Description Page Important Safety Notice---- ------------------------------ 2 Technical Data-------------------------------------------3~5 Instalation/On Screen Display------------------------6~8 Lock/unlock,Aging,Factory mode-----------------------9 ------------------------------ Mechanical Instructions ----------------------------11~12 Color adjustment -----------------------------------------13 Warning Message ----------------------------------------14 ---------------------------------------------15 Troubleshooting ------------------------------------------16 Electrical instruction --------------------------------17~18 DDC Instructions-------------------------------------19~25 DDC DATA --------------------------------------------26~31 ISP Instructions --------------------------------------32~33 Philips Pixel Defect Policy 10 Smart Manage Horizontal frequencies 150B6: 30 - 63 kHz 170B6: 30 - 83 kHz 190B6: 30 - 83 kHz Service Service Service TABLE OF CONTENTS Published by BCU Monitors Printed in Suzhou Copyright reserved Subject to modification K Mar. 10 2005 Description Page Safety Test Requirments-------------------------------34 Wiring Diagram------------------------------------------35 Block Diagram---------------------------------------36~39 Scaler Diagram&C.B.A. ---------------------------40~51 Scaler Board C.B.A.--------------------------------52~53 Audio&Control Diagram&C.B.A.-----------------54~61 Power Diagram & C.B.A.--------------------------62~72 General product specification--------------------73~92 Exploded View------------------------------------------- 93 Spare parts list --------------------------------------94~99 Different parts list--------------------------------100~104 Repair tips ----------------------------------------105~106 Repair Flow chart--------------------------------107~109 REFER TO BACK COVER FOR IMPORTANT SAFETY GUIDELINES CAUTION: USE A SEPARATE ISOLATION TRANSFORMER FOR THIS UNIT WHEN SERVICING. ANY PERSON ATTEMPTING TO SERVICE THIS CHASSIS MUST FAMILIARIZE HIMSELF WITH THE CHASSIS AND BE AWARE OF THE NECESSARY SAFETY PRECAUTIONS TO BE USED WHEN SERVICING ELECTRONIC EQUIPMENT CONTAINING HIGH VOLTAGES. SAFETY NOTICE Chassis: SH6 GB 3138 106 10454 LCD Colour Monitor 26MF605W/17 MF605W/17 32 150B6CB/00 150B6CS/75 150B6CB/93 150B6CG/00 150B6CG/93 150B6CS/00 150B6CS/69 170B6CB/00 170B6CB/27 170B6CB/69 170B6CB/75 170B6CB/93 170B6CB/96 170B6CG/00 170B6CG/93 170B6CS/00 170B6CS/05 170B6CS/27 170B6CS/69 170B6CS/10 170B6CS/75 190B6CB/00 190B6CB/27 190B6CB/75 190B6CB/93 190B6CG/00 190B6CS/00 190B6CS/27 190B6CS/75 190B6CS/96 http://www.wjel.net Important Safety Notice 2 170B6 LCD Go to cover page Proper service and repair isimportant to the safe, reliable operation of all HPConsumer Electronics Company** Equipment. The service procedures recommended by HP and described in this service manual are effective methods of performing service operations. Some ofthese service operations require the use of tools specially designed for the purpose. The special tools should be used when and as recommended. It is important to note that this manual contains various CAUTIONS and NOTICES which should be carefully read in order to minimize the risk of personal injury to service personnel. The possibility exists that improper service methods may damage the equipment. It is also important to understand that these CAUTIONS and NOTICES ARE NOT EXHAUSTIVE. HP could not possibly know, evaluate and advise the service trade of all conceivable ways in which service might be done or of the possible hazardous consequences of each way. Consequently, HP has not undertaken any such broad evaluation. Accordingly, a servicer who uses a service procedure or tool which is not recommended by HP must first satisfy himself thoroughly that neither his safety nor the safe operation of the equipment will be jeopardized by the service method selected. * * Hereafter throughout this manual, HP Consumer Electronics Company will bereferred to as HP. Critical components having special safety characteristics are identified with a bythe Ref. No. inthe parts list and enclosed within a broken line* (where several critical components are grouped in one area) along with the safety symbol on the schematics or exploded views. Use of substitute replacement parts which do not have the same specified safety characteristics may create shock, fire, or other hazards. Under no circumstances should the original design be modified or altered without written permission from Philips. Philips assumes no liability, express or implied, arising out of any unauthorized modification of design. Servicer assumes all liability. * Broken Line WARNING Take care during handling the LCD module with backlight unit - Must mount the moduleusing mounting holes arranged infour corners. - Do not press onthe panel, edge of theframe strongly or electric shock as this will result in damage to the screen. - Do not scratch orpress on the panel withany sharp objects, such as pencil or pen asthis may result in damage to the panel. - Protect the module fromthe ESD as it maydamage the electronic circuit (C-MOS). - Make certain that treatment person s body are grounded through wrist band. - Do not leave themodule in high temperature andin areas of high humidity for a long time. - Avoid contact with water as it may ashort circuit within the module. - If the surface ofpanel become dirty, please wipe it off with a soft material. (Cleaning with a dirty or rough cloth may damage the panel.) FOR PRODUCTS CONTAINING LASER : DANGER- Invisible laser radiation when open. AVOID DIRECT EXPOSURE TO BEAM. CAUTION- Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. CAUTION- The use of optical instruments with this product will increase eye hazard. TO ENSURE THE CONTINUED RELIABILITY OF THIS PRODUCT, USE ONLY ORIGINAL MANUFACTURER'S REPLACEMENT PARTS, WHICH ARE LISTED WITH THEIR PART NUMBERS IN THE PARTS LIST SECTION OF THIS SERVICE MANUAL. http://www.wjel.net 3 Technical Data - 170B6 Go to cover page 170B6 LCD Pin Assignment Input DVI-D connector pin Red video input Green video input Blue video input GND Cable detect Red video GND Green video GND Blue video GND DDC +3.3V OR +5V GND GND Serial data line (SDA) H-sync V-sync Data clock line (SCL) 7 8 6 5 4 3 2 1 9 10 11 12 13 14 15 Pin No. Pin No. Assignment Assignment Pin No. Description 1 T.M.D.S. data2- 2 T.M.D.S. data2+ 3 T.M.D.S. data2 shield 4 No Connect 5 No Connect 6 DDC clock 7 DDC data 8 No Connect 9 T.M.D.S. data1- 10 T.M.D.S. data1+ 11 T.M.D.S. data1 shield 12 No Connect 13 No Connect 14 +5V Power 15 Ground (for +5V) - Cable detect 16 Hot plug detect 17 T.M.D.S. data0- 18 T.M.D.S. data0+ 19 T.M.D.S. data0 shield 20 No Connect 21 No Connect 22 T.M.D.S clock shield 23 T.M.D.S. clock+ 24 T.M.D.S. clock- LCD panel Type NR. : QD17EL0709 Number of Pixels. : 1280 (H) x1024 (V) Physical Size. : 358.5(w)*296.5(h)*17.5(d) mm Pixel Pitch. : 0.264 mm x 0.264 mm Color pixel arrangement. : RGB vertical stripes Support Color. : 16.2M colors Display Mode. : Normally White Backlight. : CCFL edge light system Active area. (WXH). : 337.9 x 270.3 mm (17" diagonal) Viewing Angle (CR>=10).: Vertical 125 degree, Horizontal 140 degree (Typ.) Contrast ratio. : 500:1 White luminance. : 260nits (Typ.) Horizontal scan : 30 - 83 KHz Vertical scan : 56 - 76 Hz Main Voltage : AC 90 - 135 Vrms and 170 - 264 Vrms, 50/60 2 Hz Power consumption : 45W Max. Operating < 35W (typical), Standby < 1W. DC power switch off < 1W. Power cord length : 1.5M Power cord type : 3 lead with earth plug Power indicator : LED (ON: green, Standby: amber) Auto power saving : EPA, Nutek, VESA, DPMS (for analog), DMPM (for digital according to DDWG standard for DVI rev.1.0) Display mode :Multi-modes Horizontal scanning Sync polarity :Positive or negative Scanning frequency :30K - 83 KHz Vertical scanning Sync polarity :Positive or negative Scanning frequency :56 - 76 Hz Pedestal. : Detachable Tilt angle.: -5 to 35 Swivel rotation: 125 Environmental conditions Operating Temperature Range 5�C to 40�C Humidity Range 20 % to 80% Altitude Range 0 to 12000 feet Storage Temperature Range -20�C to 60�C Humidity Range 5 % to 95% Altitude Range 0 to 30000 feet Note: recommended at 5 to 35�C, humidity less than 60%. http://www.wjel.net 4 Go to cover page 170B6 LCD Technical Data - 150B6 LCD panel Type NR. : LG panel LM150X08 Outline Dimensions : 326.5(H) * 253.5(V) *11.2(D)mm Pitch (mm) : 0.297 x 0.297 mm Color pixel arrangement : RGB stripe arrangement Display surface : Anti-glare with hard coating(3H) Number of color : 6 bits with FRC, 16M colors Backlight : CCFL edge-light system Active area (W x H) : 304.1x228.1mm(15.0" diagonal) Viewing angle (CR 10) : Vertical 100 degree, Horizontal 130 degree typical. Contrast ratio : 450 typical. Luminance of white : 250 Nits typical Type NR. : QDI panel QD15XL13 Dimensions : 326.5(H)*253.5(V)*11(D) mm Pitch ( mm ) : 0.297 x 0.297 mm Color pixel arrangement : RGB stripe arrangement Display surface : Anti-glare with hard coating(3H) Number of color : 6 bits with FRC, 16M colors Backlight : CCFL edge-light system Active area(W x H) : 304.1 x 228.1mm (15.0" Diagonal) Viewing angle(CR 10) : Vertical 100 degree, Horizontal 120 degree typical. Contrast ratio : 500 typical. Luminance of white : 250 Nits typical Viewing angle(CR 10) : Vertical 100 degree, Horizontal 120 degree typical. Contrast ratio : 500 typical. Luminance of white : 250 Nits typical Power supply Main voltage : AC 90 - 264 Vrms, 50/60�3 Hz Power consumption : 28Watts max Operating < 23W(typical) Sleeping < 1W DC power switch off < 1W Power cord length : 1.5M Power cord type : 3 lead with earth plug Power indicator : LED (on: green, sleep: amber,). Auto power saving : EPA, Nutek, VESA DPMS Horizontal scan : 30 - 63 KHz Vertical scan : 56 - 76 Hz Pin Assignment Input DVI-D connector pin Red video input Green video input Blue video input GND Cable detect Red video GND Green video GND Blue video GND DDC +3.3V OR +5V GND GND Serial data line (SDA) H-sync V-sync Data clock line (SCL) 7 8 6 5 4 3 2 1 9 10 11 12 13 14 15 Pin No. Pin No. Assignment Assignment Pin No. Description 1 T.M.D.S. data2- 2 T.M.D.S. data2+ 3 T.M.D.S. data2 shield 4 No Connect 5 No Connect 6 DDC clock 7 DDC data 8 No Connect 9 T.M.D.S. data1- 10 T.M.D.S. data1+ 11 T.M.D.S. data1 shield 12 No Connect 13 No Connect 14 +5V Power 15 Ground (for +5V) - Cable detect 16 Hot plug detect 17 T.M.D.S. data0- 18 T.M.D.S. data0+ 19 T.M.D.S. data0 shield 20 No Connect 21 No Connect 22 T.M.D.S clock shield 23 T.M.D.S. clock+ 24 T.M.D.S. clock- Environmental conditions Operating -Temperature C : 5� to 40�C -Humidity : 20% to 80 % -Altitude : 0 - 12,000 feet Storage -Temperature C : -20 to 60� -Humidity : 5% to 95% ( < 40 ) -Altitude : 30,000 feet Note: recommend at 5 to 35�C, Humidity less than 60 % http://www.wjel.net 5 Technical Data - 190B6 Go to cover page 170B6 LCD Pin Assignment Input DVI-D connector pin Red video input Green video input Blue video input GND Cable detect Red video GND Green video GND Blue video GND DDC +3.3V OR +5V GND GND Serial data line (SDA) H-sync V-sync Data clock line (SCL) 7 8 6 5 4 3 2 1 9 10 11 12 13 14 15 Pin No. Pin No. Assignment Assignment Pin No. Description 1 T.M.D.S. data2- 2 T.M.D.S. data2+ 3 T.M.D.S. data2 shield 4 No Connect 5 No Connect 6 DDC clock 7 DDC data 8 No Connect 9 T.M.D.S. data1- 10 T.M.D.S. data1+ 11 T.M.D.S. data1 shield 12 No Connect 13 No Connect 14 +5V Power 15 Ground (for +5V) - Cable detect 16 Hot plug detect 17 T.M.D.S. data0- 18 T.M.D.S. data0+ 19 T.M.D.S. data0 shield 20 No Connect 21 No Connect 22 T.M.D.S clock shield 23 T.M.D.S. clock+ 24 T.M.D.S. clock- Environmental conditions Operating Temperature Range 5�C to 40�C Humidity Range 20 % to 80% Altitude Range 0 to 12000 feet Storage Temperature Range -20�C to 60�C Humidity Range 5 % to 95% Altitude Range 0 to 30000 feet Note: recommended at 5 to 35�C, humidity less than 60%. LCD panel Type NR. : LM190E04-A4 Number of Pixels. : 1280 (H) x1024 (V) Physical Size. : 396.0(w)�324.0(h)�15.5(d) mm Pixel Pitch. : 0.294 mm x 0.294 mm Color pixel arrangement. : RGB vertical stripes Support Color. : 16.2M colors Display Mode. : Normally White Backlight. : CCFL edge light system Active area. (WXH). : 376.32 x 301.056mm (19" diagonal) Viewing Angle (CR>=10). : Vertical 140 degree, Horizontal 140 degree (Typ.) Contrast ratio. : 500:1 White luminance. : 250nits (Typ.) Type NR. : M190EN04 Number of Pixels. : 1280 (H) x1024 (V) Physical Size. : 396(w)�324(h)�18(d) mm Pixel Pitch. : 0.294 mm x 0.294 mm Color pixel arrangement. : RGB vertical stripes Support Color. : 16.2M colors Display Mode. : Normally White Backlight. : CCFL edge light system Active area. (WXH). : 376.32 x 301.06 mm (19" diagonal) Viewing Angle (CR>=10). : Vertical 135 degree, Horizontal 140 degree (Typ.) Contrast ratio. : 550:1 White luminance. : 270nits (Typ.) Horizontal scan : 30 - 83 KHz Vertical scan : 56 - 76 Hz http://www.wjel.net 6 Go to cover page Installation 170B6 LCD Front View UP and DOWN buttons are used when adjusting the OSD of your monitor. LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor. BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are pressed, the adjustment controls for the BRIGHTNESS will show up. VOLUME hotkey. When the LEFT and RIGHT arrow buttons are pressed, the adjustment controls for VOLUME will show up. OK button which when pressed will take you to the OSD controls. POWER button switches your monitor on. Automatically adjust the horizontal position, vertical position, phase and clock setting. USB plug for convenient peripheral connectors Rear View 1 Kensington anti-thief lock 2 VGA input 3 DVI-D input 4 PC audio input 5 Earphone jack 6 AC power input 7 USB upstream port 8 USB downstream port Power cord VGA signal cable EDFU pack PC audio cable (lime) Mac adaptor (optional) USB cable Accessory Pack Item Description Connecting to Your PC 1) Plug the power cord into monitor firmly. Note: If you use an Apple Macintosh, you need to connect the special Mac adapter to one end of the monitor signal cable http://www.wjel.net 7 Go to cover page 170B6 LCD Installation Cable management a) Remove the top cover of the arm box b) Put the cables inside the arm box c) Put the top cover back 2) Connect to PC (a) Turn off your computer and unplug its power cable. (b) Connect the monitor signal cable to the video connector on the back of your computer. (c) Plug the power cord of your computer and your monitor into a nearby outlet. (d) Turn on your computer and monitor. If the monitor displays an image, installation is complete. 3) USB plug (a) Connect USB upstream port on monitor and the USB port on PC with a USB cable. (b) The USB downstream port is now ready for any USB device to plug in Note: The USB plug is a pass through connection whether it can support USB 1.1 or USB 2.0 depends on your PC's specification. http://www.wjel.net 8 Go to cover page 170B6 LCD On Screen Display Description of the On Screen Display On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below : Basic and simple instruction on the control keys. In the OSD shown above users can press buttons at the front bezel of the monitor to move the cursor, to confirm the choice or change, and to adjust/select the change. The OSD Tree Main Menu Sub Menu http://www.wjel.net 9 Go to cover page 170B6 LCD Lock/Unlock,Aging,Factory Mode Front Control To Lock/Unlock OSD FUNCTION(User Mode) The OSD function can be locked by pressing"OK"button(1) for more than 10 seconds, the screen shows following windows for 4 seconds. Everytime when you press"OK" button, this message appears on the screen automatically. ATTENTION SIGNAL OSD MAIN CONTROLS LOCKED Unlock OSD function Unlocked OSD function can be released by pressing "OK" button for more than 10 seconds again. ATTENTION SIGNAL OSD MAIN CONTROLS UNLOCKED After 20 seconds, bring up: ---------- ---------- repeatly Connect Signal cable again=> go back to normal display After 20 seconds, bring up: After 20 seconds, bring up: AGING... Access Aging Mode Step 1 : D Step 2 : [Push "AUTO" & " OK " buttons at the same time and hold them]+[Press power " " button untill comes out " AGING screen"] => then release all buttons. Bring up: isconnect Interface Cable between Monitor and PC. Turn off LCD monitor.Then AGING... Access Factory Mode 1). Turn off monitor. 2). 3).Press "OK" button, wait until the OSD menu with Characters "HUDSON 170B6 V023 2004/12/06" (below OSD menu) come on the Screen of the monitor. [Push "AUTO" & "OK" buttons at the same time and hold them] +[Press "power" button untill comes out "Windows screen" ] => then release all buttons Factory Mode indicator Factory Menu Cursor can move on gray color area Hot key function: by pressing " UP " and " DOWN " key Simultaneously at User Mode (or Factory Mode) (PS: The Offset R G B function can be used on reduce or eliminate snowy noise on the background when the resolution of video signal is 1280*1024 vertical 60Hz. Slightly increase or decrease the value until snowy noise completely disappear. SUB-BRI : Brightness value range(Min Max) SUB-CON : Contrast value range(Min Mid Max) SRGB-B : Brightness of sRGB SRGB-C : Contrast of sRGB Gain-m : Minimum value of User Gain Gain-M : Maximum value of User Gain AUTO-SUB : To do Auto color function when push Menu key in white pattern IDX : Limit current of inverter SCALER : Read/Write scaler register NVRAM : Read/Write eeprom address Panel : HS, LG, AU, QDI, DEFAULT?. EXIT : Exit Factory Menu SAVE : Save the setup values of Factory Menu 7 http://www.wjel.net 10 Go to cover page 170B6 LCD Philips Pixel Defect Policy Philips' Flat Panel Monitors Pixel Defect Policy Philips strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control. However, pixel or sub pixel defects on the TFT LCD panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type. In order to qualify for repair or replacement under warranty, the number of pixel defects on a TFT LCD panel must exceed these acceptable levels. For example, no more than 0.0004% of the sub pixels on a 15" XGA monitor may be defective. Furthermore, Philips sets even higher quality standards for certain types or combinations of pixel defects that are more noticeable than others. This policy is valid worldwide. Pixels and Sub pixels A pixel, or picture element, is composed of three sub pixels in the primary colors of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors. Types of Pixel Defects Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category. Bright dot defects appear as pixels or sub pixels that are always lit or 'on'. These are the types of bright dot defects: One lit red, green or blue sub pixel Two adjacent lit sub pixels: - Red + Blue = Purple - Red + Green = Yellow - Green + Blue = Cyan (Light Blue) Three adjacent lit sub pixels (one white pixel) Black Dot Defects Black dot defects appear as pixels or sub pixels that are always dark or 'off'. These are the types of black dot defects: One dark sub pixel Two or three adjacent dark sub pixels Proximity of Pixel Defects Because pixel and sub pixels defects of the same type that are near to one another may be more , Philips also specifies tolerances for the proximity of pixel defects. Pixel Defect Tolerances In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables. Note: * 1 or 2 adjacent sub pixel defects = 1 dot defect All Philips monitors are ISO13406-2 Compliant MODEL 1 dark subpixel 2 adjacent dark subpixels 3 adjacent dark subpixels Distance between two dark dot defects* Total dark dot defects of all types BLACK DEFECTS ACCEPTABLE LEVEL 150B6 170B6 190B6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MODEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels ( one white pixel) Distance between two bright dot defects* Total bright dot defects of all types BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 150B6 170B6 190B6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 MODEL Total bright or black dot defects of all types TOTAL DOT DEFECTS ACCEPTABLE LEVEL 150B6 170B6 190B6 0 0 0 http://www.wjel.net 11 Go to cover page 170B6 LCD Mechanical Instruction Front view Back view Step 1. Remove the stand. a. Remove the hinge covers b. Remove the four screws as Fig.4 as Fig.3 Fig.3 Fig.2 Fig.1 Fig.7 Fig.8 Fig.4 Step 2: Remove the front bezel a. b. Open 2 clicks on bottom side as shown in Fig.6. c. Open 3 clicks on right and left side as shown in Fig.7 and Fig.8. d. Open 3 clicks on top side as shown in Fig.9. Remove the two screws as shown in Fig.5. Fig.5 Fig.6 Fig.9 Step 3: Remove the Back Cover Assy a. Remove 5 screws as shown in Fig.10. b. Remove the Control&Audio Board from the Back Cover Assy c. Open clicks on left and right side, Remove LCD Panel from Back Cover Assy shown in Fig. 11. as Fig.10 Fig.11 http://www.wjel.net Mechanical Instruction Go to cover page 12 170B6 LCD In warranty, it is not allowed to disassembly the LCD panel, even the backlight unit defect. Out of warranty, the replacment of backlight unit is a correct way when the defect is cused by backlight (CCFL,Lamp). Fig. 13 Fig. 14 Step 3. Remove the Scaler and Power board. a. b. Remove the 10 screws and disconnect the 3 cables as Fig. 12. c. Remove the 8 screws and disconnect the 2 cables as Fig. 11. Remove the 4 screws and disconnect the 1 cables as Fig. 13. Fig. 12 LCD Panel 1050 823827717631 TFT-LCD MOD QD170EL07 REV.09(Fig.14). http://www.wjel.net 13 Go to cover page 170B6 LCD Color Adjustment Note: after alignment, please reset OSD to user s mode for normal operation. Otherwise, the monitor won t entering power saving mode and showing full white picture all the time as no video signal supplied. To leave factory mode by restart the monitor. 5. Adjust OSD menu to lower position of screen (i.g. adjust V-position to value " 0 " at submenu of OSD Setting. 6. Setting Brightness and Contrast - Adjust Brightness to value " 100". - Adjust Contrast to value " 50" . 7. Switch light probe to Viewing position. 8. Move the Lens barrel forward or backward to get clear image 9. Switch light probe to Measuring position. It should be able to indicate Fig. 1 Fig. 2 0-CAL Fig. 3 Fig. 5 Clear image Measurement/viewing selector See Fig. 5 Fig. 7 9300� K 13. Press MENU buttons to select R G B. Increase/decrease value by press or buttons until the X, Y co-ordinates as below: X= 0.283+/- 0.020 Y= 0.297 +/-0.020 Luminance> 200 Nits 6500 �K 14. Setting X, Y value listed as below: X= 0.313 +/-0.020 Y= 0.329 +/-0.020 Luminance> 200 Nits Alignment hits: 1. R for x value, G for y value, B for Y value on the colour analyzer. 2. If the colour analyzer has been calibrated and preset colour temperature in it. Please switch to correct setting in accordance with colour settings. 15. Gray scale checking - Switch Timing/pattern generator to Pattern: 16 gray scale Timing: 640 X 480 60Hz 64KHz - Setting both Brightness 100% and Contrast to 50% (Value). - Check black and white scale are visible clearly across the screen. Note: The bright scale will be saturated, if Y is too large. The dark scale will be invisible, if Y is too small. Re-alignment or review Cover(black) White Balance Adjustment Alignment procedure 1. Turn on 170B6 LCD monitor. 2. Turn on the Timing/Pattern generator. See Fig. 1 Setting generator to provide CROSS-Hatch pattern at Resolution :1280*1024 Timing : H= 64kHz V= 60 Hz 3. Preset LCD colour Analyzer CA-110 - Remove the lens protective cover of probe CA-A30. - Set Measuring/viewing selector to Measuring position for reset analyzer. (Zero calibration) as Fig. 2 - Turn on the colour analyzer (CA-110). - Press 0-CAL button to starting reset analyzer. See Fig. 3 procedure again to correct this. Measurement viewing selector Measurement viewing selector Fig. 4 Factory Mode Indicator 4. Entering factory adjustment mode of LCD Monitor. 1). Turn off monitor. 2). 