FITTING VNF1084 VOLUME ASSY RESISTORS VR802 (50kΩ-A x2) PCS1017 Other Resistors RS1/10S&&& J POWER SUPPLAY UNIT SEMICONDUCTORS IC3 (800mA/125V) 491.800 IC1, IC2, IC4 (1.6A/125V) 49101.6 E F H www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 51 PDR-609 TEST MODE : ON TEST MODE : STOP CANCEL MENU/ DELETE AUTO/ MANUAL MENU/ DELETE key AUTO/ MANUAL key STOP key Power key -OFF Display Display STOP key STOP state FL all lights Press above keys more than five seconds. 6.1 DISCS TO BE USED 6.2 MEASURING INSTRUMENTS 6.3 TEST MODE • SERVO SYSTEM ADJUSTMENT 6.3.1 How to Enter the Test Mode 6.3.2 TP- POINT CD: Test disc for adjustment (STD-903) or equivalent Test disc for inspection (STD-914) or equivalent (1) Laser power meter Following power meter manufactured by Advantest Corporation or equivalent: TQ8210 + TQ82017 TQ8215 + TQ82021 TQ8215 + TQ82010 + TQ82017 LE8010 (by LEADER) (2) Oscilloscope (3) CD Jitter Meter 8 7 6 5 4 3 2 1 CN102 CN102 TP- point 1. EQRF 2. RF 3. MPXO 4. MPP 5. TE 6. VC 7. ATFM 8. FE SIDE A CD-R CORE PCB ASSY A Front 6. ADJUSTMENT www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 52 PDR-609 EXCHANGE CD-R CORE (Mechanism) ASSY Mechanical point Electric point Mechanical point Electric point CD-R Pickup Exchange Mechanism Assy Spindle Motor Exchange Mechanism Assy 6.4 NECESSARY ADJUSTMENT POINTS When Adjustment Points 6.6 LD Power adjustment 6.7 Servo Adjustment (Automatic Adjustment) 6.7 Servo Adjustment (Automatic Adjustment) EXCHANGE CD-R CORE (PCB) ASSY Mechanical point Electric point CDRR CORE (PCB) ASSY Exchange PCB 6.6 LD Power adjustment 6.7 Servo Adjustment (Automatic Adjustment) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 53 PDR-609 - 0 6.5 OPERATIONS IN TEST MODE LD Power Adjustment (INPUT SELECTOR: ANALOG) Servo Adjustment (INPUT SELECTOR: OPTICAL) Key No. Assignment Key Contents of Movement 1 0 (OPEN/CLOSE) Tray Open/Close 2 7 (STOP) Servo OFF 3 6 (PLAY/PAUSE) Spindle servo ON, Tracking servo ON/OFF 4 ¶ (RECORD) Starts the automatic adjustment of servo adjustment ("FEOS" is displayed.) 6 ¡ (F SCAN) Move the pickup to outer periphery of the disc 7 1 (R SCAN) Move the pickup to inner periphery of the disc 8 4 ¢ (JOG ±) Adjustment value setting 9 ENTER Adjustment data register 0 FINALIZE Focus servo ON - ERASE Disc specification switch Continue pressing it more than three seconds and initialize the adjustment data. ~ SYNCHRO Execute the average adjustment ! AUTO/MANUAL Servo adjustment mode feed Key No. Assignment Key Contents of Movement 1 0 (OPEN/CLOSE) Tray Open/Close 2 7 (STOP) LD power adjustment end Turn off the LD and disc selection set to CD. 3 6 (PLAY/PAUSE) Store the power adjustment value to the EEPROM and shift to the next power adjustment. 4 ¶ (RECORD) LD POWER adjustment standby Switch the setting of 4•¢ key during adjustment. (coarse adjustment j fine adjustment : default is the coarse adjustment) 5 • (REC MUTE) Starts the LD POWER adjustment (from 0) (CD: Playback power, CD-R/RW: Record power) 6 ¡ (F SCAN) Move the pickup to outer periphery of the disc 7 1 (R SCAN) Move the pickup to inner periphery of the disc 8 4 ¢ (JOG ±) Adjustment value setting 9 ENTER Adjustment data register - ERASE Disc specification switch = TIME Adjustment from the adjustment result stored in the EEPROM at adjustment standby. During adjustment, shift to the next power adjustmnet not to store the current power adjustment value in the EEPROM. ◊ÛB->?/ COMPACT DISC DIGITAL RECORDER MONITOR DIGITAL REC LEVEL ANALOG REC LEVEL INPUT SELECTOR AUTO MANUAL DISPLAY/ CHARA MENU/ DELETE TRACK NO. WRITE TIME FINALIZE ERASE SCROLL NAME SYNCHRO PUSH ENTER R L ANALOG REC BALANCE Legato Link Conversion CD TEXT ! Adjustment mode switch 7 3 6 2 ~ = 1 4 5 89 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 54 PDR-609 [Procedure] 1. Enter the Test mode. 2. Press the INPUT SELECTOR key so that "ANALOG" appears on the FL display. 3. Press the ERASE key so that "CD" appears on the FL display. 4. Move the pickup to the position where the power is easy to measure by pressing the SCAN key. ( 1��¡ ) 5. Press the RECORD and REC MUTE key in order, and light the LD. 6. Turn the JOG key to adjust the power. Switch the coarse adjustment and the fine adjustment by pressing the RECORD key, and adjust it. (initial state is the coarse adjustment.) 7. Press the ENTER key to register the adjustment if the power became the adjustment value. 8. Press the STOP key to goes out the LD, and adjustment is completed. 6.6 LD POWER ADJUSTMENT 6.6.1 Playback Power Adjustment [Procedure] 1. Enter the Test mode. 2. Press the INPUT SELECTOR key so that "ANALOG" appears on the FL display. 3. Press the ERASE key so that "CD-R" appears on the FL display. 4. Move the pickup to the position where the power is easy to measure by pressing the SCAN key. ( 1��¡ ) 5. Press the RECORD and REC MUTE key in order, and light the LD. 6. Turn the JOG key to adjust the power. Switch the coarse adjustment and the fine adjustment by pressing the RECORD key, and adjust it. (initial state is the coarse adjustment.) 7. Press the PLAY/PAUSE key to register the adjustment if the power became the adjustment value. (assume the power when it was decided by A value) When it is registered, shift to the Overdrive power adjustment automatically. 8. Turn the JOG key to adjust the power. Switch the coarse adjustment and the fine adjustment by pressing the RECORD key, and adjust it. (initial state is the coarse adjustment.) 9. Press the ENTER key to register the adjustment if the power became the adjustment value. 10. Press the STOP key to goes out the LD, and adjustment is completed. 6.6.2 CD-R Record Power Adjustment 0.9 mW ± 0.05 mW Optimizing playback power of laser diode. Incapable of disc discrimination, playback, or track searches. Or track jumping. Pickup objective lens Test Point Adjustment Value Symptom when Out of Adjustment Purpose Adjustment method FL Indication R REC : 4.3 mW ± 0.1 mW (= A value) ; R Over Drive : A value + 0.1mW ± 0.01 mW Pickup objective lens Optimizing CD-R recording power of laser diode. Incapable of CD-R recording, self-pre recorded CD-R disc playback. Sound pauses, track jumping, or bad RF wave shape (though no failure in playing CD). Test Point Adjustment Value Purpose Symptom when Out of Adjustment Adjustment method FL Indication DANGER – LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. DANGER – LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 55 PDR-609 [Procedure] 1. Enter the Test mode. 2. Press the INPUT SELECTOR key so that "ANALOG" appears on the FL display. 3. Press the ERASE key so that "CD-RW" appears on the FL display. 4. Move the pickup to the position where the power is easy to measure by pressing the SCAN key. ( 1��¡ ) 5. Press the RECORD and REC MUTE key in order, and light the LD. 6. Turn the JOG key to adjust the power. Switch the coarse adjustment and the fine adjustment by pressing the RECORD key, and adjust it. (initial state is the coarse adjustment.) 7. Press the PLAY/PAUSE key to register the adjustment if the power became the adjustment value. When it is registered, shift to the CD-RW Record Power Adjustment automatically. Note: In the CD-RW Bias Power Adjustment, in the case that the power is over 2.3 mW when the LD lighted, do not need to perform the Bias Power Adjustment. Set adjustment value of the CD-RW record power to + 0.9mW ± 0.05mW against the power in LD lighting then. 8. Turn the JOG key to adjust the power. Switch the coarse adjustment and the fine adjustment by pressing the RECORD key, and adjust it. (initial state is the coarse adjustment.) 