安桥TX-SV525功放图纸
家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 It should be clear that the base of Q520 should not be more than -1 2vdc and Q518 +1 3vdc Q516 is It should be clear that the base of Q520 should not be more than -1.2vdc and Q518 +1.3vdc. Q516 is the bias and its turn on is the potential difference of RC components R540 and R538. Q518 also gets its t ll d DC i Q526 A i th t th lt lifi i ki tl th th t f controlled DC via Q526. Assuming that the voltage amplifier is working correctly, then the amount of voltage delivered at the base of Q520 and Q518 should be within the tolerance to be governed g g (controlled) by Q516. In general practice two possibilities exist in this case In general practice two possibilities exist in this case. 1. The base drive voltage coming from Voltage amplifier stage arriving at Q518 and Q520 is to high to be controlled by Q516 and its associated components. 2. Q516 and its associated switching + RC and Voltage divider R-Nets are failing. Q526, C538, D506, 2. Q516 and its associated switching RC and Voltage divider R Nets are failing. Q526, C538, D506, D504, R562, are all part of the Q516 operators service as reference control to the bias. Is the problem 1 or 2 or both? Is the problem 1 or 2 or both? 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网 家电维修资料网
版权声明
1. 本站所有素材，仅限学习交流，仅展示部分内容，如需查看完整内容，请下载原文件。
2. 会员在本站下载的所有素材，只拥有使用权，著作权归原作者所有。
3. 所有素材，未经合法授权，请勿用于商业用途，会员不得以任何形式发布、传播、复制、转售该素材，否则一律封号处理。
4. 如果素材损害你的权益请联系客服QQ：77594475 处理。