3).Press "OK" button, wait until the OSD menu with Characters "HUDSON 170B6 V023 2004/12/06" (below OSD menu) come on the Screen of the monitor(as Fig.4). [Push "AUTO" & "OK" buttons at the same time and hold them] +[Press "power" button untill comes out "Windows screen" ] => then release all buttons 10. Setting pattern to full white picture 11. Press button, then select factory mode indicator by "OK" " " button 12. Press"OK" button to bring up submenu windows as below: 7 Fig. 6 http://www.wjel.net 14 Go to cover page 170B6 LCD Warning Message Item Attention Signals Display Time Condition 1 CANNOT DISPLAY THIS VIDEO MODE, CHANGE COMPUTER DISPLAY INPUT TO 1280X1024 @ 60HZ 30 mins This warning appears when the input signal from your computer is not in a standard video mode or is out of the monitor s scanning range. After 30 mins, monitor enters sleeping mode. 2 NO VIDEO INPUT 30 mins This message appears when there is no signal input but with cable while AC or DC power on. After 30 mins, monitor enters sleeping mode. 3 CHECK CABLE CONNECTION 30 mins This message appears when a signal cable is disconnected while monitor is working. After 30 mins, monitor enters sleeping mode. 4 ENTERING SLEEP MODE 3 secs This message appears when monitor is about to enter power saving mode. 5 WAITING FOR AUTOMATIC ADJUSTMENT till auto adjustment finished This message is displayed when the auto adjustment button is pressed. It disappears when automatic adjustments are completed. 6 USE 1280X 1024 FOR BEST RESULT On top of OSD main menu The message will show up at the top of the OSD main menu in red color when the input resolution is not the 1280x1024. 7 OSD MAIN CONTROLS LOCKED 3 secs / or Till "OSD MAIN CONTROLS UNLOCKED" appear This message will appear 3 seconds to indicate the OSD MAIN CONTROLS status when to lock or un-lock it by pressing "MENU(OK) " button for more than 10 seconds while there is video input from PC. This function provides the alternative that user can lock all the OSD main control in case user don t want the FOS performance setting to be changed, for instance, during commercial exhibition. 8 OSD MAIN CONTROLS UNLOCKED 3 secs This message will appear 3 seconds to indicate the OSD MAIN CONTROLS status when to un-lock it by pressing "MENU (OK) " button for more than 10 seconds while there is video input from PC. 9 the window of "VOLUME" 60 secs This message will appear when the VOLUME button is pressed. 10 THIS IS 85HZ OVERSCAN, CHANGE COMPUTER DISPLAY INPUT TO 1280X1024@60HZ 10 mins This message will appear 5 seconds in every 60 seconds for 10 minutes when the input of PC video timing is at 85Hz mode. Remark: AUTO is still functional in this mode 11 the window of OSD "MONITOR SETUP " 60 secs This message will appear when the "OK" button is pressed. 12 the window of "BRIGHTNESS" 60 secs This message will appear when the BRIGHTNESS button is pressed. 13 "SELECTED INPUT NOT AVAILABLE" 3 secs This message will appear 3 seconds to indicate the SIGNAL SOURCE status when change the signal source but it is not found while there is video input from PC. Warning message table http://www.wjel.net 15 Go to cover page 170B6 LCD Smart Manage Introduction SmartManage Features and Benefits Philips SmartControl Philips SmartManage is an advanced solution for users, corporate/ institution IT administrator in particular, to manage their Philips monitors as part of the asset management environment. The solution includes three essential components, Philips SmartManage Administrator, and Philips SmarControl and Agent. Philips SmartManage is a solution joint developed by Philips and Altiris Inc. The Philips SmartManage is a working console for IT management to gather monitors assets information, run asset report, control assets security, monitor assets security, and issue instant messages to monitor users. Philips SmartManage includes the following major features: 1. Provides an additional security measure that helps corporate users safeguard their investment. 2. Power saving feature that reduces utility costs and manpower required to turn monitors on or off. 3. SmartControl provides an efficient means for adjusting monitor performance and settings. 4. Built-in asset reports reduce audit/maintenance manpower, cycle time and costs. A trial version of SmartManage can be downloaded from http://www.altiris.com/philips For more information of Philips SmartManage, please contact with Philips sales representatives in your country. Notes: SmartManage is a software dedicated to business environments. Personal users normally do not need to use SmartManage. The SmartControl and SmartManage Agent are deployed and installed in computers using Philips monitors. With SmartControl and SmartManage Agent, monitors and PCs can interact with the administrator's inquiries. Because SmartControl operates on individual PC, end users can also use SmartControl to adjust monitor's performance settings. 1. Requirement 1. Graphic cards with nVIDIA (TNT2, GeForce, Quadro, or newer) and ATI (Radeon or newer) graphic chipsets that support the DDC/CI interface 2.Microsoft Windows 2000 and XP operation systems. 3. Philips monitors supporting DDC/CI interface 2. Installation How to download "SmartControl Installation " file: 1. Visit http:// www.philips.com 2. Select "Your Country" 3. Click on "Support Center" 4. Click into "Monitors and PC Products" 5. Enter your model number 6. Enter "Software" page 7. Select "SmartControl Installation", and you can download SmartControl and its driver for installation. Please follow the guidance in the SmartControl installation program. 3. Accessing SmartControl 1. Right click on the desktop of your PC, and select Properties from the shortcut menu pops up. 2. Click on Settings tab, and click on Advanced button. 3. Click Philips SmartControl tab. 4. SmartControl Options 1.Display and Sound By moving the sliding bar toward left or right, users will be able to adjust brightness, contrast, audio volume (if applicable), video noise (not applicable when using DVI-D input), and color temperatures. 2.Position Users can adjust the horizontal and vertical position of the screen by moving the sliding bar left and right. This function is disabled when using DVI-D (digit) input. 3.Product Information Click Product Information in the left pane to view the product information stored in the monitor's memory. 4.General Click on General for general information including driver information, device information, and monitor control. Within monitor control, users can click on Auto Setup to achieve optimum performance or click on factory reset to reset the parameters of the monitor. Such choices are disabled when using DVI-D(digit) input. http://www.wjel.net 16 Go to cover page 170B6 LCD Troubleshooting Common Problems Having this problem Check these items No Picture (Power LED not lit) 1.Make sure the power cord is plugged into the power outlet and into the back of the monitor. 2.First, ensure that the power button on the front of the monitor is in the OFF position, then press it to the ON position. No Picture (Power LED is amber or yellow) 1.Make sure the computer is turned on. 2. Make sure the signal cable is properly connected to your computer. 3.Check to see if the monitor cable has bent pins. 4.The Energy Saving feature may be activated Screen says 1. Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick Set-Up Guide). 2.Check to see if the monitor cable has bent pins. 3. Make sure the computer is turned on. Screen says 1. Make sure the vertical sync of input signal is within the range of 56 ~ 75 Hz. 2.Change the refresh rate to 56~75Hz within 10 minutes. 3. Re-power on monitor to start over again if you failed to change the refresh rate within 10 minutes. AUTO button not working properly 1.The Auto Function is designed for use on standard Macintosh or IBM-compatible PCs running Microsoft Windows. 2. It may not work properly if using nonstandard PC or video card. 3.The AUTO adjustment does not function when digital input is used for display. Imaging Problems Display position is incorrect 1.Press the Auto button. 2. Adjust the image position using the Horizontal Position and/or Vertical Position in OSD Main Controls. Image vibrates on the screen Check that the signal cable is properly connected to the graphics board or PC. Vertical flicker appears 1. Press the Auto button. 2. Eliminate the vertical bars using the Clock Adjustment of VIDEO NOISE in OSD Main Controls. Horizontal flicker appears 1. Press the Auto button. 2. Eliminate the vertical bars using the Clock Adjustment of VIDEO NOISE in OSD Main Controls. The screen is too bright or too dark Adjust the contrast and brightness on OSD Main Controls. (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer). An after-image appears If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave an afterimage. This usually disappears after a few hours. An after-image remains after the power has been turned off. This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The after-image will disappear after a peroid of time. Green, red, blue, dark, and white dots Remains The remaining dots are normal characteristic of the liquid crystal used in today's technology. ATTENTION NO VIDEO INPUT ATTENTION THIS IS 85HZ OVERDRIVE, CHANGE COMPUTER DISPLAY INPUT TO 1280X1024@60HZ http://www.wjel.net 17 Go to cover page 170B6 LCD Electrical Instructions 1. General points 1.1 During the test and measuring, supply a distortion free AC mains voltage to the apparatus via an isolated transformer with low internal resistance. 1.2 All measurements mentioned hereafter are carried out at a normal mains voltage (90 - 132 VAC for USA version, 195 -264 VAC for EU ROPEAN version, or 90 - 264 VAC for the model with full range power supply, unless otherwise stated.) 1.3 All voltages are to be measured or applied with respect to ground, unless otherwise stated. Note: don‘t use heat sink as ground. 1.4 The test has to be done on a complete set including LCD panel after 30 minutes warm-up at least in a room with temperature of 25 +/- 5 degree C. 1.5 All values mentioned in these test instruction are only applicable of a well-aligned apparatus, with correct signal. 1.6 The letters symbols (B) and (S) placed behind the test instruction denotes (B): carried out 100% inspection at assembly line (S): carried out test by sampling 1.7 The white balance (color temperature) has to be tested in subdued lighted room. 1.8 Repetitive power on / off cycle are allowed except it should be avoided within 6 sec. 2. Input signal 2.1 Signal type 2.1.1Video signal input Signal source: pattern generator format as attachment (Table 1 to 34) Reference generator: QuantumData 802BTThe input signals can be applied in two different modes: 1). VESA Analog The video input consists of red, green, and blue signals. The video signals are analog levels, where 0V corresponds to black and 700mV is the maximum signal amplitude. Input impedance of video pins is 75 ohm +/- 1%. 2). Intel DVI Digital Input signal: Single TMDS link (Three channels: RX0-/+, RX1-/+, RX2-/+). 2.1.2 Sync signal input The capability of sync signal inputs shall include separate sync, composite sync and sync on green. Input impedance: 2k2 ohms. The signals are defined as follow: Separate sync TTL level, Positive/Negative Composite sync TTL level, Positive/Negative Sync on green H-sync TTL level, Positive/Negative Signal source: pattern generator format as attachment (Table 1 to 34) Reference generator: QuantumData 802BT 2.2 Input signal mode The maximum resolution display of this monitor is up to 1280x1024, SXGA signal input with full screen display. It shall also automatically up-scale the lower resolution video modes into 1280x1024 full screen display. The display capabilities shall include the following timing modes: (1) Preset modes (34 modes) # Resolution H-Frequency Pixel rate V-Frequency Comment 1 640X350 31.5K 25.175 70Hz IBM VGA 10h 2 720X400 31.5K 28.322 70Hz IBM VGA 3h 3 640X480 31.5K 25.175 60Hz 4 640X480 35.0K 30.24 67Hz 5 640X480 37.9K 31.5 72Hz 6 640X480 37.5K 31.501 75Hz 7 640X480 43.3K 36 85Hz 8 800X600 35.2K 36 56Hz 9 800X600 37.9K 40 60Hz 10 800X600 48.1K 50 72Hz 11 800X600 46.9K 49.498 75Hz 12 800X600 53.7K 56.251 85Hz 13 832X624 49.7K/ 57.28 75Hz MAC 14 1024X768 48.4K 65 60Hz 15 1024X768 56.5K 75 70Hz 16 1024X768 60.0K 78.75 75Hz 17 1024X768 61.1K 83.096 76Hz IBM XGA-2 18 1024X768 68.7K 94.5 85Hz 19 1152X864 54.0K 79.9 60Hz Non-VESA 20 1152X864 63.9K 94.5 70Hz Non-VESA 21 1152X864 67.5K 108 75Hz 22 1152X870 68.7K 100 75Hz MAC 23 1152X900 61.8K 92.94 66Hz SUN Mode IV 24 1152X900 71.8K 108 76Hz SUN Mode II 25 1280X960 60.0K 108 60Hz 26 1280X960 75.0K 129.895 75Hz Non-VESA 27 1280X1024 64.0K 108 60Hz 28 1280X1024 71.7K 117 67Hz SUN Mode V 29 1280X1024 76.0K 130.223 72Hz DOS/V 30 1280X1024 80.0K 135 75Hz 31 1280X1024 81.1K 135.008 76Hz SUN Mode I 32 688X556 31.3K 27 50Hz TV-PAL 33 960X720 44.76K 57.58 60Hz 34 960X720 56.4K 72.42 75Hz (2) Factory Preset modes (15 modes) http://www.wjel.net 18 Go to cover page 170B6 LCD Electrical Instructions # Resolution H-Frequency Pixel rate V-Frequency Comment 1 640X350 31.5KHz 25.175 70Hz IBM VGA 10h 2 720X400 31.5KHz 28.322 70Hz IBM VGA 3h 3 640X480 37.5KHz 31.501 75Hz 4 640X480 35.0KHz 30.24 67Hz 5 640X480 31.5KHz 25.175 60Hz 6 800X600 35.2KHz 36 56Hz 7 800X600 46.9KHz 49.498 75Hz 8 800X600 37.9KHz 40 60Hz 9 832X624 49.7KHz 57.28 75Hz MAC 10 1024X768 60.0KHz 78.75 75Hz 11 1024X768 48.4KHz 65 60Hz 12 1152X870 68.7KHz 100 75Hz MAC 13 1152X900 71.8KHz 108 76Hz SUN Mode II 14 1280X1024 64.0KHz 108 60Hz 15 1280X1024 80.0KHz 135 75Hz 2.3 Allowed 85 Hz overscan signal mode specified Once the signal input of PC is 85Hz, this monitor is able to display at least for 10 minutes. An attention signal appears and shows "This is 85Hz overscan, change computer display input to 1280X1024@ 60 Hz " Dot rate (MHz) H. Freq (KHz) Mode Resolution V. Freq (Hz) 36.000 43.269 VESA 640 * 480 85.008 5 56.250 53.674 VESA 800 * 600 85.061 94.500 68.677 VESA 1024 * 768 84.997 Allowed TV PAL signal mode specified TV PAL Mode, this mode can be adjusted and saved. Dot rate (MHz) H freq (KHz) Mode Resolution V freq (Hz) 27.000 31.25 TV PAL 688*556 50 3. Power Supply 3.1 Set up the AC I/P at 90VAC, add (B) 2.7A loading to +12V O/P and DC O/P voltage is 12V +/- 1.2V, 2.1A loading to 5V O/P and DC O/P voltage is 5V +/- 0.25V 3.2 Check voltage at (B) 5V O/P should be within the range 5V +/- 0.25V 12V O/P should be within the range 12V +/- 1.2V 4. Display Adjustment 4.1 Access to factory mode (RS232) in auto-alignment system The communication protocol switches to RS232. 4.2 Auto color adjustment (B) Apply a 640*480/60Hz signal with 16 level grey test pattern, set brightness control at 100%, and contrast control at 50%. Adjust the R.G. B. offset, and gain to calibrate the color smoothly and 64-grey level distinguishable. 4.3 Adjustment of WHITE-D (B) Apply a 1280*1024 / 60Hz signal with white pattern, set brightness control at 100%, and contrast control at 50%. Adjust the R, G, B Sub-Gain, for the screen center, the 1931 CIE chromaticity (X, Y) co-ordinates shall be 9300�K 6500�K x (center) 0.283 � 0.020 0.313 � 0.020 y (center) 0.297 � 0.020 0.329 � 0.020 Use Minolta CA-210 for color coordinates and luminance check. Luminance is > 200 Nits in the center of the screen when brightness at 100% and contrast set to 100%. 4.4 Adjustment of sRGB (B) Apply a 1280*1024/ 60Hz signal with white pattern, set brightness control at 100%, and contrast control at 50%. Adjust the R, G, B Sub-Gain, for the screen center, the 1931 CIE chromaticity (X, Y) co-ordinates shall be; sRGB x(center) 0.313 � 0.008 y(center) 0.329 � 0.008 Ynits 180 � 10 4.5 EEPROM presetting (B) After finishing all the adjustment, set: Brightness control to 100% Contrast control to 50% OSD position at middle of screen COLOR adjusts to 6500K color. VOLUME control to 60% http://www.wjel.net 19 Go to cover page Pin No. Description 1 T.M.D.S. data2- 2 T.M.D.S. data2+ 3 T.M.D.S. data2 shield 4 No Connect 5 No Connect 6 DDC clock 7 DDC data 8 No Connect 9 T.M.D.S. data1- 10 T.M.D.S. data1+ 11 T.M.D.S. data1 shield 12 No Connect 13 No Connect 14 +5V Power 15 Ground (for +5V) - Cable detect 16 Hot plug detect 17 T.M.D.S. data0- 18 T.M.D.S. data0+ 19 T.M.D.S. data0 shield 20 No Connect 21 No Connect 22 T.M.D.S clock shield 23 T.M.D.S. clock+ 24 T.M.D.S. clock- General DDC Data Re-programming In case the DDC data memory IC or main EEPROM which storage all factory settings were replaced due to a defect, the serial numbers have to be re-programmed "Analog DDC IC, Digital DDC IC & EEPROM". It is advised to re-soldered DDC IC and main EEPROM from the old board onto the new board if circuit board have been replaced, in this case the DDC data does not need to be re-programmed. Additional information Additional information about DDC (Display Data Channel) may be obtained from Video Electronics Standards Association (VESA). Extended Display Identification Data(EDID) information may be also obtained from VESA. 1. An i486 (or above) personal computer or compatible. 2. Microsoft operation system Windows 95/98 . Y o Install the EDID_PORT_Tool under Win2000/XP . As Fig. 1 . A. Cody the "UserPort.sys" to C:\WINNT\system32\drivers(win2000) C:\WINDOWS\system32\drivers(winXP) B. Running " io.exe" everytime, Before you start to programming edid data . 4. A/D Alignment kits (12NC: 3138 106 10396): inclusion : a. Alignment box x1 (Fig. 2) b. Printer cable x1 c. (D-Sub) to (D-Sub) cable x1 D. (D-Sub) to (DVI) cable x1 System and equipment requirements ou have t 3. EDID46.EXE program Fig. 1 Fig. 1 Fig. 2 To Monitor D-sub/DVI cable DC 8~12V To Printer port Power indicator Note: The alignment box has already build-in a batteries socket for using batteries (8~12V) as power source. Pull out the socket by remove four screws at the rear of box. Please do not forget that remove batteries after programming. The energy of batteries can only drive circuits for a short period of time. PIN No. SIGNAL 1 Red video input 2 Green video input / sync on green 3 Blue video input 4 GND 5 GND - Cable detect 6 Red video GND 7 Green video GND 8 Blue video GND 9 DDC +3.3V or +5V 10 Logic GND 11 GND 12 Serial data line (SDA) 13 H-sync / H+V 14 V-sync 15 Data clock line (SCL) Pin assignment A. 15-pin D-Sub Connector B. Input DVI -D Connector pin Fig. 3 DDC Instructions 170B6 LCD http://www.wjel.net 20 Go to cover page Step 3: Installation of EDID46.EXE Method 1: Start on DDC program Start Microsoft Windows. 1. The Program"EDID46.EXE" in service manual cd-rom be copyed to C:\ . 2. Click , choose Run at start menu of Windows as shown In Fig. 5. Fig. 5 4. Click OK button. The main menu appears (as shown in Fig. 7). This is for initialize alignment box. Fig. 7 Fig. 6 3. At the submenu, type the letter of your computer's hard disk drive followed by :EDID46 (for example, C:\EDID46, as shown in Fig. 6). Note 2: During the loading, EDID46 will verify the EDID data which just loaded from monitor before proceed any further function, once the data structure of EDID can not be recognized, the following error message will appear on the screen as below. Please confirm following steps to avoid this message. 1. The data structure of EDID was incorrect. 2. DDC IC that you are trying to load data is empty. 3. Wrong communication channel has set at configuration setup windows. 4. Cables loosed or poor contact of connection. 1 Fig. 8 Note 1: If the connection is improper, you will see the following error message (as shown in Fig. 8) before entering the main menu. Meanwhile, the (read EDID) function will be disable. At this time, please make sure all cables are connected correctly and fixedly, and the procedure has been performed properly. Fig. 9 Configuration and procedure There is no Hardware DDC (DDC IC) anymore. Main EEPROM stores all factory settings and DDC data (EDID code) which is also called Software DDC. The following section describes the connection and procedure for Software DDC application. The main EEPROM can be re- programmed by enabling '' factory memory data write'' function on the DDC program (EDID46.EXE). Initialize alignment box In order to avoid that monitor entering power saving mode due to sync will cut off by alignment box, it is necessary to initialize alignment box before running programming software (EDID46.EXE). Following steps show you the procedures and connection. Step 1: Supply 8-12V DC power source to the Alignment box by plugging a DC power cord . Step 2: Connecting printer cable and D-Sub cable of monitor as Fig. 4 Fig. 4 PC 1=Power connector 2=D-SUB connector To printer port (LTP1) DC Power 8-12 V Printer Port To Monitor To PC 1 2 -----> -----> DDC Instructions 170B6 LCD http://www.wjel.net 21 Go to cover page DDC Instructions 170B6 LCD Step 3: Modify DDC data (verify EDID version, week, year) Click (new function) icon from the tool bar, bring up Step 1 of 9 as shown in Fig. 14 . EDID46 DDC application provides the function selection and Step 4: Modify DDC data (Monitor Serial No.) 1. Click Next , bring up Fig. 15. 3. Click OK button to confirm your selection. 4. Click icon (Read EDID function) to read DDC EDID data from monitor. The EDID codes will display on screen as shown in Fig. 13. Fig. 15 2. Select the DDC2Bi as the communication channel. As shown in Fig. 12. Fig. 12 Fig. 13 Fig. 14 Select and fill out, If necessary. Re-programming Analog DDC IC Step 1: After initialize alignment box, connecting all cables and box as shown in Fig. 10. Step 2: Read DDC data from monitor 1. Click icon as shown in Fig. 11 from the tool bar to bring up the Channels "Configuration Setup" windows as shown in Fig. 11. Fig. 10 1=Power connector 2=D-SUB connector PC To printer port (LTP1) DC Power 8-12V Printer Port To Monitor To PC 1 2 -----> -----> To PC Video port (D-sub) Click this button =====> Fig. 11 http://www.wjel.net 22 Go to cover page DDC Instructions 170B6 LCD Fig. 21 Fig. 18 Fig. 19 7. Click Next , bring up Fig. 21. 4. Click Next , bring up Fig.18. 5. Click Next , bring up Fig.19. 6. Click Next , bring up Fig. 20. In this step, please confirm the Descriptor Data Type is Monitor Range Limits, and all the items are same as below. Fig. 20 2. Click Next , bring up Fig.16. Fig. 16 Fig. 17 3. Click Next , bring up Fig.17. http://www.wjel.net 23 Go to cover page DDC Instructions 170B6 LCD 4). Click (Write EDID) icon from the tool bar to write DDC data. then the screen will be black for 2-3 seconds,then the screen recovers, and "ATTENTION NO VIDEO INPUT"will come on the screen of the monitor,wait for 20-30 seconds ,DDC data will be finished Writing. Fig. 24 3) Push Menu to exit OSD menu. " " Fig. 22 8. Click Next , bring up Fig. 22. - Click Finish to exit the Step window. - Serial number can be filled up at this moment (for example, TY 000658). NOTE: You must modify the Serial NO. In step 9, otherwise the Serial NO. In OSD Couldn't be modified correctly. Step 5: Write DDC data 1. Configuration should be as Fig. 23. And press OK. Fig. 23 2. Click Save. Step 7: Exit DDC program Pull down the File menu and select Exit as shown in Fig. 26. Step 6: Save DDC data Sometimes, you may need to save DDC data as a text file for using in other IC chip. To save DDC data, follow the steps below: 1. Click (Save) icon (or click "file"-> "save as") from the tool bar and give a file name as shown in Fig. 25. The file type is EDID46 file (*.ddc) which can be open in WordPad. By using WordPad, the texts of DDC data & table (128 bytes, hex code) can be modified. If DDC TEXTS & HEX Table ar completely correct, it can be saved as .ddc flie to re-load it into DDC IC for DDC Data application. Fig. 26 Step 8: Turn off the monitor, exit the factory mode. Fig. 25 2. Access Factory Mode 1). Turn off monitor. 2). 3).Press "OK" button, wait until the OSD menu with Characters "HUDSON 170B6 V023 2004/12/06" (below OSD menu) come on the Screen of the monitor(See Fig.24). [Push "AUTO" & "OK" buttons at the same time and hold them] +[Press "power" button untill comes out "Windows screen" ] => then release all buttons Factory Mode Indicator http://www.wjel.net 24 Go to cover page DDC Instructions 170B6 LCD Step 3: Modify DDC data (verify EDID version, week, year) Click (new function) icon from the tool bar, bring up Step 1 of 9 as shown in Fig. 31 . EDID46 DDC application provides the function selection and text change (select & fill out) from Step 1 to Step 9. Step 4: Modify DDC data (Monitor Serial No.) 1. Click Next , bring up Fig. 32. 3. Click OK button to confirm your selection. 