9. Press the PLAY/PAUSE key to register the adjustment if the power became the adjustment value. When it is registered, shift to the CD-RW Erase Power Adjustment automatically. 10.Turn the JOG key to adjust the power. Switch the coarse adjustment and the fine adjustment by pressing the RECORD key, and adjust it. (initial state is the coarse adjustment.) 11. Press the ENTER key to register the adjustment if the power became the adjustment value. 12. Press the STOP key to goes out the LD, and adjustment is completed. 6.6.3 CD-RW Record Power Adjustment RW Bias : 2.3 mW ± 0.05 mW, RW Rec : 3.2 mW ± 0.05 mW, RW Erase : 5.2 mW ± 0.1 mW Pickup objective lens Optimizing CD-RW recording power of laser diode. Incapable of CD-RW recording, self-pre recorded CD-RW disc playback. Sound pauses, track jumping, or bad RF wave shape (though no failure in playing CD). Test Point Adjustment Value Purpose Symptom when Out of Adjustment Adjustment method FL Indication Cautions: (1) All the reading values of power meter of this adjustment are values with an average. (2) How to confirm the adjustment value: When enter the power adjustment mode, enter it by pressing the RECORD and TIME keys in order. Furthermore, can confirm the adjustment value of each power stored in EEPROM by switching the TIME key. However, RW cannot see all adjustment results. Use DAC the same as erase power in the Bias Power Adjustment, and perform the adjustment of record power while outputting the setting value of erase power decided in the Bias Power Adjustment. And perform the Erase Power Adjustment while outputting the setting value of the record power. Therefore, the value of Bias Power Adjustment does not remain after adjustment of the erase power. (as for the displayed adjustment value, erase power is the same as bias power.) It is only erase power that can confirm the adjustment result with the power meter among power of RW. As for the value of Record Power Adjustment, only setting numeric value is readable, but output power becomes the same as the erase power. Bias power cannot confirm the setting value, too. Be not used during actual record operations either. DANGER – LASER RADIATION WHEN OPEN. AVOID DIRECT EXPOSURE TO BEAM. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 56 PDR-609 6.7 SERVO ADJUSTMENT 6.7.1 Preparations 1. Enter the TEST mode. 2. Press the INPUT SELECTOR key so that "OPTICAL" appears on the FL display. 3. Press the ERASE key more than three seconds to initialize it. 4. Press the SYNCHRO key to perform the average process. � \ "OPTICAL" disappears on the FL display when completed. MANUAL ADJUSTMENT [Procedure] 1. Monitor the FOCUS ERROR waveform with VC. 2. Adjust the JOG key so that FE offset becomes zero. 3. Press the ENTER key to register the adjustment. 6.7.2 Focus Offset Adjustment 0 mV ± 30 mV Optimizing DC offset voltage of focus-error amplifier. Focus-in does not function, or bad RF wave shape. CN102-pin 8 (Focus err) Test Point Adjustment Value Purpose Symptom when Out of Adjustment Adjustment method FL Indication CN102 FE VC 8 6 10: 1 prove Oscilloscope [Procedure] 1. Press the AUTO/MANUAL key and shift to the SRFO Offset Adjustment. 2. Monitor the RFDC waveform with VC. 2. Adjust the JOG key so that RFDC offset becomes zero. 3. Press the ENTER key to register the adjustment. 6.7.3 SRFO Offset Adjustment 0 mV ± 30 mV CN102-pin 2 (RF) Test Point Adjustment Value Optimizing DC offset voltage of RFDC output circuit when recording. Recording does not function. Purpose Symptom when Out of Adjustment Adjustment method FL Indication CN102 RF VC 2 6 10: 1 prove Oscilloscope www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 57 PDR-609 [Procedure] 1. Press the AUTO/MANUAL key and shift to the RFOM Offset Adjustment. 2. Monitor the RFDC waveform with VC. 2. Adjust the JOG key so that RFDC offset becomes zero. 3. Press the ENTER key to register the adjustment. 6.7.4 RFOM Offset Adjustment 0 mV ± 30 mV CN102-pin 2 (RF) Test Point Adjustment Value Optimizing DC offset voltage of RFDC output circuit when playing back. Focus-in does not function, incapable of searching, or track jumping. Purpose Symptom when Out of Adjustment Adjustment method FL Indication CN102 RF VC 2 6 10: 1 prove Oscilloscope [Procedure] 1. Press the AUTO/MANUAL key and shift to the MPP Offset Adjustment. 2. Monitor the MPP waveform with VC. 2. Adjust the JOG key so that MPP offset becomes zero. 3. Press the ENTER key to register the adjustment. 6.7.5 MPP Offset Adjustment 0 mV ± 50 mV CN102-pin 4 (MPP) Test Point Adjustment Value Playback does not function, incapable of searching, or track jumping. Optimizing DC offset voltage of main signal output circuit. Purpose Symptom when Out of Adjustment Adjustment method FL Indication CN102 MPP VC 4 6 10: 1 prove Oscilloscope www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 58 PDR-609 [Procedure] 1. Press the AUTO/MANUAL key and shift to the SPP Offset Adjustment. 2. Monitor the MPX waveform with VC. 2. Adjust the JOG key so that SPP offset becomes zero. 3. Press the ENTER key to register the adjustment. 6.7.6 SPP Offset Adjustment 0 mV ± 50 mV CN102-pin 3 (MPX) Test Point Adjustment Value Optimizing DC offset voltage of sub-signal output circuit. Playback does not function, incapable of searching, or track jumping. Purpose Symptom when Out of Adjustment Adjustment method FL Indication CN102 MPX VC 3 6 10: 1 prove Oscilloscope [Procedure] 1. Press the AUTO/MANUAL key and shift to the Tracking Gain (MS MIX) Adjustment. 2. Move the Pickup to center of the disc by pressing the SCAN key. ( 1��¡ ) 3. Monitor the MPX signal and set a CD disc. 4. Press the FINALIZE key to FOCUS IN. 5. Press the PLAY/PAUSE key to turn the SPINDLE. (CAV) 6. Adjust the JOG key so that MPX waveform (MPP+SPP) becomes minimum. 7. Press the ENTER key to register the adjustment. 8. Press the STOP key to stop the disc rotation. 6.7.7 Tracking Gain adjustment Minimize (MPP+SPP) CN102-pin 3 (MPX) Test Point Adjustment Value Matching gains of pickup main signal output and sub-signal output. Playback does not function, or incapable of searching. Purpose Symptom when Out of Adjustment Adjustment method FL Indication CN102 MPX VC 3 6 10: 1 prove Oscilloscope 39kΩ 0.001µF www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 59 PDR-609 [Procedure] 1. Press the AUTO/MANUAL key and shift to the MPP Offset Readjustment. (Press the AUTO/MANUAL key several times to appear the right indication.) 2. Monitor the TE waveform with VC. Be careful with monitoring TE waveform instead of MPP waveform in the readjustment ! 3. Adjust the JOG key so that TE offset becomes zero. 4. Press the ENTER key to register the adjustment. 6.7.8 MPP Offset Readjustment 0 mV ± 50 mV CN102-pin 5 (Tracking err) Test Point Adjustment Value Optimizing DC offset voltage of tracking-error output circuit. Playback does not function, incapable of searching, or track jumping. Purpose Symptom when Out of Adjustment Adjustment method FL Indication CN102 TE VC 5 6 10: 1 prove Oscilloscope www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 60 PDR-609 [Procedure] 1. Press the AUTO/MANUAL key and shift to the Focus Bias Adjustment. 2. Press the SYNCHRO key to perform the average process. \ "OPTICAL" disappears on the FL display when completed. 3. Move the Pickup to center of the disc by pressing the SCAN key. ( 1��¡ ) 4. Monitor the jitter value and set a CD disc. (use the jitter meter) 5. Press the FINALIZE key to FOCUS IN. 6. Press the PLAY/PAUSE key to turn the SPINDLE. (CAV) 7. Press the PLAY/PAUSE key to TRACKING ON. (EFM CLV) 8. Adjust the JOG key so that jitter value becomes minimum. 9. Press the ENTER key to register the adjustment. \ Shift to the RFDC Level Adjustment automatically. 10. Adjustment is completed automatically. \Each display the reason that became abnormal when adjustment was not completed normally. When did not converge in limit of adjustment possibility (when it became the lowest level) When failed in writing to the EEPROM 11. Press the STOP key to stop the unit. Caution: In this adjustment, shift to the RFDC Adjustment when pressing the ENTER key before step 9, and there is it when completed in normal on the indication. However, must not omit operation of steps 7 from 5 because RFDC is not adjusted to normal when pressing the ENTER key with the state that steps 7 from 5 are not executed. • The arbitrary value that "∗ ∗" modified it by adjustment. • "?" is not displayed in the point that selected an item with the AUTO/MANUAL key, and blink when changes setting value by the input of the JOG key. Press the ENTER key to register the setting value, and disappear the FL indication that the setting value is stored in the EEPROM by normal. 6.7.9 Focus Bias Adjustment Minimize jitter value CN102-pin 2 (RF) Test Point Adjustment Value Optimizing DC offset voltage of focus servo loop circuit including pickup. Focus-in does not function, sound pauses, bad RF wave shape, or incapable to playback some discs. Purpose Symptom when Out of Adjustment Adjustment method FL Indication CN102 RF VC 2 6 10: 1 prove Oscilloscope www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 61 PDR-609 AUTOMATIC ADJUSTMENT [Procedure] 1. Press the INPUT SELECTOR key so that "OPTICAL" appears on the FL display. \ If it was not displayed the Focus Offset Adjustment, press the AUTO/MANUAL key and shift to the Focus Offset Adjustment. 2. Monitor the MPX signal with VC and set a CD disc. 6.7.10 Preparation CD test disc (STD-903) CN102-pin 3 (MPX) Test Point Discs to be Used Method FL Indication CN102 MPX VC 3 6 10: 1 prove Oscilloscope [Procedure] 1. Press the RECORD key to start the automatic adjustment. \ Execute it from "6.7.1 preparations" to "6.7.6 SPP Offset Adjustment" of the Manual Adjustment automatically. And stop by the state that selected an item of next "6.6.7 Tracking Gain Adjustment" once. 6.7.11 Automatic Adjustment Start Method FL Indication [Procedure] 1. Move the Pickup to center of the disc by pressing the SCAN key. ( 1��¡ ) 2. Monitor the MPX signal with VC and set a CD disc. 3. Press the FINALIZE key to FOCUS IN. 4. Press the PLAY/PAUSE key to turn the SPINDLE. (CAV) 5. Adjust the JOG key so that MPX waveform (MPP+SPP) becomes minimum. 6. Press the ENTER key to register the adjustment. \ Stop the disc rotation and Excute "6.7.8 MPP Offset Readjustment" automatically. And select an item of next "6.6.9 Focus Bias Adjustment", and stop with the state completed to average processing. 6.7.12 Tracking Gain Adjustment Minimize (MPP + SPP) CN102-pin 3 (MPX) Test Point Adjustment Value Matching gains of pickup main signal output and sub-signal output. Playback does not function, or incapable of searching. Purpose Symptom when Out of Adjustment Adjustment method FL Indication CN102 MPX VC 3 6 10: 1 prove Oscilloscope 39kΩ 0.001µF www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 62 PDR-609 [Procedure] 1. Move the Pickup to center of the disc by pressing the SCAN key. ( 1��¡ ) 2. Monitor the jitter value and set a CD disc. (use the jitter meter) 3. Press the FINALIZE key to FOCUS IN. 4. Press the PLAY/PAUSE key to turn the SPINDLE. (CAV) 5. Press the PLAY/PAUSE key to TRACKING ON. (EFM CLV) 6. Adjust the JOG key so that jitter value becomes minimum. 7. Press the ENTER key to register the adjustment. \ Shift to the RFDC Level Adjustment automatically. 8. Adjustment is completed automatically. \ Each display the reason that became abnormal when adjustment was not completed normally. When did not converge in limit of adjustment possibility (when it became the lowest level) When failed in writing to the EEPROM 9. Press the STOP key to stop the operation. Caution: In this adjustment, shift to the RFDC Adjustment when pressing the ENTER key before step 7, and there is it when completed in normal on the indication. However, must not omit operation of steps 5 from 3 because RFDC is not adjusted to normal when pressing the ENTER key with the state that steps 5 from 3 are not executed. How to execute the automatic adjustment once again after the automatic adjustment is completed: 1. Press the STOP key to stop the disc rotation. (servo OFF) 2. Press the AUTO/MANUAL key and shift to the Focus Offset adjustment. 3. Press the RECORD key to start the automatic adjustment. Adjust from "6.7.11 automatic Adjustment Start" to "6.7.13 Focus Bias Adjustment". Press the STOP key when stops execution of the automatic adjustment on the way and stop processing. Then return to the state of "6.6.10 Preparations" and stop the operation. 6.7.13 Focus Bias Adjustment Minimize jitter value CN102-pin 2 (RF) Test Point Adjustment Value Focus-in does not function, sound pauses, bad RF wave shape, or incapable to playback some discs. Optimizing DC offset voltage of focus servo loop circuit including pickup. Purpose Symptom when Out of Adjustment Adjustment method FL Indication CN102 RF VC 2 6 10: 1 prove Oscilloscope www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 63 PDR-609 Disc required: CD-R disc * [STD-R07(PVC:RDD-74B,RDD-74BJ)] [STD-R08(PVC:RDD-74,RDD-74U)] or equivalent CD-RW disc * [STD-R11(PVC:RDW-74,RDW-74J)] or equivalent [Inspection items] 1. Recording-playback jitter Method: Measure RF signal (CN102-pin2) by Jitter Meter (Trailing edge). Specification: 35nS or below. 2. Recording-playback block error Method: While pushing "MENU/DELETE" key, press "MONITOR" key. Display: appears in about 4 sec like C1 * * * * * Specification: 65 pieces or less (Press "STOP" key to reset display) 3. Recording-playback ATIP error Method: While pushing "MENU/DELETE" key, press "DISPLAY/CHARA" key. Display: appears in about 10 sec like ATIP * * * * * * Left 3 digit datum = Total number of errors Right 3 digit datum = Maximum continuous error number (Specification item) Specification: Max continuous error (Right side datum) must be 7 pieces or less. (Press "STOP" key to reset display) [Warning] Scratch, dust, fingerprint, etc. on recording disc may cause deterioration of performance. Be careful no to be occurred. When CD-RW disc is used for measurement, do not use the same position at more than 100 times. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 64 PDR-609 7. GENERAL INFORMATION 7.1 DIAGNOSIS 7.1.1 ERROR CODE Error Code Display for Service The PDR-609 can display the error codes for service. When the STOP key is held down for about 10 seconds in stop state in Normal mode, an FL display as shown below is obtained. Right 2 FL digits : Error code for service The error code for service is displayed as a number (ERROR NUMBER), which follows a message "CHECK DISC" or "CHECK." For details, see the table below. Display Error code table for service Error code Number(2 digits) 999999 ∗∗ Code Symptom Contents of Error Possible Cause Checkpoints L∗ The unit stops during the tray open/close operation. (CHECK display) Improper loading • Defective tray position sensor • Defective loading motor • Improper soldering • Pattern short • Improper power supply IC451 (BA5810FP) E∗ The unit stops when PLAY or REC/PAUSE starts. (CHECK display) Defective slider • The pickup cannot be returned to the specified position. • Disconnected flexible cable • Defective drive circuit • Abnormal power supply • Abnormal TOC position switch • Improper soldering S601 (PSG1014) IC451 (BA5810FP) IC401 (CXD2585Q) P∗ The unit does not read the inserted disc, and stops. (CHECK DISC display) Defect in spindle • Disc upside-down. • Dirty or cracked disc • Abnormal disc rotation • No signal obtained from the disc C∗ The unit stops before it enters REC/PAUSE mode. Defects related to the recording laser power • Dirty or cracked disc • The optimum recording power cannot be obtained. • Trouble in RF detection. • Defective laser diode • Trouble in RF detection • Defective RFT RFB circuit • Recording power is not sufficient. • Improper soldering, pattern short • Trouble with power supply • Unable to read ATIP or subcode IC201 (PA9007A) IC101 (AK8567) IC308 (TC7S14F) F∗ The unit stops during playback or recording. Defective pickup • Unable to focus because of dirt or crack on the inserted disc. • Unable to output the proper laser power • Defective laser diode • Defective focus drive circuits • Defective pickup • Improper soldering • Pattern short • Trouble of power supply IC451 (BA5810FP) IC401 (CXD2585Q) A∗ The unit stops in a recording-related operation, displaying "CHECK DISC." If any hardware trouble occurs before displaying A∗ or d∗, the unit stops displaying a code other than these codes. Therefore, these service codes are generated only for troubles with the disc. d∗ The unit stops in a recording related operation, displaying "CHECK DISC." The unit does not read the inserted disc, and stops. No. Mechanism Mode No. Mechanism Mode No. Mechanism Mode 0 PLAY 5 SETUP A REC 1 OPEN 6 TOC READ B TOC REC 2 STOP 7 − C OPC 3 − 8 SEARCH D TOC CHECK 4 − 9 REC/PAUSE E PMA, ACTUAL PAUSE REC The indication for * shows themechanism mode listed below. • Defective spindle motor • Defective spindle drive circuit • Abnormal FG signals • Defective WBL circuit • Defective decoder circuit • Unable to read ATIP or subcode • High error rate PC651 (NJL5809K-F1) IC451 (BA5810FP) IC401 (CXD2585Q) • Unable to focus Stop during recording • The unit stops, being obstructed by a dirt or a crack on the disc. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 65 PDR-609 Error code table for service Code Generation Condition L∗ In the tray opening procedure, if opening action is not completed within 4.5 sec., the procedure moves to closing action. Afterwards if this closing action is not completed within 4.5 sec., the procedure recalls opening action again. This recalled opening action is not also completed within 4.5 sec., the operation halts. In the tray closing procedure, if closing action is not completed within 4.5 sec., the procedure moves to opening action. Afterwards if this opening action is not completed within 4.5 sec., the operation halts. E∗ (1) When the slider moves in REV direction, and if TOC position SW does not become "H" within 3.4 sec., the operation halts. (2) After (1) is completed normally and then the slider moves in the FWD direction, and if TOC position SW does not become "L" within 300 msec., the operation halts. (3) After (2) is completed normally and then the slider moves in the REV direction, and if TOC position SW does not become "H" within 300 msec., the operation halts. P∗ When Q data is not read in 1 sec. and ATIP data is not read in 1 sec. ,the system tries to read them for 3 times. And when even then both Q data and ATIP data are not read, the operation halts, etc. C∗ When reading PCA area, searching to playback starting position is failed, then even this is tried twice and the search is not completed, the operation halts. When writing PCA area, the rotation does not reach to the required speed at writing position, so that writing is not possible to start. Or searching to writing starting position is failed and retried for 19 times, as a result that both are incomplete, then the operation halts. F∗ Once disc discrimination is completed, and focus-in action is failed, then the operation halts. A∗ If the pick-up jump occurs during recording, and not recovered, then the operation halts. If ATIP data is not to be read for 4 sec. during recording, then the operation halts. d∗ If PMA writing is not completed within 60 sec., then the operation halts. If reading of TOC and PMA is failed, or missing information is observed in read data, the error occurs. When to start recording and RF signal exists instead at the end edge boundary of disc, the error occurs. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 66 PDR-609 7.1.2 TROUBLE SHOOTING Power isn't turn on. FL display isn't light up. FL display is abnormal. START OK Is the FL display light ? Is the FL display normal ? Yes Yes No No POWER ON • FU1 fuse it. • IC02 and IC03 (micro-fuse) fuses it. • IC701 (Mode Controller) breaks. Check the connection of PCBs. • Between POWER SUPPLY assy and AUDIO assy • Between POWER SUPPLY assy and CD-R CORE assy FL display is dark or flickered. "check" is displayed in the FL display. Press the STOP button for 20 seconds. Refer to section "7.1.1 ERROR CODE". Exchange of POWER SUPPLAY assy. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 67 PDR-609 IC701(PDC066) 12pin: 2V or less No No Yes model check IC701(PDC066) 94 pin: 609/ System IC701(PDC066) 92 pin: Legato IC701(PDC066) 91 pin: High bit RESET It is an adjustment mode by 3.5V or more. The backup data is read from EEPROM (Input selector and digital Volume etc.) "POWER ON " display Reset release of mechanism control microcomputer (88 pin: "H") Mechanism communication Initialization of AD/DA Converter Mechanism communication beginning Setting of audio format Mechanism communication Input selection setting Key reception • EEPROM communication IC7502(PDC066) 98 pin: EEP DATA IC7502(PDC066) 100 pin: EEP CLOCK • Mechanism communication IC701(PDC066) 7 pin: MACK (Output) IC701(PDC066) 28 pin: MREQ (Input) IC701(PDC066) 95 pin: MSI (Output) IC701(PDC066) 96 pin: MSO (Input) IC701(PDC066) 97 pin: MSCK (Input) Operation mode usually Terminal TEST check IC701(PDC066) 12pin: 3.5V Yes The unit checker mode One second later MAIN LOOP At the operation usually Power ON Sequence www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 68 PDR-609 7.1.3 ERROR MEESAGE "CHECK TEMP" 7.1.4 CD-R DISC MANUFACTURER CODE If recording is operated on PDR-609 at high or low temperature atmosphere, a message "CHECK TEMP" is displayed the operation halts. This message is displayed to indicate