4. Click icon (Read EDID function) to read DDC EDID data from monitor. The EDID codes will display on screen as shown in Fig. 30. Fig. 32 2. Select the DDC2Bi as the communication channel. As shown in Fig. 29. Fig. 29 Fig. 30 Fig. 31 Select and fill out, If necessary. Re-programming Digital DDC IC Step 1: After initialize alignment box, connecting all cables and box as shown in Fig. 27. Fig. 28 Step 2: Read DDC data from monitor 1. Click icon as shown in Fig. 11 from the tool bar to bring up the Channels "Configuration Setup" windows as shown in Fig. 28. Fig. 27 Click this button =====> D-sub to DVI-D cable 1=DVI-D connector 2=D-sub connector 3=Power Plug 2 1 3 D-sub cable DC Power 8 12V ~ PC To video card To printer port (LTP1) To Monitor Printer Port Fig. 38 Fig. 35 Fig. 36 7. Click Next , bring up Fig. 38. 4. Click Next , bring up Fig. 35. 5. Click Next , bring up Fig. 36. 6. Click Next , bring up Fig. 37. In this step, please confirm the Descriptor Data Type is Monitor Range Limits, and all the items are same as below. Fig. 37 2. Click Next , bring up Fig. 33. Fig. 33 Fig. 34 3. Click Next , bring up Fig. 34. http://www.wjel.net 25 Go to cover page DDC Instructions 170B6 LCD 3. Click (Write EDID) icon from the tool bar to write DDC data. Then wait for 20-30 seconds ,DDC data will be finished Writing. Fig. 41 Fig. 39 8. Click Next , bring up Fig. 39. - Click Finish to exit the Step window. - Serial number can be filled up at this moment (for example, TY 000658). NOTE: You must modify the Serial NO. In step 9, otherwise the Serial NO. In OSD Couldn't be modified correctly. Step 5: Write DDC data 1. Configuration should be as Fig. 40. And press OK. Fig. 40 2. Click Save. Step 7: Exit DDC program Pull down the File menu and select Exit as shown in Fig. 43. Step 8: Turn off the monitor, exit the factory mode. Fig. 43 3) Push Menu to exit OSD menu. " " Fig.42 Sometimes, you may need to save DDC data as a text file for using in other IC chip. To save DDC data, follow the steps below: 1. Click (Save) icon (or click "file"-> "save as") from the tool bar and give a file name as shown in Fig. 42. The file type is EDID46 file (*.ddc) which can be open in WordPad. By using WordPad, the texts of DDC data & table (128 bytes, hex code) can be modified. If DDC TEXTS & HEX Table ar completely correct, it can be saved as *.ddc flie to re-load it into DDC IC for DDC Data application. Step 6: Save DDC data 2. Access Factory Mode 1). Turn off monitor. 2). 3).Press "OK" button, wait until the OSD menu with Characters "HUDSON 170B6 V023 2004/12/06" (below OSD menu) come on the Screen of the monitor(See Fig.41). [Push "AUTO" & "OK" buttons at the same time and hold them] +[Press "power" button untill comes out "Windows screen" ] => then release all buttons Factory Mode Indicator http://www.wjel.net 26 Go to cover page DDC DATA 170B6 LCD THE DISPLAY DATA CHANNEL (DDC_2B) CONTENT INCLUDING: (FOR 170B6 ANALOG FOR QDI PANEL) ********************************************************************** EDID log file ********************************************************************** Vendor/Product Identification ID Manufacturer Name : PHL ID Product Code : 082C (HEX.) ID Serial Number : 12345 (HEX.) Week of Manufacture : 50 Year of Manufacture : 2004 EDID Version, Revision Version : 1 Revision : 3 Basic Display Parameters/Features Video Input Definition : Analog Video Input 0.700V/0.300V (1.00Vpp) Blank-to-Black Setup Separate Sync Composite Sync Sync on Green Serration required Maximum H Image Size : 34 Maximum V Image Size : 27 Display Transfer Characteristic : 2.2 (gamma) Feature Support (DPMS) : Standby Suspend Active Off Display Type : RGB color display Standard Default Color Space : Primary color space Preferred Timing Mode : Detailed timing block 1 Color Characteristics Red X coordinate : 0.639 Red Y coordinate : 0.339 Green X coordinate : 0.283 Green Y coordinate : 0.604 Blue X coordinate : 0.143 Blue Y coordinate : 0.085 White X coordinate : 0.313 White Y coordinate : 0.329 Established Timings Established Timings I : 720 x 400 @70Hz (IBM,VGA) 640 x 480 @60Hz (IBM,VGA) 640 x 480 @67Hz (Apple,Mac II) 640 x 480 @72Hz (VESA) 640 x 480 @75Hz (VESA) 800 x 600 @56Hz (VESA) 800 x 600 @60Hz (VESA) Established Timings II : 800 x 600 @72Hz (VESA) 800 x 600 @75Hz (VESA) 832 x 624 @75Hz (Apple,Mac II) 1024 x 768 @60Hz (VESA) 1024 x 768 @70Hz (VESA) 1024 x 768 @75Hz (VESA) 1280 x 1024 @75Hz (VESA) Manufacturer's timings : 1152 x 870 @75Hz (Apple,Mac II) Standard Timing Identification #1 Horizontal active pixels : 1280 Aspect Ratio : 5:4 Refresh Rate : 60 Detailed Timing #1 Pixel Clock (MHz) : 108 H Active (pixels) : 1280 H Blanking (pixels) : 408 V Active (lines) : 1024 V Blanking (lines) : 42 H Sync Offset (F Porch) (pixels) : 48 H Sync Pulse Width (pixels) : 112 V Sync Offset (F Porch) (lines) : 1 V Sync Pulse Width (lines) : 3 H Image Size (mm) : 338 V Image Size (mm) : 270 H Border (pixels) : 0 V Border (lines) : 0 Flags : Non-interlaced : Normal Display, No stereo : Digital Separate sync. : Positive Vertical Sync. : Positive Horizontal Sync. Monitor Descriptor #2 Serial Number : TY 123456 Monitor Descriptor #3 Monitor Name : Philips 170B Monitor Descriptor #4 Monitor Range Limits Min. Vt rate Hz : 56 Max. Vt rate Hz : 76 Min. Horiz. rate kHz : 30 Max. Horiz. rate kHz : 83 Max. Supported Pixel : 140 No secondary GTF timing formula supported. Extension Flag : 0 Check sum : B5 (HEX.) ********************************************************************** EDID data (128 bytes) ********************************************************************** 0: 00 1: ff 2: ff 3: ff 4: ff 5: ff 6: ff 7: 00 8: 41 9: 0c 10: 2c 11: 08 12: 45 13: 23 14: 01 15: 00 16: 32 17: 0e 18: 01 19: 03 20: 1f 21: 22 22: 1b 23: 78 24: ee 25: ba 26: b5 27: a3 28: 56 29: 48 30: 9a 31: 24 32: 15 33: 50 34: 54 35: bf 36: ef 37: 80 38: 81 39: 80 40: 01 41: 01 42: 01 43: 01 44: 01 45: 01 46: 01 47: 01 48: 01 49: 01 50: 01 51: 01 52: 01 53: 01 54: 30 55: 2a 56: 00 57: 98 58: 51 59: 00 60: 2a 61: 40 62: 30 63: 70 64: 13 65: 00 66: 52 67: 0e 68: 11 69: 00 70: 00 71: 1e 72: 00 73: 00 74: 00 75: ff 76: 00 77: 20 78: 54 79: 59 80: 20 81: 20 82: 31 83: 32 84: 33 85: 34 86: 35 87: 36 88: 0a 89: 20 90: 00 91: 00 92: 00 93: fc 94: 00 95: 50 96: 68 97: 69 98: 6c 99: 69 100: 70 101: 73 102: 20 103: 31 104: 37 105: 30 106: 42 107: 0a 108: 00 109: 00 110: 00 111: fd 112: 00 113: 38 114: 4c 115: 1e 116: 53 117: 0e 118: 00 119: 0a 120: 20 121: 20 122: 20 123: 20 124: 20 125: 20 126: 00 127: b5 http://www.wjel.net 27 Go to cover page DDC DATA 170B6 LCD THE DISPLAY DATA CHANNEL (DDC_2B) CONTENT INCLUDING: (FOR 170B6 DIGITAL FOR QDI PANEL) ********************************************************************** EDID log file ********************************************************************** Vendor/Product Identification ID Manufacturer Name : PHL ID Product Code : 082C (HEX.) ID Serial Number : 12345 (HEX.) Week of Manufacture : 50 Year of Manufacture : 2004 EDID Version, Revision Version : 1 Revision : 3 Basic Display Parameters/Features Video Input Definition : Digital Video Input Maximum H Image Size : 34 Maximum V Image Size : 27 Display Transfer Characteristic : 2.2 (gamma) Feature Support (DPMS) : no Standby no Suspend Active Off Display Type : RGB color display Standard Default Color Space : Primary color space Preferred Timing Mode : Detailed timing block 1 Color Characteristics Red X coordinate : 0.639 Red Y coordinate : 0.339 Green X coordinate : 0.283 Green Y coordinate : 0.604 Blue X coordinate : 0.143 Blue Y coordinate : 0.085 White X coordinate : 0.313 White Y coordinate : 0.329 Established Timings Established Timings I : 720 x 400 @70Hz (IBM,VGA) 640 x 480 @60Hz (IBM,VGA) 640 x 480 @67Hz (Apple,Mac II) 640 x 480 @72Hz (VESA) 640 x 480 @75Hz (VESA) 800 x 600 @56Hz (VESA) 800 x 600 @60Hz (VESA) Established Timings II : 800 x 600 @72Hz (VESA) 800 x 600 @75Hz (VESA) 832 x 624 @75Hz (Apple,Mac II) 1024 x 768 @60Hz (VESA) 1024 x 768 @70Hz (VESA) 1024 x 768 @75Hz (VESA) 1280 x 1024 @75Hz (VESA) Manufacturer's timings : 1152 x 870 @75Hz (Apple,Mac II) Standard Timing Identification #1 Horizontal active pixels : 1280 Aspect Ratio : 5:4 Refresh Rate : 60 Detailed Timing #1 Pixel Clock (MHz) : 108 H Active (pixels) : 1280 H Blanking (pixels) : 408 V Active (lines) : 1024 V Blanking (lines) : 42 H Sync Offset (F Porch) (pixels): 48 H Sync Pulse Width (pixels) : 112 V Sync Offset (F Porch) (lines) : 1 V Sync Pulse Width (lines) : 3 H Image Size (mm) : 338 V Image Size (mm) : 270 H Border (pixels) : 0 V Border (lines) : 0 Flags : Non-interlaced : Normal Display, No stereo : Digital Separate sync. : Positive Vertical Sync. : Positive Horizontal Sync. Monitor Descriptor #2 Serial Number : TY 123456 Monitor Descriptor #3 Monitor Name : Philips 170B Monitor Descriptor #4 Monitor Range Limits Min. Vt rate Hz : 56 Max. Vt rate Hz : 76 Min. Horiz. rate kHz : 30 Max. Horiz. rate kHz : 83 Max. Supported Pixel : 140 No secondary GTF timing formula supported. Extension Flag : 0 Check sum : 14 (HEX.) ********************************************************************** EDID data (128 bytes) ********************************************************************** 0: 00 1: ff 2: ff 3: ff 4: ff 5: ff 6: ff 7: 00 8: 41 9: 0c 10: 2c 11: 08 12: 45 13: 23 14: 01 15: 00 16: 32 17: 0e 18: 01 19: 03 20: 80 21: 22 22: 1b 23: 78 24: 2e 25: ba 26: b5 27: a3 28: 56 29: 48 30: 9a 31: 24 32: 15 33: 50 34: 54 35: bf 36: ef 37: 80 38: 81 39: 80 40: 01 41: 01 42: 01 43: 01 44: 01 45: 01 46: 01 47: 01 48: 01 49: 01 50: 01 51: 01 52: 01 53: 01 54: 30 55: 2a 56: 00 57: 98 58: 51 59: 00 60: 2a 61: 40 62: 30 63: 70 64: 13 65: 00 66: 52 67: 0e 68: 11 69: 00 70: 00 71: 1e 72: 00 73: 00 74: 00 75: ff 76: 00 77: 20 78: 54 79: 59 80: 20 81: 20 82: 31 83: 32 84: 33 85: 34 86: 35 87: 36 88: 0a 89: 20 90: 00 91: 00 92: 00 93: fc 94: 00 95: 50 96: 68 97: 69 98: 6c 99: 69 100: 70 101: 73 102: 20 103: 31 104: 37 105: 30 106: 42 107: 0a 108: 00 109: 00 110: 00 111: fd 112: 00 113: 38 114: 4c 115: 1e 116: 53 117: 0e 118: 00 119: 0a 120: 20 121: 20 122: 20 123: 20 124: 20 125: 20 126: 00 127: 14 http://www.wjel.net 28 Go to cover page DDC DATA 170B6 LCD THE DISPLAY DATA CHANNEL (DDC_2B) CONTENT INCLUDING: (FOR 150B6 ANALOG FOR LPL/CPT /QDI PANEL) ********************************************************************** EDID log file ********************************************************************** Vendor/Product Identification ID Manufacturer Name : PHL ID Product Code : 082A (HEX.) ID Serial Number : 1E240 (HEX.) Week of Manufacture : 48 Year of Manufacture : 2004 EDID Version, Revision Version : 1 Revision : 3 Basic Display Parameters/Features Video Input Definition : Analog Video Input 0.700V/0.300V (1.00Vpp) without Blank-to-Black Setup Separate Sync Composite Sync Sync on Green no Serration required Maximum H Image Size : 30 Maximum V Image Size : 23 Display Transfer Characteristic : 2.2 (gamma) Feature Support (DPMS) : Standby Suspend Active Off Display Type : RGB color display Standard Default Color Space : Primary color space Preferred Timing Mode : Detailed timing block 1 Color Characteristics Red X coordinate : 0.636 Red Y coordinate : 0.346 Green X coordinate : 0.307 Green Y coordinate : 0.575 Blue X coordinate : 0.145 Blue Y coordinate : 0.088 White X coordinate : 0.313 White Y coordinate : 0.329 Established Timings Established Timings I : 720 x 400 @70Hz (IBM,VGA) 640 x 480 @60Hz (IBM,VGA) 640 x 480 @67Hz (Apple,Mac II) 640 x 480 @72Hz (VESA) 640 x 480 @75Hz (VESA) 800 x 600 @56Hz (VESA) 800 x 600 @60Hz (VESA) Established Timings II : 800 x 600 @72Hz (VESA) 800 x 600 @75Hz (VESA) 832 x 624 @75Hz (Apple,Mac II) 1024 x 768 @60Hz (VESA) 1024 x 768 @70Hz (VESA) 1024 x 768 @75Hz (VESA) Manufacturer's timings : Standard Timing Identification : Unused Detailed Timing #1 Pixel Clock (MHz) : 65 H Active (pixels) : 1024 H Blanking (pixels) : 320 V Active (lines) : 768 V Blanking (lines) : 38 H Sync Offset (F Porch) (pixels) : 24 H Sync Pulse Width (pixels) : 136 V Sync Offset (F Porch) (lines) : 3 V Sync Pulse Width (lines) : 6 H Image Size (mm) : 307 V Image Size (mm) : 230 H Border (pixels) : 0 V Border (lines) : 0 Flags : Non-interlaced : Normal Display, No stereo : Digital Separate sync. : Negative Vertical Sync. : Negative Horizontal Sync. Monitor Descriptor #2 Serial Number : BZ 123456 Monitor Descriptor #3 Monitor Name : Philips 150B Monitor Descriptor #4 Monitor Range Limits Min. Vt rate Hz : 56 Max. Vt rate Hz : 76 Min. Horiz. rate kHz : 30 Max. Horiz. rate kHz : 63 Max. Supported Pixel : 80 No secondary GTF timing formula supported. Extension Flag : 0 Check sum : A8 (HEX.) ********************************************************************** EDID data (128 bytes) ********************************************************************** 0: 00 1: ff 2: ff 3: ff 4: ff 5: ff 6: ff 7: 00 8: 41 9: 0c 10: 2a 11: 08 12: 40 13: e2 14: 01 15: 00 16: 30 17: 0e 18: 01 19: 03 20: 0e 21: 1e 22: 17 23: 78 24: ee 25: e9 26: 25 27: a2 28: 58 29: 4e 30: 93 31: 25 32: 16 33: 50 34: 54 35: bf 36: ee 37: 00 38: 01 39: 01 40: 01 41: 01 42: 01 43: 01 44: 01 45: 01 46: 01 47: 01 48: 01 49: 01 50: 01 51: 01 52: 01 53: 01 54: 64 55: 19 56: 00 57: 40 58: 41 59: 00 60: 26 61: 30 62: 18 63: 88 64: 36 65: 00 66: 33 67: e6 68: 10 69: 00 70: 00 71: 18 72: 00 73: 00 74: 00 75: ff 76: 00 77: 20 78: 42 79: 5a 80: 20 81: 20 82: 31 83: 32 84: 33 85: 34 86: 35 87: 36 88: 0a 89: 20 90: 00 91: 00 92: 00 93: fc 94: 00 95: 50 96: 68 97: 69 98: 6c 99: 69 100: 70 101: 73 102: 20 103: 31 104: 35 105: 30 106: 42 107: 0a 108: 00 109: 00 110: 00 111: fd 112: 00 113: 38 114: 4c 115: 1e 116: 3f 117: 08 118: 00 119: 0a 120: 20 121: 20 122: 20 123: 20 124: 20 125: 20 126: 00 127: a8 http://www.wjel.net 29 Go to cover page DDC DATA 170B6 LCD THE DISPLAY DATA CHANNEL (DDC_2B) CONTENT INCLUDING: (FOR 150B6 DIGITAL FOR LPL/CPT/QDI PANEL) ********************************************************************** EDID log file ********************************************************************** Vendor/Product Identification ID Manufacturer Name : PHL ID Product Code : 082A (HEX.) ID Serial Number : 1E240 (HEX.) Week of Manufacture : 48 Year of Manufacture : 2004 EDID Version, Revision Version : 1 Revision : 3 Basic Display Parameters/Features Video Input Definition : Digital Video Input Maximum H Image Size : 30 Maximum V Image Size : 23 Display Transfer Characteristic : 2.2 (gamma) Feature Support (DPMS) : Standby Suspend Active Off Display Type : RGB color display Standard Default Color Space : Primary color space Preferred Timing Mode : Detailed timing block 1 Color Characteristics Red X coordinate : 0.636 Red Y coordinate : 0.346 Green X coordinate : 0.307 Green Y coordinate : 0.575 Blue X coordinate : 0.145 Blue Y coordinate : 0.088 White X coordinate : 0.313 White Y coordinate : 0.329 Established Timings Established Timings I : 720 x 400 @70Hz (IBM,VGA) 640 x 480 @60Hz (IBM,VGA) 640 x 480 @67Hz (Apple,Mac II) 640 x 480 @72Hz (VESA) 640 x 480 @75Hz (VESA) 800 x 600 @56Hz (VESA) 800 x 600 @60Hz (VESA) Established Timings II : 800 x 600 @72Hz (VESA) 800 x 600 @75Hz (VESA) 832 x 624 @75Hz (Apple,Mac II) 1024 x 768 @60Hz (VESA) 1024 x 768 @70Hz (VESA) 1024 x 768 @75Hz (VESA) Manufacturer's timings : Standard Timing Identification : Unused Detailed Timing #1 Pixel Clock (MHz) : 65 H Active (pixels) : 1024 H Blanking (pixels) : 320 V Active (lines) : 768 V Blanking (lines) : 38 H Sync Offset (F Porch) (pixels) : 24 H Sync Pulse Width (pixels) : 136 V Sync Offset (F Porch) (lines) : 3 V Sync Pulse Width (lines) : 6 H Image Size (mm) : 307 V Image Size (mm) : 230 H Border (pixels) : 0 V Border (lines) : 0 Flags : Non-interlaced : Normal Display, No stereo : Digital Separate sync. : Negative Vertical Sync. : Negative Horizontal Sync. Monitor Descriptor #2 Serial Number : BZ 123456 Monitor Descriptor #3 Monitor Name : Philips 150B Monitor Descriptor #4 Monitor Range Limits Min. Vt rate Hz : 56 Max. Vt rate Hz : 76 Min. Horiz. rate kHz : 30 Max. Horiz. rate kHz : 63 Max. Supported Pixel : 80 No secondary GTF timing formula supported. Extension Flag : 0 Check sum : 36 (HEX.) ********************************************************************** EDID data (128 bytes) ********************************************************************** 0: 00 1: ff 2: ff 3: ff 4: ff 5: ff 6: ff 7: 00 8: 41 9: 0c 10: 2a 11: 08 12: 40 13: e2 14: 01 15: 00 16: 30 17: 0e 18: 01 19: 03 20: 80 21: 1e 22: 17 23: 78 24: ee 25: e9 26: 25 27: a2 28: 58 29: 4e 30: 93 31: 25 32: 16 33: 50 34: 54 35: bf 36: ee 37: 00 38: 01 39: 01 40: 01 41: 01 42: 01 43: 01 44: 01 45: 01 46: 01 47: 01 48: 01 49: 01 50: 01 51: 01 52: 01 53: 01 54: 64 55: 19 56: 00 57: 40 58: 41 59: 00 60: 26 61: 30 62: 18 63: 88 64: 36 65: 00 66: 33 67: e6 68: 10 69: 00 70: 00 71: 18 72: 00 73: 00 74: 00 75: ff 76: 00 77: 20 78: 42 79: 5a 80: 20 81: 20 82: 31 83: 32 84: 33 85: 34 86: 35 87: 36 88: 0a 89: 20 90: 00 91: 00 92: 00 93: fc 94: 00 95: 50 96: 68 97: 69 98: 6c 99: 69 100: 70 101: 73 102: 20 103: 31 104: 35 105: 30 106: 42 107: 0a 108: 00 109: 00 110: 00 111: fd 112: 00 113: 38 114: 4c 115: 1e 116: 3f 117: 08 118: 00 119: 0a 120: 20 121: 20 122: 20 123: 20 124: 20 125: 20 126: 00 127: 36 http://www.wjel.net 30 Go to cover page DDC DATA 170B6 LCD THE DISPLAY DATA CHANNEL (DDC_2B) CONTENT INCLUDING: (FOR 190B6 ANALOG ) ********************************************************************** EDID log file ********************************************************************** Vendor/Product Identification ID Manufacturer Name : PHL ID Product Code : 0830 (HEX.) ID Serial Number : 1234 (HEX.) Week of Manufacture : 52 Year of Manufacture : 2004 EDID Version, Revision Version : 1 Revision : 3 Basic Display Parameters/Features Video Input Definition : Analog Video Input 0.700V/0.300V (1.00Vpp) without Blank-to-Black Setup Separate Sync Composite Sync Sync on Green no Serration required Maximum H Image Size : 38 Maximum V Image Size : 30 Display Transfer Characteristic : 2.2 (gamma) Feature Support (DPMS) : no Standby no Suspend Active Off Display Type : RGB color display Standard Default Color Space : Primary color space Preferred Timing Mode : Detailed timing block 1 Color Characteristics Red X coordinate : 0.637 Red Y coordinate : 0.348 Green X coordinate : 0.292 Green Y coordinate : 0.618 Blue X coordinate : 0.142 Blue Y coordinate : 0.073 White X coordinate : 0.313 White Y coordinate : 0.329 Established Timings Established Timings I : 720 x 400 @70Hz (IBM,VGA) 640 x 480 @60Hz (IBM,VGA) 640 x 480 @67Hz (Apple,Mac II) 640 x 480 @72Hz (VESA) 640 x 480 @75Hz (VESA) 800 x 600 @56Hz (VESA) 800 x 600 @60Hz (VESA) Established Timings II : 800 x 600 @72Hz (VESA) 800 x 600 @75Hz (VESA) 832 x 624 @75Hz (Apple,Mac II) 1024 x 768 @60Hz (VESA) 1024 x 768 @70Hz (VESA) 1024 x 768 @75Hz (VESA) 1280 x 1024 @75Hz (VESA) Manufacturer's timings : 1152 x 870 @75Hz (Apple,Mac II) Standard Timing Identification #1 Horizontal active pixels : 1280 Aspect Ratio : 5:4 Refresh Rate : 60 Detailed Timing #1 Pixel Clock (MHz) : 108 H Active (pixels) : 1280 H Blanking (pixels) : 408 V Active (lines) : 1024 V Blanking (lines) : 42 H Sync Offset (F Porch) (pixels) : 48 H Sync Pulse Width (pixels) : 112 V Sync Offset (F Porch) (lines) : 1 V Sync Pulse Width (lines) : 3 H Image Size (mm) : 338 V Image Size (mm) : 270 H Border (pixels) : 0 V Border (lines) : 0 Flags : Non-interlaced : Normal Display, No stereo : Digital Separate sync. : Positive Vertical Sync. : Positive Horizontal Sync. Monitor Descriptor #2 Serial Number : TY 123456 Monitor Descriptor #3 Monitor Name : Philips 190B Monitor Descriptor #4 Monitor Range Limits Min. Vt rate Hz : 56 Max. Vt rate Hz : 76 Min. Horiz. rate kHz : 30 Max. Horiz. rate kHz : 83 Max. Supported Pixel : 140 No secondary GTF timing formula supported. Extension Flag : 0 Check sum : 81 (HEX.) ********************************************************************** EDID data (128 bytes) ********************************************************************** 0: 00 1: ff 2: ff 3: ff 4: ff 5: ff 6: ff 7: 00 8: 41 9: 0c 10: 30 11: 08 12: 34 13: 12 14: 00 15: 00 16: 34 17: 0e 18: 01 19: 03 20: 0e 21: 26 22: 1e 23: 78 24: 2e 25: 0d 26: 75 27: a3 28: 59 29: 4a 30: 9e 31: 24 32: 12 33: 50 34: 54 35: bf 36: ef 37: 80 38: 81 39: 80 40: 01 41: 01 42: 01 43: 01 44: 01 45: 01 46: 01 47: 01 48: 01 49: 01 50: 01 51: 01 52: 01 53: 01 54: 30 55: 2a 56: 00 57: 98 58: 51 59: 00 60: 2a 61: 40 62: 30 63: 70 64: 13 65: 00 66: 52 67: 0e 68: 11 69: 00 70: 00 71: 1e 72: 00 73: 00 74: 00 75: ff 76: 00 77: 20 78: 54 79: 59 80: 20 81: 20 82: 31 83: 32 84: 33 85: 34 86: 35 87: 36 88: 0a 89: 20 90: 00 91: 00 92: 00 93: fc 94: 00 95: 50 96: 68 97: 69 98: 6c 99: 69 100: 70 101: 73 102: 20 103: 31 104: 39 105: 30 106: 42 107: 0a 108: 00 109: 00 110: 00 111: fd 112: 00 113: 38 114: 4c 115: 1e 116: 53 117: 0e 118: 00 119: 0a 120: 20 121: 20 122: 20 123: 20 124: 20 125: 20 126: 00 127: 81 http://www.wjel.net 31 Go to cover page DDC DATA 170B6 LCD THE DISPLAY DATA CHANNEL (DDC_2B) CONTENT INCLUDING: (FOR 190B6 DIGITAL) ********************************************************************** EDID log file ********************************************************************** Vendor/Product Identification ID Manufacturer Name : PHL ID Product Code : 0830 (HEX.) ID Serial Number : 1234 (HEX.) Week of Manufacture : 52 Year of Manufacture : 2004 EDID Version, Revision Version : 1 Revision : 3 Basic Display Parameters/Features Video Input Definition : Digital Video Input Maximum H Image Size : 38 Maximum V Image Size : 30 Display Transfer Characteristic : 2.2 (gamma) Feature Support (DPMS) : no Standby no Suspend Active Off Display Type : RGB color display Standard Default Color Space : Primary color space Preferred Timing Mode : Detailed timing block 1 Color Characteristics Red X coordinate : 0.637 Red Y coordinate : 0.348 Green X coordinate : 0.292 Green Y coordinate : 0.618 Blue X coordinate : 0.142 Blue Y coordinate : 0.073 White X coordinate : 0.313 White Y coordinate : 0.329 Established Timings Established Timings I : 720 x 400 @70Hz (IBM,VGA) 640 x 480 @60Hz (IBM,VGA) 640 x 480 @67Hz (Apple,Mac II) 640 x 480 @72Hz (VESA) 640 x 480 @75Hz (VESA) 800 x 600 @56Hz (VESA) 800 x 600 @60Hz (VESA) Established Timings II : 800 x 600 @72Hz (VESA) 800 x 600 @75Hz (VESA) 832 x 624 @75Hz (Apple,Mac II) 1024 x 768 @60Hz (VESA) 1024 x 768 @70Hz (VESA) 1024 x 768 @75Hz (VESA) 1280 x 1024 @75Hz (VESA) Manufacturer's timings : 1152 x 870 @75Hz (Apple,Mac II) Standard Timing Identification #1 Horizontal active pixels : 1280 Aspect Ratio : 5:4 Refresh Rate : 60 Detailed Timing #1 Pixel Clock (MHz) : 108 H Active (pixels) : 1280 H Blanking (pixels) : 408 V Active (lines) : 1024 V Blanking (lines) : 42 H Sync Offset (F Porch) (pixels) : 48 H Sync Pulse Width (pixels) : 112 V Sync Offset (F Porch) (lines) : 1 V Sync Pulse Width (lines) : 3 H Image Size (mm) : 338 V Image Size (mm) : 270 H Border (pixels) : 0 V Border (lines) : 0 Flags : Non-interlaced : Normal Display, No stereo : Digital Separate sync. : Positive Vertical Sync. : Positive Horizontal Sync. Monitor Descriptor #2 Serial Number : TY 123456 Monitor Descriptor #3 Monitor Name : Philips 190B Monitor Descriptor #4 Monitor Range Limits Min. Vt rate Hz : 56 Max. Vt rate Hz : 76 Min. Horiz. rate kHz : 30 Max. Horiz. rate kHz : 83 Max. Supported Pixel : 140 No secondary GTF timing formula supported. Extension Flag : 0 Check sum : 0F (HEX.) ********************************************************************** EDID data (128 bytes) ********************************************************************** 0: 00 1: ff 2: ff 3: ff 4: ff 5: ff 6: ff 7: 00 8: 41 9: 0c 10: 30 11: 08 12: 34 13: 12 14: 00 15: 00 16: 34 17: 0e 18: 01 19: 03 20: 80 21: 26 22: 1e 23: 78 24: 2e 25: 0d 26: 75 27: a3 28: 59 29: 4a 30: 9e 31: 24 32: 12 33: 50 34: 54 35: bf 36: ef 37: 80 38: 81 39: 80 40: 01 41: 01 42: 01 43: 01 44: 01 45: 01 46: 01 47: 01 48: 01 49: 01 50: 01 51: 01 52: 01 53: 01 54: 30 55: 2a 56: 00 57: 98 58: 51 59: 00 60: 2a 61: 40 62: 30 63: 70 64: 13 65: 00 66: 52 67: 0e 68: 11 69: 00 70: 00 71: 1e 72: 00 73: 00 74: 00 75: ff 76: 00 77: 20 78: 54 79: 59 80: 20 81: 20 82: 31 83: 32 84: 33 85: 34 86: 35 87: 36 88: 0a 89: 20 90: 00 91: 00 92: 00 93: fc 94: 00 95: 50 96: 68 97: 69 98: 6c 99: 69 100: 70 101: 73 102: 20 103: 31 104: 39 105: 30 106: 42 107: 0a 108: 00 109: 00 110: 00 111: fd 112: 00 113: 38 114: 4c 115: 1e 116: 53 117: 0e 118: 00 119: 0a 120: 20 121: 20 122: 20 123: 20 124: 20 125: 20 126: 00 127: 0f http://www.wjel.net 32 Go to cover page ISP Instructions 170B6 LCD Update the firmware 1. Double click the Easywriter.exe icon in desktop then appears window as shown in Fig.7 . Step 5 :Copy the 313811707781_141_F1AD to C:\170B6 as shown in Fig. 5 . 