clearly the problem that would probably happen to recording and playback operation if the product is placed on a heating object like an amplifier or in a closed space like a rack in which heating object such as an amplifier causes utmost high temperature, and then if the product is moved into different atmosphere then the problem disappears. The temperature sensor which is placed inside of the product becomes +70Åé or higher or -15Åé or lower, the message is displayed. Once this is displayed, all the actions stop. In addition, the product itself has its own temperature rise, outside product threshold temperature would be a little lower. And these temperatures are not the specification values that guarantee the operation. PDR-609 has a function to investigate "Manufacturer Code" of CD-R disc. By referring "Lead-in Start Time", which is displayed when the following procedure is performed, to the following table the manufacture becomes clear, judgement whether this is a checked disc or not becomes possible. Remind that in case of CD-R discs label indication is sometimes different from manufacturer's name. By this operation you can announce more exact unchecked disc to your customer. It is worth using. *Operation procedure (1) Insert the disc to be investigate the manufacture. (2) While pushing "MENU/DELETE" key, press "INPUT SELECTOR" key. (3) Check that DISPLAY indicates "PEC*********" (RID). (4) Press "INPUT SELECTOR" key for 14 times. (5) Check that DISPLAY indicates "LIA 97:**:**" (6) Refer this value to the following table. (7) Press "STOP" key to end Note: • The above-mentioned operation confirmation media are done the media change after the product is designed, and when a constant performance cannot be maintained, become outside the support. • Manufacturer Code table [ Operation confirmation media ] r e k a m a i d e M , 4 7 e p y t s e t u n i m 1 2 , 0 8 3 6 e p y t s e t u n i m 8 1 , e p yt s e t u ni m 0 8 : n oit a r o p r o C K D T 4 0 - 0 0 : 5 1 : 7 9 - e p yt s e t u ni m 0 8 : . o C k e ti R 9 1 - 0 1 : 5 1 : 7 9 - e p yt s e t u ni m 0 8 : n oit a r o p r o C la ci m e h C ih sib u sti M 4 2 - 0 2 : 5 1 : 7 9 - d e ti m iL y n a p m o C n e d u Y o yia T 4 0 - 0 0 : 4 2 : 7 9 4 0 - 0 0 : 6 4 : 7 9 n oit a r o p r o C Y N O S 4 1 - 0 1 : 4 2 : 7 9 - d t L ,lle x a M ih c a ti H 4 2 - 0 2 : 5 2 : 7 9 - d t L ,. o C m li F o t o h P IJ U F 4 4 - 0 4 : 6 2 : 7 9 - n oit a r o p r o C o e di V r e e n oi P 4 3 - 0 3 : 7 2 : 7 9 4 3 - 0 3 : 8 4 : 7 9 d e ti m iL n a p a J k a d o K 9 4 - 5 4 : 7 2 : 7 9 9 1 - 5 1 : 8 4 : 7 9 .c n I ,sla ci m e h C iu sti M 9 5 - 5 5 : 7 2 : 7 9 9 5 - 5 5 : 8 4 : 7 9 d e ti m iL y n a p m o C h o ci R 9 6 - 5 6 : 7 2 : 7 9 - e p yt s e t u ni m 4 7 , 0 8 : . o C k e ti R 9 0 - 0 0 : 1 3 : 7 9 - e p yt st u ni m 4 7 : n oit a r o p r o C K D T 4 0 - 0 0 : 2 3 : 7 9 4 0 - 0 0 : 9 4 : 7 9 e p yt s e t u ni m 4 7 : n oit a r o p r o C la ci m e h C ih sib u sti M 4 2 - 0 2 : 4 3 : 7 9 - www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 69 PDR-609 Note: • The disc where the codes other than the above-mentioned were displayed is unconfirmed media. [ Media outside support ] r e k a m a i d e M , 4 7 e p y t s e t u n i m 1 2 , 0 8 .c n I y g olo n h c e T m a rt n a e S 9 1 - 5 1 : 2 2 : 7 9 c n I ,y g olo n h c e T aid e M r e c A 4 6 - 0 6 : 2 2 : 7 9 .c n I y g olo n h c e T S M A 4 5 - 0 5 : 5 2 : 7 9 .c n I k e tic X 4 6 - 0 6 : 5 2 : 7 9 . D T L E T P L A N O I T A N R E T N I T E N R O F 4 0 - 0 0 : 6 2 : 7 9 . n oit a r o p r o C H C E T S O P 9 1 - 0 1 : 6 2 : 7 9 .c n I a t a D d a e L 9 5 - 0 5 : 6 2 : 7 9 n oit a r o p r o C s cit e n g a M C M C 9 6 - 0 6 : 6 2 : 7 9 D T L ,. O C Y G O L O N H C E T E G A R O T S L A T I G I D 4 0 - 1 0 : 7 2 : 7 9 . d t L s m e ts y s a t a D n o m s al P 9 1 - 5 1 : 7 2 : 7 9 n oit a r o p r o C o c nir P 8 2 - 6 2 : 7 2 : 7 9 N O I T A R O P R O C E G R O T S A G I G 9 1 - 0 1 : 8 2 : 7 9 A S y r a nih c a M & s r e ts a M aid e M itlu M 4 2 - 0 2 : 8 2 : 7 9 .c n I c si D d r a u g n a V 4 1 - 0 1 : 9 2 : 7 9 .c n I y g olo n h c e T c sid o r P 9 1 - 5 1 : 2 3 : 7 9 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 70 PDR-609 CD-R CORE ASSY POWER 2 Tray Open 1 Remove a Bonnet (six screws). OPEN/ CLOSE Shield Case Unhook Tray Panel 7 2 5 4 9 ×2 9 ×2 2 3 ×2 Unhook 1 ×2 6 ×2 6 ×2 Diagnosis of CD-R CORE Assy Servo Mechanism Block Drive Gear Front 3 •Rear view CN901 CN502 CN302 CD-R CORE Assy 10 4 6 5 7 5 CD-R CORE Assy Bridge Tray 7.1.5 DISASSEMBLY CN101 CN451 CN452 Remove four connectors. CN453 8 Remove three connectors. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 71 PDR-609 1 Remove the CD-R CORE Assy. (Refer to the Disassembly of the CD-R CORE Assy and steps to of the Servo Mechanism Block. 2 Replace seven cables ( ~ ) for service and diagnose it. CD-R CORE PCB Assy CN901 ↔ CN202 (POWER SUPPLY Assy) Connector Assy (6P) : PG06KK-F50 CN452 ↔ CN601 (Servo Mechanism Assy) 8P FFC : PDD1225 1 2 3 CN502 ↔ CN401 (AUDIO Assy) 25P FFC : PDD1227 4 3 CN302 ↔ CN602 (AUDIO Assy) 9P FFC : PDD1226 5 CN101 ↔ CN1 (Pickup) 32P FFC : PDD1224 6 CN451 ↔ CN101 (LOAB Assy) Connector Assy (3P) : PG03KK-50 1 7 CD-R CORE PCB Assy ↔ Other Assys 7.1.6 DIAGNOSIS OF CD-R CORE ASSY When diagnosing the CD-R CORE Assy, use the following Flexible Cables and Connector Assys for service. • Flexible Cables and Connector Assys for service 1 6 Servo Mechanism Assy AUDIO Assy POWER SUPPLY Assy Unhook Unhook 9 8 ×2 Rear side •Bottom view 4 1 2 6 5 CN101 CN451 CN452 CN901 CN302 CN502 CN401 CN602 CN202 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 72 PDR-609 7.2 PARTS • The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams. PDC069 (CD-R CORE PCB ASSY : IC501) • Encorder IC •Pin Function (1/5) 7.2.1 IC •List of IC PDC069, PE5190, BA5810FP, AK8567, PDC066 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 73 PDR-609 •Pin Function (2/5) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 74 PDR-609 •Pin Function (3/5) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 75 PDR-609 •Pin Function (4/5) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 76 PDR-609 •Pin Function (5/5) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 77 PDR-609 PE5190A (CD-R CORE PCB ASSY : IC301) • Mechanism Control IC •Pin Function (1/2) . o N k r a M e m a N n i P O /I n o it c n u F n i P 1 L C S / 0 K L C X / 2 3 P K C S M O /I m e ts y s s u o n o r h c n y s k c olc f o t u p t u o k c olc r e fs n a rt lair e S 2 A D S / 0 O S / 3 3 P O S M O /I m e ts y s s u o n o r h c n y s k c olc f o t u p t u o a t a d r e fs n a rt lair e S 3 0 O T / 4 3 P Q E R S I t u p ni C I lo rt n o c m e ts y s e h t o t e k a h s d n a h lair e S 4 1 O T / 5 3 P K C A M O t u p t u o C I lo rt n o c m e ts y s e h t o t e k a h s d n a h lair e S 5 2 O T / 6 3 P S C E E O s s e c c a M O R P E E r o f t u p t u o elb a n E 6 3 O T / 7 3 P E C E X O ts e t r o f gij e h t g nid a e r r o f t u p t u o elb a n E 7 T E S E R X T E S E R X I )t e s e R : L ( t u p ni t e s e R 8 1 D D V 1 d d V − V 5 + 9 2 X 2 X − ) z H M 2 3 ( k c olc m e ts y s r o f t u p nila ts y r C 0 1 1 X 1 X − ) z H M 2 3 ( k c olc m e ts y s r o f t u p t u o la ts y r C 1 1 1 S S V 1 s s V − D N G 2 1 0 0 P 0 C A D C P A O C N 3 1 1 0 P 1 C A D C P A O C N 4 1 2 0 P 2 C A D C P A O C N 5 1 3 0 P 0 W P O ) 0 ( t u p t u O r o tin o m r e w o p r e s al g nid r o c e R 6 1 4 0 P 1 W P O ) 1 ( t u p t u O r o tin o m r e w o p r e s al g nid r o c e R 7 1 5 0 P 2 W P O ) 2 ( t u p t u O r o tin o m r e w o p r e s al g nid r o c e R 8 1 6 0 P 3 W P O ) 3 ( t u p t u O r o tin o m r e w o p r e s al g nid r o c e R 9 1 7 0 P 4 W P O ) 4 ( t u p t u O r o tin o m r e w o p r e s al g nid r o c e R 0 2 K A D L H / Q R F E R X / 7 6 P W R X O ) L : W R - D C , H : R - D C / D C ( t u p t u o g nis r e v e r W R - D C 1 2 Q R D L H / T I A W X / 6 6 P C E D K O L C O d n a m m o c Q 5 8 5 2 D X C r o f t u p t u o K C O L C 2 2 R W X / 5 6 P R W X O y r o m e m la n r e tx e e h t f o n oit a r e p o d a e r r o f t u p t u o la n gis e b o rt S 3 2 D R X / 4 6 P D R X O y r o m e m la n r e tx e e h t f o n oit a r e p o e tir w r o f t u p t u o la n gis e b o rt S 4 2 9 1 A / 3 6 P C E D T A L X O d n a m m o c Q 5 8 5 2 D X C f o t u p t u o h ct a L 5 2 8 1 A / 2 6 P F R K O L C O ) n oit a xif " H "( 5 8 5 2 D X C ( k c olc e s u e vis ulc x e 7 6 5 8 K A t u p t u o g nit a cin u m m o c n e h W ) K C O L C K A ( 6 2 7 1 A / 1 6 P A T A D O t u p t u o A T A D n o m m o c 7 6 5 8 K A / Q 5 8 5 2 D X C 7 2 6 1 A / 0 6 P F R T A L X O d n a m m o c 7 6 5 8 K A r o f t u p t u o H C T A L 8 2 5 1 A / 7 5 P T S R E T X O t u p t u o t e s e r n oitc e t e d e p ole v n e r o rr e g nik c a r T 9 2 4 1 A / 6 5 P V L C E O t u p t u o h cti w s e d o m V L C M F E o v r e s eld nip S 0 3 3 1 A / 5 5 P V L C O t u p t u o h cti w s e d o m V L C E L B B O W d n a V A C o v r e s eld nip S 1 3 2 1 A / 4 5 P P U N I A G O )" H " = W R - D C ( W R - D C r o f t u p t u o h cti w s t e s N I A G 2 3 1 1 A / 3 5 P N O C G A O t u p t u o h cti w s F F O / N O tiu c ric C G A n oitc a rtx e E L B B O W 3 3 0 1 A / 2 5 P C P O R D C O C P O g nin n u r R - D C r o f lo rt n o c tiu c ric C A r o f t u p t u o la n gi S 4 3 9 A / 1 5 P N O D L O )" H " = N O ( t u p t u o F F O / N O E D O I D R E S A L 5 3 8 A / 0 5 P T S R L O )t e s e R : L ( s C I m e ts y s la tigid d n a o v r e s e h t r o f t u p t u o t e s e R 6 3 7 D A / 7 4 P 7 D A O e nil s s e r d d a a t a D 7 3 6 D A / 6 4 P 6 D A 8 3 5 D A / 5 4 P 5 D A 9 3 4 D A / 4 4 P 4 D A 0 4 3 D A / 3 4 P 3 D A www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 78 PDR-609 •Pin Function (2/2) . o N k r a M e m a N n i P O /I n o it c n u F n i P 1 4 2 D A / 2 4 P 2 D A O e nil s s e r d d a a t a D 2 4 1 D A / 1 4 P 1 D A 3 4 0 D A / 0 4 P 0 D A 4 4 T U O K L C / B T S A B T S A O s s e c c a y r o m e m la n r e tx e r o f la n gis s s e r d d a r e w ol f o la n gis h ct alla n r e tx E 5 4 0 s s V D N G − D D N G 6 4 T S E T D N G − D D N G 7 4 0 M W P / 0 1 P W S D W V O ) F F O : L , N O : H ( E T I R W r o f t u p t u o h cti w s t n a ts n o c e m it r e vir d r e s a L 8 4 1 M W P / 1 1 P E D O M T O ) H : E D O M T S E T ( t u p t u o E D O M T S E T 9 4 2 K C S X / 2 K C S A / 2 1 P K L C Q O g nid a e r Q - b u s Q 5 8 5 2 D X C t u p t u o K C O L C 0 5 2 I S / 2 D X R / 3 1 P A T A D Q I g nid a e r Q - b u s Q 5 8 5 2 D X C t u p t u o A T A D 1 5 2 O S / 2 D X T / 4 1 P C . N O - 2 5 5 1 P T E D F R X I n oitc e t e d F R k c a b y alp M F E 3 5 6 1 P K O F I ) K O s u c o F : L ( t u p ni K O S U C O F 4 5 7 1 P D C X O )" L " = D C ( t u p t u o h cti w s r e h t o / D C 5 5 0 d d V 0 d d V − V 5 + 6 5 0 I N A / 0 7 P T S E T X P M ) A (I )t n e m ts ujd a m e ts y s o v r e s r o f a t a d s u oir a v ( t u p ni X P M 7 6 5 8 K A 7 5 1 I N A / 1 7 P H P F R W ) A (I ) C P O g nin n u r( t u p ni T U O A 8 5 2 I N A / 2 7 P H S F R W ) A (I ) C P O g nin n u r( t u p ni T U O B 9 5 3 I N A / 3 7 P M R E T ) A (I t u p ni r o s n e s e r u t a r e p m e T 0 6 4 I N A / 4 7 P B F R ) A (I t u p ni e p ole v n e e dis r e w ol F R k c a b y al P 1 6 5 I N A / 5 7 P T F R ) A (I t u p ni e p ole v n e tr a p r e p p u F R k c a b y al P 2 6 6 I N A / 6 7 P 1 1 M ) A (I t u p ni ) g nilp u o c t u o h ti w e p ole v n e ( tr a p r e p p u F R ( 1 R M R D C 3 6 7 I N A / 7 7 P Y A R T ) A (I )" L " = N E P O ( t u p ni N O I T I S O P G N I D A O L 4 6 d d v A d d v A − V 5 + 5 6 1 f e r v A 1 f e r v A − V 5 . 4 + 6 6 s s v A s s v A − A D N G 7 6 0 O N A 2 C D W V ) A ( O ) 0 ( t u p t u o r e w o p d r o c e r W R - D C / e vir D r e v O R - D C 8 6 1 O N A 1 A D ) A ( O ) 1 ( t u p t u o r e w o p d r o c e r W R - D C / e vir D r e v O R - D C 9 6 2 f e r v A 2 f e r V A − V 5 . 4 + 0 7 3 f e r v A 3 f e r V A − A D N G 1 7 I M N / 0 2 P L I A F P X I n oitc e t e d e r ulia f r e w o P 2 7 0 P T N I/ 1 2 P 1 T N I X I n oitc e t e d 1 C N Y S R E D O C N E M F E e h T 3 7 1 P T N I/ 2 2 P 2 T N I X I n oitc e t e d 1 C N Y S R E D O C N E M F E e h T 4 7 1 C / 2 P T N I/ 3 2 P C N Y S P I T A I n oitc e t e d C N Y S E M A L F P I T A 5 7 3 P T N I/ 4 2 P R O C S I n oitc e t e d C N Y S E M A L F R E D O C E D M F E 6 7 K C S A / 4 P T N I/ 5 2 P G F I n oitc e t e d G F E L D N I P S 7 7 5 P T N I/ 6 2 P S N E S I t u p ni S N E S 8 7 0 I S / 7 2 P I S M I t u p ni a t a d r e fs n a rt lair e s s u o n o r h c n y S 9 7 1 I S / D X R / 0 3 P K L C S O g nid a e r T U O D A E R lair e s Q 5 8 5 2 D X C Y N O S r o f t u p t u o K C O L C 0 8 1 O S / D X T / 1 3 P C . N O - ." G O L A N A " s w o h s O /I m e ti ni ) A ( : e t o N www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 79 PDR-609 BA5810FP (CD-R CORE PCB ASSY : IC451) • 5 Channel Driver IC •Pin Function •Block Diagram LEVEL SHIFT LEVEL SHIFT LEVEL SHIFT LEVEL SHIFT CH1~ CH4 MUTE POWVCC34 (CH3, CH4) POWVCC12 (CH1, CH2) 10k 10k 10k 10k 10k 10k 10k 10k 10k 10k 10k 10k 10k 10k 10k 10k 16k 16k 7.5k 7.5k 16k 16k 7.5k 7.5k PREVCC (PRE, LOADING) POWER SAVE LOADING PRE FWD REV 3 15 14 16 13 17 12 18 11 19 10 20 9 21 8 22 7 23 6 24 5 25 4 26 3 27 2 28 1 . o N e m a N ni P n oitc n u F ni P . o N e m a N ni P n oitc n u F ni P 1 D W F d r a w r o f g nid a ol r o f t u p n I 5 1 ) + ( 4 0 V 4 H C f o t u p t u o d e tr e v ni t o N 2 V E R e s r e v e r g nid a ol r o f t u p n I 6 1 )-( 4 0 V 4 H C f o t u p t u o d e tr e v n I 3 T N O C D L g nid a ol r o f la ni m r e t lo rt n o c t u p t u O 7 1 ) + ( 3 0 V 3 H C f o t u p t u o d e tr e v ni t o N 4 S P e d o m g niv a s r e w o p r o f la ni m r e t lo rt n o C 8 1 )-( 3 0 V 3 H C f o t u p t u o d e tr e v n I 5 1 N I 1 H C f o t u p n I 9 1 D N G la ni m r e t D N G e t a rts b u S 6 2 N I 2 H C f o t u p n I 0 2 4 3 C C V W O P ) 4 H C , 3 H C ( la ni m r e t t u p ni ylp p u s r e w o p 7 C C V E R P t u p ni ylp p u s r e w o p s p e ts r e w o p g nid a ol d n a e r P la ni m r e t 1 2 E T U M la ni m r e t lo rt n o c e t u m r o f t u p n I 8 2 1 C C V W O P ) 2 H C , 1 H C ( la ni m r e t t u p ni ylp p u s r e w o P 2 2 3 T U O P O P M A - P O 3 H C f o t u p t u O 9 )-( L O V g nid a ol f o t u p t u o d e tr e v n I 3 2 )-( 3 N I P O P M A - P O 3 H C f o t u p ni g nitr e v n I 0 1 ) + ( L O V g nid a ol f o t u p t u o d e tr e v ni t o N 4 2 ) + ( 3 N I P O P M A - P O 3 H C f o t u p ni g nitr e v ni t o N 1 1 )-( 2 0 V 2 H C f o t u p t u o d e tr e v n I 5 2 4 T U O P O P M A - P O 4 H C f o t u p t u O 2 1 ) + ( 2 0 V 2 H C f o t u p t u o d e tr e v ni t