6. Install and setup the Easywriter program Step 1 : Make a folder in your PC as shown in Fig. 3. For example : C:\170B6 Step 2 : Copy ISP Software Easywriter into your folder as shown in Fig.3. Step 3 : Unzip Easywriter.zip into your folder as shown in Fig. 3. Step 4 : Double click the EasywriterV2.09a_user.exe icon to install the Application as Fig. 4. .zip Configuration and procedure "Easywriter " The software is provided by Novatek to upgrade the firmware of CPU. DDC2BI_ISP TOOL (3138 149 53161) is for the interface between "Parallel Port of PC" and "15 pin-D-SUB connector of Monitor". It is a windows-based program, which cannot be run in MS-DOS. System and equipment requirements 1. An i486 (or above) personal computer or compatible. 2. Microsoft operation system Windows 95/98/2000/XP. 4. as shown in Fig. 1 3. ISP Software " Easywrite " DDC2BI_ISP TOOL (3138 106 10396) 5. Connect and Mains cord to Monitor as shown in Fig. 2. DDC2BI_ISP TOOL Fig. 1 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Parallel Port to Print Port in PC D-SUB to monitor Fig.2 PC To printer port (LTP1) To video card Video cable Connect to Mains cord Monitor (A) 170B6 -Monitor (B) D-Sub Connect to Mains cord at this moment. -------------------------------> ISP box Fig. 3 2. Press the Load hex then select the V200.hex as shown in Fig. 8. 3. From the menu that appears, choose the "NT68F633(64K)" as shown in Fig. 9. http://www.wjel.net 33 Go to cover page ISP Instructions 170B6 LCD Fig. 8 If there is a warring message coming as shown in Fig 13. , you have to check the AC power, Video cable, or Novatek MCU. Fig. 9 Fig. 10 Fig. 11 Fig. 13 5 Press the file --> exit to end program , as shown in Fig. 12. 4) Turn off the monitor, exit the factory mode. Fig. 14 6. Check the firmware version 1). Turn off monitor. 2). 3).Press "OK" button, wait until the OSD menu come on the Screen of the monitor.You will find, after upgrade, the version have already changed from The former "HUDSON 170B6 V023 2004/12/06" to the Present "HUDSON 170B6 V200 2005/02/02" as shown in Fig. 14 and Fig. 15. [Push "AUTO" & "OK" buttons at the same time and hold them] +[Press "power" button untill comes out "Windows screen" ] => then release all buttons Factory Mode Indicator 4 Press the AUTO to running program , the firmware be updated as shown in Fig. 10~11. Fig. 12 Factory Mode Indicator http://www.wjel.net 34 Go to cover page 170B6 LCD All units that are returned for service or repair must pass the original manufactures safety tests. Safety testing requires both and testing. Hipot Ground Continuity HI-POT TEST INSTRUCTION 1.Application requirements 2. 1.1 All mains operated products must pass the Hi-Pot test as described in this instruction. 1.2 This test must be performed again after the covers have been refitted following the repair, inspection or modification of the product. 2.1 Connecting conditions 2.1.1 The test specified must be applied between the parallel- blade plug of the mainscord and all accessible metal parts of the product. 2.1.2 Before carrying out the test, reliable conductive connections must be ensured and thereafter be maintained throughout the test period. 2.1.3 The mains switch(es) must be in the "ON" position. 2.2 Test Requirements All products should be HiPot and Ground Continuity tested as follows: Test 2820VDC 1700VDC Test current: voltage (2000VAC) (1200VAC) 25A,AC Test time: Test time 3 seconds 1 second 3 seconds(min.) (min.) Resistance required: Trip set at 100 uA 5 mA <=0.09+Rohm, current for Max. R is the (Tester) limitation; set resistance of at 0.1 uA for the mains cord. Min. Limitation Ramp set at 2 time seconds (Tester) Test method Condition HiPot Test for HiPot Test for Ground Continuity products where products where Test requirement the mains input the mains input is range is Full 110V AC(USA range(or 220V type) AC) 2.2.1 The minimum test duration for Quality Control Inspector must be 1 minute. 2.2.2 The test voltage must be maintained within the specified voltage + 5%. 2.2.3 There must be no breakdown during the test. 2.2.4 The grounding blade or pin of mains plug must be conducted with accessible metal parts. 3. Equipments and Connection 3.1. Equipments For example : - ChenHwa 9032 PROGRAMMABLE AUTO SAFETY TESTER - ChenHwa 510B Digital Grounding Continuity Tester - ChenHwa 901 (AC Hi-pot test), 902 (AC, DC Hi-pot test) Withstanding Tester 3.2. Connection 4. Recording Hipot and Ground Continuity testing records have to be kept for a period of 10 years. * Turn on the power switch of monitor before Hipot and Ground Continuity testing. Connect the "video cable" or "grounding screw" to the CLIP on your tester. Video cable (Rear view of monitor) Connect the power cord to the monitor. Grounding screw Power outlet (ChenHwa 9032 tester) Clip Clip Safety Test Requirements http://www.wjel.net 35 Go to cover page 170B6 LCD Wiring Diagram http://www.wjel.net Block Diagram(170B6) 36 Go to cover page 170B6 LCD Buy Buy--In In AC AC--DC Power supply DC Power supply Inverter and Inverter and DC DC--DC converter DC converter (150mm x 135mm) (150mm x 135mm) Scalar(LVDS interface) Scalar(LVDS interface) Analog & Digital Input Analog & Digital Input (110mm x 74mm) (110mm x 74mm) DVI-D AC input Connector Connector 30 pin wafer Connector Connector 30 Pin FFC Cable Connector 11P-Connector D_SUB USB PLUG 11P-Connector LS LS AUDIO & CONTROL BD 110 mm ScalerIC (NT68563EF) 11-Pin Power Input connector LVDS Interface Connector MCU NT68F631AL (NT68F633L Optional) 11-Pin Control Output Connector 74mm EEPROM D_SUB 12MHz XTAL DVI-D SCALER NT68563EF EEPROM M24C16 DDCSDA DDCSCL R/G/B CLK and R/G/B DATA (LVDS interface) CPU (64K) NT68F633 CLK: 12MHz IICSDA IICSCL HS/VS Connector to Audio & Ctrl Board Connector to Panel VIDEO Input LVDS Tx Panel_PWR +5V D-SUB DVISDA DVISCL RX0+/-, 1+/-,2+/- DVI-D RXC+/- Connector to Inverter BL_CTRL Brightness System Block Diagram Scaler Board Layout Scaler Scaler Board Block Diagram Board Block Diagram http://www.wjel.net 37 Go to cover page 170B6 LCD Block Diagram-1(150B6) Audio &Control Board Scaler Board 12V Brightness GND AC BL_CTRL Panel_ID 3.3V Panel 3.3V LVDS LIPS Backlight Audio & Control Board PC-Audio Headphone DVI-D VGA B6 System Block Diagram v Scaler NT68563XF R/G/B ADDR, Data 20 Pin Connector to panel TXO3 (N/P) LVDS HS/VS 24C16 IIC LIPS BL_EN, Brightness Panel PWR LD1117AS33 Control Board LD1117AS18 SCL,SDA(ISP) Key LED AC input CPU NT68F633 (64K) RSTN HSO VSO 1.8V 3.3V TXO2 (N/P) TXO0 (N/P) TXO1 (N/P) TXOC (N/P) D_sub 3.3V Panel_PWR 3.3V DVI RX0,1,2, RXC SCL,SDA(DVI) 150B6 Scaler Board Block Diagram http://www.wjel.net 38 Go to cover page 170B6 LCD Block Diagram-2(150B6) 150B6 LIPS Block Diagram_Foxconn 150B6 LIPS Block Diagram_Foxconn 150B6 LIPS (Adapter)Block Diagram_Lienchang 150B6 LIPS (Adapter)Block Diagram_Lienchang 150B6 LIPS (Inverter)Block Diagram_ 150B6 LIPS (Inverter)Block Diagram_Liechang Liechang 150B6 Layout Placement LIPS Board AC 12V XGA : 2 lamps 115 mm 135 mm 270 mm 40 mm Control Board Transformer Transformer To scaler 11 Pin To scaler 11 Pin 110 mm Scaler DVI-D DSUB MCU Crystal 74 mm M24C16 To LIPS 11 Pin To control board 11 pin To speaker 2 Pin To speaker 2 Pin http://www.wjel.net 39 Go to cover page 170B6 LCD Block Diagram(190B6) System Block Diagram System Block Diagram Buy Buy--In In AC AC--DC Power supply DC Power supply Inverter and Inverter and DC DC--DC converter DC converter (150mm x 135mm) (150mm x 135mm) Scalar(LVDS interface) Scalar(LVDS interface) Analog & Digital Input Analog & Digital Input (110mm x 74mm) (110mm x 74mm) DVI-D AC input Connector Connector 30 pin wafer Connector Connector 30 Pin FFC Cable Connector 11P-Connector D_SUB USB PLUG 11P- 7+4P Connector LS LS CONTROL BD AUDIO BD Scaler Board Layout #1 Scaler Board Layout #1 110 mm Scaler IC (NT68563EF) 11-Pin Power Input connector LVDS Interface Connector MCU NT68F631AL (NT68F633L Optional) 11-Pin Control Output Connector 74mm EEPROM D_SUB 12MHz XTAL DVI-D Scaler Board Block Diagram Scaler Board Block Diagram SCALER NT68563EF EEPROM M24C16 DDCSDA DDCSCL R/G/B CLK and R/G/B DATA (LVDS interface) CPU (64K) NT68F633 CLK: 12MHz IICSDA IICSCL HS/VS Connector to Audio & Ctrl Board Connector to Panel VIDEO Input LVDS Tx Panel_PWR +5V D-SUB DVISDA DVISCL RX0+/-, 1+/-,2+/- DVI-D RXC+/- Connector to Inverter BL_CTRL Brightness http://www.wjel.net 40 Go to cover page 170B6 LCD Scaler Diagram-1(170B6) 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 http://www.wjel.net 41 Go to cover page 170B6 LCD Scaler Diagram-2(170B6) http://www.wjel.net 42 Go to cover page 170B6 LCD Scaler Diagram-3(170B6) 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 http://www.wjel.net 43 Go to cover page 170B6 LCD Scaler Diagram-4(170B6) 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 10 11 12 13 http://www.wjel.net 44 Go to cover page 170B6 LCD Scaler Diagram-1(150B6) http://www.wjel.net 45 Go to cover page 170B6 LCD Scaler Diagram-2(150B6) http://www.wjel.net 46 Go to cover page 170B6 LCD Scaler Diagram-3(150B6) 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 http://www.wjel.net 47 Go to cover page 170B6 LCD Scaler Diagram-4(150B6) 1 2 3 4 5 6 7 8 9 10 11 12 13 http://www.wjel.net 48 Go to cover page 170B6 LCD Scaler Diagram-1(190B6) http://www.wjel.net 49 Go to cover page 170B6 LCD Scaler Diagram-2(190B6) http://www.wjel.net 50 Go to cover page 170B6 LCD Scaler Diagram-3(190B6) 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 http://www.wjel.net 51 Go to cover page 170B6 LCD Scaler Diagram-4(190B6) 1 2 3 4 5 6 7 8 9 10 11 12 13 1 2 3 4 5 6 7 8 9 10 11 12 13 http://www.wjel.net 52 Go to cover page 170B6 LCD Scaler Board C.B.A.-1(150B6/170B6/190B6) http://www.wjel.net 53 Go to cover page 170B6 LCD Scaler Board C.B.A.-2(150B6/170B6/190B6) http://www.wjel.net 54 Go to cover page 170B6 LCD AUDIO&CONTROL Diagram 170B6 ( ) http://www.wjel.net 55 Go to cover page 170B6 LCD AUDIO&CONTROL 170B6 ( ) Board C.B.A http://www.wjel.net 56 Go to cover page 170B6 LCD AUDIO&CONTROL Diagram 150B6 ( ) http://www.wjel.net 57 Go to cover page 170B6 LCD AUDIO&CONTROL 150B6 ( ) Board C.B.A http://www.wjel.net 58 Go to cover page 170B6 LCD AUDIO Diagram 190B6 ( ) http://www.wjel.net 59 Go to cover page 170B6 LCD AUDIO 190B6 ( ) Board C.B.A-1 http://www.wjel.net 60 Go to cover page 170B6 LCD AUDIO 190B6 ( ) Board C.B.A-2 http://www.wjel.net 61 Go to cover page 170B6 LCD CONTROL Diagram&C.B.A 190B6 ( ) http://www.wjel.net 62 Go to cover page 170B6 LCD Power Diagram-1(170B6/190B6) http://www.wjel.net 63 Go to cover page 170B6 LCD Power Diagram-2(170B6/190B6) http://www.wjel.net 64 Go to cover page 170B6 LCD Power Board C.B.A-1(170B6/190B6) http://www.wjel.net 65 Go to cover page 170B6 LCD Power Board C.B.A-2(170B6/190B6) http://www.wjel.net 66 Go to cover page 170B6 LCD Power Diagram-1(150B6) http://www.wjel.net 67 Go to cover page 170B6 LCD Power Diagram-2(150B6) http://www.wjel.net 68 Go to cover page 170B6 LCD Power Diagram-3(150B6) 1 2 6114 D/MBR5150 3148 R/24/1206 1 2 + 2124 C/NC 3125 R/2K/1206 +12VO +3.3V 2112 C/2200p/400V/Y1 2125 C/104K/0805 5 3 8 10 2 1 9 5102 T/22.0926.60 3151 R/787/0805* 12NC:8238 277 17291 T50P063.00 1 2 1104 1/HS-25*17 1 2 6108 D/SB560 1 2 3 4 5 6 7 8 9 10 11 1102 1/CN/61249 +3.3V +12VO BL_CTL BRIGHTNESS PANEL_ID 1 2 + 2114 C/470uF/25V 1 2 3 7107 7/TL431 3141 R/10K/0805 2131 C/104K/0805 2132 C/NC/0805 3140 R/2.2K/0805* 3139 R/3.9K/0805 3137 R/1.65K/0805* 3136 R/22.1K/0805* 1 2 7101A P/SFH615AGR +12VO +3.3V 3152 R/10/1206 5104 L/BEAD 1 2 + 2136 C/470uF/25V 2137 C/NC 2144 C/222K/1KV 2145 C/222K/1KV 1 2 6109 D/P6KE10A 3142 R/10/1206 +12VO 2 3 1 8 4 7106A U/LM358 3127R/33.2K/0805* 3126 R/1K/0805* 1 2 2120 C/104K/0805 5 6 7 7106B U/LM358 +2.5Vref 3122 R/300K/0805 1 2 2121 C/223K/0805 1 2 + 2122 C/1000uF/25V/10*20 PGND GND +12V 3143 R/24/1206 1 2 2128 C/104K/0805 1 2 2129 C/102K/0805 3138 R/1K/0805* B +3.3V 3135 3/R_25mohm 1 2 3160 R/26.1K/0805 1 2 3128 R/0/0805 1 2 6117 D/1N4148 3131 R/0/0805 1 2 + 2139 C/100uF/25V N51 N52 N55 N56 N57 N58 N59 N60 N65 N66 N68 N69 N70 N71 B 1 2 + 2117 C/470uF/25V N54 1 2 3158 R/220/1206 1 2 3159 R/NC 1 2 6110 D/NC 1 2 2108 C/NC 1 2 5105 L/BEAD 2 1 3 1106 1/CN/690671/NC +12VO 3120R/24/1206 3121 R/24/1206 1 2 2133 C/NC 1 2 2134 C/NC 1 2 3 1105 C/CN/20147 1 2 3113 R/NC 1 2 3111 R/10/ 1/2W 1 2 2105 C/102K/1KV 1 2 1101 1/NTC/SCK083 1 2 2103 C/68uF/450V 1 2 3109 R/10/1/8W 1 2 6101 D/1N4007 1 2 2104 C/102K/0805 1 2 2101 C/1000p/400V/Y1 1 2 3118 R/2.2/1206 VDD (L) (N) 3 4 7101B P/SFH615AGR 1 2 2100 C/1000p/400V/Y1 1 2 2102 C/0.33uF/275V/X2 1 2 6103 D/NC 1 2 2111 C/471K/0805 PGND1 1 2 + 2107 C/22uF/35V 1 2 3116 R/NC 3 4 2 1 5100 L/21.0185.60 1 2 5103 9/JUMP 1 2 + 2106 C/NC 1 3 2 7103 Q/STP4NK60ZFP 1 2 3110 R/100/0805 1 2 3119 R/100K/0805 1 2 2110 C/104K/0805 2 1 3 4 6100 B/KBP206G 1 2 3106 R/470K/1206 1 2 3 4 1100 T/2A/250V 1 2 1103 1/HS-25*17 LABEL LABEL L/LABEL 1 2 3105 R/470K/1206 GND 1 FB 2 RI 4 Sense 6 VDD 7 Gate 8 RT 5 VIN 3 7104 7/SG6841 1 2 3107 R/470K/1206 1 2 3104 R/470K/1206 VDD 1 2 3112 R/560K/1206 1 2 3114 R/560K/1206 PGND PGND PGND PGND PGND1 PGND1 PGND1 PGND1 PGND 3103 R/82K/1206 3102 R/NC 1 2 3150 R/3/1206 1 2 3124 R/0/1206 3132 R/560K/1206 1 2 2130 C/NC 1 2 3108 R/8.2/0805 1 2 CP1 C/CP L L_1 L_3 N N_2 VB N02 N03 N04 N05 N06 N09 N11 N12 N14 N15 N16 N17 N18 N20 N21 N23 N25 L_2 3153 R/82K/1206 3154 R/NC 3155 R/82K/1206 3101 R/82K/1206 1 2 3115 R/3/1206 1 2 3117 R/2.2/1206 3129 R/8.2/0805 1 2 CP2 C/CP N24 1 2 6104 D/1N4935 N19 1 2 6102 D/BZM55 B18 N10 N07 1 2 9105 9/JUMP 1 2 9107 9/JUMP 1 2 9108 9/JUMP 1 2 9109 R/0/1206 GND +12VO GND +2.5VREF 1 2 9102 9/JUMP PGND 1 2 9101 9/JUMP PGND1 PGND 1 2 9103 9/JUMP N 1 2 9106 R/0/1206 N17 P063V2-2 P063V2-2.SCH 1 2 3130 R/100K/0805 1 2 3133 R/75K/0805 1 2 3 7102 7/3906 1 2 3134 R/10.5K/0805 1 2 3144 R/15.4K/0805 3156 R/10/1206 N13 N22 2138 C/104K/0805 P063V2-ICT P063V2-ICT.Sch MECH MECH.SCH 22.0926.51 21.0185.51 PCB Rev: 2 12NC:8238 277 17291 http://www.wjel.net 69 Go to cover page 170B6 LCD Power Diagram-4(150B6) 1 2 2822 C/680J/0805 SGND VCC 1 2 2816 C/105K/0805 1 2 3820 R/15K/0805 1 2 3 7804 Q/3904 1 2 3801 R/5.1K/0805 1 2 6804 D/RLZ6.8B 1 2 2821 C/222K/0805 1 2 3818 R/100K/0805 BL_CTL 1 2 + 2810 C/470uF/25V 1 2 3824 R/470K/0805 CLAMP 1 2 1802 1/CN/61193 1 2 1801 1/CN/61193 1 2 2804 C/15pF/3KV FB PANEL_ID BRIGHTNESS VCC 3 2 1 6803 D/BAV99 SGND 1 2 2813 C/681J/0805 1 2 2818 C/103J/0805 1 2 3811 R/680/0805 SGND 1 2 3812 R/22K/0805 +12VO 1 2 2807 C/103J/0805 1 2 3 47k 47k 7801 Q/DTA144EKA 1 2 3 47k 22k 7807 Q/DTC144WKA SGND 1 2 3808 R/26.1K/0805 1 2 3817 R/68K/0805 1 2 2820 C/103J/0805 1 2 2819 C/NC SGND 1 2 2801 C/105K/16V/0805 1 2 3802 R/100/1206 1 2 3819 R/68K/0805 1 2 3816 R/140K/0805 SGND SGND VCC SGND 1 2 3810 R/47K/0805 OLP2 1 2 6806 D/1N4148 1 2 3821 R/680K/0805 1 2 2817 C/223K/0805 OLP2 3 2 1 6802 D/BAV99 1 2 3809 R/1K/0805 12NC:8238 277 17291 T50P063.00 1 2 3806 R/200K/0805 1 2 3813 R/1.5M/0805 1 2 2809 C/103J/0805 SGND SGND FB CLAMP TIMER 5 ON/OFF 6 NOUT2 8 CMP 2 LOAD 3 CTOSC 4 INN 1 GND 7 BIT3193 MODSEL 16 NOUT1 9 VDD 10 PWMOUT 11 CTPWM 12 PWMDC 13 CLAMP 14 ISEN 15 7808 U/BIT3193 1 2 6807 D/4148 1 2 6808 D/1N4148 OLP1 1 2 2812 C/332K/0805 1 2 6805 D/1N4148 1 2 2814 C/105K/0805 1 2 2815 C/104K/0805 SGND 1 2 3822 R/68K/0805* 1 2 3823 R/42.2K/0805 SGND 1 2 3807 R/205K/0805 OUT2 OUT1 OUT1 OUT2 N501 N502 N503 N504 N518 N519 N520 N521 N522 N523 N524 N525 N526 N527 N528 N529 N530 1 2 9801 R/0/0805 SGND 6 2 4 3 5 8 1 9 5801 T/22.0898.89 1 2 2808 C/681K/250V/0805 1 2 3805 R/10/1206 5 6 7 8 1 2 3 4 7809 Q/P5506 1 4 2 3 5804 T/CT SGND OLP1 3 2 1 7805 Q/2N7002 N505 N506 N507 N508 N510 N512 N513 1 2 2803 C/39pF/3KV 1 2 2802 C/39pF/3KV 1 2 9802 9/JUMP 1 2 9803 9/JUMP 1 2 9804 9/JUMP 1 2 9805 9/JUMP 1 2 9806 9/JUMP 1 2 9807 9/JUMP +12VO GND +12VO N515 N527 VCC N509 N511 N514 N515 1 2 9808 9/JUMP CLAMP 1 2 9809 9/JUMP GND 1 2 3804 R/470K/0805 1 2 2805 C/103J/0805 SGND 3 2 1 7802 Q/2N7002 PWMOUT 3 2 1 7803 Q/2N7002 PWMOUT 1 2 3803 R/10K/0805 1 2 2806 C/NC 22.0898.51 PCB Rev: 2 12NC:8238 277 17291 http://www.wjel.net MODEL : AIP-0097 (Spec Rev.No:01) MODEL : AIP-0097 (Spec Rev.No:01) 70 Go to cover page 170B6 LCD Power Board C.B.A-1(150B6) http://www.wjel.net MODEL : AIP-0097 (Spec Rev.No:01) 71 Go to cover page 170B6 LCD Power Board C.B.A-2(150B6) http://www.wjel.net 72 Go to cover page 170B6 LCD Power Board C.B.A-3(150B6) http://www.wjel.net 170B6 LCD 73 Go to cover page 1 20 GENERAL PRODUCT SPECIFICATION HUDSON-6 170B6 GENERAL PRODUCT SPECIFICATION . ANALOG AND DIGITAL DUAL INPUT . AUTO PICTURE ADJUSTMENT . 15 FACTORY PRESET MODES AND 34 PRESET MODES WHICH CAN BE RECOVERED TO PRESET MODES . NEW OSD STYLING DISPLAY FOR MODE IDENTIFICATION /ADJUSTMENT . DDC 2B & DDC/CI COMMUNICATION CAPABILITY . MAX. RESOLUTION 1280*1024 NON-INTERLACED AT 76 HZ . 17 " COLOR TFT LCD FLAT PANEL . EASY TILT & SWIVEL BASE . FULL RANGE POWER SUPPLY 90 - 264 VAC . CE ENVIRONMENTAL POLICY . LEAD-FREE PRODUCT POLICY . ANTI-GLARE TO REDUCE LIGHT REFLECTION . POWER MANAGEMENT CAPABILITY . SOG SUPPORT . TCO 03 . AUDIO SUPPORT . USB PLUG SUPPORT BRAND : PHILIPS 17 inch LCD Monitor TYPE :170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net Go to cover page 74 170B6 LCD 20 2 GENERAL PRODUCT SPECIFICATION(Continued) CONTENTS 1.0 Foreword 2.0 Product profile 2.1 LCD 2.2 Scanning frequencies 2.3 Video dot rate 2.4 Power input 2.5 Power consumption 2.6 Dimensions 2.7 Weight 2.8 Functions 2.9 Ambient temperature 2.10 Regulatory compliance 3.0 Electrical characteristics 3.1 Interface signals 3.2 Interface 3.2.1 D-Sub cable 3.2.2 DVI cable 3.2.3 Audio cable 3.2.4 USB cable 3.2.5 OSD function control 3.3 Timing requirement 3.3.1 Mode storing capacity 3.3.2 Factory/ preset timings 3.3.3 Horizontal scanning 3.3.4 Vertical scanning 3.4 Power input connection 3.5 Power management 3.6 Display identification 3.6.1 Analog DDC 3.6.2 Digital DDC 4.0 Visual characteristics 4.1 Test conditions 4.2 Resolution 4.3 Brightness 4.4 Image size 4.4.1 Actual display size 4.4.2 Max scan size 4.5 Brightness uniformity 4.6 Check cross talk 4.7 White color adjustment 5.0 Mechanical characteristics 5.1 Controls 5.2 Unit dimension / weight 5.3 Tilt and swivel base 5.4 Transportation packages 5.4.1 Shipping dimension / weight 5.4.2 Block unit / palletization 6.0 Environmental characteristics 6.1 Susceptibility of display to external environment 6.2 Transportation tests 6.3 Display disturbances from external environment 6.4 Display disturbances to external environment 6.4.1 EMI 7.0 Reliability 7.1 Mean time between failures BRAND : PHILIPS 17 inch LCD Monitor TYPE : 170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net 170B6 LCD 75 Go to cover page 3 20 8.0 Quality assurance requirements 8.1 Acceptance test 9.0 Serviceability 10.0 Philips Flat panel monitors pixel defect policy 1.0 FOREWORD This specification describes a 17" SXGA multi-scan color TFT-LCD monitor with max resolution up to 1280*1024 /76 Hz non-interlaced. 2.0 PRODUCT PROFILE This display monitor unit is a color display monitor enclosed in PHILIPS global styling cabinet, which has an integrated tilt and swivel base. 2.1 LCD 2.1.1 Type NR. : LM170E01-A6 Number of Pixels. : 1280 (H) x1024 (V) Physical Size. : 358.5(w)�296.5(h)�17(d) mm Pixel Pitch. : 0.264 mm x 0.264 mm Color pixel arrangement. : RGB vertical stripes Support Color. : 16.2M colors Display Mode. : Normally White Backlight. : CCFL edge light system Active area. (WXH). : 337.92 x 270.336mm (17" diagonal) Viewing Angle (CR>=10). : Vertical 140 degree, Horizontal 140 degree (Typ.) Contrast ratio. : 500:1 White luminance. : 250nits (Typ.) 2.1.2 Type NR. : QD17EL0709 Number of Pixels. : 1280 (H) x1024 (V) Physical Size. : 358.5(w)�296.5(h)�17.5(d) mm Pixel Pitch. : 0.264 mm x 0.264 mm Color pixel arrangement. : RGB vertical stripes Support Color. : 16.2M colors Display Mode. : Normally White Backlight. : CCFL edge light system Active area. (WXH). : 337.9 x 270.3 mm (17" diagonal) Viewing Angle (CR>=10). : Vertical 125 degree, Horizontal 140 degree (Typ.) Contrast ratio. : 500:1 White luminance. : 260nits (Typ.) 2.1.3 Type NR. : CLAA170EA07 Number of Pixels. : 1280 (H) x1024 (V) Physical Size. : 358.5(w)�296.5(h)�17.5(d) mm Pixel Pitch. : 0.264 mm x 0.264 mm Color pixel arrangement. : RGB vertical stripes Support Color. : 16.2M colors Display Mode. : Normally White Backlight. : CCFL edge light system Active area. (WXH). : 337.92 x 270.336 mm (17" diagonal) Viewing Angle (CR>=10). : Vertical 130 degree, Horizontal 140 degree (Typ.) Contrast ratio. : 500:1 White luminance. : 300nits (Typ.) GENERAL PRODUCT SPECIFICATION(Continued) BRAND : PHILIPS 17 inch LCD Monitor TYPE :170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net Go to cover page 76 170B6 LCD 20 4 GENERAL PRODUCT SPECIFICATION(Continued) 2.2 Scanning frequencies H-Frequency. : 30K 83 KHz V-Frequency. : 56 - 76 Hz 2.3 Video dot rate. : < 140 MHz 2.4 Power input. : 90-264 V AC, 50/60 � 2 Hz 2.5 Power consumption. : < 35 W maximum (without audio) : < 45 W maximum (with audio) 2.6 Dimensions. : 375(W) * 431(H) * 210(D) mm 2.7 Weight. : 5.62 kg 2.8 Functions: (1) D-Sub analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level, SOG sync. (2) DVI-D digital Panel Link TMDS input 2.9 Ambient temperature: 5 �C - 40 �C 2.10 Regulatory compliance: Safety B, CCIB / CCEE(China), CE(Europe), CSA(Canada), DEMKO(Nordic), EZU(Czech), FIMKO(Nordic), Gost(Russia), IEC 950 CB Report, NOM NYCE(Mexico), PSB(Singapore), SEMKO(Nordic),SISIR CPA(Singapore), TUV(Germany), UL(USA), * UL2601-1(NAFTA), EN60601(EU) and IEC60601-1(WW) EMI C-tick, CE(Europe), FCC(USA), IC(Canada), VCCI(Japan),BSMI, *IEC60601-1-2 (EU) Ergonomics E2000, MPRII(Sweden), Nutek(Sweden), TCO99, TCO03, TUV/GS, TUV/ERG, EPA, ISO13406-2 Compatibility PC2001, Windows 2000, Windows 98/Me, Windows XP, NSTL * Medical compliance only applies for dedicated models. 