o N 6 2 )-( 4 N I P O P M A - P O 4 H C f o t u p ni g nitr e v n I 3 1 )-( 1 0 V 1 H C f o t u p t u o d e tr e v n I 7 2 ) + ( 4 N I P O P M A - P O 4 H C f o t u p ni g nitr e v ni t o N 4 1 ) + ( 1 0 V 1 H C f o t u p t u o d e tr e v ni t o N 8 2 S A I B r eifilp m a - s ai B f o t u p n I www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 80 PDR-609 AK8567 (CD-R CORE PCB ASSY : IC101) • RF Processor •Pin Function (1/2) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 81 PDR-609 •Pin Function (2/2) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 82 PDR-609 PDC066 (OPERATING ASSY : IC701) • System microcomputer •Pin Function (1/2) . o N e m a N ni P e p y T n oitc n u F ni P 1 L R T N O C C N Y S T X E T O d e zin o r h c n y s T X E T r o f la ni m r e t lo rt n o c p m ir c lo rt n o c e t o m e R 2 C N O - 3 1 D W / N E W O /I ) A T A D / A N E ( g nitir w h s alf r o f la ni m r e T 4 0 D W O /I ) A T A D ( g nitir w h s alf r o f la ni m r e T 5 K L C I ) K C O L C ( g nitir w h s alf r o f la ni m r e T 6 R S T X E T O d e zin o r h c n y s T X E T r o f la ni m r e t t u p t u o p m ir c lo rt n o c e t o m e R 7 Q E R S O t u p t u o Q E R g nin nig e b n oit a cin u m m o c m sin a h c e M 8 C N O - 9 C N O - 0 1 C N O - 1 1 ) L I A F P X ( T E S E R - la ni m r e t t e s e R 2 1 T S E T I ) e d o m t n e m ts ujd A : V 5 , ylla u s u : V 0 ( e d o m ts e T 3 1 C N O - 4 1 S S V - D N G 5 1 1 F C - ) z H M 0 1 ( m ulu d n e p e r u tr a p e d ci m a r e C 6 1 2 F C - m ulu d n e p e r u tr a p e d ci m a r e C 7 1 D D V - D D V 8 1 1 N I Y E K I ) n ois r e v n o c D / A ( t u p ni y e K 9 1 2 N I Y E K I ) n ois r e v n o c D / A ( t u p ni y e K 0 2 3 N I Y E K I ) n ois r e v n o c D / A ( t u p ni y e K 1 2 1 N E - R I t u p ni 1 r e d o c n e y r a t o r f o t u p nilo rt n o c e t o m e R 2 2 2 N E - R I t u p ni 2 r e d o c n e y r a t o r f o t u p nilo rt n o c e t o m e R 3 2 C N O - 4 2 C N O - 5 2 C N O - 6 2 C N O - 7 2 N I M E R I - 8 2 K C A M I m sin a h c e m m o rf la ni m r e t ts e u q e r n oit a cin u m m o C 9 2 C N O - 0 3 C N - - 1 3 I 5 4 5 1 G I 1 G - tigid D F V r o f la ni m r e t t u p t u O 6 4 3 D D V - D D V 7 4 I 0 5 1 P I 4 P O t n e m g e s D F V r o f la ni m r e t t u p t u O 1 5 P V - D N G 2 5 5 P O t n e m g e s D F V r o f la ni m r e t t u p t u O I I 1 7 4 2 Pwww. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 83 PDR-609 •Pin Function (2/2) . o N e m a N ni P e p y T n oitc n u F ni P 2 7 D D V - D D V 3 7 I 4 8 5 2 P I 6 3 P O t n e m g e s D F V r o f la ni m r e t t u p t u O 5 8 2 D E L O D E L e zila ni F 6 8 1 D E L O D E L r o tin o M 7 8 T P O X O la ni m r e t t u p t u o lo rt n o c t u p nila cit p O 8 8 T S R X O la ni m r e t t u p t u o t e s e r lo rt n o c m sin a h c e M 9 8 S S V - D N G 0 9 D D V - D D V 1 9 T I B -I H I .tib i H " H si tI" h cti w s le d o m e h t si e r e h T 2 9 O T A G E L I .k nil o t a g el " H si tI" h cti w s le d o m e h t si e r e h T 3 9 O M E D I . n oit a rts n o m e d " H si tI" h cti w s le d o m e h t r o f e d o m a si e r e h T 4 9 M E T S Y S r o 9 0 6 I ." H " d e xif si 9 0 6 - R D P h cti w s le d o M 5 9 O A T A D M O C M O . T U O A T A D n oit a cin u m m o c lo rt n o c m sin a h c e M 6 9 I A T A D M O C M I . N I A T A D n oit a cin u m m o c lo rt n o c m sin a h c e M 7 9 K L C M O C M O .k c olc n oit a cin u m m o c lo rt n o c m sin a h c e M 8 9 A D S O /I N I/ T U O a t a d M O R P E E 9 9 C N O - 0 0 1 L C S O k c olc M O R P E E www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 84 PDR-609 1 »� • FL TUBE • Grid Assignment • Pin Connection PEL1101 (OPERATING ASSY : V701) 7.2.2 DISPLAY www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 85 PDR-609 • Anode Connection www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 86 PDR-609 8. PANEL FACILITIES AND SPECIFICATIONS 8.1 PANEL FACILITIES Front Panel ◊ÛB->?/ COMPACT DISC DIGITAL MONITOR INPUT SELECTOR AUTO MANUAL DISPLAY/ CHARA TRACK NO. WRITE TIME FINALIZE ERASE SCROLL 1 2 3 4 5 11 12 13 14 15 1 POWER switch Switches power to the unit on and off. 2 SCROLL Press to scroll through long names in CD text. 3 TIME Switches the display mode (elapsed track time, remaining track time, total disc playing time, etc.) 4 DISPLAY/CHARA Press to switch between display modes (disc title, artist name, track title), and between upper- and lower-case characters while using CD text. 5 MONITOR Press to monitor the selected input and display digital source information.Indicator lights up to remind you when you are monitoring. 6 OPEN/CLOSE 0 Press to open or close the disc tray. 7 RECORD ¶ Press to enter record-pause mode for setting input levels, etc. 8 REC MUTE • Records a blank section on a disc (for space between tracks, etc.) 9 DIGITAL REC LEVEL / 4�¢ (Jog dial) Turn the jog dial to: set the digital recording level ; skip tracks; select options in the menu ; cycle through characters in CD text ; select tracks to erase . Push the jog dial to: start playback (stop mode only) ; input track numbers (during programming) ; select characters in CD text ; confirm menu settings . 10 ANALOG REC LEVEL Sets the recording level for analog-input recording. 11 ERASE Press to start erasing tracks, or to re-initialize a disc. 12 FINALIZE Press to start the disc finalization process (to make recordable CDs playable on ordinary CD players). Indicator lights up during finalization. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 87 PDR-609 13 AUTO/MANUAL Switches between automatic and manual track numbering when recording a disc. 14 INPUT SELECTOR Switches between the analog, optical digital and coaxial digital inputs. 15 Remote sensor 16 Character display 17 1 ¡ / REC BALANCE Press and hold for fast-reverse and fast-forward playback . Use when recording to set left and right input levels.Use to move cursor back and forth across character display while using CD text. 18 6 Press to play, pause, or resume playing, a disc. Also use to start recording from record-pause mode. 19 NAME Use to cycle through CD text naming options. 20 7 Press to stop playback or recording. 21 SYNCHRO Press to start recording on detection of an input signal. 22 MENU/DELETE Press to cycle through the preference menu options . Press to delete characters while editing CD text. 23 PHONES jack Plug in a pair of stereo headphones for private listening or monitor- ing. 24 LEVEL Use to adjust the phones volume. SC DIGITAL RECORDER DIGITAL REC LEVEL ANALOG REC LEVEL MENU/ DELETE NAME SYNCHRO PUSH ENTER R L ANALOG REC BALANCE Legato Link Conversion CD TEXT 6 7 8 9 10 16 17 18 19 20 21 22 23 24 www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 88 PDR-609 1 CD text indicators) DISC Lights up when disc information is displayed. TRACK Lights up when track information is displayed. ARTST Lights up when artist information is displayed. 2 TOTAL / REMAIN / TIME Indicates whether the current displayed time is elapsed, remaining, or total time for a disc or individual tracks. 3 Message/time display 4 FADER Blinks during fade in or fade out. 5 3 Lights up during playback. 8 Lights during play- or record-pause. 6 REC Lights up to when recording or record-paused. Blinking display indicates record muting. 