3.0 Electrical characteristics 3.1 Interface signals There are two main display interface input signals (D-sub and DVI-D) including the additional peripheral interface inputs (Audio & USB): 1). D-shell Analog Input signal: Video, H-sync, V-sync, Video: 0.7 V p-p, input impedance, 75 ohm Sync. : Separate sync TTL level, input impedance 2k2 ohm terminate H-sync Positive/Negative V-sync Positive/Negative Composite sync TTL level, input impedance 2k2 ohm terminate (Positive/Negative) Sync on green video 0.3V p-p Negative. (Video 0.7 V p-p Positive) 2). DVI-D Digital Input signal: Single TMDS link (Three channels: RX0-/+, RX1-/+, RX2-/+) BRAND : PHILIPS 17 inch LCD Monitor TYPE : 170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net 170B6 LCD 77 Go to cover page 5 20 GENERAL PRODUCT SPECIFICATION(Continued) 3). Audio Input signal: 500mVrms Loudspeaker (Impedance: 16 Ohm +/-15%): 2W+2W stereo for RMS Power Frequency range: 320Hz - 13KHz Headphone connection will mute speakers 4). USB Adaptor Input signal: Upstream input (VBUS, D+, D-, GND) via USB-B receptacle. Output signal: Downstream output (VBUS, D+, D-, GND) through USB-A receptacle 3.2 Interface 3.2.1 D-Sub Cable Length. : 1.5 M +/- 50 mm Connector type. : D-Sub male with DDC-2B pin assignments. Blue connector thumb-operated jackscrews Pin Assignment: 3.2.2 DVI Cable The input signals are applied to the display through DVI-D cable. Length. : 1.8 M +/- 50 mm Connector type. : DVI-D male with DDC-2B pin assignments White connector thumb-operated jackscrews Pin Assignment: PIN No. SIGNAL 1 Red video input 2 Green video input / sync on green 3 Blue video input 4 GND 5 GND- Cable detect 6 Red video GND 7 Green video GND 8 Blue video GND 9 DDC +3.3V or +5V 10 Logic GND 11 GND 12 Serial data line (SDA) 13 H-sync / H+V 14 V-sync 15 Data clock line (SCL) BRAND : PHILIPS 17 inch LCD Monitor TYPE :170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net Go to cover page 78 170B6 LCD 20 6 GENERAL PRODUCT SPECIFICATION(Continued) Pin No. Description 1 T.M.D.S. data2- 2 T.M.D.S. data2+ 3 T.M.D.S. data2 shield 4 No Connect 5 No Connect 6 DDC clock 7 DDC data 8 No Connect 9 T.M.D.S. data1- 10 T.M.D.S. data1+ 11 T.M.D.S. data1 shield 12 No Connect 13 No Connect 14 +5V Power 15 Ground (for +5V) - Cable detect 16 Hot plug detect 17 T.M.D.S. data0- 18 T.M.D.S. data0+ 19 T.M.D.S. data0 shield 20 No Connect 21 No Connect 22 T.M.D.S clock shield 23 T.M.D.S. clock+ 24 T.M.D.S. clock- 3.2.3 Audio Cable Length. : 1.8 M +/- 50 mm Connector type. : 3.5-mini jack with lime color on the both end. 3.2.4 USB Cable (High Full Speed) Length. : 1.8 M +/- 50 mm (Max.) Connector type. : USB- B Plug (Input) USB- A Plug (Output) Pin Assignment: Pin No. Description 1 VBUS 2 Data+ 3 Data- 4 GND 3.2.5 Software control functions via OSD/control OSD (On Screen Display) function (1) Analog interface OSD: Adjustable functions: BRAND : PHILIPS 17 inch LCD Monitor TYPE : 170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net 170B6 LCD 79 Go to cover page 7 20 GENERAL PRODUCT SPECIFICATION(Continued) 1. Main Menu 2.1 Sub Menu 2.2 Sub Menu 2 MONITOR SETUP Exit Brightness & Contrast Brightness, Contrast Color Original Color, 9300K,6500K, sRGB User Define Red, Green, Blue Position Horizontal, Vertical Input Selection Analog, Digital More Settings Language English, Spanish, French, German, Italian, S. Chinese Phase/ Clock Phase, Clock OSD Setting Horizontal, Vertical Audio Option Stand-alone (On, Off) Mute (On, Off) Reset No, Yes Serial No.: (Serial No.) (Timing Mode) Move Selection Then ok (2) Digital interface OSD: Adjustable functions: 1. Main Menu 2.1 Sub Menu 2.2 Sub Menu 2 MONITOR SETUP Exit Brightness & Contrast Brightness, Contrast Color Original Color, 9300K,6500K, sRGB User Define Red, Green, Blue Position (Gray out) Input Selection Analog, Digital More Settings Language, English, Spanish, French, German, Italian, S.Chinese Phase/ Clock (Gray out) Phase, Clock (Gray out) OSD Setting Horizontal, Vertical Audio Option Stand-alone (On, Off) Mute (On, Off) Reset No, Yes Serial No.: (Serial No.) (Timing Mode) Move Selection Then ok BRAND : PHILIPS 17 inch LCD Monitor TYPE :170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net Go to cover page 80 170B6 LCD 20 8 GENERAL PRODUCT SPECIFICATION(Continued) Remark: Audio Selection - Stand-alone - On: Isolate video and audio control input Stand-alone - Off: Integrate video and audio control input Mute - On: Turn off Audio input Mute - Off: Turn on Audio input Reset - No: Exit Yes: Auto adjustment for displaying timing mode and recall factory preset 3.3 Timing requirement 3.3.1 Mode storing capacity (1) Factory preset modes. : 15 (2) Preset modes. : 34 3.3.2 Factory/ Preset timings The factory settings of size and centering are according to the reference timing charts (See as below) MODE NO. 1 2 3 4 RESOLUTION 640 x 350 720 x 400 640 x 480 640 x 480 Dot clock(MHz) 25.175 28.321 25.175 30.24 f h 31.469kHz 31.468kHz 31.5kHz 35 kHz A ( us ) 31.778(800 dots) 31.78(900dots) 31.778(800 dots) 28.571 (864 dots) B ( us ) 3.813(96 dots) 3.813(108dots) 3.813( 96 dots) 2.116 ( 64 dots) C ( us ) 1.907(48 dots) 1.907(54dots) 1.907( 48 dots) 3.175( 96 dots) D ( us ) 25.422(640 dots) 25.42(720dots) 25.422( 640 dots) 21.164( 640 dots) E ( us ) 0.636(16 dots) 0.636(18dots) 0.636( 16 dots) 2.116( 64 dots) f v 70Hz(70.09) 70Hz(70.085) 60Hz 67Hz O (ms ) 14.27(449 lines) 14.27(449 lines) 16.683 (525 lines) 15 (525 lines) P ( ms ) 0.064(2 lines) 0.064(2 lines) 0.064 ( 2 lines) 0.086( 3 lines) Q (ms ) 1.907(60 lines) 1.112(34 lines) 1.049 ( 33 lines) 1.114( 39 lines) R ( ms ) 11.12(350 lines) 12.71(400 lines) 15.253 (480 lines) 13.714(480 lines) S ( ms ) 1.175(37 lines) 0.381(13 lines) 0.317 ( 10 line ) 0.086( 3 line ) SYNC. H/V +/- -/+ - / - - / - POLARITY SEP . SYNC Y Y Y Y MODE NO. 5 6 7 8 RESOLUTION 640 x 480 640 x 480 640x480 800 x 600 Dot clock(MHz) 31.500 31.501 36 36 f h 37.861kHz 37.5kHz 36kHz 35.2kHz A ( us ) 26.413(832 dots) 26.667 (840 dots) 23.111 (832 dots) 28.444(1024 dots) B ( us ) 1.270(40 dots) 2.032 ( 54 dots) 1.556 (56 dots) 2.000 ( 72 dots) C ( us ) 3.810(120 dots) 3.81 ( 120 dots) 2.222 ( 80 dots) 3.556 ( 128 dots) D ( us ) 20.317(640 dots) 20.317 (640 dots) 17.778 (640 dots) 22.222( 800 dots) E ( us ) 1.016(32 dots) 0.508 ( 26 dots) 1.555 (56 dots) 0.666 ( 24 dots) f v 72.809Hz 75Hz 85Hz 56Hz O (ms ) 13.735(520 lines) 13.333(500 lines ) 11.763 (509 lines ) 17.778 (625 lines) P ( ms ) 0.079(3 lines) 0.08(3 lines ) 0.069 ( 3 lines ) 0.057 ( 2 lines) Q (ms ) 0.528(20 lines) 0.427 ( 16 lines ) 0.578 ( 25 lines ) 0.626 ( 22 lines) R ( ms ) 12.678(480 lines) 12.8 (480 lines ) 11.093 (480 lines ) 17.066 (600 lines) S ( ms ) 0.45(17 lines) 0.026(1 lines) 0.023(1 lines) 0.029 ( 1 line ) SYNC. H/V -/- - / - -/- + / + POLARITY SEP . SYNC Y Y Y Y BRAND : PHILIPS 17 inch LCD Monitor TYPE : 170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net 170B6 LCD 81 Go to cover page 9 20 GENERAL PRODUCT SPECIFICATION(Continued) MODE NO. 9 10 11 12 RESOLUTION 800 x 600 800 x 600 800 x 600 800 x 600 Dot clock(MHz) 40 50 49.498 56.251 f h 37.9kHz 48.077kHz 46.9kHz 53.7kHz A ( us ) 26.4 (1056 dots) 20.80 (1040dots) 21.333 (1056 dots) 18.631 (1048 dots) B ( us ) 3.2 ( 128 dots) 2.400 ( 120 dots) 1.616 ( 80 dots) 1.138 ( 64 dots) C ( us ) 2.2 ( 88 dots) 1.280 ( 64 dots) 3.232 ( 160 dots) 2.702 ( 152 dots) D ( us ) 20 ( 800 dots) 16.00 ( 800 dots) 16.162 ( 800 dots) 14.222 ( 800 dots) E ( us ) 1 ( 40 dots) 1.120 ( 56 dots) 0.323 ( 16 dots) 0.569 ( 32 dots) f v 60Hz 72Hz ( 72.188) 75Hz 85Hz O (ms ) 16.579 (628 lines) 13.85 (666 lines) 13.333 (625 lines) 11.756(631 lines) P ( ms ) 0.106 ( 4 lines) 0.125 ( 6 lines) 0.064 ( 3 lines) 0.056 ( 3 lines) Q (ms ) 0.607 ( 23 lines) 0.478 ( 23 lines) 0.448 ( 21 lines) 0.503 ( 27 lines) R ( ms ) 15.84 (600lines) 12.48 (600 lines) 12.8 (600 lines) 11.179 (600 lines) S ( ms ) 0.026 ( 1 line ) 0.770 ( 37 line ) 0.021 ( 1 line ) 0.018 ( 1 lines) SYNC. H/V + / + + / + + / + + / + POLARITY SEP . SYNC Y Y Y Y MODE NO. 13 14 15 16 RESOLUTION 832 x 624 1024 x 768 1024 x 768 1024 x 768 Dot clock(MHz) 57.28 65 75 78.75 f h 49.7kHz 48.363kHz 56.5kHz 60kHz A ( us ) 20.11(1152 dots) 20.677(1344 dots) 17.707(1328 dots) 16.66 (1312dots) B ( us ) 1.117(64 dots) 2.092(136 dots) 1.813(136 dots) 1.219 ( 96 dots) C ( us ) 3.91(224 dots) 2.462(160 dots) 1.920(144 dots) 2.235 ( 176 dots) D ( us ) 14.52(832 dots) 15.754(1024 dots) 13.653(1024 dots) 13.003 ( 1024 dots) E ( us ) 0.563(32 dots) 0.369(24 dots) 0.321 (24 dots) 0.203 ( 16 dots) f v 75Hz 60.004Hz 70.004Hz 75Hz ( 75.000) O (ms ) 13.41(667 lines) 16.666(806 lines) 14.272(806 lines) 13.328 (800 lines) P ( ms ) 0.06(3 lines) 0.124(6 lines) 0.106(6 lines) 0.05( 3 lines) Q (ms ) 0.784(39 lines) 0.600(29 lines) 0.514(29 lines) 0.446 ( 28 lines) R ( ms ) 12.55(624 lines) 15.880(768 lines) 13.599(768 lines) 12.80 (768 lines) S ( ms ) 0.016(1 lines) 0.062(3 lines) 0.053(3 lines) 0.017 ( 1 line ) SYNC. H/V +/+ - / - -/- + / + POLARITY SEP . SYNC Y Y Y Y MODE NO. 17 18 19 20 RESOLUTION 1024 x 768 1024 x 768 1152 x 864 1152 x 864 Dot clock(MHz) 83.096 94.5 79.9 94.5 f h 61.1kHz 68.7kHz 54.0kHz 63.9kHz A ( us ) 16.367 (1360dots) 14.561 (1376 dots) 18.523(1480 dots) 15.661(1480 dots) B ( us ) 1.348 ( 112 dots) 1.016 ( 96 dots) 1.952(156 dots) 1.016(96 dots) C ( us ) 2.022 ( 168 dots) 2.201 ( 208 dots) 1.352(108 dots) 1.116(105 dots) D ( us ) 12.323 ( 1024 dots) 10.836 ( 1024 dots) 14.418(1152 dots) 12.19(1152 dots) E ( us ) 0.674 ( 56 dots) 0.508 ( 48 dots) 0.801(64 dots) 1.339(127 dots) f v 76Hz 85Hz 60Hz 70Hz O (ms ) 13.142 (803 lines) 11.765 (808 lines) 16.671(900lines) 14.283(912lines) P ( ms ) 0.049 ( 3 lines) 0.044 ( 3 lines) 0.148(8 lines) 0.047(3lines) Q (ms ) 0.507 ( 31 lines) 0.524 ( 36 lines) 0.445(24 lines) 0.689(44 lines) R ( ms ) 12.57 (768 lines) 11.183 (768lines) 16.004(864 lines) 13.531(864 lines) S ( ms ) 0.016 ( 1 line ) 0.014 ( 1 line ) 0.074(4 lines) 0.016(1 lines) SYNC. H/V + / + + / + +/+ +/+ POLARITY SEP . SYNC Y Y Y Y BRAND : PHILIPS 17 inch LCD Monitor TYPE :170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net Go to cover page 82 170B6 LCD 20 10 GENERAL PRODUCT SPECIFICATION(Continued) MODE NO. 21 22 23 24 RESOLUTION 1152 x 864 1152 x 870 1152 x 900 1152 x 900 Dot clock(MHz) 108 100 94.5 108 f h 67.5kHz 68.7kHz 61.8kHz 71.8kHz A ( us ) 14.815 (1600 dots) 14.56 (1456 dots) 16.169 (1528 dots) 13.926 (1054dots) B ( us ) 1.185 ( 128 dots) 1.28 ( 128 dots) 1.354 ( 128 dots) 1.185 ( 128 dots) C ( us ) 2.37 ( 256 dots) 1.44( 144 dots) 2.201 ( 208 dots) 1.778 ( 192 dots) D ( us ) 10.667 ( 1152 dots) 11.52 ( 1152 dots) 12.19 ( 1152 dots) 10.667 ( 1152 dots) E ( us ) 0.593 ( 64 dots) 0.32 ( 32 dots) 0.424 ( 40 dots) 0.296 ( 32 dots) f v 75Hz 75Hz 66Hz 76Hz O (ms ) 13.333 (900 lines) 13.333 (916 lines) 15.151 (937lines) 13.132 (943 lines) P ( ms ) 0.044 ( 3 lines) 0.044 ( 3 lines) 0.065 ( 4 lines) 0.111 ( 8 lines) Q (ms ) 0.474 ( 32 lines) 0.568( 39 lines) 0.501 ( 31 lines) 0.46 ( 33 lines) R ( ms ) 12.8 (864 lines) 12.678 (870 lines) 14.552 (900lines) 12.533 (900 lines) S ( ms ) 0.015 ( 1 lines) 0.043 ( 4 line ) 0.033 ( 2 line ) 0.028 ( 2 lines) SYNC. H/V - / - - / - Serr- + / + POLARITY SEP . SYNC Y Y Y Y MODE NO. 25 26 27 28 RESOLUTION 1280 x 960 1280 x 960 1280 x 1024 1280 x 1024 Dot clock(MHz) 108 129.895 108 117 f h 60kHz 75kHz 64kHz 71.7kHz A ( us ) 16.667(1800 dots) 13.307 (1728 dots) 15.63 (1688 dots) 13.949 (1632 dots) B ( us ) 1.037(112 dots) 1.047 ( 136 dots) 1.037 ( 112 dots) 0.957 (112 dots) C ( us ) 2.889(312 dots) 1.725 ( 224 dots) 2.296 ( 248 dots) 1.915 (224 dots) D ( us ) 11.852(1280 dots) 9.857 ( 1280 dots) 11.852 ( 1280 dots) 10.94 (1280 dots) E ( us ) 0.889(96 dots) 0.678 ( 88 dots) 0.445 ( 48 dots) 0.137 (16 dots) f v 60Hz 75Hz 60Hz 67Hz O (ms ) 16.667(1000 lines) 13.333 (1002 lines) 16.661 (1066 lines) 14.883 (1067lines) P ( ms ) 0.05(3 lines) 0.039 ( 3 lines) 0.047 ( 3 lines) 0.112 ( 8 lines) Q (ms ) 0.600(36 lines) 0.48 ( 36 lines) 0.594 ( 38 lines) 0.46 ( 33 lines) R ( ms ) 16(960 lines) 12.774 (960 lines) 16.005 (1024 lines) 14.283 (1024 lines) S ( ms ) 0.017(1 lines) 0.04 ( 3 lines ) 0.015 ( 1 line) 0.028 (2 lines ) SYNC. H/V +/+ + / + + / + + / + POLARITY SEP . SYNC Y Y Y Y MODE NO. 29 30 31 32 RESOLUTION 1280 x 1024 1280 x 1024 1280 x 1024 688 x 556 Dot clock(MHz) 130.223 135 138.008 27 F h 76kHz 80kHz 81.1kHz 31.25kHz A ( us ) 13.158 (1712 dots) 12.504(1688 dots) 12.326 (1664 dots) 32 (864 dots) B ( us ) 1.024 ( 133 dots) 1.067(144 dots) 0.474 (64 dots) 3.852 (104 dots) C ( us ) 1.905 ( 248 dots) 1.837(248 dots) 2.133 (288 dots) 1.778 (48 dots) D ( us ) 9.83 ( 1280 dots) 9.481(1280 dots) 9.481 (1280 dots) 25.481 (688 dots) E ( us ) 0.399( 51 dots) 0.119(16 dots) 0.238 (32 dots) 0.889 (24 dots) F v 72Hz 75Hz 76Hz 50Hz O (ms ) 14 (1064 lines) 13.329(1066 lines) 13.139 (1066 lines) 20 (625 lines) P ( ms ) 0.02 ( 2 lines) 0.038(3 lines) 0.099 ( 8 lines) 0.128 (4 lines) Q (ms ) 0.5 ( 38 lines) 0.475(38 lines) 0.394 ( 32 lines) 1.408 (44 lines) R ( ms ) 13.468 (1024 lines) 12.804(1024 lines) 12.622 (1024 lines) 17.972 (556 lines) S ( ms ) 0.012 ( 0 line) 0.012 (1 line) 0.024( 2 lines ) 0.672 ( 21 lines ) SYNC. H/V + / + +/+ - / - -/ + POLARITY SEP . SYNC Y Y Y Y BRAND : PHILIPS 17 inch LCD Monitor TYPE : 170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net 170B6 LCD 83 Go to cover page 11 20 GENERAL PRODUCT SPECIFICATION(Continued) MODE NO. 33 34 RESOLUTION 960X720 960X720 Dot clock(MHz) 57.58 72.42 F h 44.76kHz 56.4kHz A ( us ) 22.34(1286 dots) 17.73(1284 dots) B ( us ) 1.72(99 dots) 1.44(104 dots) C ( us ) 2.58(148 dots) 2.21(160 dots) D ( us ) 16.67(960 dots) 13.256(960 dots) E ( us ) 0.856(49 dots) 0.780(56 dots) F v 60Hz 75Hz O (ms ) 16.667(746 lines) 13.333(752 lines) P ( ms ) 0.067(2.9 lines) 0.053(3 lines) Q (ms ) 0.495(22 lines) 0.5(28 lines) R ( ms ) 16.081(720 lines) 12.766(720 lines) S ( ms ) 0.0228(1 lines) 0.0184(1 lines) SYNC. H/V -/ + -/ + POLARITY SEP . SYNC Y Y A : H-Total O : V-Total B : H- Sync width P : V- Sync width C : H- Back porch Q : V- Back porch D : H- Video width R : V- Video width E : H- Front porch S : V- Front porch 3.3.3 Horizontal scanning Sync polarity. : Positive or Negative Scanning frequency. : 30 - 83 KHz 3.3.4 Vertical scanning Sync polarity. : Positive or Negative Scanning frequency. : 56 - 76 Hz 3.4 Power input connection Power-cord length. : 1.5 M Power-cord type. : 3 leads power cord with protective earth plug. 3.5 Power management The power consumption and the status indication of the set with power management function are as below: 1) DPMS for Analog signal. According to VESA power saving signal. TCO’03 power saving requirement, EPA energy star requirement. Status H-sync V-sync Video Power LED On On On Active <45W Green /With Audio On On On Active <35W Green / Without Audio Stand-by Off On Blanked <1W Amber Suspend On Off Blanked <1W Amber Off Off Off Blanked <1W Amber DC Power off N/A <1W Off BRAND : PHILIPS 17 inch LCD Monitor TYPE :170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net Go to cover page 84 170B6 LCD 20 12 GENERAL PRODUCT SPECIFICATION(Continued) 2) DMPM for Digital signal According to DDWG standard for DVI rev.1.0 Status DE Video Power LED On On Active <45W Green /With Audio On On Active <35W Green /Without Audio Off Off Blanked <1W Amber DC Power off N/A <1W Off 3.6 Display identification 3.6.1 In accordance with VESA Display Channel Standard V1.0 and having DDC-2B and DDC/CI capability. 3.6.2 In accordance with DVI requirement (DDWG digital Visual Interface revision 1.0) use DDC-2B, DDC/CI, and EDID 3.0 structure 2.0 4.0 Visual characteristics 4.1 Test conditions Unless otherwise specified, this specification is defined under the following conditions. (1) Input signal: As defined in 3.3, 1280 x 1024 non-interlaced mode (80K/75Hz), signal sources must have 75 ohm output impedance. (2) Luminance setting: controls to be set to 200 nits with full screen 70 % duty cycle white signal (3) Warm up: more than 30 minutes after power on with signal supplied. (4) Ambient light: 400 -- 600 lux. (5) Ambient temperature: 20 � 5 �C 4.2 Resolution Factory preset modes (15 modes) # Resolution H-Frequency Pixel rate V-Frequency Comment 1 640X350 31.5KHz 25.175 70Hz IBM VGA 10h 2 720X400 31.5KHz 28.322 70Hz IBM VGA 3h 3 640X480 37.5KHz 31.501 75Hz 4 640X480 35.0KHz 30.24 67Hz 5 640X480 31.5KHz 25.175 60Hz 6 800X600 35.2KHz 36 56Hz 7 800X600 46.9KHz 49.498 75Hz 8 800X600 37.9KHz 40 60Hz 9 832X624 49.7KHz 57.28 75Hz MAC 10 1024X768 60.0KHz 78.75 75Hz BRAND : PHILIPS 17 inch LCD Monitor TYPE : 170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net 170B6 LCD 85 Go to cover page 13 20 GENERAL PRODUCT SPECIFICATION(Continued) 11 1024X768 48.4KHz 65 60Hz 12 1152X870 68.7KHz 100 75Hz MAC 13 1152X900 71.8KHz 108 76Hz SUN Mode II 14 1280X1024 64.0KHz 108 60Hz 15 1280X1024 80.0KHz 135 75Hz Note: 1. Screen displays perfect picture at 15 factory-preset modes. 2. Screen displays visible picture with OSD warning when input modes are other then 34 preset modes 4.3 Brightness: 200 nits (at panel color temperature, Screen center point, Fig. 1) 4.4 Image size 4.4.1 Actual display size 338x270mm 4.5 Brightness uniformity Set contrast at 50% and turn the brightness to get average above 200 nits at center of the screen. Apply the Fig 1. It should comply with the following formula: Minimum luminance of nine points (brightness) >= 0.75 (Min) Maximum luminance of nine points (brightness) 4.6 Check Cross talk (S) Apply Pattern 2. Set contrast at 50 % and brightness at 100 %. Measure A. Then output Pattern 3 and measure A . The cross talk value: ABS ( A - A ) ��������� X 100 % < 1.5 % (Max) A 4.7 White color adjustment There are three factory preset white color 9300K, 6500K, sRGB. Apply full white pattern, with brightness in 100 % position and the contrast control at 50 % position. The 1931 CIE Chromaticity (color triangle) diagram (x,y) coordinate for the screen center should be: 9300K CIE coordinates X = 0.283 � 0.020 Y = 0.297 � 0.020 6500K CIE coordinates X = 0.313 � 0.020 Y = 0.329 � 0.020 sRGB CIE coordinates X = 0.313 � 0.008 Y = 0.329 � 0.008 5.0 Mechanical characteristics 5.1 Controls Front. : DC power switch OSD function key BRAND : PHILIPS 17 inch LCD Monitor TYPE :170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net Go to cover page 86 170B6 LCD 20 14 GENERAL PRODUCT SPECIFICATION(Continued) UP/DOWN (Brightness key) LEFT/RIGHT (Volume key) Auto key Rear. : Video signal connector DVI signal connector Audio signal & Earphone connector USB-B receptacle (Input) Power cord socket Left. : USB-A receptacle (Output) 5.2 Unit dimension / Weight Set dimension (incl. pedestal). : 375(W) * 431(H) * 210(D) mm Net weight. : 4.6 kg 5.3 Tilt and swivel base Basic base: Tilt angle: -5 � to +25 � Swivel rotation: � 125 � 5.4 Transportation packages 5.4.1 Shipping dimension/Weight Carton dimension. : 444(W) * 493(H) * 149(H) mm Gross weight. : 5.62 Kg 5.4.2 Block unit / Palletization Basic Base: layers / block sets/layer sets/block unit A 15/B 15; A14/B14 6/4 A 90/B 60; A84/B56 Blocks/container 20 feet 40 feet 4;1 11;1 6.0 Environmental characteristics The following sections define the interference and susceptibility condition limits that might occur between external environment and the display device. 6.1 Susceptibility of display to external environment Operating - Temperature. : 5 to 40 degree C - Humidity. : 80% max - Altitude. : 0 to 12,000 feet Storage - Temperature. : -20 to 60 degree C - Humidity. : 95% max - Altitude. : 0 to 30,000 feet Note: recommended at 5 to 35�C, Humidity less than 60 % BRAND : PHILIPS 17 inch LCD Monitor TYPE : 170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net 170B6 LCD 87 Go to cover page 15 20 GENERAL PRODUCT SPECIFICATION(Continued) 6.2 Transportation tests Standard Philips UAN-D1400 NSTA Height 76.0 cm 76.0 cm 1 corner 1 corner Drop Sequence 3 edges 3 edges Test (Room temp) 6 faces (Room temp) 6 faces Electrical function ok Test Mechanical function ok Result No serious damage on set appearance (Room temp 20�C~23�C, humidity 40%~65%) (1) PACKAGING Sequence 5~500 Hz, 0.73 Grms,Truck spectrum 30 min (2) OPERATING Vibration 10-55-10, 0.35 mm amplitude, 30 min. /axis. 3axes Test Test Electrical function ok Result Mechanical function ok No serious damage on set appearance 6.3 Display disturbances from external environment According to IEC 801-2 for ESD disturbances 6.4 Display disturbances to external environment 6.4.1 EMI EMI: FCC, VCCI, CE, C-Tick, MPRIII, BCIQ, IC, BSMI, *IEC60601-1-2 (EU) * Medical compliance only applies for dedicated models. 7.0 Reliability 7.1. Mean Time Between Failures System MTBF (Excluding the LCD panel and CCFL): 50,000 hrs CCFL MTBF: 30,000 hrs (50% of original brightness) 8.0 Quality assurance requirements 8.1 Acceptance test According to MIL-STD-105D Control II level AQL: 0.65 (major) 2.50 (minor) (Please also refer to annual quality agreement) Customer acceptance criteria: UAW0377/00 9.0 Serviceability The serviceability of this monitor should fulfill the requirements, which are prescribed in UAW-0346 and must be checked with the checklist UAT-0361. BRAND : PHILIPS 17 inch LCD Monitor TYPE :170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net Go to cover page 88 170B6 LCD 20 16 GENERAL PRODUCT SPECIFICATION(Continued) 10.0 Philips Flat Panel Monitors Pixel Defect Policy BRIGHT DOT DEFECTS ACCEPTABLE LEVEL MODEL 170P6 170B6 170S6 1 lit subpixel 0 0 4 or fewer 2 adjacent lit subpixels 0 0 2 or fewer 3 adjacent lit subpixels ( one white pixel) 0 0 0 Distance between two bright dot defects* 0 0 15 mm or more Total bright dot defects of all types 0 0 4 or fewer BLACK DOT DEFECTS ACCEPTABLE LEVEL MODEL 170P6 170B6 170S6 1 dark subpixel 0 0 4 or fewer 2 adjacent dark subpixels 0 0 2 or fewer 3 adjacent dark subpixels 0 0 0 Distance between two black dot defects* 0 0 15 mm or more Total black dot defects of all types 0 0 4 or fewer TOTAL DOT DEFECTS ACCEPTABLE LEVEL MODEL 170P6 170B6 170S6 Total bright or black dot defects of all types 0 0 5 or fewer Note: *Bright dot: Each pixel is comprised three sub-pixels or dots, one red, one green and one blue. BRAND : PHILIPS 17 inch LCD Monitor TYPE : 170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net 170B6 LCD 89 Go to cover page 17 20 GENERAL PRODUCT SPECIFICATION(Continued) A bright dot is a sub-pixel that stands out on the screen when the monitor displays a dark pattern. A red or blue bright dot is more than 50 percent brighter than neighboring dots; a green bright dot is 30 percent brighter than neighboring dots. *Dark dot: A dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern. * 1 or 2 adjacent sub pixel defects = 1 dot defect All Philips monitors are ISO13406-2 Compliant Fig 1: Brightness and Uniformity 1 2 3 7 8 W/10 L W L/10 L/2 W/2 4 5 6 9 Position 5 = Screen center point BRAND : PHILIPS 17 inch LCD Monitor TYPE :170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net Go to cover page 90 170B6 LCD 20 18 GENERAL PRODUCT SPECIFICATION(Continued) Fig 2: Cross talk pattern Gray level 184 (256 Gray level) B 1/2 1/6 1/2 A 1/6 Fig 3: Cross talk pattern Center at Gray level 0 (Black) B’ 1/6 1/2 1/6 1/3 1/3 1/3 1/3 1/2 A’ 1/3 BRAND : PHILIPS 17 inch LCD Monitor TYPE : 170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net 170B6 LCD 91 Go to cover page 19 20 GENERAL PRODUCT SPECIFICATION(Continued) D VIDEO C E SEPARATE SYNC. HORIZONTAL B A R VIDEO Q S P O D VIDEO C E B A VERTICAL HORIZONTAL COMPOSITE SYNC. FIG-4 TIMING CHART -1 BRAND : PHILIPS 17 inch LCD Monitor TYPE :170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net Go to cover page 92 170B6 LCD 20 20 GENERAL PRODUCT SPECIFICATION(Continued) D VIDEO C E B A VERTICAL COMPOSITE SYNC. FIG-5 TIMING CHART -2 O P Q R S & VIDEO B S P Q O R ( SYNC. ON GREEN ) HORIZONTAL VERTICAL BRAND : PHILIPS 17 inch LCD Monitor TYPE : 170B6CG/00 8639 000 16159 2004-12-24 2004-12-24 590 Peter V. http://www.wjel.net 93 Go to cover page 170B6 LCD Exploded View 313810440571 HOUSING COVER 90 313815861771 USB ASSY 1054 313815758571 BACK COVER ASSY 40 313815411602 HINGE COVER(T) 101 313815755861 COMPACT BASE(T) 50 313815861731 AUDIO + CTL ASSY 1052 313815861751 SCALER ASSY 1051 823827717111 LIPS(AIP-0093) 1055 313815861941 FRAME+WIRE ASSY 1057 823827717631 TFT-LCD MOD QD170EL07 REV.09 1050 313815758541 BEZEL ASSY(T) 30 http://www.wjel.net 94 Go to cover page 170B6 LCD Spare Parts List(170B6) Model: 170B6CG/00(QDI) 12NC: 8639 000 16159 Mechanical Parts 30 313815758541 BEZEL ASSY(T) 31 313815415271 BEZEL(T) 32 313815411571 POWER BUTTON 33 313815411541 CONTROL BUTTON 34 313815411561 POWER LENS 35 313815412691 DECO STRIP 40 313815758571 BACK COVER ASSY 41 313815415301 BACK COVER 42 313815135081 HINGE-PLATE 43 313815135071 KINGSTON PLATE 44 313815133511 VESA PLATE 45 313815410901 INSULATE PLATE 50 313815755861 COMPACT BASE(T) 90 313810440571 HOUSING COVER 101 313815411602 HINGE COVER(T) 1057 313815861941 FRAME+WIRE ASSY Packing Parts 450 313815639171 CARTON 451 313815639181 CUSHION-R 452 313815639191 CUSHION-L 453 313815621491 P.E. BAG Accessory 602 313811708271 E-D.F.U. 1060 313819874971 CORD SUB-D 15/1M5/SUB-D 15 GY 1061 313817874701 MAIN CORD (1.5M. EUROPEAN) miscellanea 291 313815566191 LABEL-CPU 295 313815566211 LABEL-EEPROM(Q) 1056 313819874721 FFC 30/205/30 PITCH 1.0MM 1058 823827717701 LSP 16R 2W W/WIRE ASSY 1059 313818875031 SPEAKER CABLE(GRAY) 1201 242202518432 SOC SUBD H 15P F SBFR 1202 242203300521 SOC DVI H 24P F 1.91DVI-D 1341 243803100435 SOC IC V 8P F 2.54 DIL 1352 243854300079 RES XTL SM 12MHZ 32P SMD-49 1451 242202519002 CON H 30P F 1.00 SM FFC 0.3 1501 242202518824 CON V 11P M 2.00 63391 1511 242202519001 CON V 11P M 2.00 61391 1801 242202518955 SOC USB V 4P F 2.5 5411 1802 242202518875 SOC USB H 4P F 2.0 5401 1905 242202605588 SOC PHONE V 1P F 3.5 ST 1911 242202518814 CON V 2P M 2.00 63382 1912 242202518814 CON V 2P M 2.00 63382 1921 242202605594 SOC PHONE V 1P F 3.5 ST BK 1931 242202518899 CON H 11P M 2.00 63371 1932 243812800196 SWI TACT H=5 GY 160G SKHHAM 1933 243812800196 SWI TACT H=5 GY 160G SKHHAM 1934 243812800196 SWI TACT H=5 GY 160G SKHHAM 1935 243812800196 SWI TACT H=5 GY 160G SKHHAM 1936 243812800196 SWI TACT H=5 GY 160G SKHHAM 1937 243812800196 SWI TACT H=5 GY 160G SKHHAM 1938 243812800196 SWI TACT H=5 GY 160G SKHHAM 4444 313810610453 CD ROM - SERVICE MANUAL 4444 313810610454 SERVICE MANUAL 8061 313819874631 CBLE-431 11/245/11-431 AWG28 8941 313819874941 CBLE FAST 5.8/100/FAST AWG18 LCD Panel 1050 823827717631 TFT-LCD MOD QD170EL07 REV.09 PCB Assy 1051 313815861751 SCALER ASSY 1052 313815861731 AUDIO + CTL ASSY 1054 313815861771 USB ASSY 1055 823827717111 LIPS(AIP-0093) PCB Assy 1051 313815861751 SCALER ASSY 2202 223886715339 CER1 0603 NP0 50V 33P PM5 2203 223886715221 CER1 0603 NP0 50V 220P PM5 2207 223878615649 CER2 0603 X7R 16V 100N PM10 2210 223878615649 CER2 0603 X7R 16V 100N PM10 2211 223878615649 CER2 0603 X7R 16V 100N PM10 2212 223878615649 CER2 0603 X7R 16V 100N PM10 2213 223878615649 CER2 0603 X7R 16V 100N PM10 2214 223878615649 CER2 0603 X7R 16V 100N PM10 2215 223878615649 CER2 0603 X7R 16V 100N PM10 2216 223878615649 CER2 0603 X7R 16V 100N PM10 2217 223878615649 CER2 0603 X7R 16V 100N PM10 2219 223878615649 CER2 0603 X7R 16V 100N PM10 2221 223878615649 CER2 0603 X7R 16V 100N PM10 2301 223878615649 CER2 0603 X7R 16V 100N PM10 2302 222224119876 CER2 1206 Y5V 10V 10U P8020 2304 223886715101 CER1 0603 NP0 50V 100P PM5 2305 223886715101 CER1 0603 NP0 50V 100P PM5 2306 223886715229 CER1 0603 NP0 50V 22P PM5 2307 223886715229 CER1 0603 NP0 50V 22P PM5 2308 223886715101 CER1 0603 NP0 50V 100P PM5 2321 223878615649 CER2 0603 X7R 16V 100N PM10 2341 223878615649 CER2 0603 X7R 16V 100N PM10 2421 202203100381 ELCAP SK 10V S 100U PM20 2422 223878615649 CER2 0603 X7R 16V 100N PM10 2423 223878615649 CER2 0603 X7R 16V 100N PM10 2424 223878615649 CER2 0603 X7R 16V 100N PM10 2425 223878615649 CER2 0603 X7R 16V 100N PM10 2426 222224119876 CER2 1206 Y5V 10V 10U P8020 2427 223878615649 CER2 0603 X7R 16V 100N PM10 2428 223878615649 CER2 0603 X7R 16V 100N PM10 2429 223878615649 CER2 0603 X7R 16V 100N PM10 2430 223878615649 CER2 0603 X7R 16V 100N PM10 2431 223878615649 CER2 0603 X7R 16V 100N PM10 2432 223878615649 CER2 0603 X7R 16V 100N PM10 2433 223878615649 CER2 0603 X7R 16V 100N PM10 2434 223878615649 CER2 0603 X7R 16V 100N PM10 2435 202203100385 ELCAP SJA 10V S 470U PM20 2437 223878615649 CER2 0603 X7R 16V 100N PM10 2439 223878615649 CER2 0603 X7R 16V 100N PM10 2440 222224119876 CER2 1206 Y5V 10V 10U P8020 2444 223878615649 CER2 0603 X7R 16V 100N PM10 2445 223878615649 CER2 0603 X7R 16V 100N PM10 2447 222224119876 CER2 1206 Y5V 10V 10U P8020 2501 223878615649 CER2 0603 X7R 16V 100N PM10 2502 223878615649 CER2 0603 X7R 16V 100N PM10 2503 223878615649 CER2 0603 X7R 16V 100N PM10 2504 223878615649 CER2 0603 X7R 16V 100N PM10 2505 203803513301 ELCAP RGA 25V S 47U PM20 2506 223878615649 CER2 0603 X7R 16V 100N PM10 2507 223878615649 CER2 0603 X7R 16V 100N PM10 2508 203803527203 ELCAP KM 16V S 220U PM20 2512 223858615623 CER2 0603 X7R 50V 1N PM10 2513 223858615623 CER2 0603 X7R 50V 1N PM10 2514 223858615623 CER2 0603 X7R 50V 1N PM10 2515 223858615623 CER2 0603 X7R 50V 1N PM10 2516 223858615623 CER2 0603 X7R 50V 1N PM10 2517 223858615623 CER2 0603 X7R 50V 1N PM10 2520 223878615649 CER2 0603 X7R 16V 100N PM10 2521 223878615649 CER2 0603 X7R 16V 100N PM10 2534 223858615636 CER2 0603 X7R 50V 10N PM10 2536 203803527501 ELCAP KM 50V S 10U PM20 2537 223878615649 CER2 0603 X7R 16V 100N PM10 2541 223878615649 CER2 0603 X7R 16V 100N PM10 2542 222224119876 CER2 1206 Y5V 10V 10U P8020 2543 202203100381 ELCAP SK 10V S 100U PM20 2545 223878615649 CER2 0603 X7R 16V 100N PM10 2546 222224119876 CER2 1206 Y5V 10V 10U P8020 2547 202202000615 ELCAP REA 10V S 100U PM20 3201 232270260101 RST SM 0603 RC21 100R PM5 3202 232270260101 RST SM 0603 RC21 100R PM5 3203 232270260101 RST SM 0603 RC21 100R PM5 3204 232270260101 RST SM 0603 RC21 100R PM5 3205 232270260222 RST SM 0603 RC21 2K2 PM5 3206 232270260222 RST SM 0603 RC21 2K2 PM5 3208 232270260102 RST SM 0603 RC21 1K PM5 3209 232270260339 RST SM 0603 RC21 33R PM5 3210 232270260102 RST SM 0603 RC21 1K PM5 3211 232270260339 RST SM 0603 RC21 33R PM5 3212 212211805964 RST SM 0603 RC0603 75R PM1 3213 232270260519 RST SM 0603 RC21 51R PM5 3214 232270260339 RST SM 0603 RC21 33R PM5 3215 212211805964 RST SM 0603 RC0603 75R PM1 3216 232270260519 RST SM 0603 RC21 51R PM5 3217 232270260339 RST SM 0603 RC21 33R PM5 3218 212211805964 RST SM 0603 RC0603 75R PM1 3219 232270260519 RST SM 0603 RC21 51R PM5 3222 232270260102 RST SM 0603 RC21 1K PM5 3224 232270260101 RST SM 0603 RC21 100R PM5 3226 232270260101 RST SM 0603 RC21 100R PM5 3241 212211805631 RST SM 0603 JUMP. MAX 0R05 3243 212211805631 RST SM 0603 JUMP. MAX 0R05 3301 232270260101 RST SM 0603 RC21 100R PM5 3302 232270260101 RST SM 0603 RC21 100R PM5 3303 232270260101 RST SM 0603 RC21 100R PM5 3304 232270260101 RST SM 0603 RC21 100R PM5 3305 232270260101 RST SM 0603 RC21 100R PM5 3306 232270260101 RST SM 0603 RC21 100R PM5 3307 232270260472 RST SM 0603 RC21 4K7 PM5 3308 232270260472 RST SM 0603 RC21 4K7 PM5 3321 212211805669 RST SM 0603 RC0603 10K PM5 3322 232270260472 RST SM 0603 RC21 4K7 PM5 3323 232270260472 RST SM 0603 RC21 4K7 PM5 3324 212211805669 RST SM 0603 RC0603 10K PM5 3325 232270260101 RST SM 0603 RC21 100R PM5 3330 232270260105 RST SM 0603 RC21 1M PM5 3331 212211805678 RST SM 0603 RC0603 47K PM5 3332 232270260472 RST SM 0603 RC21 4K7 PM5 3333 232270260472 RST SM 0603 RC21 4K7 PM5 3342 232270260472 RST SM 0603 RC21 4K7 PM5 3343 232270260472 RST SM 0603 RC21 4K7 PM5 3345 232270260101 RST SM 0603 RC21 100R PM5 3346 232270260101 RST SM 0603 RC21 100R PM5 3402 212211805651 RST SM 0603 RC0603 390R PM5 3412 232270260472 RST SM 0603 RC21 4K7 PM5 3415 232270468201 RST SM 0603 RC22H 820R PM1 3416 232270462702 RST SM 0603 RC22H 2K7 PM1 3462 212211805637 RST SM 0603 RC0603 22R PM5 3463 232270260101 RST SM 0603 RC21 100R PM5 3464 232270260101 RST SM 0603 RC21 100R PM5 3465 212211805637 RST SM 0603 RC0603 22R PM5 3466 212211805637 RST SM 0603 RC0603 22R PM5 3467 212211805637 RST SM 0603 RC0603 22R PM5 3468 232270260101 RST SM 0603 RC21 100R PM5 3469 232270260101 RST SM 0603 RC21 100R PM5 3501 212211805639 RST SM 0603 RC0603 47R PM5 3502 212211805639 RST SM 0603 RC0603 47R PM5 3503 212211805639 RST SM 0603 RC0603 47R PM5 3511 232270260101 RST SM 0603 RC21 100R PM5 http://www.wjel.net 95 Go to cover page 170B6 LCD Spare Parts List(170B6) 3512 232270260101 RST SM 0603 RC21 100R PM5 3513 232270260101 RST SM 0603 RC21 100R PM5 3514 232270260101 RST SM 0603 RC21 100R PM5 3515 232270260102 RST SM 0603 RC21 1K PM5 3516 212211805647 RST SM 0603 RC0603 220R PM5 3517 212211805647 RST SM 0603 RC0603 220R PM5 3518 212211805669 RST SM 0603 RC0603 10K PM5 3519 212211805669 RST SM 0603 RC0603 10K PM5 3521 212211805669 RST SM 0603 RC0603 10K PM5 3522 212211805669 RST SM 0603 RC0603 10K PM5 3523 212211805669 RST SM 0603 RC0603 10K PM5 3531 212211805972 RST SM 1206 JUMP. MAX 0R05 3533 212211805678 RST SM 0603 RC0603 47K PM5 3534 232270260104 RST SM 0603 RC21 100K PM5 3535 212211805669 RST SM 0603 RC0603 10K PM5 5210 242254945579 IND FXD 1206 EMI 100MHZ 100R 5211 242254945579 IND FXD 1206 EMI 100MHZ 100R 5421 242254945579 IND FXD 1206 EMI 100MHZ 100R 5424 242254945579 IND FXD 1206 EMI 100MHZ 100R 5425 242254945579 IND FXD 1206 EMI 100MHZ 100R 5435 242254900113 IND FXD 0603 EMI 100MHZ 1K 5501 242254944196 IND FXD 0805 EMI 100MHZ 120R 5502 242254944196 IND FXD 0805 EMI 100MHZ 120R 5503 242254944196 IND FXD 0805 EMI 100MHZ 120R 5504 242254945579 IND FXD 1206 EMI 100MHZ 100R 5507 242254945579 IND FXD 1206 EMI 100MHZ 100R 5535 242254945579 IND FXD 1206 EMI 100MHZ 100R 6210 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6212 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6213 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6214 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6215 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6221 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6301 932205042685 DIO SIG SM BAV99LG (ONSE) 6302 932205042685 DIO SIG SM BAV99LG (ONSE) 6303 933976370215 DIO SIG SM BAT54C (PHSE) 6304 932205042685 DIO SIG SM BAV99LG (ONSE) 7301 313815861861 FLASH IC ASSY(7301) 7301 932220582682 IC SM NT68F633L (NOVA) 7341 313815862791 EEPROM IC ASSY 7341 932218650682 IC AT24C16A-10PU-2.7 (ATME) 7401 823827716411 NT68563EF DVAL SXGA SCALER IC 7518 932217439685 TRA SIG SM BC857C (KEC0) 7519 932217439685 TRA SIG SM BC857C (KEC0) 7531 932216638668 FET POW SM SI5441DC-E3 (VISH) 7532 932209265685 TRA SIG SM MUN2211JG (ONSE) 7541 932222077668 IC SM AME1117ECGTZ (ST00) 7545 932222076668 IC SM AME1117CCGTZ (ST00) PCB Assy 1052 313815861731 AUDIO + CTL ASSY 2901 202203100261 ELCAP LZ 16V S 2200U PM20 2902 202203100258 ELCAP EB 16V S 470U PM20 2903 222278015663 CER2 0805 X7R 16V 1U PM10 2904 223824619858 CER2 0603 Y5V 10V 470N P8020 2905 222278015663 CER2 0805 X7R 16V 1U PM10 2906 223886715101 CER1 0603 NP0 50V 100P PM5 2908 223824619858 CER2 0603 Y5V 10V 470N P8020 2910 223824619858 CER2 0603 Y5V 10V 470N P8020 2911 223824619858 CER2 0603 Y5V 10V 470N P8020 2912 223824619858 CER2 0603 Y5V 10V 470N P8020 2914 223824619858 CER2 0603 Y5V 10V 470N P8020 2916 223824619858 CER2 0603 Y5V 10V 470N P8020 2917 223824619858 CER2 0603 Y5V 10V 470N P8020 2918 202202000964 ELCAP SS-H 10V S 330U PM20 2919 223886715101 CER1 0603 NP0 50V 100P PM5 2920 223886715101 CER1 0603 NP0 50V 100P PM5 2921 223886715101 CER1 0603 NP0 50V 100P PM5 2922 223878615649 CER2 0603 X7R 16V 100N PM10 2923 223858615636 CER2 0603 X7R 50V 10N PM10 2924 222278015663 CER2 0805 X7R 16V 1U PM10 2925 222278015663 CER2 0805 X7R 16V 1U PM10 2926 223878615645 CER2 0603 X7R 16V 47N PM10 2927 223824619858 CER2 0603 Y5V 10V 470N P8020 2928 223858615636 CER2 0603 X7R 50V 10N PM10 2929 222278015663 CER2 0805 X7R 16V 1U PM10 2930 202202000964 ELCAP SS-H 10V S 330U PM20 2931 223858615636 CER2 0603 X7R 50V 10N PM10 2932 223858615636 CER2 0603 X7R 50V 10N PM10 2935 223858615636 CER2 0603 X7R 50V 10N PM10 2936 223858615636 CER2 0603 X7R 50V 10N PM10 2937 223858619812 CER2 0603 Y5V 50V 100N P8020 3903 212211805972 RST SM 1206 JUMP. MAX 0R05 3904 213811201101 RST SM 0805 RC05 100R PM5 3905 212211805972 RST SM 1206 JUMP. MAX 0R05 3908 212211805676 RST SM 0603 RC0603 33K PM5 3909 212211805681 RST SM 0603 RC0603 68K PM5 3914 232270260472 RST SM 0603 RC21 4K7 PM5 3915 232270260472 RST SM 0603 RC21 4K7 PM5 3916 232270260472 RST SM 0603 RC21 4K7 PM5 3917 232270260472 RST SM 0603 RC21 4K7 PM5 3921 232270260104 RST SM 0603 RC21 100K PM5 3922 232270260104 RST SM 0603 RC21 100K PM5 3923 212211805669 RST SM 0603 RC0603 10K PM5 3924 212211805669 RST SM 0603 RC0603 10K PM5 3926 212211805669 RST SM 0603 RC0603 10K PM5 3927 212211805682 RST SM 0603 RC0603 82K PM5 3928 212211805673 RST SM 0603 RC0603 18K PM5 3929 232270260102 RST SM 0603 RC21 1K PM5 3930 232270260102 RST SM 0603 RC21 1K PM5 3932 232270260102 RST SM 0603 RC21 1K PM5 3933 212211805669 RST SM 0603 RC0603 10K PM5 3934 212211805678 RST SM 0603 RC0603 47K PM5 3935 232270260102 RST SM 0603 RC21 1K PM5 3936 212211805669 RST SM 0603 RC0603 10K PM5 3937 212211805678 RST SM 0603 RC0603 47K PM5 3938 232270260511 RST SM 0603 RC21 510R PM5 3939 232270260102 RST SM 0603 RC21 1K PM5 3941 232271161109 RST SM 1206 RC01 10R PM5 5901 242254900463 FIL MAINS 16MH 1A LS-PH04 5903 242254900126 IND FXD 0805 EMI 100MHZ 120R 5904 242254900126 IND FXD 0805 EMI 100MHZ 120R 5905 242254944197 IND FXD 0805 EMI 100MHZ 220R 5906 242254944197 IND FXD 0805 EMI 100MHZ 220R 5907 242254944197 IND FXD 0805 EMI 100MHZ 220R 5908 242254900064 IND FXD 0805 EMI 100MHZ 220R 5909 242254944197 IND FXD 0805 EMI 100MHZ 220R 5910 242254900064 IND FXD 0805 EMI 100MHZ 220R 5931 242254900126 IND FXD 0805 EMI 100MHZ 120R 6901 932220628682 DIO REC SB140AL-5301 (VISH) 6931 932219981682 LED VS L-3WYGW-8.03* (KIEL) 7901 932219970668 IC SM TPA6030A4PWP (TI00) PCB Assy 1054 313815861771 USB ASSY 2801 222291016649 CER2 0805 X7R 25V 100N PM10 5801 242254943409 IND FXD 1206 EMI 100MHZ 50R 5802 242254943409 IND FXD 1206 EMI 100MHZ 50R http://www.wjel.net 96 Go to cover page 170B6 LCD Spare Parts List(150B6) Model: 150B6CG/00(LPL) 12NC: 8639 000 16212 Mechanical Parts 30 313815759051 BEZEL ASSY 31 313815411741 BEZEL(T) 32 313815415821 BUTTON-POWER 33 313815415831 FUNCTION KEYS 34 313815411791 LENS 35 313815412611 STRIP 40 313815755951 BACK COVER ASSY(T) 41 313815411752 BACK COVER(T) 42 313815040551 SQUARE NUT-M4 43 313815756231 HINGE-PLATE ASSY 44 313815135131 HINGE-PLATE 46 313815135071 KINGSTON PLATE 50 313815755961 COMPACT BASE(T) 90 313810440571 HOUSING COVER 101 313815411801 HINGE COVER(T) 1160 313815862071 METAL FRAME+WIRE ASSY Packing Parts 450 313815639581 CARTON 451 313815639771 CUSHION-R 452 313815639761 CUSHION-L 453 313815621481 P.E.BAG Accessory 602 313811708281 E-D.F.U 1157 313817874701 MAIN CORD (1.5M. EUROPEAN) 1158 313819874971 CORD SUB-D 15/1M5/SUB-D 15 GY miscellanea 291 313815566591 LABEL-(LPL) 295 313815566591 LABEL-(LPL) 615 313811708101 HEX CODE OF F/W 1161 313819872371 LSP BOX 16R 1.5-L/R(P011U) 1162 313818875031 SPEAKER CABLE(GRAY) 1201 242202518432 SOC SUBD H 15P F SBFR 1202 242203300521 SOC DVI H 24P F 1.91DVI-D 1341 243803100435 SOC IC V 8P F 2.54 DIL 1352 243854300079 RES XTL SM 12MHZ 32P SMD-49 1453 242202505567 CON V 20P M 1.25 SM 60947 1501 242202518824 CON V 11P M 2.00 63391 1511 242202519001 CON V 11P M 2.00 61391 1905 242202605588 SOC PHONE V 1P F 3.5 ST 1911 242202518814 CON V 2P M 2.00 63382 1912 242202518814 CON V 2P M 2.00 63382 1921 242202605594 SOC PHONE V 1P F 3.5 ST BK 1931 242202518901 CON H 13P M 2.00 63373 1932 242212803007 SWI TACT 1P 1POS 12V V 5MM 1933 242212803007 SWI TACT 1P 1POS 12V V 5MM 1934 242212803007 SWI TACT 1P 1POS 12V V 5MM 1935 242212803007 SWI TACT 1P 1POS 12V V 5MM 1936 242212803007 SWI TACT 1P 1POS 12V V 5MM 1937 242212803007 SWI TACT 1P 1POS 12V V 5MM 1938 242212803007 SWI TACT 1P 1POS 12V V 5MM 4444 313810610453 CD ROM - SERVICE MANUAL 4444 313810610454 SERVICE MANUAL 8161 313819871711 CBLE -021 11/180/13-023 AWG28 8163 313819874471 CBLE -104 20/95/20-032 AWG28 8941 313819871551 CBLE FAST/70/FAST AWG18 LCD Panel 1050 823827716851 LCD LM150X08-A5 PCB Assy 1051 313815862031 SCALER ASSY 1052 823827717281 LIPS(AIP-0097) 1053 313815862431 AUDIO+CONTROL ASSY PCB Assy 1051 313815862031 SCALER ASSY 2202 223886715339 CER1 0603 NP0 50V 33P PM5 2203 223886715221 CER1 0603 NP0 50V 220P PM5 2207 223878615649 CER2 0603 X7R 16V 100N PM10 2210 223878615649 CER2 0603 X7R 16V 100N PM10 2211 223878615649 CER2 0603 X7R 16V 100N PM10 2212 223878615649 CER2 0603 X7R 16V 100N PM10 2213 223878615649 CER2 0603 X7R 16V 100N PM10 2214 223878615649 CER2 0603 X7R 16V 100N PM10 2215 223878615649 CER2 0603 X7R 16V 100N PM10 2216 223878615649 CER2 0603 X7R 16V 100N PM10 2217 223878615649 CER2 0603 X7R 16V 100N PM10 2219 223878615649 CER2 0603 X7R 16V 100N PM10 2221 223878615649 CER2 0603 X7R 16V 100N PM10 2301 223878615649 CER2 0603 X7R 16V 100N PM10 2302 222224119876 CER2 1206 Y5V 10V 10U P8020 2304 223886715101 CER1 0603 NP0 50V 100P PM5 2305 223886715101 CER1 0603 NP0 50V 100P PM5 2306 223886715229 CER1 0603 NP0 50V 22P PM5 2307 223886715229 CER1 0603 NP0 50V 22P PM5 2308 223886715101 CER1 0603 NP0 50V 100P PM5 2321 223878615649 CER2 0603 X7R 16V 100N PM10 2341 223878615649 CER2 0603 X7R 16V 100N PM10 2421 202203100381 ELCAP SK 10V S 100U PM20 2422 223878615649 CER2 0603 X7R 16V 100N PM10 2423 223878615649 CER2 0603 X7R 16V 100N PM10 2424 223878615649 CER2 0603 X7R 16V 100N PM10 2425 223878615649 CER2 0603 X7R 16V 100N PM10 2426 222224119876 CER2 1206 Y5V 10V 10U P8020 2427 223878615649 CER2 0603 X7R 16V 100N PM10 2428 223878615649 CER2 0603 X7R 16V 100N PM10 2429 223878615649 CER2 0603 X7R 16V 100N PM10 2430 223878615649 CER2 0603 X7R 16V 100N PM10 2431 223878615649 CER2 0603 X7R 16V 100N PM10 2432 223878615649 CER2 0603 X7R 16V 100N PM10 2433 223878615649 CER2 0603 X7R 16V 100N PM10 2434 223878615649 CER2 0603 X7R 16V 100N PM10 2435 202203100385 ELCAP SJA 10V S 470U PM20 2437 223878615649 CER2 0603 X7R 16V 100N PM10 2439 223878615649 CER2 0603 X7R 16V 100N PM10 2440 222224119876 CER2 1206 Y5V 10V 10U P8020 2444 223878615649 CER2 0603 X7R 16V 100N PM10 2445 223878615649 CER2 0603 X7R 16V 100N PM10 2447 222224119876 CER2 1206 Y5V 10V 10U P8020 2501 223878615649 CER2 0603 X7R 16V 100N PM10 2502 223878615649 CER2 0603 X7R 16V 100N PM10 2503 223878615649 CER2 0603 X7R 16V 100N PM10 2504 223878615649 CER2 0603 X7R 16V 100N PM10 2505 203803513301 ELCAP RGA 25V S 47U PM20 2506 223878615649 CER2 0603 X7R 16V 100N PM10 2507 223878615649 CER2 0603 X7R 16V 100N PM10 2508 203803527203 ELCAP KM 16V S 220U PM20 2512 223858615623 CER2 0603 X7R 50V 1N PM10 2513 223858615623 CER2 0603 X7R 50V 1N PM10 2514 223858615623 CER2 0603 X7R 50V 1N PM10 2515 223858615623 CER2 0603 X7R 50V 1N PM10 2516 223858615623 CER2 0603 X7R 50V 1N PM10 2517 223858615623 CER2 0603 X7R 50V 1N PM10 2520 223878615649 CER2 0603 X7R 16V 100N PM10 2534 223858615636 CER2 0603 X7R 50V 10N PM10 2536 203803527501 ELCAP KM 50V S 10U PM20 2537 223878615649 CER2 0603 X7R 16V 100N PM10 2541 223878615649 CER2 0603 X7R 16V 100N PM10 2542 222224119876 CER2 1206 Y5V 10V 10U P8020 2543 202203100381 ELCAP SK 10V S 100U PM20 3201 232270260101 RST SM 0603 RC21 100R PM5 3202 232270260101 RST SM 0603 RC21 100R PM5 3203 232270260101 RST SM 0603 RC21 100R PM5 3204 232270260101 RST SM 0603 RC21 100R PM5 3205 232270260222 RST SM 0603 RC21 2K2 PM5 3206 232270260222 RST SM 0603 RC21 2K2 PM5 3208 232270260102 RST SM 0603 RC21 1K PM5 3209 232270260339 RST SM 0603 RC21 33R PM5 3210 232270260102 RST SM 0603 RC21 1K PM5 3211 232270260339 RST SM 0603 RC21 33R PM5 3212 212211805964 RST SM 0603 RC0603 75R PM1 3213 232270260519 RST SM 0603 RC21 51R PM5 3214 232270260339 RST SM 0603 RC21 33R PM5 3215 212211805964 RST SM 0603 RC0603 75R PM1 3216 232270260519 RST SM 0603 RC21 51R PM5 3217 232270260339 RST SM 0603 RC21 33R PM5 3218 212211805964 RST SM 0603 RC0603 75R PM1 3219 232270260519 RST SM 0603 RC21 51R PM5 3222 232270260102 RST SM 0603 RC21 1K PM5 3224 232270260101 RST SM 0603 RC21 100R PM5 3226 232270260101 RST SM 0603 RC21 100R PM5 3241 232270296001 RST SM 0603 JUMP. MAX 0R05 3243 232270296001 RST SM 0603 JUMP. MAX 0R05 3301 232270260101 RST SM 0603 RC21 100R PM5 3302 232270260101 RST SM 0603 RC21 100R PM5 3303 232270260101 RST SM 0603 RC21 100R PM5 3304 232270260101 RST SM 0603 RC21 100R PM5 3305 232270260101 RST SM 0603 RC21 100R PM5 3306 232270260101 RST SM 0603 RC21 100R PM5 3307 232270260472 RST SM 0603 RC21 4K7 PM5 3308 232270260472 RST SM 0603 RC21 4K7 PM5 3321 212211805669 RST SM 0603 RC0603 10K PM5 3322 232270260472 RST SM 0603 RC21 4K7 PM5 3323 232270260472 RST SM 0603 RC21 4K7 PM5 3324 212211805669 RST SM 0603 RC0603 10K PM5 3325 232270260101 RST SM 0603 RC21 100R PM5 3329 213811291002 RST SM 0805 JUMP. MAX 0R05 3330 232270260105 RST SM 0603 RC21 1M PM5 3331 212211805678 RST SM 0603 RC0603 47K PM5 3332 232270260472 RST SM 0603 RC21 4K7 PM5 3333 232270260472 RST SM 0603 RC21 4K7 PM5 3342 232270260472 RST SM 0603 RC21 4K7 PM5 3343 232270260472 RST SM 0603 RC21 4K7 PM5 3345 232270260101 RST SM 0603 RC21 100R PM5 3346 232270260101 RST SM 0603 RC21 100R PM5 3402 212211805651 RST SM 0603 RC0603 390R PM5 3412 232270260472 RST SM 0603 RC21 4K7 PM5 3462 212211805637 RST SM 0603 RC0603 22R PM5 3463 232270260101 RST SM 0603 RC21 100R PM5 3464 232270260101 RST SM 0603 RC21 100R PM5 3465 212211805637 RST SM 0603 RC0603 22R PM5 3466 212211805637 RST SM 0603 RC0603 22R PM5 3467 212211805637 RST SM 0603 RC0603 22R PM5 3468 232270260101 RST SM 0603 RC21 100R PM5 3469 232270260101 RST SM 0603 RC21 100R PM5 3501 212211805639 RST SM 0603 RC0603 47R PM5 3502 212211805639 RST SM 0603 RC0603 47R PM5 3503 212211805639 RST SM 0603 RC0603 47R PM5 3511 232270260101 RST SM 0603 RC21 100R PM5 3512 232270260101 RST SM 0603 RC21 100R PM5 3513 232270260101 RST SM 0603 RC21 100R PM5 3514 232270260101 RST SM 0603 RC21 100R PM5 3515 232270260102 RST SM 0603 RC21 1K PM5 3516 212211805647 RST SM 0603 RC0603 220R PM5 3517 212211805647 RST SM 0603 RC0603 220R PM5 3518 212211805669 RST SM 0603 RC0603 10K PM5 http://www.wjel.net 97 Go to cover page 170B6 LCD Spare Parts List(150B6) 3519 212211805669 RST SM 0603 RC0603 10K PM5 3521 212211805669 RST SM 0603 RC0603 10K PM5 3522 212211805669 RST SM 0603 RC0603 10K PM5 3523 212211805669 RST SM 0603 RC0603 10K PM5 3531 212211805972 RST SM 1206 JUMP. MAX 0R05 3533 212211805678 RST SM 0603 RC0603 47K PM5 3534 232270260104 RST SM 0603 RC21 100K PM5 3535 212211805669 RST SM 0603 RC0603 10K PM5 3545 212211805972 RST SM 1206 JUMP. MAX 0R05 5210 242254945579 IND FXD 1206 EMI 100MHZ 100R 5211 242254945579 IND FXD 1206 EMI 100MHZ 100R 5421 242254945579 IND FXD 1206 EMI 100MHZ 100R 5424 242254945579 IND FXD 1206 EMI 100MHZ 100R 5425 242254945579 IND FXD 1206 EMI 100MHZ 100R 5435 242254900113 IND FXD 0603 EMI 100MHZ 1K 5501 242254944196 IND FXD 0805 EMI 100MHZ 120R 5502 242254944196 IND FXD 0805 EMI 100MHZ 120R 5503 242254944196 IND FXD 0805 EMI 100MHZ 120R 5504 242254945579 IND FXD 1206 EMI 100MHZ 100R 5507 242254945579 IND FXD 1206 EMI 100MHZ 100R 5535 242254945579 IND FXD 1206 EMI 100MHZ 100R 6210 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6212 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6213 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6214 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6215 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6221 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6302 932209863685 DIO SIG SM BAV99 (VISH) 6303 933976370215 DIO SIG SM BAT54C (PHSE) 6304 932209863685 DIO SIG SM BAV99 (VISH) 7301 313815862501 CPU IC ASSY 7301 932220582682 IC SM NT68F633L (NOVA) 7341 313815862521 EEPROM ASSY-LG 7341 932218650682 IC AT24C16A-10PU-2.7 (ATME) 7401 823827716401 NT68563xF DVAL XGA SCALER IC 7518 932217439685 TRA SIG SM BC857C (KEC0) 7519 932217439685 TRA SIG SM BC857C (KEC0) 7531 932216638668 FET POW SM SI5441DC-E3 (VISH) 7532 932209265685 TRA SIG SM MUN2211JG (ONSE) 7541 932222077668 IC SM AME1117ECGTZ (AME0) PCB Assy 1053 313815862431 AUDIO+CONTROL ASSY 2901 202203100261 ELCAP LZ 16V S 2200U PM20 2902 202203100258 ELCAP EB 16V S 470U PM20 2903 222278015663 CER2 0805 X7R 16V 1U PM10 2905 222278015663 CER2 0805 X7R 16V 1U PM10 2906 223824619858 CER2 0603 Y5V 10V 470N P8020 2907 223858615636 CER2 0603 X7R 50V 10N PM10 2908 223824619858 CER2 0603 Y5V 10V 470N P8020 2910 223824619858 CER2 0603 Y5V 10V 470N P8020 2911 223824619858 CER2 0603 Y5V 10V 470N P8020 2912 223824619858 CER2 0603 Y5V 10V 470N P8020 2913 223858615636 CER2 0603 X7R 50V 10N PM10 2914 223824619858 CER2 0603 Y5V 10V 470N P8020 2916 223824619858 CER2 0603 Y5V 10V 470N P8020 2917 223824619858 CER2 0603 Y5V 10V 470N P8020 2918 202202000888 ELCAP SH 10V S 330U PM20 2922 223878615649 CER2 0603 X7R 16V 100N PM10 2924 223878615649 CER2 0603 X7R 16V 100N PM10 2925 222278015663 CER2 0805 X7R 16V 1U PM10 2926 223878615645 CER2 0603 X7R 16V 47N PM10 2927 223824619858 CER2 0603 Y5V 10V 470N P8020 2929 222278015663 CER2 0805 X7R 16V 1U PM10 2930 202202000888 ELCAP SH 10V S 330U PM20 2931 223858615636 CER2 0603 X7R 50V 10N PM10 2932 223858615636 CER2 0603 X7R 50V 10N PM10 2935 223858615636 CER2 0603 X7R 50V 10N PM10 2936 223858615636 CER2 0603 X7R 50V 10N PM10 2937 223858615636 CER2 0603 X7R 50V 10N PM10 2938 223858615636 CER2 0603 X7R 50V 10N PM10 3903 212211805972 RST SM 1206 JUMP. MAX 0R05 3905 212211805972 RST SM 1206 JUMP. MAX 0R05 3908 212211805676 RST SM 0603 RC0603 33K PM5 3909 212211805681 RST SM 0603 RC0603 68K PM5 3912 212211805972 RST SM 1206 JUMP. MAX 0R05 3914 232270260512 RST SM 0603 RC21 5K1 PM5 3915 232270260512 RST SM 0603 RC21 5K1 PM5 3916 232270260512 RST SM 0603 RC21 5K1 PM5 3917 232270260512 RST SM 0603 RC21 5K1 PM5 3920 212211805669 RST SM 0603 RC0603 10K PM5 3921 232270260104 RST SM 0603 RC21 100K PM5 3922 232270260104 RST SM 0603 RC21 100K PM5 3923 212211805669 RST SM 0603 RC0603 10K PM5 3926 212211805669 RST SM 0603 RC0603 10K PM5 3927 212211805682 RST SM 0603 RC0603 82K PM5 3928 212211805673 RST SM 0603 RC0603 18K PM5 3929 232270260102 RST SM 0603 RC21 1K PM5 3930 232270260102 RST SM 0603 RC21 1K PM5 3931 232270260102 RST SM 0603 RC21 1K PM5 3932 212211805669 RST SM 0603 RC0603 10K PM5 3933 212211805678 RST SM 0603 RC0603 47K PM5 3934 232270260102 RST SM 0603 RC21 1K PM5 3935 212211805669 RST SM 0603 RC0603 10K PM5 3936 212211805678 RST SM 0603 RC0603 47K PM5 3937 213811201101 RST SM 0805 RC05 100R PM5 3938 232271161109 RST SM 1206 RC01 10R PM5 5901 313819871121 FIL MAINS 16MH 1.0A LS-PH03C- 5902 242254900126 IND FXD 0805 EMI 100MHZ 120R 5903 242254900126 IND FXD 0805 EMI 100MHZ 120R 5904 242254900126 IND FXD 0805 EMI 100MHZ 120R 5929 242254900064 IND FXD 0805 EMI 100MHZ 220R 5930 242254900064 IND FXD 0805 EMI 100MHZ 220R 5934 232273061511 RST SM 0805 RC11 510R PM5 5935 232273061102 RST SM 0805 RC11 1K PM5 6901 932220628682 DIO REC SB140AL-5301 (VISH) 6902 932220675682 DIO REC M100AL-5301-E3 (VISH) 6931 932219981682 LED VS L-3WYGW-8.03* (KIEL) 7901 932219970668 IC SM TPA6030A4PWP (TI00) http://www.wjel.net 98 Go to cover page 170B6 LCD Spare Parts List(190B6) Model: 190B6CG/00(LPL) 12NC: 8639 000 16188 Mechanical Parts 30 313815759091 FRONT BEZEL ASSY(T) 31 313815415341 BEZEL(T) 32 313815412321 STRIP-DECORATION(T) 33 313815415581 BUTTON-CONTROL(T) 34 313815411231 LENS-POWER 40 313815759151 BACK COVER ASSY(T)-LPL 41 313815415961 BACK COVER(T)-LPL 