7 CD TEXT Lights if the CD currently loaded contains CD text. 8 CD / CD-R / CD-RW Indicates the type of disc currently loaded. 9 FINALIZE Lights up if the CD-RW currently loaded has been finalized. Also blinks during automatic finalization recording . 10 SYNC / SYNC-1 Lights up when the recorder is in automatic synchro recording mode. 11 AUTO TRK Lights when automatic track numbering is on during recording. 12 MANU TRK Lights up when manual track numbering is on during recording. 13 SKIP ON Lights up to indicate that a disc contains skip IDs. When setting or clearing skip IDs, the word SKIP blinks. 14 PGM Lights up when program-play is active. 15 RDM Lights up when random-play is active. 16 RPT / RPT-1 Lights up when repeat play is active. 17 Recording level balance Displays the digital recording volume. If the balance has been changed, the indicator (L or R) of the louder channel lights up. Both indicators light when the balance is unchanged. Track numbers are displayed while using CD text. 18 OVER indicator Indicates that the input signal overloaded the disc during recording. 19 Recording level meter Displays the input level during recording, or the recorded level during playback. 20 ANALOG Lights when the analog input is selected. OPTICAL Lights when the optical digital input is selected. COAXIAL Lights when the coaxial digital input is selected. TOTAL REMAIN TIME DISC TRACK ARTST FINALIZE SYNC-1 AUTO TRK MANU TRK ANALOG OPTICAL COAXIAL 50 32 18 12 6 2 0 dB OVER TRK INDEX MIN SEC VOL FADER SKIP ON RPT-1 PGM RDM CD TEXT CD-RW 3 1 2 4 5 6 7 8 9 10 11 12 13 14 15 16 17 19 18 20 Display www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 89 PDR-609 REMOTO CONTROL UNIT ENTER CURSOR MENU/ DELETE NAME MARK SET CLEAR DISPLAY /CHARA 7 1 ¡� 8 3 4 ¢� ABC DEF GHI MNO JKL PQRS TUV WXYZ REC SYNCHRO REPEAT RANDOM NAME CLIP INPUT SELECTER FADER SKIP PLAY SKIP ID PROGRAM CHECK CLEAR AUTO/ MANUAL 1 2 3 4 5 6 7 8 9 10/0 >10 SCROLL TIME Î� •� 1 2 3 4 5 7 6 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 1 • REC MUTE Records a blank section on a disc (for space between tracks, etc.) 2 ¶ REC Press to enter record-pause mode. 3 TIME Switches the display mode (elapsed track time, remaining track time, total disc playing time, etc.) 4 DISPLAY/CHARA Press to switch between display modes (disc title, artist name, track title), and between upper- and lower-case characters while using CD text . 5 SCROLL Press to scroll through long names in CD text. 6 MARK / 10/0 Press to choose symbol characters when using CD text. As a numeric key, this represents zero. 7 MENU/DELETE Press to cycle through the preference menu options. Press to delete characters while editing CD text. 8 4 Press to skip backward tracks. Also performs those operations assigned to turning the jog dial . 9 Playback control / ENTER 3 Press to play, or resume playing, a disc. 1 and ¡Press and hold for fast-reverse and fast-forward playback, and to move cursor position using CD text. 7 Press to stop playback or recording. ENTER Confirm playback, recording, menu settings, and characters in CD text. 10 ø Press to skip backward index points. 11 RANDOM Press to start random playback. 12 REPEAT Use to set the repeat mode (current track, disc, or repeat off). 13 PROGRAM Use to program the playback order of tracks on a disc. 14 FADER Press to fade in or fade out during playback or recording. 15 SKIP PLAY Press to switch skip play on and off. 16 SKIP ID SET Instructs the player to skip a particular track on playback. 17 SKIP ID CLEAR Clears the above setting. 18 SYNCHRO Press to start recording on detection of an input signal. 19 AUTO/MANUAL Switches between automatic and manual track numbering when recording a disc. 20 Number / Letter buttons Use to jump directly to track numbers for playback, selecting track numbers for editing / programming, and selecting letters when using CD text. 21 NAME Use to cycle through CD text naming options. 22 >10 Use to select track numbers over 10. 23 ¢ Press to skip forward tracks. Also performs those operations assigned to turning the jog dial . 24 Ø Press to skip forward index points. 25 NAME CLIP Press to copy the current CD text to the recorder’s memory. 26 8 Press to pause playback or recording. 27 CHECK Press repeatedly to step through the program playlist. 28 CLEAR Press to clear the last track in a programmed playlist. 29 INPUT SELECTOR Switches between the analog, optical digital and coaxial digital inputs. www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com 90 PDR-609 8.2 SPECIFICATIONS ¶ Remote control (PWW1169) ¶ dry cell batteries (size AA/R6) × 2 (VEM-013) ¶ AC Power cords (KU/CA: ADG7021) (WV: ADG7004) (WY: ADG1127) Accessories (For PDR-609/WV and WY type) 1 General Model .............................. Compact disc audio system Applicable discs ................ CDs, CD-Rs and CD-RWs Power supply.........................AC 220-240 V, 50/60 Hz Power consumption............................................. 14 W Operating temperature ....................... +5 °C to +35 °C Weight (without package)...................................3.5 kg Max. dimensions ....... 420 (W) x 295 (D) x105 (H) mm 2 Audio unit Frequency characteristics .................... 2 Hz to 20 kHz Playback S/N......................................... 112 dB (EIAJ) Playback dynamic range ......................... 98 dB (EIAJ) Playback total harmonic distortion .... 0.0017 % (EIAJ) Playback channel separation ............................. 98 dB Recording S/N .................................................... 92 dB Recording dynamic range .................................. 92 dB Recording total harmonic distortion................ 0.004 % Output voltage ........................................................ 2 V Wow-flutter .................... Less than measurement limit ((±0.001 % W.PEAK) (EIAJ)) Number of channels ......................2 channels (stereo) Digital output: Coaxial output ...................... 0.5 Vp-p ±20 % (75 Ω) Optical output –15 to –21 dBm (wavelength: 660 nm) Frequency deflection: Level 2 (standard mode) *Recording specification values are for the LINE input (analog) 3 Input jacks Optical digital input jack Coaxial digital input jack Audio LINE input jack Control IN jack 4 Output jacks Optical digital output jack Coaxial digital output jack Audio LINE output jack Control Text jack 5 Accessories • Remote control unit ............................................... 1 • Size AA/R6P dry cell batteries .............................. 2 • Audio cable ........................................................... 2 • AC power cord ...................................................... 1 • Operating Instructions ........................................... 1 NOTE : The specifications and design of this product are subject to change without notice, due to improvements. White Red ENTER CURSOR MENU/ DELETE NAME MARK SET CLEAR DISPLAY /CHARA 7 1 ¡� 8 3 4 ¢� ABC DEF GHI MNO JKL PQRS TUV WXYZ REC SYNCHRO REPEAT RANDOM NAME CLIP INPUT SELECTER FADER SKIP PLAY SKIP ID PROGRAM CHECK CLEAR AUTO/ MANUAL 1 2 3 4 5 6 7 8 9 10/0 >10 SCROLL TIME Î� •� ¶ Audio cable (PDE1249) (L=1m) www. xiaoyu163. com QQ 376315150 9 9 2 8 9 4 2 9 8 TEL 13942296513 9 9 2 8 9 4 2 9 8 0 5 1 5 1 3 6 7 3 Q Q TEL 13942296513 QQ 376315150 892498299 TEL 13942296513 QQ 376315150 892498299 http://www.xiaoyu163.com