42 313815411271 PLATE-VENT 43 313815133511 VESA PLATE 44 313815137201 KENSINGTON PLATE 45 313815410901 INSULATE PLATE 46 313815405011 RUBBER-SLEEVE 50 313815759111 COMPACT BASE(T) 94 313815411261 HINGE COVER(T) 107 313810440571 HOUSING COVER 301 313815137191 METAL FRAME-LPL 1057 313815861841 FRAME+WIRE ASSY Packing Parts 450 313815639691 CARTON 451 313815639701 CUSHION-R 452 313815639711 CUSHION-L 453 313810656651 PE BAG Accessory 602 313811708291 E-DFU 1060 313819874971 CORD SUB-D 15/1M5/SUB-D 15 GY 1061 313817874701 MAIN CORD (1.5M. EUROPEAN) miscellanea 291 313815566911 LABEL-CPU 295 313815566921 LABEL-EEPROM-LPL 615 313811707771 HEX CODE OF F/W(NO MATL REQ) 1056 313819875281 FFC 30/230/30 PITCH 1.0MM 1058 823827717941 LSP BOX 16R 2W (PS-010023) 1059 313818875031 SPEAKER CABLE(GRAY) 1063 313819872531 CORD USB A/1M8/USB B BK 1951 242212803058 SWI TACT 1P 50MA 12V TSAA 1952 242212803058 SWI TACT 1P 50MA 12V TSAA 1953 242212803058 SWI TACT 1P 50MA 12V TSAA 1954 242212803058 SWI TACT 1P 50MA 12V TSAA 1955 242212803058 SWI TACT 1P 50MA 12V TSAA 1956 242212803058 SWI TACT 1P 50MA 12V TSAA 1957 242212803058 SWI TACT 1P 50MA 12V TSAA 4444 313810610453 CD ROM - SERVICE MANUAL 4444 313810610454 SERVICE MANUAL 8061 313819875321 CBLE-431 11/275/7+4 AWG28 8938 313819874941 CBLE FAST 5.8/100/FAST AWG18 LCD Panel 1050 823827717801 TFT-LCD LM190E04-A4 PCB Assy 1051 313815861931 SCALER ASSY 1052 313815861791 AUDIO +CONTROL ASSY 1053 313815861681 CONTROL ASSY 1054 313815861771 USB ASSY 1055 823827717111 LIPS(AIP-0093) PCB Assy 1051 313815861931 SCALER ASSY 2202 223886715339 CER1 0603 NP0 50V 33P PM5 2203 223886715221 CER1 0603 NP0 50V 220P PM5 2207 223878615649 CER2 0603 X7R 16V 100N PM10 2210 223878615649 CER2 0603 X7R 16V 100N PM10 2211 223878615649 CER2 0603 X7R 16V 100N PM10 2212 223878615649 CER2 0603 X7R 16V 100N PM10 2213 223878615649 CER2 0603 X7R 16V 100N PM10 2214 223878615649 CER2 0603 X7R 16V 100N PM10 2215 223878615649 CER2 0603 X7R 16V 100N PM10 2216 223878615649 CER2 0603 X7R 16V 100N PM10 2217 223878615649 CER2 0603 X7R 16V 100N PM10 2219 223878615649 CER2 0603 X7R 16V 100N PM10 2221 223878615649 CER2 0603 X7R 16V 100N PM10 2301 223878615649 CER2 0603 X7R 16V 100N PM10 2302 222224119876 CER2 1206 Y5V 10V 10U P8020 2304 223886715101 CER1 0603 NP0 50V 100P PM5 2305 223886715101 CER1 0603 NP0 50V 100P PM5 2306 223886715229 CER1 0603 NP0 50V 22P PM5 2307 223886715229 CER1 0603 NP0 50V 22P PM5 2308 223886715101 CER1 0603 NP0 50V 100P PM5 2321 223878615649 CER2 0603 X7R 16V 100N PM10 2341 223878615649 CER2 0603 X7R 16V 100N PM10 2421 202203100381 ELCAP SK 10V S 100U PM20 2422 223878615649 CER2 0603 X7R 16V 100N PM10 2423 223878615649 CER2 0603 X7R 16V 100N PM10 2424 223878615649 CER2 0603 X7R 16V 100N PM10 2425 223878615649 CER2 0603 X7R 16V 100N PM10 2426 222224119876 CER2 1206 Y5V 10V 10U P8020 2427 223878615649 CER2 0603 X7R 16V 100N PM10 2428 223878615649 CER2 0603 X7R 16V 100N PM10 2429 223878615649 CER2 0603 X7R 16V 100N PM10 2430 223878615649 CER2 0603 X7R 16V 100N PM10 2431 223878615649 CER2 0603 X7R 16V 100N PM10 2432 223878615649 CER2 0603 X7R 16V 100N PM10 2433 223878615649 CER2 0603 X7R 16V 100N PM10 2434 223878615649 CER2 0603 X7R 16V 100N PM10 2435 202203100385 ELCAP SJA 10V S 470U PM20 2437 223878615649 CER2 0603 X7R 16V 100N PM10 2439 223878615649 CER2 0603 X7R 16V 100N PM10 2440 222224119876 CER2 1206 Y5V 10V 10U P8020 2444 223878615649 CER2 0603 X7R 16V 100N PM10 2445 223878615649 CER2 0603 X7R 16V 100N PM10 2447 222224119876 CER2 1206 Y5V 10V 10U P8020 2501 223878615649 CER2 0603 X7R 16V 100N PM10 2502 223878615649 CER2 0603 X7R 16V 100N PM10 2503 223878615649 CER2 0603 X7R 16V 100N PM10 2504 223878615649 CER2 0603 X7R 16V 100N PM10 2505 203803513301 ELCAP RGA 25V S 47U PM20 2506 223878615649 CER2 0603 X7R 16V 100N PM10 2507 223878615649 CER2 0603 X7R 16V 100N PM10 2508 202203100216 ELCAP RGA 16V S 220U PM20 2512 223858615623 CER2 0603 X7R 50V 1N PM10 2513 223858615623 CER2 0603 X7R 50V 1N PM10 2514 223858615623 CER2 0603 X7R 50V 1N PM10 2515 223858615623 CER2 0603 X7R 50V 1N PM10 2516 223858615623 CER2 0603 X7R 50V 1N PM10 2517 223858615623 CER2 0603 X7R 50V 1N PM10 2520 223878615649 CER2 0603 X7R 16V 100N PM10 2521 223878615649 CER2 0603 X7R 16V 100N PM10 2534 223858615636 CER2 0603 X7R 50V 10N PM10 2536 203803527501 ELCAP KM 50V S 10U PM20 2537 223878615649 CER2 0603 X7R 16V 100N PM10 2541 223878615649 CER2 0603 X7R 16V 100N PM10 2542 222224119876 CER2 1206 Y5V 10V 10U P8020 2543 202203100381 ELCAP SK 10V S 100U PM20 2545 223878615649 CER2 0603 X7R 16V 100N PM10 2546 222224119876 CER2 1206 Y5V 10V 10U P8020 2547 202202000833 ELCAP GS 10V S 100U PM20 3201 232270260101 RST SM 0603 RC21 100R PM5 3202 232270260101 RST SM 0603 RC21 100R PM5 3203 232270260101 RST SM 0603 RC21 100R PM5 3204 232270260101 RST SM 0603 RC21 100R PM5 3205 232270260222 RST SM 0603 RC21 2K2 PM5 3206 232270260222 RST SM 0603 RC21 2K2 PM5 3208 232270260102 RST SM 0603 RC21 1K PM5 3209 232270260339 RST SM 0603 RC21 33R PM5 3210 232270260102 RST SM 0603 RC21 1K PM5 3211 232270260339 RST SM 0603 RC21 33R PM5 3212 212211805964 RST SM 0603 RC0603 75R PM1 3213 232270260519 RST SM 0603 RC21 51R PM5 3214 232270260339 RST SM 0603 RC21 33R PM5 3215 212211805964 RST SM 0603 RC0603 75R PM1 3216 232270260519 RST SM 0603 RC21 51R PM5 3217 232270260339 RST SM 0603 RC21 33R PM5 3218 212211805964 RST SM 0603 RC0603 75R PM1 3219 232270260519 RST SM 0603 RC21 51R PM5 3222 232270260102 RST SM 0603 RC21 1K PM5 3224 232270260101 RST SM 0603 RC21 100R PM5 3226 232270260101 RST SM 0603 RC21 100R PM5 3241 232270296001 RST SM 0603 JUMP. MAX 0R05 3243 232270296001 RST SM 0603 JUMP. MAX 0R05 3301 232270260101 RST SM 0603 RC21 100R PM5 3302 232270260101 RST SM 0603 RC21 100R PM5 3303 232270260101 RST SM 0603 RC21 100R PM5 3304 232270260101 RST SM 0603 RC21 100R PM5 3305 232270260101 RST SM 0603 RC21 100R PM5 3306 232270260101 RST SM 0603 RC21 100R PM5 3307 232270260472 RST SM 0603 RC21 4K7 PM5 3308 232270260472 RST SM 0603 RC21 4K7 PM5 3321 212211805669 RST SM 0603 RC0603 10K PM5 3322 232270260472 RST SM 0603 RC21 4K7 PM5 3323 232270260472 RST SM 0603 RC21 4K7 PM5 3324 212211805669 RST SM 0603 RC0603 10K PM5 3325 232270260101 RST SM 0603 RC21 100R PM5 3330 232270260105 RST SM 0603 RC21 1M PM5 3331 212211805678 RST SM 0603 RC0603 47K PM5 3332 232270260472 RST SM 0603 RC21 4K7 PM5 3333 232270260472 RST SM 0603 RC21 4K7 PM5 3342 232270260472 RST SM 0603 RC21 4K7 PM5 3343 232270260472 RST SM 0603 RC21 4K7 PM5 3345 232270260101 RST SM 0603 RC21 100R PM5 3346 232270260101 RST SM 0603 RC21 100R PM5 3402 212211805651 RST SM 0603 RC0603 390R PM5 3412 232270260472 RST SM 0603 RC21 4K7 PM5 3415 232270468201 RST SM 0603 RC22H 820R PM1 3416 232270462702 RST SM 0603 RC22H 2K7 PM1 3462 212211805637 RST SM 0603 RC0603 22R PM5 3463 232270260101 RST SM 0603 RC21 100R PM5 3464 232270260101 RST SM 0603 RC21 100R PM5 3465 212211805637 RST SM 0603 RC0603 22R PM5 3466 212211805637 RST SM 0603 RC0603 22R PM5 3467 212211805637 RST SM 0603 RC0603 22R PM5 3468 232270260101 RST SM 0603 RC21 100R PM5 3469 232270260101 RST SM 0603 RC21 100R PM5 3501 212211805639 RST SM 0603 RC0603 47R PM5 3502 212211805639 RST SM 0603 RC0603 47R PM5 3503 212211805639 RST SM 0603 RC0603 47R PM5 3511 232270260101 RST SM 0603 RC21 100R PM5 3512 232270260101 RST SM 0603 RC21 100R PM5 3513 232270260101 RST SM 0603 RC21 100R PM5 3514 232270260101 RST SM 0603 RC21 100R PM5 3515 232270260102 RST SM 0603 RC21 1K PM5 3516 212211805647 RST SM 0603 RC0603 220R PM5 3517 212211805647 RST SM 0603 RC0603 220R PM5 3518 212211805669 RST SM 0603 RC0603 10K PM5 3519 212211805669 RST SM 0603 RC0603 10K PM5 3521 212211805669 RST SM 0603 RC0603 10K PM5 3522 212211805669 RST SM 0603 RC0603 10K PM5 http://www.wjel.net 99 Go to cover page 170B6 LCD Spare Parts List(190B6) 3523 212211805669 RST SM 0603 RC0603 10K PM5 3531 212211805972 RST SM 1206 JUMP. MAX 0R05 3533 212211805678 RST SM 0603 RC0603 47K PM5 3534 232270260104 RST SM 0603 RC21 100K PM5 3535 212211805669 RST SM 0603 RC0603 10K PM5 5210 242254945579 IND FXD 1206 EMI 100MHZ 100R 5211 242254945579 IND FXD 1206 EMI 100MHZ 100R 5421 242254945579 IND FXD 1206 EMI 100MHZ 100R 5424 242254945579 IND FXD 1206 EMI 100MHZ 100R 5425 242254945579 IND FXD 1206 EMI 100MHZ 100R 5435 242254900113 IND FXD 0603 EMI 100MHZ 1K 5501 242254944196 IND FXD 0805 EMI 100MHZ 120R 5502 242254944196 IND FXD 0805 EMI 100MHZ 120R 5503 242254944196 IND FXD 0805 EMI 100MHZ 120R 5504 242254945579 IND FXD 1206 EMI 100MHZ 100R 5507 242254945579 IND FXD 1206 EMI 100MHZ 100R 5535 242254945579 IND FXD 1206 EMI 100MHZ 100R 6210 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6212 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6213 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6214 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6215 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6221 933137390215 DIO REG SM BZX84-C5V1 (PHSE) 6301 932209863685 DIO SIG SM BAV99 (VISH) 6302 932209863685 DIO SIG SM BAV99 (VISH) 6303 933976370215 DIO SIG SM BAT54C (PHSE) 6304 932209863685 DIO SIG SM BAV99 (VISH) 7301 313815861871 FLASH IC ASSY(7301) 7301 932220582682 IC SM NT68F633L (NOVA) 7341 313815861921 EE-PROM IC ASSY 7341 932218650682 IC AT24C16A-10PU-2.7 (ATME) 7401 823827716411 NT68563EF DVAL SXGA SCALER IC 7518 932217439685 TRA SIG SM BC857C (KEC0) 7519 932217439685 TRA SIG SM BC857C (KEC0) 7531 932216638668 FET POW SM SI5441DC-E3 (VISH) 7532 934036790115 TRA SIG SM PDTC114EK (PHSE) 7541 932222077668 IC SM AME1117ECGTZ (AME0) 7545 932222076668 IC SM AME1117CCGTZ (AME0) PCB Assy 1052 313815861791 AUDIO +CONTROL ASSY 2901 202203100261 ELCAP LZ 16V S 2200U PM20 2902 202203100237 ELCAP EB 16V S 1000U PM20 2903 222278015663 CER2 0805 X7R 16V 1U PM10 2904 223824619858 CER2 0603 Y5V 10V 470N P8020 2905 222278015663 CER2 0805 X7R 16V 1U PM10 2906 223886715101 CER1 0603 NP0 50V 100P PM5 2908 223824619858 CER2 0603 Y5V 10V 470N P8020 2910 223824619858 CER2 0603 Y5V 10V 470N P8020 2911 223824619858 CER2 0603 Y5V 10V 470N P8020 2912 223824619858 CER2 0603 Y5V 10V 470N P8020 2914 223824619858 CER2 0603 Y5V 10V 470N P8020 2916 223824619858 CER2 0603 Y5V 10V 470N P8020 2917 223824619858 CER2 0603 Y5V 10V 470N P8020 2918 202202000964 ELCAP SS-H 10V S 330U PM20 2919 223886715101 CER1 0603 NP0 50V 100P PM5 2920 223886715101 CER1 0603 NP0 50V 100P PM5 2921 223886715101 CER1 0603 NP0 50V 100P PM5 2922 223878615649 CER2 0603 X7R 16V 100N PM10 2923 223858615636 CER2 0603 X7R 50V 10N PM10 2924 222278015663 CER2 0805 X7R 16V 1U PM10 2925 222278015663 CER2 0805 X7R 16V 1U PM10 2926 223878615645 CER2 0603 X7R 16V 47N PM10 2927 223824619858 CER2 0603 Y5V 10V 470N P8020 2928 223858615636 CER2 0603 X7R 50V 10N PM10 2929 222278015663 CER2 0805 X7R 16V 1U PM10 2930 202202000964 ELCAP SS-H 10V S 330U PM20 2935 223858619812 CER2 0603 Y5V 50V 100N P8020 3903 212211805972 RST SM 1206 JUMP. MAX 0R05 3905 212211805972 RST SM 1206 JUMP. MAX 0R05 3908 212211805676 RST SM 0603 RC0603 33K PM5 3909 212211805681 RST SM 0603 RC0603 68K PM5 3914 232270260562 RST SM 0603 RC21 5K6 PM5 3915 232270260472 RST SM 0603 RC21 4K7 PM5 3916 232270260562 RST SM 0603 RC21 5K6 PM5 3917 232270260472 RST SM 0603 RC21 4K7 PM5 3921 232270260104 RST SM 0603 RC21 100K PM5 3922 232270260104 RST SM 0603 RC21 100K PM5 3923 212211805669 RST SM 0603 RC0603 10K PM5 3924 212211805669 RST SM 0603 RC0603 10K PM5 3925 232270296001 RST SM 0603 JUMP. MAX 0R05 3926 212211805669 RST SM 0603 RC0603 10K PM5 3927 212211805682 RST SM 0603 RC0603 82K PM5 3928 212211805673 RST SM 0603 RC0603 18K PM5 3929 232270260102 RST SM 0603 RC21 1K PM5 3930 232270260102 RST SM 0603 RC21 1K PM5 3935 232270260511 RST SM 0603 RC21 510R PM5 3936 232270260102 RST SM 0603 RC21 1K PM5 3938 232271161109 RST SM 1206 RC01 10R PM5 5901 242254900463 FIL MAINS 16MH 1A LS-PH04 5903 242254900126 IND FXD 0805 EMI 100MHZ 120R 5904 242254900126 IND FXD 0805 EMI 100MHZ 120R 5905 242254944197 IND FXD 0805 EMI 100MHZ 220R 5906 242254944197 IND FXD 0805 EMI 100MHZ 220R 5907 242254944197 IND FXD 0805 EMI 100MHZ 220R 5908 242254900064 IND FXD 0805 EMI 100MHZ 220R 5909 242254944197 IND FXD 0805 EMI 100MHZ 220R 5910 242254900064 IND FXD 0805 EMI 100MHZ 220R 5934 242254900126 IND FXD 0805 EMI 100MHZ 120R 5935 242254900126 IND FXD 0805 EMI 100MHZ 120R 6901 932220628682 DIO REC SB140AL-5301 (VISH) 7901 932219970668 IC SM TPA6030A4PWP (TI00) PCB Assy 1053 313815861681 CONTROL ASSY 3952 212211805678 RST SM 0603 RC0603 47K PM5 3953 212211805669 RST SM 0603 RC0603 10K PM5 3954 232270260102 RST SM 0603 RC21 1K PM5 3955 212211805678 RST SM 0603 RC0603 47K PM5 3956 212211805669 RST SM 0603 RC0603 10K PM5 3957 232270260102 RST SM 0603 RC21 1K PM5 6950 932214603682 LED VS L-3WYGW (KIEL) PCB Assy 1054 313815861771 USB ASSY 2801 222291016649 CER2 0805 X7R 25V 100N PM10 5801 242254943409 IND FXD 1206 EMI 100MHZ 50R 5802 242254943409 IND FXD 1206 EMI 100MHZ 50R http://www.wjel.net 100 Go to cover page 170B6 LCD Different Parts List(170B6) Diversity of 170B6CB/00 compared with 170B6CG/00 Item 12NC Description 863900016153 170B6CB/00 0030 313815758551 BEZEL ASSY(B) 0031 313815415281 BEZEL(B) 0040 313815758581 BACK COVER ASSY(B) 0041 313815415311 BACK COBER(B) 0050 313815756621 COMPACT BASE(B) 0101 313815412741 HINGE COVER(B) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000075 MAINSCORD IEC 10A 1M5 DET 3P B Diversity of 170B6CB/27 compared with 170B6CG/00 Item 12NC Description 863900016154 170B6CB/27 0030 313815758551 BEZEL ASSY(B) 0031 313815415281 BEZEL(B) 0040 313815758581 BACK COVER ASSY(B) 0041 313815415311 BACK COBER(B) 0050 313815756621 COMPACT BASE(B) 0101 313815412741 HINGE COVER(B) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000076 MAINSCORD UL 10A 1M5 DET 3P B 1062 242203300265 CON ACC ADP V 15P F MA-002 B 1063 313819872531 CORD USB A/1M8/USB B BK 1064 313818879281 CORD DVI 18+1/1M8/18+1 DVI BK Diversity of 170B6CB/69 compared with 170B6CG/00 Item 12NC Description 863900016347 170B6CB/69 0030 313815758551 BEZEL ASSY(B) 0031 313815415281 BEZEL(B) 0040 313815758581 BACK COVER ASSY(B) 0041 313815415311 BACK COBER(B) 0050 313815756621 COMPACT BASE(B) 0101 313815412741 HINGE COVER(B) 0451 313815639182 CUSHION-R 0452 313815639192 CUSHION-L 0602 313811708272 E-D.F.U. 0615 313811707781 HEX CODE OF F/W(NO MATL REQ) 1058 823827717711 LSP 16R 2W W/WIRE ASSY 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000081 MAINSCD UK/HK 10A 1M5 DET 3P B 1063 313819872531 CORD USB A/1M8/USB B BK Diversity of 170B6CB/75 compared with 170B6CG/00 Item 12NC Description 170B6CB/75 0030 313815758551 BEZEL ASSY(B) 0031 313815415281 BEZEL(B) 0040 313815758581 BACK COVER ASSY(B) 0041 313815415311 BACK COBER(B) 0050 313815756621 COMPACT BASE(B) 0101 313815412741 HINGE COVER(B) 0451 313815639182 CUSHION-R 0452 313815639192 CUSHION-L 0602 313811708272 E-D.F.U. 0615 313811707781 HEX CODE OF F/W(NO MATL REQ) 1058 823827717711 LSP 16R 2W W/WIRE ASSY 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 313819872291 MAINS CORD AUS/NZ 7A5 1M5 BK 1063 313819872531 CORD USB A/1M8/USB B BK Diversity of 170B6CB/93 compared with 170B6CG/00 Item 12NC Description 863900016155 170B6CB/93 0030 313815759991 BEZEL ASSY(B) 0031 313815416631 BEZEL(B) 0040 313815758581 BACK COVER ASSY(B) 0041 313815415311 BACK COBER(B) 0050 313815756621 COMPACT BASE(B) 0101 313815412741 HINGE COVER(B) 0450 313815640221 CARTON 0451 313815639182 CUSHION-R 0452 313815639192 CUSHION-L 0602 313811708272 E-D.F.U. 0615 313811707781 HEX CODE OF F/W(NO MATL REQ) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000078 MAINSCORD CHN 10A 1M5 DET 3P B 1063 313819872531 CORD USB A/1M8/USB B BK Diversity of 170B6CB/96 compared with 170B6CG/00 Item 12NC Description 863900016262 170B6CB/96 0030 313815758551 BEZEL ASSY(B) 0031 313815415281 BEZEL(B) 0040 313815758581 BACK COVER ASSY(B) 0041 313815415311 BACK COBER(B) 0050 313815756621 COMPACT BASE(B) 0101 313815412741 HINGE COVER(B) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000076 MAINSCORD UL 10A 1M5 DET 3P B 1063 313819872531 CORD USB A/1M8/USB B BK 1064 313818879281 CORD DVI 18+1/1M8/18+1 DVI BK Diversity of 170B6CG/93 compared with 170B6CG/00 Item 12NC Description 863900016161 170B6CG/93 0030 313815759981 BEZEL ASSY(T) 0031 313815416621 BEZEL(T) 0450 313815640221 CARTON 1061 242207000024 MAINSCORD CHN 10A 1M53 DET 3P 1063 313819872531 CORD USB A/1M8/USB B BK Diversity of 170B6CS/00 compared with 170B6CG/00 Item 12NC Description 863900016156 170B6CS/00 0030 313815758561 BEZEL ASSY(S) 0031 313815415291 BEZEL(S) 0040 313815758591 BEZEL COVER ASSY(S) 0041 313815415321 BACK COVER(S) 0050 313815756611 COMPACT BASE(S) 0101 313815412751 HINGE COVER(S) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000075 MAINSCORD IEC 10A 1M5 DET 3P B Diversity of 170B6CS/05 compared with 170B6CG/00 http://www.wjel.net 101 Go to cover page 170B6 LCD Different Parts List(170B6) Item 12NC Description 863900016157 170B6CS/05 0030 313815758561 BEZEL ASSY(S) 0031 313815415291 BEZEL(S) 0040 313815758591 BEZEL COVER ASSY(S) 0041 313815415321 BACK COVER(S) 0050 313815756611 COMPACT BASE(S) 0101 313815412751 HINGE COVER(S) 0451 313815639182 CUSHION-R 0452 313815639192 CUSHION-L 0602 313811708272 E-D.F.U. 0615 313811707781 HEX CODE OF F/W(NO MATL REQ) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000081 MAINSCD UK/HK 10A 1M5 DET 3P B 1063 313819872531 CORD USB A/1M8/USB B BK Diversity of 170B6CS/27 compared with 170B6CG/00 Item 12NC Description 863900016158 170B6CS/27 0030 313815758561 BEZEL ASSY(S) 0031 313815415291 BEZEL(S) 0040 313815758591 BEZEL COVER ASSY(S) 0041 313815415321 BACK COVER(S) 0050 313815756611 COMPACT BASE(S) 0101 313815412751 HINGE COVER(S) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000076 MAINSCORD UL 10A 1M5 DET 3P B 1062 242203300265 CON ACC ADP V 15P F MA-002 B Diversity of 170B6CS/69 compared with 170B6CG/00 Item 12NC Description 863900016348 170B6CS/69 0030 313815758561 BEZEL ASSY(S) 0031 313815415291 BEZEL(S) 0040 313815758591 BEZEL COVER ASSY(S) 0041 313815415321 BACK COVER(S) 0050 313815756611 COMPACT BASE(S) 0101 313815412751 HINGE COVER(S) 0451 313815639182 CUSHION-R 0452 313815639192 CUSHION-L 0602 313811708272 E-D.F.U. 0615 313811707781 HEX CODE OF F/W(NO MATL REQ) 1058 823827717711 LSP 16R 2W W/WIRE ASSY 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000081 MAINSCD UK/HK 10A 1M5 DET 3P B 1063 313819872531 CORD USB A/1M8/USB B BK REF 12NC Description 1 863900016262 170B6CB/96 2 863900016263 170B6CS/96 REF Action Item 12NC Description 242207000076 MAINSCORD UL 10A 1M5 DET 3P B 313812874881 MAIN CORD To 1061 823827732108 1M5 MAINSCORD TWN 7A 3P B ALL From 1061 According to the ECO-CA006133,170B6CB/96,170B6CS/96 have been changed. The difference is as the following. Diversity of 170B6CS/10 compared with 170B6CG/00 Item 12NC Description 863900016691 170B6CS/10 0030 313815758561 BEZEL ASSY(S) 0031 313815415291 BEZEL(S) 0040 313815758591 BEZEL COVER ASSY(S) 0041 313815415321 BACK COVER(S) 0050 313815756612 COMPACT BASE(S) 0101 313815412751 HINGE COVER(S) 0126 313815566183 RATING LABEL 0295 313815566212 LABEL-EEPROM(Q) 0450 313815641191 CARTON 0451 313815639183 CUSHION-R 0452 313815639193 CUSHION-L 0602 313811708911 E-D.F.U. 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000081 MAINSCD UK/HK 10A 1M5 DET 3P B Diversity of 170B6CS/75 compared with 170B6CG/00 Item 12NC Description 863900016567 170B6CS/75 0030 313815758561 BEZEL ASSY(S) 0031 313815415291 BEZEL(S) 0040 313815758591 BEZEL COVER ASSY(S) 0041 313815415321 BACK COVER(S) 0050 313815756611 COMPACT BASE(S) 0101 313815412751 HINGE COVER(S) 0126 313815566183 RATING LABEL 0602 313811708274 E-D.F.U. 0615 313811707781 HEX CODE OF F/W(NO MATL REQ) 1055 823827717131 LIPS(EADP-43AF A) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 313819872291 MAINS CORD AUS/NZ 7A5 1M5 BK http://www.wjel.net 102 Go to cover page 170B6 LCD Different Parts List(150B6) Diversity of 150B6CB/00 compared with 150B6CG/00 Item 12NC Description 863900016169 150B6CB/00 0030 313815759061 BEZEL ASSY(B) 0031 313815412552 BEZEL(B) 0032 313815415841 BUTTON-POWER 0033 313815415851 FUNCTION KEYS 0035 313815411761 STRIP 0040 313815756791 BACK COVER ASSY(B) 0041 313815412571 BACK COVER(B) 0050 313815756741 COMPACT BASE(B) 0101 313815412591 HINGE COVER(B) 1157 242207000075 MAINSCORD IEC 10A 1M5 DET 3P B 1158 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1162 313818875051 SPEAKER CABLE(BLACK) Diversity of 150B6CB/93 compared with 150B6CG/00 Item 12NC Description 863900016214 150B6CB/93 0030 313815759911 BEZEL ASSY(B) 0031 313815416521 BEZEL (B) 0032 313815415841 BUTTON-POWER 0033 313815415851 FUNCTION KEYS 0035 313815411761 STRIP 0040 313815756791 BACK COVER ASSY(B) 0041 313815412571 BACK COVER(B) 0050 313815756741 COMPACT BASE(B) 0099 313810167901 ALUMINUM FOIL 0100 313815137311 SHIELDING 0101 313815412591 HINGE COVER(B) 0450 313815639591 CARTON 0451 313815639791 CUSHION-R 0452 313815639781 CUSHION-L 1157 242207000078 MAINSCORD CHN 10A 1M5 DET 3P B 1158 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1162 313818875051 SPEAKER CABLE(BLACK) Diversity of 150B6CG/93 compared with 150B6CG/00 Item 12NC Description 863900016215 150B6CG/93 0030 313815759901 BEZEL ASSY(T) 0031 313815416511 BEZEL(T) 0450 313815639591 CARTON 0451 313815639791 CUSHION-R 0452 313815639781 CUSHION-L 1157 242207000024 MAINSCORD CHN 10A 1M53 DET 3P Diversity of 150B6CS/00 compared with 150B6CG/00 Item 12NC Description 863900016213 150B6CS/00 0030 313815756761 BEZEL ASSY(S) 0031 313815412562 BEZEL(S) 0032 313815411781 BUTTON-POWER 0033 313815411771 FUNCTION KEYS 0040 313815756771 BACK COVER ASSY(S) 0041 313815412581 BACK COVER(S) 0050 313815756751 COMPACT BASE(S) 0101 313815412601 HINGE COVER(S) 1157 242207000075 MAINSCORD IEC 10A 1M5 DET 3P B 1158 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1162 313818875051 SPEAKER CABLE(BLACK) Diversity of 150B6CS/69 compared with 150B6CG/00 Item 12NC Description 863900016346 150B6CS/69 0030 313815756761 BEZEL ASSY(S) 0031 313815412562 BEZEL(S) 0032 313815411781 BUTTON-POWER 0033 313815411771 FUNCTION KEYS 0040 313815756771 BACK COVER ASSY(S) 0041 313815412581 BACK COVER(S) 0050 313815756751 COMPACT BASE(S) 0101 313815412601 HINGE COVER(S) 1157 242207000081 MAINSCD UK/HK 10A 1M5 DET 3P B 1158 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1162 313818875051 SPEAKER CABLE(BLACK) Diversity of 150B6CS/75 compared with 150B6CG/00 Item 12NC Description 863900016227 150B6CS/75 0030 313815756761 BEZEL ASSY(S) 0031 313815412562 BEZEL(S) 0032 313815411781 BUTTON-POWER 0033 313815411771 FUNCTION KEYS 0040 313815756771 BACK COVER ASSY(S) 0041 313815412581 BACK COVER(S) 0050 313815756751 COMPACT BASE(S) 0101 313815412601 HINGE COVER(S) 1157 313819872291 MAINS CORD AUS/NZ 7A5 1M5 BK 1158 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1162 313818875051 SPEAKER CABLE(BLACK) http://www.wjel.net 103 Go to cover page 170B6 LCD Different Parts List(190B6) Diversity of 190B6CB/00 compared with 190B6CG/00 Item 12NC Description 863900016194 190B6CB/00 0030 313815759471 FRONT BEZEL ASSY(B) 0031 313815416171 BEZEL(B) 0032 313815413031 STRIP-DECORATION (B) 0033 313815416071 BUTTON-CONTROL(B) 0040 313815759381 BACK COVER ASSY(B)-LPL 0040 313815759371 BACK COVER ASSY(B)-AU 0041 313815416111 BACK COVER(B)-LPL 0041 313815416101 BACK COVER(B)-AU 0042 313815411891 PLATE-VENT 0050 313815759331 COMPACT BASE(B) 0094 313815413011 HINGE COVER (B) 1058 823827717951 LSP BOX 16R 2W (P2831E) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819875131 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000075 MAINSCORD IEC 10A 1M5 DET 3P B 1201 242202518432 SOC SUBD H 15P F SBFR Y 1202 242203300521 SOC DVI H 24P F 1.91DVI-D Y 1341 243803100435 SOC IC V 8P F 2.54 DIL L 1352 243854300079 RES XTL SM 12MHZ 32P SMD-49 R 1451 242202519002 CON H 30P F 1.00 SM FFC 0.3 R 1501 242202518824 CON V 11P M 2.00 63391 B 1511 242202519001 CON V 11P M 2.00 61391 B 1801 242202518955 SOC USB V 4P F 2.5 5411 Y 1802 242202518875 SOC USB H 4P F 2.0 5401 Y 1905 242202605588 SOC PHONE V 1P F 3.5 ST B 1911 242202518814 CON V 2P M 2.00 63382 B 1912 242202518814 CON V 2P M 2.00 63382 B 1921 242202605594 SOC PHONE V 1P F 3.5 ST BK B 1935 242202518816 CON V 4P M 2.00 63384 B Diversity of 190B6CB/27 compared with 190B6CG/00 Item 12NC Description 863900016195 190B6CB/27 0030 313815759471 FRONT BEZEL ASSY(B) 0031 313815416171 BEZEL(B) 0032 313815413031 STRIP-DECORATION (B) 0033 313815416071 BUTTON-CONTROL(B) 0040 313815759381 BACK COVER ASSY(B)-LPL 0040 313815759371 BACK COVER ASSY(B)-AU 0041 313815416111 BACK COVER(B)-LPL 0041 313815416101 BACK COVER(B)-AU 0042 313815411891 PLATE-VENT 0050 313815759331 COMPACT BASE(B) 0094 313815413011 HINGE COVER (B) 1058 823827717951 LSP BOX 16R 2W (P2831E) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819875131 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000076 MAINSCORD UL 10A 1M5 DET 3P B 1062 242203300265 CON ACC ADP V 15P F MA-002 B 1064 313818879281 CORD DVI 18+1/1M8/18+1 DVI BK 1201 242202518432 SOC SUBD H 15P F SBFR Y 1202 242203300521 SOC DVI H 24P F 1.91DVI-D Y 1341 243803100435 SOC IC V 8P F 2.54 DIL L 1352 243854300079 RES XTL SM 12MHZ 32P SMD-49 R 1451 242202519002 CON H 30P F 1.00 SM FFC 0.3 R 1501 242202518824 CON V 11P M 2.00 63391 B 1511 242202519001 CON V 11P M 2.00 61391 B 1801 242202518955 SOC USB V 4P F 2.5 5411 Y 1802 242202518875 SOC USB H 4P F 2.0 5401 Y 1905 242202605588 SOC PHONE V 1P F 3.5 ST B 1911 242202518814 CON V 2P M 2.00 63382 B 1912 242202518814 CON V 2P M 2.00 63382 B 1921 242202605594 SOC PHONE V 1P F 3.5 ST BK B 1935 242202518816 CON V 4P M 2.00 63384 B Diversity of 190B6CS/00 compared with 190B6CG/00 Item 12NC Description 863900016191 190B6CS/00 0030 313815759481 FRONT BEZEL ASSY(S) 0031 313815416181 BEZEL(S) 0033 313815416061 BUTTON-CONTROL(S) 0040 313815759361 BACK COVER ASSY(S)-LPL 0040 313815759351 BACK COVER ASSY(S)-AU 0041 313815416091 BACK COVER(S)-LPL 0041 313815416081 BACK COVER(S)-AU 0042 313815411951 PLATE-VENT 0050 313815759341 COMPACT BASE(S) 0094 313815413021 HINGE COVER (S) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819875131 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000075 MAINSCORD IEC 10A 1M5 DET 3P B 1201 242202518432 SOC SUBD H 15P F SBFR Y 1202 242203300521 SOC DVI H 24P F 1.91DVI-D Y 1341 243803100435 SOC IC V 8P F 2.54 DIL L 1352 243854300079 RES XTL SM 12MHZ 32P SMD-49 R 1451 242202519002 CON H 30P F 1.00 SM FFC 0.3 R 1501 242202518824 CON V 11P M 2.00 63391 B 1511 242202519001 CON V 11P M 2.00 61391 B 1801 242202518955 SOC USB V 4P F 2.5 5411 Y 1802 242202518875 SOC USB H 4P F 2.0 5401 Y 1905 242202605588 SOC PHONE V 1P F 3.5 ST B 1911 242202518814 CON V 2P M 2.00 63382 B 1912 242202518814 CON V 2P M 2.00 63382 B 1921 242202605594 SOC PHONE V 1P F 3.5 ST BK B 1935 242202518816 CON V 4P M 2.00 63384 B Diversity of 190B6CS/27 compared with 190B6CG/00 Item 12NC Description 863900016193 190B6CS/27 0030 313815759481 FRONT BEZEL ASSY(S) 0031 313815416181 BEZEL(S) 0033 313815416061 BUTTON-CONTROL(S) 0040 313815759351 BACK COVER ASSY(S)-AU 0040 313815759361 BACK COVER ASSY(S)-LPL 0041 313815416081 BACK COVER(S)-AU 0041 313815416091 BACK COVER(S)-LPL 0042 313815411951 PLATE-VENT 0050 313815759341 COMPACT BASE(S) 0094 313815413021 HINGE COVER (S) 1058 823827717951 LSP BOX 16R 2W (P2831E) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819875131 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000076 MAINSCORD UL 10A 1M5 DET 3P B 1062 242203300265 CON ACC ADP V 15P F MA-002 B 1064 313818879281 CORD DVI 18+1/1M8/18+1 DVI BK 1201 242202518432 SOC SUBD H 15P F SBFR Y 1202 242203300521 SOC DVI H 24P F 1.91DVI-D Y 1341 243803100435 SOC IC V 8P F 2.54 DIL L 1352 243854300079 RES XTL SM 12MHZ 32P SMD-49 R 1451 242202519002 CON H 30P F 1.00 SM FFC 0.3 R 1501 242202518824 CON V 11P M 2.00 63391 B 1511 242202519001 CON V 11P M 2.00 61391 B 1801 242202518955 SOC USB V 4P F 2.5 5411 Y 1802 242202518875 SOC USB H 4P F 2.0 5401 Y 1905 242202605588 SOC PHONE V 1P F 3.5 ST B 1911 242202518814 CON V 2P M 2.00 63382 B 1912 242202518814 CON V 2P M 2.00 63382 B 1921 242202605594 SOC PHONE V 1P F 3.5 ST BK B 1935 242202518816 CON V 4P M 2.00 63384 B http://www.wjel.net 104 Go to cover page 170B6 LCD Different Parts List(190B6) Diversity of 190B6CS/96 compared with 190B6CG/00 Item 12NC Description 863900016345 190B6CS/96 0030 313815759481 FRONT BEZEL ASSY(S) 0031 313815416181 BEZEL(S) 0033 313815416061 BUTTON-CONTROL(S) 0040 313815759351 BACK COVER ASSY(S)-AU 0040 313815759361 BACK COVER ASSY(S)-LPL 0041 313815416081 BACK COVER(S)-AU 0041 313815416091 BACK COVER(S)-LPL 0042 313815411951 PLATE-VENT 0050 313815759341 COMPACT BASE(S) 0094 313815413021 HINGE COVER (S) 1058 823827717951 LSP BOX 16R 2W (P2831E) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819875131 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000076 MAINSCORD UL 10A 1M5 DET 3P B 1064 313818879281 CORD DVI 18+1/1M8/18+1 DVI BK 1201 242202518432 SOC SUBD H 15P F SBFR Y 1202 242203300521 SOC DVI H 24P F 1.91DVI-D Y 1341 243803100435 SOC IC V 8P F 2.54 DIL L 1352 243854300079 RES XTL SM 12MHZ 32P SMD-49 R 1451 242202519002 CON H 30P F 1.00 SM FFC 0.3 R 1501 242202518824 CON V 11P M 2.00 63391 B 1511 242202519001 CON V 11P M 2.00 61391 B 1801 242202518955 SOC USB V 4P F 2.5 5411 Y 1802 242202518875 SOC USB H 4P F 2.0 5401 Y 1905 242202605588 SOC PHONE V 1P F 3.5 ST B 1911 242202518814 CON V 2P M 2.00 63382 B 1912 242202518814 CON V 2P M 2.00 63382 B 1921 242202605594 SOC PHONE V 1P F 3.5 ST BK B 1935 242202518816 CON V 4P M 2.00 63384 B According to the ECO-CA006133,190B6CS/96 has been changed. The difference is as the following. REF 12NC Description 1 863900016345 190B6CS/96 REF Action Item 12NC Description 242207000076 MAINSCORD UL 10A 1M5 DET 3P B 313812874881 MAIN CORD To 1061 823827732108 1M5 MAINSCORD TWN 7A 3P B ALL From 1061 Diversity of 190B6CB/75 compared with 190B6CG/00 Item 12NC Description 863900016565 190B6CB/75 0030 313815759471 FRONT BEZEL ASSY(B) 0031 313815416171 BEZEL(B) 0032 313815413031 STRIP-DECORATION (B) 0033 313815416071 BUTTON-CONTROL(B) 0040 313815759371 BACK COVER ASSY(B)-AU 0040 313815759381 BACK COVER ASSY(B)-LPL 0041 313815416101 BACK COVER(B)-AU 0041 313815416111 BACK COVER(B)-LPL 0042 313815411891 PLATE-VENT 0050 313815759331 COMPACT BASE(B) 0094 313815413011 HINGE COVER (B) 0126 313815566943 RATING LABEL 0602 313811708293 E-DFU 1055 823827717131 LIPS(EADP-43AF A) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000045 MAINSCORD AUS/NZ 1M53 DET 3P B Diversity of 190B6CB/93 compared with 190B6CG/00 Item 12NC Description 863900016748 190B6CB/93 0030 313815760801 FRONT BEZEL ASSY(B) 0031 313815417521 BEZEL(B) 0032 313815413031 STRIP-DECORATION (B) 0033 313815416071 BUTTON-CONTROL(B) 0040 313815759381 BACK COVER ASSY(B)-LPL 0040 313815759371 BACK COVER ASSY(B)-AU/LPL-TL 0041 313815416111 BACK COVER(B)-LPL 0041 313815416101 BACK COVER(B)-AU 0042 313815411891 PLATE-VENT 0050 313815759331 COMPACT BASE(B) 0094 313815413011 HINGE COVER (B) 0126 313815566945 RATING LABEL 0291 313815566913 LABEL-CPU 0295 313815566922 LABEL-EEPROM-LPL 0295 313815566932 LABEL-EEPROM-AU 0450 313815641511 CARTON 0490 313815682971 PACKING ASSY-CHINA 0505 313815641511 CARTON 0602 313811708295 E-DFU 0615 313811707773 HEX CODE OF F/W(NO MATL REQ) 1050 932222956682 TFT-LCD M190EN04V5 (AUOP) B 1050 823827718291 LCD LM190E03-TLB4 1055 313819875862 PSU OPENFR IIPS 43W(AIP-0093) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000078 MAINSCORD CHN 10A 1M5 DET 3P B 7401 932222775671 IC SM NT68563EFG/D (NOVA) Y Diversity of 190B6CS/75 compared with 190B6CG/00 Item 12NC Description 863900016566 190B6CS/75 0040 313815759361 BACK COVER ASSY(S)-LPL 0041 313815416091 BACK COVER(S)-LPL 0042 313815411951 PLATE-VENT 1055 823827717131 LIPS(EADP-43AF A) 1059 313818875051 SPEAKER CABLE(BLACK) 1060 313819874961 CORD SUB-D 15/1M5/SUB-D 15 BK 1061 242207000045 MAINSCORD AUS/NZ 1M53 DET 3P B 0030 313815759481 FRONT BEZEL ASSY(S) 0031 313815416181 BEZEL(S) 0033 313815416061 BUTTON-CONTROL(S) 0050 313815759341 COMPACT BASE(S) 0094 313815413021 HINGE COVER (S) 0126 313815566902 RATING LABEL 0602 313811708293 E-DFU 0040 313815759351 BACK COVER ASSY(S)-AU 0041 313815416081 BACK COVER(S)-AU http://www.wjel.net 105 Go to cover page 170B6 LCD Repair Tips 0. Warning All ICs and many other semi-conductors are susceptible to electrostatic discharges (ESD). Careless handling during repair can reduce life drastically. When repairing, make sure that you are connected with the same potential as the mass of the unit via a wrist wrap with resistance. Keep components and tools also at the same potential ! 1. Servicing of SMDs (Surface Mounted Devices) 1.1 General cautions on handling and storage - Oxidation on the terminals of SMDs results in poor soldering. Do not handle SMDs with bare hands. - Avoid using storage places that are sensitive to oxidation such as places with sulphur or chlorine gas, direct sunlight, high temperatures or a high degree of humidity. The capacitance or resistance value of the SMDs may be affected by this. - Rough handling of circuit boards containing SMDs may cause damage to the components as well as the circuit boards. Circuit boards containing SMDs should never be bent or flexed. Different circuit board materials expand and contract at different rates when heated or cooled and the components and/or solder connections may be damaged due to the stress. Never rub or scrape chip components as this may cause the value of the component to change. Similarly, do not slide the circuit board across any surface. 1.2 Removal of SMDs - Heat the solder (for 2-3 seconds) at each terminal of the chip. By means of litz wire and a slight horizontal force, small components can be removed with the soldering iron. They can also be removed with a solder sucker (see Fig. 1A) While holding the SMD with a pair of tweezers, take it off gently using the soldering iron's heat applied to each terminal (see Fig. 1 B). - Remove the excess solder on the solder lands by means of litz wire or a solder sucker (see Fig. 1C). 1.3 Caution on removal - When handling the soldering.iron. use suitable pressure and be careful. - When removing the chip, do not use undue force with the pair of tweezers. - The soldering iron to be used (approx. 30 W) should preferably be equipped with a thermal control (soldering temperature: 225 to 250 C). - The chip, once removed, must never be reused. 1.4 Attachment of SMDs - Locate the SMD on the solder lands by means of tweezers and solder the component on one side. Ensure that the component is positioned correctly on the solder lands (see Fig.2A). - Next complete the soldering of the terminals of the component (see Fiq. 2B). 2. Caution when attaching SMDs - When soldering the SMD terminals, do not touch them directly with the soldering iron. The soldering should be done as quickly as possible, care must be taken to avoid damage to the terminals of the SMDs themselves. - Keep the SMD's body in contact with the printed board when soldering. - The soldering iron to be used (approx. 30 W ) should preferably be equipped with a thermal control (soldering temperature: 225 to 250 C). - Soldering should not be done outside the solder land. - Soldering flux (of rosin) may be used, but should not be acidic. - After soldering, let the SMD cool down gradually at room temperature. - The quantity of solder must be proportional to the size of the solder land. If the quantity is too great, the SMD might crack or the solder lands might be torn loose from the printed board (see Fig. 3). Fig.3 Examples Right http://www.wjel.net 106 Go to cover page 170B6 LCD Repair Tips 3. Lead-free product identification You can identify lead-free product by Philips-lead-free logo on PCB. 4. Lead-free product repair instruction 4.1 Use only lead-free Solder Alloy 0622 149 00106(1.2mm SAC305) or 0622 14900108(1.0mm SAC305). Remark: For lead free soldering material, please visit website for details. This is recommended by Philips. 4.2 Use only adequate solder tools applicable for lead-free soldering-tin. The solder tool must be able to reach at least a solder-temperature of 400 , to stabilize the adjusted temperature at the solder-tip and to exchange solder-tips for different applications. Small Passives/Actives to be removed with thermal tweezers Automated system for IC and BGA repair (Microscope, Camera, Beam split optics, Computer, Programmer, Heat controllers, Vacuum system, Laser pointer) Solder Hand-Tool (Adjustable in temperature height, Temperature shall be held constant,Flexible tips) 4.3 Adjust your solder tool so that a temperature around 360 -380 is reached and stabilized at the solder joint. Heating-time of the solder-joint should not exceed ~ 4 sec. Avoid temperatures above 400 otherwise wear-out of tips will rise drastically and flux-fluid will be destroyed.Corrosion of Tool-Spikes can be avoided when using SAC305 and a temperature of less than 400 . 4.4 Mix of lead-free solder-tin/parts with leaded soldering-tin/parts is possible but not recommended. If not to avoid clean carefully the solder-joint from old tin and re-solder with new tin. 4.5 Use only original spare-parts listed in the Service-Manuals. Standard-material(consumables) can also be purchased at external companies. 4.6 Special information for lead-free BGA-ICs: this ICs will be delivered in so-called dry-packaging to protect the IC against moisture and with lead-free logo on it. This packaging may only be opened shortly before it is used (soldered). Otherwise the body of the IC gets wet inside and during the heating time the structure of the IC will be destroyed due to high (steam-)pressure. If the packaging was opened before usage the IC has to be heated up for some hours (around 90 ) for drying (Take attention for ESD-protection!) 5. Rework on BGA (Ball Grid Array) ICs General Although (LF)BGA assembly yields are very high, there may still be a requirement for component rework. By rework, we mean the process of removing the component from the PWB and replacing it with a new component. If an (LF)BGA is removed from a PWB, the solder balls of the component are deformed drastically so the removed (LF)BGA has to be discarded. Device Removal As is the case with any component that, it is essential when removing an (LF)BGA, the board, tracks, solder lands, or surrounding components are not damaged. To remove an (LF)BGA, the board must be uniformly heated to a temperature close to the reflow soldering temperature. A uniform temperature reduces the chance of warping the PWB. To do this, we recommend that the board is heated until it is certain that all the joints are molten. Then carefully pull the component off the board with a vacuum nozzle. For the appropriate temperature profiles, see the IC data sheet. Area Preparation When the component has been removed, the vacant IC area must be cleaned before replacing the (LF)BGA. Removing an IC often leaves varying amounts of solder on the mounting lands. This excessive solder can be removed with either a solder sucker or solder wick. The remaining flux can be removed with a brush and cleaning agent. After the board is properly cleaned and inspected, apply flux on the solder lands and on the connection balls of the(LF)BGA Note: Do not apply solder paste, as this has shown to result in problems during re-soldering. Device Replacement The last step in the repair process is to solder the new component on the board. Ideally, the (LF)BGA should be aligned under a microscope or magnifying glass. If this is not possible, try to align the (LF)BGA with any board markers. To reflow the solder, apply a temperature profile according to the IC data sheet. So as not to damage neighbouring components, it may be necessary to reduce some tempera www.alphametals.com More Information For more information on how to handle BGA devices, visit this URL: http://www.atyourservice.ce.philips.com (needs subscription). After login, select Magazine , then go to Workshop Information . Here you will find Information on how .to deal with BGA-ICs. http://www.wjel.net 107 Go to cover page 170B6 LCD Repair Flow Chart AC IN Power Board Control Board Scaler Board LCD Panel No power (power indicator off) Check 12V/5V/3.3V 6 9 11 1 12V 5V Connector 301 NG Bad power board Check Control Board Check Control Wires Check Scaler Board OK NG OK Bad Scaler Board Check LCD Panel OK http://www.wjel.net 108 Go to cover page 170B6 LCD Repair Flow Chart Power Board Bad Power Board OK NG OK OK Check Scaler Board Bad Scaler Board OK OK http://www.wjel.net 109 Go to cover page 170B6 LCD Repair Flow Chart Check Power Board OK Check LCD Panel OK NO OK Control Board OK OK Board http://www.wjel.net TELEVISION/MONITOR SAFFTY GUIDELINES FOR THE PROFESSIONAL SERVICE TECHNICIAN Safety Checks Fire and Shock Hazard Implosion X-radiation After the original service problem has been corrected,a complete safety check should be made. Be sure to check over the entire set, not just the areas where you have worked. Some previous servicer may have left an unsafe condition,which could be unknowingly passed on to your customer. Be sure to check all of the following: 1. Be sure all components are positioned in such a way as to avoid the possibility of adjacent component shorts. This is especially important on those chassis which are transported to and from the service shop. 2. Never release a repaired unit unless all protective devices such as insulators, barries, covers, strain reliefs, and other hardware have been installed in accordance with the original design. 3. Soldering and wiring must be inspected to locate possible cold solder joints,solder splashes,sharp solder points, frayed leads, pinched leads, or damaged insulation ( including the ac cord).Be certain to remove loose solder balls and all other loose foreign particles. 4. Check across-the-line components and other components for physical evidence of damage or deterioration and replace if necessary. Follow original layout,lead length, and dress. 5. No lead or component should touch a receiving tube or a resistor rated at 1 watt or more. Lead tension around protruding metal surfaces or edges must be avoided. 6. Critical components having special safety characteristics are identified with ans by the Ref. No. in the parts list and enclosed within a broken line * (where several critical components are grouped in one area) along with the safety symbols on the schematic diagrams and/or exploded views. 7. When servicing any unit, always use a separate isolation transformer for the chassis Failure to use a separate isolation transformer may expose you to possible shock hazard, and may cause damage to servicing instruments. 8. Many electronic products use a polarized ac line cord (one wide pin on the plug.) Defeating this safety feature may create a potential hazard to the service and the user. Extension cords which do not incorporate the polarizing feature should never be used. 9. After reassembly of the unit, always perform an leakage test or resistance test from the line cord to all exposed metal parts of the cabinet. Also check all metal control shafts(with knobs removed), antenna terminals, handles, screws, etc. to be sure the unit may be safety operated without danger of electrical shock. * Broken line 1. All picture tubes used in current model receivers are equipped with an integral implosion system. Care should always be used, and safety glasses worn,whenever handling any picture tube. Avoid scratching or otherwise damaging the picture tube during installation. 2. Use only replacement tubes specified by the manufacturer. 1. Be sure procedures and instructions to all your service personnel cover the subject of X-radiation. Potential sources of X-rays in TV receivers are the picture tube and the high voltage circuits. The basic precaution which must be exercised is to keep the high voltage at the factory recommended level. 2. To avoid possible exposure to X-radiation and electrical shock, only the manufacturer's specified anode connectors must be used. 3. It is essential that the service technician has an accurate HV meter available at all times. The calibration of this meter should be checked periodically against a reference standard. 4. When the HV circuitry is operating properly there is no possibility of an x- radiation problem. High voltage should always be kept at the manufacturer's rated value-no higher - for optimum performance. Every time a color set is serviced, the brightness should be run up and down while monitoring the HV with a meter to be certain that the HV is regulated correctly and does not exceed the specified value. We suggest that you and your technicians review test procedures so that HV and HV regulation are always checked as a standard servicing procedure, and the reason for this prudent routine is clearly understood by everyone. It is important to use an accurate and reliable HV meter. It is recommended that the HV recorded on each customer's invoice, which will demonstrate a proper concern for the customer's safety. 5. When troubleshooting and making test measurements in a receiver with a problem of excessive high voltage, reduce the line voltage by means of a Variac to bring the HV into acceptable limits while troubleshooting. Do : : WARNING OFF SERVICE NOTE Before removing the CRT anode cap, turn the unit and short the HIGH VOLTAGE to the CRT DAG ground. The CRT DAG is not at chassis ground. 6. New picture tubes are specifically designed to withstand higher operathng voltages without creating undesirable X-radiation. It is strongly recommended that any shop test fixture which is to be used with the new higher voltage chassis be equipped with one of the new type tubes designed for this service. Addition of a permanently connected HV meter to the shop test fixture is advisable. The CRT types used in these new sets should never be replaced with any other types, as this may result in excessive X-radiation. 7. It is essential to use the specified picture tube to avoid a possible X-diation problem. 8. Most TV receivers contain some type of emergency "Hold Down" circuit to prevent HV from rising to excessive levels in the presence of a failure mode. These various circuits should be understood by all technicians servicing them, especially since many hold down circuits are inoperative as long as the receiver performs normally. 1. Unplug the ac line cord and connect a jumper between the two prongs of the plug. 2. Turn on the power switch. 3. Measure the resistance value between the jumpered ac plug and all exposed cabinet parts of the receiver, such as screw heads, antennas, and control shafts. When the exposed metallic part has a return path to the chassis, the reading should be between 1 megohm and 5.2 megohms. When the exposed metal does not have a return path to the chassis, the reading must be infinity. Remove the jumper from the ac line cord. 1. Do not use an isolation transformer for this test. Plug the completely reassembled receiver directly into the ac outlet. 2. Connect a 1.5k, 10w resistor paralleled by a 0.15uf. capacitor between each exposed metallic cabinet part and a good earth ground such as a water pipe, as shown above. 3. Use an ac voltmeter with at least 5000 ohms volt sensitivity to measure the potential across the resistor. 4. The potential at any point should not exceed 0.75 volts. A leakage current tester may be used to make this test; leakage current must not exceed 0.5 milliamps. If a measurement is outside of the specified limits, there is a possibility of shock hazard. The receiver should be repaired and rechecked before returning it to the customer. 5. Repeat the above procedure with the ac plug reversed.( Note: An ac adapter is necessary when a polarized plug is used. Do not defeat the polarizing feature of the plug.) The primary source of X-radiation in this television receiver is the picture tube. The picture tube utilized in this chassis is specially constructed to limit X-radiation emissions. For continued X-radiation protection, the replacement tube must be the same type as the original, including suffix letter, or a Philips approved type. Many electrical and mechanical parts in Philips television sets have special safety related characteristics. These characteristics are often not evident from visual inspection nor can the protection afforded by them necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. The use of a substitute part which does not have the same safety characteristics as the Philips recommended replacement part shown in this service manual may create shock, fire, or other hazards Leakage Current Cold Check Leakage Current Hot Check Picture Tube Replacement Parts Replacement 1500 ohm, 10W 0.15 uF WATER PIPE EARTH GROUND TO INSTRUMENTS EXPOSED METAL PARTS http://www.wjel.net 家电维修资料网    www.520101.com                    免费下载各类电器说明书  www.520101.com